scholarly journals Dissolution Advantage of Nitazoxanide Cocrystals in the Presence of Cellulosic Polymers

Pharmaceutics ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 23 ◽  
Author(s):  
Reynaldo Salas-Zúñiga ◽  
Christian Rodríguez-Ruiz ◽  
Herbert Höpfl ◽  
Hugo Morales-Rojas ◽  
Obdulia Sánchez-Guadarrama ◽  
...  
Keyword(s):  
Hydroxypropyl Methylcellulose ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Solid Dosage ◽  
Dissolution Studies ◽  
Key Factor ◽  
Pharmaceutical Powder ◽  
Poorly Soluble ◽  
Fast Dissolution ◽  
Cellulosic Polymer

The effect of hydroxypropyl methylcellulose (HPMC) and methylcellulose (Methocel® 60 HG) on the dissolution behavior of two cocrystals derived from nitazoxanide (NTZ), viz., nitazoxanide-glutaric acid (NTZ-GLU, 1:1) and nitazoxanide-succinic acid (NTZ-SUC, 2:1), was explored. Powder dissolution experiments under non-sink conditions showed similar dissolution profiles for the cocrystals and pure NTZ. However, pre-dissolved cellulosic polymer in the phosphate dissolution medium (pH 7.5) modified the dissolution profile of NTZ when starting from the cocrystals, achieving transient drug supersaturation. Subsequent dissolution studies under sink conditions of polymer-based pharmaceutical powder formulations with NTZ-SUC cocrystals gave a significant improvement of the apparent solubility of NTZ when compared with analogous formulations of pure NTZ and the physical mixture of NTZ and SUC. Scanning electron microscopy and powder X-ray diffraction analysis of samples recovered after the powder dissolution studies showed that the cocrystals undergo fast dissolution, drug supersaturation and precipitation both in the absence and presence of polymer, suggesting that the solubilization enhancement is due to polymer-induced delay of nucleation and crystal growth of the less soluble NTZ form. The study demonstrates that the incorporation of an appropriate excipient in adequate concentration can be a key factor for inducing and maintaining the solubilization of poorly soluble drugs starting from co-crystallized solid forms. In such a way, cocrystals can be suitable for the development of solid dosage forms with improved bioavailability and efficacy in the treatment of important parasitic and viral diseases, among others.

Development of an Oral Curcumin Nanocrystal Formulation

2012 ◽  
Vol 3 (4) ◽  
Author(s):  
R. Ravichandran
Keyword(s):  
The Body ◽  
Dissolution Behavior ◽  
Poorly Soluble Drugs ◽  
Solid Dosage Forms ◽  
Bioavailability Enhancement ◽  
Solid Dosage ◽  
Rapid Dissolution ◽  
Poorly Soluble ◽  
Drug Nanocrystal ◽  
Spray Dried

During the last ten years, the formulation of drugs as nanocrystals has rapidly evolved into a mature drug delivery strategy, with currently five products on the market. The major characteristic of these systems is the rapid dissolution velocity, enabling bioavailability enhancement after oral administration. This study describes the preparation of a solid dosage capsule form of spray-dried curcumin nanocrystal and compares its dissolution behavior with market capsule in different media. The aim was to obtain a stable nanocrystal loaded drug capsule with an increased drug saturation solubility and dissolution velocity. The solubility and dissolution experiments were performed to verify the obvious improvement of the dissolution behavior compared with commercial product. Improved dissolution behavior in drug nanocrystal-loaded solid dosage forms should lead to better bioavailability of poorly soluble drugs in the body.

scholarly journals Enhancement of Aqueous Solubility and Dissolution of Celecoxib through Phosphatidylcholine-Based Dispersion Systems Solidified with Adsorbent Carriers

Pharmaceutics ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 1 ◽  
Author(s):  
Kanghee Jo ◽  
Jae Min Cho ◽  
Hyunjoo Lee ◽  
Eun Kyung Kim ◽  
Hong Chul Kim ◽  
...  
Keyword(s):  
Aqueous Solubility ◽  
Drug Dissolution ◽  
Dissolution Behavior ◽  
X Ray Diffraction ◽  
Hydrophobic Property ◽  
Scanning Calorimetry ◽  
Solid Dosage ◽  
Poorly Soluble ◽  
Highly Hydrophobic ◽  
Hydrophilic Materials

