scholarly journals Preparation of PolyHIPE Scaffolds for 3D Cell Culture and the Application in Cytotoxicity Evaluation of Cigarette Smoke

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 959
Author(s):  
Peijian Sun ◽  
Song Yang ◽  
Xuehui Sun ◽  
Yipeng Wang ◽  
Yunzhen Jia ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cigarette Smoke ◽  
Evaluation System ◽  
A549 Cells ◽  
3D Cell Culture ◽  
Continuous Phase ◽  
High Porosity ◽  
3D Scaffold ◽  
Promote Cell Proliferation ◽  
2D System

Polystyrene-based polyHIPE (polymerized high internal phase emulsion) materials were prepared by the copolymerization of styrene and divinylbenzene in the continuous phase of a HIPE. The resultant polyHIPE materials were found to have an open-cellular morphology and high porosity, and the polyHIPE structure could be well adjusted by varying the water/oil (W/O) ratio and the amount of emulsifier in the HIPE. Cell culture results showed that the resultant polyHIPE materials, which exhibited larger voids and connected windows as well as high porosity, could promote cell proliferation on the 3D scaffold. A 3D cell cytotoxicity evaluation system was constructed with the polystyrene-based polyHIPE materials as scaffolds and the cigarette smoke cytotoxicity was evaluated. Results showed that the smoke cytotoxicity against A549 cells is much lower in the 3D cell platform compared to the traditional 2D system, showing the great potential of the polyHIPE scaffolds for 3D cell culture and the cytotoxic evaluation of cigarette smoke.

scholarly journals The Combined Effects of Co-Culture and Substrate Mechanics on 3D Tumor Spheroid Formation within Microgels Prepared via Flow-Focusing Microfluidic Fabrication

Pharmaceutics ◽  
2018 ◽  
Vol 10 (4) ◽  
pp. 229 ◽  
Author(s):  
Dongjin Lee ◽  
Chaenyung Cha
Keyword(s):  
Mechanical Properties ◽  
Cell Culture ◽  
Microfluidic Device ◽  
3D Cell Culture ◽  
Breast Adenocarcinoma ◽  
Adherent Cell ◽  
Flow Focusing ◽  
Spheroid Formation ◽  
3D Scaffold ◽  
Tumor Spheroids

Tumor spheroids are considered a valuable three dimensional (3D) tissue model to study various aspects of tumor physiology for biomedical applications such as tissue engineering and drug screening as well as basic scientific endeavors, as several cell types can efficiently form spheroids by themselves in both suspension and adherent cell cultures. However, it is more desirable to utilize a 3D scaffold with tunable properties to create more physiologically relevant tumor spheroids as well as optimize their formation. In this study, bioactive spherical microgels supporting 3D cell culture are fabricated by a flow-focusing microfluidic device. Uniform-sized aqueous droplets of gel precursor solution dispersed with cells generated by the microfluidic device are photocrosslinked to fabricate cell-laden microgels. Their mechanical properties are controlled by the concentration of gel-forming polymer. Using breast adenocarcinoma cells, MCF-7, the effect of mechanical properties of microgels on their proliferation and the eventual spheroid formation was explored. Furthermore, the tumor cells are co-cultured with macrophages of fibroblasts, which are known to play a prominent role in tumor physiology, within the microgels to explore their role in spheroid formation. Taken together, the results from this study provide the design strategy for creating tumor spheroids utilizing mechanically-tunable microgels as 3D cell culture platform.

scholarly journals Towards a scaled-up T cell-mediated cytotoxicity assay in 3D cell culture using microscopy

2019 ◽  
Author(s):  
Elinor Gottschalk ◽  
Eric Czech ◽  
Bulent Arman Aksoy ◽  
Pinar Aksoy ◽  
Jeff Hammerbacher
Keyword(s):  
Cell Culture ◽  
T Cells ◽  
T Cell ◽  
Cytotoxic T Cells ◽  
Three Dimensional ◽  
Collagen Gel ◽  
3D Cell Culture ◽  
3D Scaffold ◽  
Tumor Spheroids ◽  
Drug Induced

