scholarly journals Sustainable Magnetic Materials (from Chitosan and Municipal Biowaste) for the Removal of Diclofenac from Water

Nanomaterials ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 1091 ◽  
Author(s):  
Roberto Nisticò ◽  
Alessandra Bianco Prevot ◽  
Giuliana Magnacca ◽  
Lorenzo Canone ◽  
Sara García-Ballesteros ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Low Temperature ◽  
Magnetic Materials ◽  
Hybrid Materials ◽  
Inorganic Salts ◽  
Photo Degradation ◽  
Inorganic Hybrid ◽  
Organic Products ◽  
Coprecipitation Synthesis

The photodegradation of an aqueous solution of diclofenac (DCF) has been attempted in the presence of hydrogen peroxide and organic/inorganic hybrid magnetic materials under simulated and real solar light. The hybrid magnetic materials have been prepared via coprecipitation synthesis starting from iron(II) and iron(III) inorganic salts in the presence of bioderived organic products (i.e., chitosan or bio-based substances isolated from commercially available composted urban biowastes) acting as stabilizers of the iron-containing phase. In addition to the as prepared hybrid materials, the corresponding materials obtained after a pyrolytic step at low temperature (550 °C) have been tested. The obtained results evidenced the capability of the materials to activate hydrogen peroxide at mild pH promoting DCF (photo) degradation. All the materials feature also as adsorbents since a decrease of DCF is observed also when working in the dark and in the absence of hydrogen peroxide.

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

Photo-degradation of monoazo dye blue 13 using advanced oxidation process

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Aqueous Solution ◽  
Advanced Oxidation Process ◽  
Oxidation Process ◽  
High Energy ◽  
Uv Exposure ◽  
H2o2 Concentration ◽  
Oxidizing Agent ◽  
Photo Degradation ◽  
High Energy Radiation ◽  
Uv Lamp

The high energy radiation overcome the bonding of solute in a solution and H2O2 acts as an oxidizing agent and generates a free radical in the solution which results in photo-degradation by converting the solute in to simple form and resultantly, colored substance under the effect of photo-degradation becomes colorless. The photo-degradation of monoazo dye Blue 13 in an aqueous solution was investigated using a laboratory scale UV lamp in the presence of H2O2 and for maximum degradation of dye, the independent parameter UV power, UV exposure time, pH and H2O2 concentration were optimized. It was found that neither UV in the presence of H2O2 is able to degrade Blue 13 under optimum condition. The results revealed that the use of both UV and H2O2 have pronounced effect on the discoloration of dyes which could be used for management of textile effluents contain waste dyes.

Ecosustainable Development of Novel Bio-inorganic Hybrid Materials as UV Protection Systems for Potential Cosmetic Applications

2015 ◽  
Vol 16 (12) ◽  
pp. 1070-1077
Author(s):  
Carla Villa ◽  
Chiara Lacapra ◽  
Roberto Rosa ◽  
Paolo Veronesi ◽  
Cristina Leonelli
Keyword(s):  
Hybrid Materials ◽  
Uv Protection ◽  
Inorganic Hybrid ◽  
Protection Systems

Reactions in Activated Peroxide Systems and their Influences on Bleaching Performance

2020 ◽  
Vol 17 ◽  
Author(s):  
Xiaoyan Wang ◽  
Jinmei Du ◽  
Changhai Xu
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Energy Efficiency ◽  
Textile Industry ◽  
High Energy ◽  
Side Reactions ◽  
Competitive Reactions ◽  
High Energy Efficiency ◽  
Hydrolysis Of ◽  
Bleach Activators

Abstract:: Activated peroxide systems are formed by adding so-called bleach activators to aqueous solution of hydrogen peroxide, developed in the seventies of the last century for use in domestic laundry for their high energy efficiency and introduced at the beginning of the 21st century to the textile industry as an approach toward overcoming the extensive energy consumption in bleaching. In activated peroxide systems, bleach activators undergo perhydrolysis to generate more kinetically active peracids that enable bleaching under milder conditions while hydrolysis of bleach activators and decomposition of peracids may occur as side reactions to weaken the bleaching efficiency. This mini-review aims to summarize these competitive reactions in activated peroxide systems and their influence on bleaching performance.