This study aimed to design phosphatidylcholine (PC)-based solid dispersion (SD) systems for enhancing the apparent aqueous solubility and dissolution of celecoxib (CLC), a selective cyclooxygenase-2 inhibitor with a highly hydrophobic property. Although PC-based dispersion formulations considerably increased solubilities of CLC, the lipidic texture of PC was not appropriate as a solid dosage form for oral administration of CLC. To mask the lipidic texture of PC-based matrices, Neusilin® US2, an adsorbent material with a porous structure and large surface area widely used in the pharmaceutical industry, was employed and thereby fully powderized PC-based dispersion formulations could be fabricated. However, PC matrices containing CLC strongly adsorbed to the pores of Neusilin® US2 was not able to be rapidly released. To address this problem, different hydrophilic materials were examined to promote the release of the CLC-dispersed PC matrices from Neusilin® US2. Among tested hydrophilic materials, croscarmellose sodium was the most suitable to facilitate fast drug dissolution from Neusilin® US2 particles, showing significantly enhanced apparent aqueous solubility and dissolution behavior of CLC. Through differential scanning calorimetry, X-ray diffraction, and Fourier transform infrared spectroscopy (FT-IR) analysis, a considerably reduced crystallinity of CLC dispersed in the PC-based dispersion formulations was demonstrated. The PC-based SD formulations developed in this study would be useful for improving the oral bioavailability of poorly soluble drugs such as CLC.

scholarly journals The Effect of Crospovidone on the Dissolution Profile of Amlodipine Besylate from Fast Orally Dissolving Film

2019 ◽  
Vol 7 (22) ◽  
pp. 3811-3815
Author(s):  
Sumaiyah Sumaiyah ◽  
Julia Mentari ◽  
Suryanto Suryanto
Keyword(s):  
Mentally Ill ◽  
Hydroxypropyl Methylcellulose ◽  
Dissolution Profile ◽  
Amlodipine Besylate ◽  
Solid Dosage Forms ◽  
Drug Induced ◽  
Disintegration Time ◽  
Solid Dosage ◽  
Rapid Dissolution ◽  
Agent Characteristics

BACKGROUND: Fast Orally Dissolving Film preparation can be used for patients with problems in ingesting solid dosage forms, such as mentally ill, elderly, geriatric and patients who are reducing fluid intake or nausea. AIM: This study aimed to formulate and evaluate the rapid dissolution of amlodipine besylate. METHODS: Amlodipine besylate film was prepared by solvent casting method by using hydroxypropyl methylcellulose (HPMC) as film formers, crospovidone as superdisintegrant with Varian concentration F1 (2%), F2 (4%), F3 (6%) and F4 (8%), PEG 400 as plasticizer, sucralose and sorbitol as sweetener, citric acid as saliva stimulation, and grape essence as flavoring and coloring agent. Characteristics of films include organoleptic, weight uniformity, film thickness, surface pH, swelling, uniformity of content, time of disintegration, and dissolution. RESULTS: All formulated films produced a good film, smooth, transparent and uniform physical properties. F2 with polymer HPMC and the 4% concentration of crospovidone was the best formula with 31.50 seconds of disintegration time, the index expanding at the 15 second by 242.29% and the cumulative percent of the drug at 80 seconds by 98.08%. CONCLUSION: Amlodipine besylate can be formulated into fast orally dissolving film preparations using HPMC and crospovidone polymers so that they may be considered for use in the treatment of hypertension for patients with drug-induced problems in tablet or capsule form.

Formulation and Evaluation of Nelfinavir Extended Release Trilayer Matrix Tablets by Design of Experiment

2018 ◽  
Vol 11 (5) ◽  
pp. 4259-4268
Author(s):  
Nirmala Rangu ◽  
Gande Suresh
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Magnesium Stearate ◽  
Zero Order ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Dissolution Profile ◽  
Release Formulation

The present study was aimed to develop once-daily controlled release trilayer matrix tablets of nelfinavir to achieve zero-order drug release for sustained plasma concentration. Nelfinavir trilayer matrix tablets were prepared by direct compression method and consisted of middle active layer with different grades of hydroxypropyl methylcellulose (HPMC), PVP (Polyvinyl Pyrrolidine) K-30 and MCC (Micro Crystalline Cellulose). Barrier layers were prepared with Polyox WSR-303, Xanthan gum, microcrystalline cellulose and magnesium stearate. Based on the evaluation parameters, drug dissolution profile and release drug kinetics DF8 were found to be optimized formulation. The developed drug delivery system provided prolonged drug release rates over a period of 24 h. The release profile of the optimized formulation (DF8) was described by the zero-order and best fitted to Higuchi model. FT-IR studies confirmed that there were no chemical interactions between drug and excipients used in the formulation. These results indicate that the approach used could lead to a successful development of a controlled release formulation of nelfinavir in the management of AIDS.