AbstractThree-dimensional (3D) cell culture systems with tumor spheroids are being adopted for research on the antitumor activity of drug treatments and cytotoxic T cells. Analysis of the cytotoxic effect on 3D tumor cultures within a 3D scaffold, such as collagen, is challenging. Image-based approaches often use confocal microscopy, which greatly limits the sample size of tumor spheroids that can be assayed. We explored a system where tumor spheroids growing in a collagen gel within a microfluidics chip can be treated with drugs or co-cultured with T cells. We attempted to adapt the system to measure the death of cells in the tumor spheroids directly in the microfluidics chip via automated widefield fluorescence microscopy. We were able to successfully measure drug-induced cytotoxicity in tumor spheroids, but had difficulties extending the system to measure T cell-mediated tumor killing.Abstract Figure

scholarly journals Polysaccharide-based hydrogels with tunable composition as 3D cell culture systems

2018 ◽  
Vol 41 (4) ◽  
pp. 213-222
Author(s):  
Roberta Gentilini ◽  
Fabiola Munarin ◽  
Nora Bloise ◽  
Eleonora Secchi ◽  
Livia Visai ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cell Viability ◽  
Viscoelastic Properties ◽  
3D Cell Culture ◽  
Promote Cell Proliferation ◽  
Culture Systems ◽  
Weight Variation ◽  
Cell Culture Systems ◽  
Initial Ph

Background: To date, cell cultures have been created either on 2-dimensional (2D) polystyrene surfaces or in 3-dimensional (3D) systems, which do not offer a controlled chemical composition, and which lack the soft environment encountered in vivo and the chemical stimuli that promote cell proliferation and allow complex cellular behavior. In this study, pectin-based hydrogels were developed and are proposed as versatile cell culture systems. Methods: Pectin-based hydrogels were produced by internally crosslinking pectin with calcium carbonate at different initial pH, aiming to control crosslinking kinetics and degree. Additionally, glucose and glutamine were added as additives, and their effects on the viscoelastic properties of the hydrogels and on cell viability were investigated. Results: Pectin hydrogels showed in high cell viability and shear-thinning behavior. Independently of hydrogel composition, an initial swelling was observed, followed by a low percentage of weight variation and a steady-state stage. The addition of glucose and glutamine to pectin-based hydrogels rendered higher cell viability up to 90%-98% after 1 hour of incubation, and these hydrogels were maintained for up to 7 days of culture, yet no effect on viscoelastic properties was detected. Conclusions: Pectin-based hydrogels that offer tunable composition were developed successfully. They are envisioned as synthetic extracellular matrix (ECM) either to study complex cellular behaviors or to be applied as tissue engineering substitutes.

scholarly journals Influence of electrohydrodynamic jetting parameters on the morphology of PCL scaffolds

2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Hang Liu ◽  
Sanjairaj Vijayavenkataraman ◽  
Dandan Wang ◽  
Linzhi Jing ◽  
Jie Sun ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cell Attachment ◽  
3D Cell Culture ◽  
Solution Concentration ◽  
Processing Parameters ◽  
Optical Microscope ◽  
3D Scaffold ◽  
Sem Images ◽  
Scaffold Fabrication ◽  
Fibre Characteristics

 One of the important constituents in tissue engineering is scaffold, which provides structural support and suitable microenvironment for the cell attachment, growth and proliferation. To fabricate micro/nano structures for soft tissue repair and three-dimensional (3D) cell culture, the key is to improve fibre-based scaffold fabrication. Electrohydrodynamic (EHD) jetting is capable of producing and orientating submicron fibres for 3D scaffold fabrication. In this work, an EHD-jetting system was developed to explore the relationship between vital processing parameters and fibre characteristics. In this study, polycaprolactone (PCL) solution prepared by dissolving PCL pellets in acetic acid was used to fabricate the scaffolds. The influence of voltage, motorized stage speed, solution feed rate, and solution concentration on fibre characteristics and scaffold pattern were studied. Morphology of the EHD-jetted PCL fibres and scaffolds were analysed using optical microscope images and scanning electron microscope (SEM) images. Multi-layer scaffolds with the varied coiled pattern were fabricated and analysed. Cell attachment and proliferation have to be investigated in the future by further cell culture studies on these multi-layer coiled scaffolds.

scholarly journals Trinity of Three-Dimensional (3D) Scaffold, Vibration, and 3D Printing on Cell Culture Application: A Systematic Review and Indicating Future Direction