Heterogeneous Fenton Catalytic Removal of Organic Pollutant in Aqueous Solution by using Coal Gangue as a Catalyst

2019 ◽  
Vol 12 (4) ◽  
pp. 312-325
Author(s):  
Jiwei Zhang ◽  
Jingjing Xu ◽  
Shuaixia Liu ◽  
Baoxiang Gu ◽  
Feng Chen ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Hydroxyl Radical ◽  
Removal Rate ◽  
Organic Pollutant ◽  
Coal Gangue ◽  
Ion Leakage ◽  
Heterogeneous Fenton ◽  
Solution Ph ◽  
X Ray

Background: Coal gangue was used as a catalyst in heterogeneous Fenton process for the degradation of azo dye and phenol. The influencing factors, such as solution pH gangue concentration and hydrogen peroxide dosage were investigated, and the reaction mechanism between coal gangue and hydrogen peroxide was also discussed. Methods: Experimental results showed that coal gangue has the ability to activate hydrogen peroxide to degrade environmental pollutants in aqueous solution. Under optimal conditions, after 60 minutes of treatment, more than 90.57% of reactive red dye was removed, and the removal efficiency of Chemical Oxygen Demand (COD) up to 72.83%. Results: Both hydroxyl radical and superoxide radical anion participated in the degradation of organic pollutant but hydroxyl radical predominated. Stability tests for coal gangue were also carried out via the continuous degradation experiment and ion leakage analysis. After five times continuous degradation, dye removal rate decreased slightly and the leached Fe was still at very low level (2.24-3.02 mg L-1). The results of Scanning Electron Microscope (SEM), energy dispersive X-Ray Spectrometer (EDS) and X-Ray Powder Diffraction (XRD) indicated that coal gangue catalyst is stable after five times continuous reuse. Conclusion: The progress in this research suggested that coal gangue is a potential nature catalyst for the efficient degradation of organic pollutant in water and wastewater via the Fenton reaction.

Decomposition of hydrogen peroxide on a two-component NiO-CdO catalyst and the effect of ionizing radiation on its catalytic properties

1979 ◽  
Vol 44 (4) ◽  
pp. 1015-1022 ◽  
Author(s):  
Viliam Múčka
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Catalytic Activity ◽  
Nickel Oxide ◽  
Catalytic Properties ◽  
Cadmium Oxide ◽  
Chemisorb Oxygen ◽  
Composition Region ◽  
Chemisorbed Oxygen ◽  
Two Component

The catalytic properties of two-component catalyst nickel oxide-cadmium oxide with the proportions of the components covering the whole composition region 0-100% were examined by studying the decomposition of hydrogen peroxide in aqueous solution on it. In the range 0-25 mol.% CdO, cadmium oxide is found to affect infavourably the ability of nickel oxide to chemisorb oxygen. The amount of the chemisorbed oxygen increases several times on gamma irradiation of the samples. The effect of cadmium oxide on the catalytic activity of the system shows up in fresh samples only indirectly via the changed amount of the oxygen chemisorbed. In older samples the initial catalytic activity of the system is changed, which can be explained based on the concept of bivalent catalytic centres in terms of the co-action of the catalytic centres of the two oxides, which are in equilibrium. The irradiation of the system under study speeds up the processes leading to the establishing of this equilibrium which is thermally very stable, and results in a substantial increase of the catalytic activity of the samples investigated.

Oxidation of ethylenediphosphinetetraacetate anions

1983 ◽  
Vol 48 (9) ◽  
pp. 2604-2608
Author(s):  
Jana Podlahová ◽  
Jaroslav Podlaha
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Electronic Structure ◽  
Acid Solutions ◽  
Tetraacetic Acid ◽  
Single Product ◽  
Weakly Acid ◽  
Inhibiting Effect ◽  
Oxidation By Molecular Oxygen ◽  
Protonated Forms

The oxidation of the ethylenediphosphinetetraacetate anion and its protonated forms by iodine, periodate, hydrogen peroxide, and oxygen has been studied in aqueous solution. The oxidation by the first three reagents is fast and yields a single product, bis(phosphine oxide), which has been isolated and characterized as ethylenebis(phosphinyl)tetraacetic acid. The oxidation by molecular oxygen proceeds considerably more slowly; in weakly acid solutions its rate is determined by the properties of the oxygen rather than by the electronic structure of the various protonated substrate species. The inhibiting effect of the phosphonium structures takes place only in strongly acid solutions.

Sign in / Sign up

Export Citation Format

Share Document