scholarly journals Enhancement of solubility and dissolution rate of poorly water soluble raloxifene using microwave induced fusion method

2013 ◽  
Vol 49 (3) ◽  
pp. 571-578 ◽  
Author(s):  
Payal Hasmukhlal Patil ◽  
Veena Sailendra Belgamwar ◽  
Pratibha Ramratan Patil ◽  
Sanjay Javerilal Surana
Keyword(s):  
Dissolution Rate ◽  
Hydroxypropyl Methylcellulose ◽  
Microwave Treatment ◽  
Water Soluble ◽  
Fusion Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Wetting Properties ◽  
Poorly Soluble ◽  
Poorly Water Soluble

The objective of the present work was to enhance the solubility and dissolution rate of the drug raloxifene HCl (RLX), which is poorly soluble in water. The solubility of RLX was observed to increase with increasing concentration of hydroxypropyl methylcellulose (HPMC E5 LV). The optimized ratio for preparing a solid dispersion (SD) of RLX with HPMC E5 LV using the microwave-induced fusion method was 1:5 w/w. Microwave energy was used to prepare SDs. HPMC E5 LV was used as a hydrophilic carrier to enhance the solubility and dissolution rate of RLX. After microwave treatment, the drug and hydrophilic polymer are fused together, and the drug is converted from the crystalline form into an amorphous form. This was confirmed through scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies. These results suggested that the microwave method is a simple and efficient method of preparing SDs. The solubility and dissolution rate of the SDs were increased significantly compared with pure RLX due to the surfactant and wetting properties of HPMC E5 LV and the formation of molecular dispersions of the drug in HPMC E5 LV. It was concluded that the solubility and dissolution rate of RLX are increased significantly when an SD of the drug is prepared using the microwave-induced fusion method.

scholarly journals In Silico Prediction of Plasma Concentrations of Fluconazole Capsules with Different Dissolution Profiles and Bioequivalence Study Using Population Simulation

Pharmaceutics ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 215 ◽  
Author(s):  
Marcelo Dutra Duque ◽  
Daniela Amaral Silva ◽  
Michele Georges Issa ◽  
Valentina Porta ◽  
Raimar Löbenberg ◽  
...  
Keyword(s):  
Reference Product ◽  
Plasma Concentrations ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Time Data ◽  
Simulation Results ◽  
Population Simulation

A biowaiver is accepted by the Brazilian Health Surveillance Agency (ANVISA) for immediate-release solid oral products containing Biopharmaceutics Classification System (BCS) class I drugs showing rapid drug dissolution. This study aimed to simulate plasma concentrations of fluconazole capsules with different dissolution profiles and run population simulation to evaluate their bioequivalence. The dissolution profiles of two batches of the reference product Zoltec® 150 mg capsules, A1 and A2, and two batches of other products (B1 and B2; C1 and C2), as well as plasma concentration–time data of the reference product from the literature, were used for the simulations. Although products C1 and C2 had drug dissolutions < 85% in 30 min at 0.1 M HCl, simulation results demonstrated that these products would show the same in vivo performance as products A1, A2, B1, and B2. Population simulation results of the ln-transformed 90% confidence interval for the ratio of Cmax and AUC0–t values for all products were within the 80–125% interval, showing to be bioequivalent. Thus, even though the in vitro dissolution behavior of products C1 and C2 was not equivalent to a rapid dissolution profile, the computer simulations proved to be an important tool to show the possibility of bioequivalence for these products.

scholarly journals FORMULATION AND EVALUATION OF SIMVASTATIN GASTRORETENTIVE DRUG DELIVERY SYSTEM

2017 ◽  
Vol 9 (3) ◽  
pp. 55
Author(s):  
Manjunath P. N. ◽  
Satish C. S. ◽  
Vasanti S. ◽  
Preetham A. C. ◽  
Naidu Ras
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Release Rate ◽  
Drug Transport ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Dissolution ◽  
Dissolution Studies ◽  
Viscosity Grade

Objective: The aim of this study was to formulate and evaluate gastro retentive drug delivery system (GRRDS) using an effervescent approach for simvastatin.Methods: Floating tablets were prepared using directly compressible polymers hydroxypropyl methylcellulose (HPMC) K100M, HPMC K4M and carboxymethylcellulose sodium (NaCMC). The prepared tablets were subjected to pre-formulation studies like Compressibility index, Hausner ratio and post compression parameters like buoyancy/floating test and In vitro dissolution study.Results: Drug-excipient compatibility studies performed with the help of FTIR instrument indicated that there were no interactions. The DSC thermogram of the formulations revealed that crystalline form of simvastatin existed in the formulation which was confirmed by X-ray powder diffraction. Dissolution studies indicated that there was a decrease in the drug release with an increase in the polymer viscosity. The tablets prepared with low-viscosity grade HPMC K4M exhibited short Buoyancy Lag Time and floated for a longer duration as compared with formulations containing high viscosity grade HPMC K100M. The ‘n’ value for dissolution studies for all the formulations was found to be in the range of 0.647 to 0.975 indicating non-Fickian or anomalous drug transport. Conclusion: The drug release rate and floating duration of tablets depended on the nature of the polymer and other added excipients. The release rate of the drug can be optimized by using different ratios of polymers and other excipients. The formulation F8 achieved the optimized batch and complied with all the properties of the tablets.

scholarly journals Fast, Spectroscopy-Based Prediction of In Vitro Dissolution Profile of Extended Release Tablets Using Artificial Neural Networks

Pharmaceutics ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 400 ◽  
Author(s):  
Galata ◽  
Farkas ◽  
Könyves ◽  
Mészáros ◽  
Szabó ◽  
...  
Keyword(s):  
Raman Spectra ◽  
Extended Release ◽  
Near Infrared ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Ann Model ◽  
Compression Force ◽  
Ann Models ◽  
Artificial Neural

The pharmaceutical industry has never seen such a vast development in process analytical methods as in the last decade. The application of near-infrared (NIR) and Raman spectroscopy in monitoring production lines has also become widespread. This work aims to utilize the large amount of information collected by these methods by building an artificial neural network (ANN) model that can predict the dissolution profile of the scanned tablets. An extended release formulation containing drotaverine (DR) as a model drug was developed and tablets were produced with 37 different settings, with the variables being the DR content, the hydroxypropyl methylcellulose (HPMC) content and compression force. NIR and Raman spectra of the tablets were recorded in both the transmission and reflection method. The spectra were used to build a partial least squares prediction model for the DR and HPMC content. The ANN model used these predicted values, along with the measured compression force, as input data. It was found that models based on both NIR and Raman spectra were capable of predicting the dissolution profile of the test tablets within the acceptance limit of the f2 difference factor. The performance of these ANN models was compared to PLS models using the same data as input, and the prediction of the ANN models was found to be more accurate. The proposed method accomplishes the prediction of the dissolution profile of extended release tablets using either NIR or Raman spectra.

scholarly journals A Comparative Study of the Use of Mesoporous Carbon and Mesoporous Silica as Drug Carriers for Oral Delivery of the Water-Insoluble Drug Carvedilol

Molecules ◽  
2019 ◽  
Vol 24 (9) ◽  
pp. 1770 ◽  
Author(s):  
Cuiyan Han ◽  
Haitao Huang ◽  
Yan Dong ◽  
Xiaoyu Sui ◽  
Baiyu Jian ◽  
...  
Keyword(s):  
Mesoporous Silica ◽  
Oral Delivery ◽  
Mesoporous Carbon ◽  
Mesoporous Silica Nanoparticles ◽  
Drug Loading ◽  
Drug Dissolution ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Adsorption Effect ◽  
Insoluble Drugs

Mesoporous carriers have been extensively applied to improve the dissolution velocity and bioavailability of insoluble drugs. The goal of this work was to compare the drug-loading efficiency (LE) and drug-dissolution properties of mesoporous silica nanoparticles (MSN) and mesoporous carbon nanoparticles (MCN) as drug vectors oral delivery of water-insoluble drugs. For this purpose, MSN and MCN with similar particle size, surface area, and mesoporous diameter were prepared to precisely evaluate the effects of different textures on the drug-loading and dissolution behavior of insoluble drugs. Carvedilol (CAR), a Bio-pharmaceutic Classification System (BCS) class II drug, was loaded in the MSN and MCN by the solvent adsorption method and solvent evaporation method with different carrier–drug ratios. The carboxylated MCN (MCN–COOH) had a higher LE for CAR than MSN for both the two loading methods due to the strong adsorption effect and π–π stacking force with CAR. In vitro drug dissolution study showed that both MSN and MCN-COOH could improve the dissolution rate of CAR compared with the micronized CAR. In comparison to MSN, MCN-COOH displayed a slightly slower dissolution profile, which may be ascribed to the strong interaction between MCN-COOH and CAR. Observation of cell cytotoxicity and gastrointestinal mucosa irritation demonstrated the good biocompatibility of both MSN and MCN–COOH. The present study encourages further research of different carriers to determine their potential application in oral administration.

Sign in / Sign up

Export Citation Format

Share Document