2018 ◽  
Vol 5 (3) ◽  
pp. 57 ◽  
Author(s):  
Haobo Yuan ◽  
Ke Xing ◽  
Hung-Yao Hsu
Keyword(s):  
Cell Culture ◽  
3D Printing ◽  
Rapid Development ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
3D Scaffold ◽  
Cell Scaffold ◽  
3D Environments ◽  
Culturing Conditions ◽  
Future Direction

Cell culture and cell scaffold engineering have previously developed in two directions. First can be ‘static into dynamic’, with proven effects that dynamic cultures have benefits over static ones. Researches in this direction have used several mechanical means, like external vibrators or shakers, to approximate the dynamic environments in real tissue, though such approaches could only partly address the issue. Second, can be ‘2D into 3D’, that is, artificially created three-dimensional (3D) passive (also called ‘static’) scaffolds have been utilized for 3D cell culture, helping external culturing conditions mimic real tissue 3D environments in a better way as compared with traditional two-dimensional (2D) culturing. In terms of the fabrication of 3D scaffolds, 3D printing (3DP) has witnessed its high popularity in recent years with ascending applicability, and this tendency might continue to grow along with the rapid development in scaffold engineering. In this review, we first introduce cell culturing, then focus 3D cell culture scaffold, vibration stimulation for dynamic culture, and 3DP technologies fabricating 3D scaffold. Potential interconnection of these realms will be analyzed, as well as the limitations of current 3D scaffold and vibration mechanisms. In the recommendation part, further discussion on future scaffold engineering regarding 3D vibratory scaffold will be addressed, indicating 3DP as a positive bridging technology for future scaffold with integrated and localized vibratory functions.

Flow Analysis of a Porous Polymer-Based Three-Dimensional Cell Culture Device for Drug Screening

2018 ◽  
Author(s):  
Liang Ma ◽  
Lei Gao ◽  
Yichen Luo ◽  
Huayong Yang ◽  
Bin Zhang ◽  
...  
Keyword(s):  
Cell Culture ◽  
Shear Stress ◽  
Three Dimensional ◽  
Flow Simulation ◽  
3D Cell Culture ◽  
Porous Polymer ◽  
Poly Lactic Acid ◽  
Porous Scaffolds ◽  
3D Scaffold

A porous polymer-based three-dimensional (3D) cell culture device has been developed as an in vitro tissue model system for the cytotoxicity of anticancer drug test. The device had two chambers connected in tandem, each loaded with a 3D scaffold made of highly biocompatible poly (lactic acid) (PLA). Hepatoma cells (HepG2) and glioblastoma multiforme (GBM) cancer cells were cultured in the two separate porous scaffolds. A peristaltic pump was adopted to realize a perfusion cell culture. In this study, we focus on cell viability inside the 3D porous scaffolds under flow-induced shear stress effects. A flow simulation was conducted to predict the shear stress based on a realistic representation of the porous structure. The simulation results were correlated to the cell variability measurements at different flow rates. It is shown that the modeling approach presented in this paper can be useful for shear stress predication inside porous scaffolds and the computational fluid dynamics model can be an effective way to optimize the operation parameters of perfused 3D cell culture devices.

A ready-to-use, versatile, multiplex-able three-dimensional scaffold-based immunoassay chip for high throughput hepatotoxicity evaluation

Lab on a Chip ◽  
2015 ◽  
Vol 15 (12) ◽  
pp. 2634-2646 ◽  
Author(s):  
Xiaojun Yan ◽  
Jingyu Wang ◽  
Lu Zhu ◽  
Jonathan Joseph Lowrey ◽  
Yuanyuan Zhang ◽  
...  
Keyword(s):  
Cell Culture ◽  
High Throughput ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
3D Scaffold

A ready-to-use 3D scaffold-based immunoChip combined with a 3D cell culture chip for high throughput drug hepatotoxicity evaluation.

scholarly journals Applications of Biomaterials in 3D Cell Culture and Contributions of 3D Cell Culture to Drug Development and Basic Biomedical Research

2021 ◽  
Vol 22 (5) ◽  
pp. 2491
Author(s):  
Yujin Park ◽  
Kang Moo Huh ◽  
Sun-Woong Kang
Keyword(s):  
Cell Culture ◽  
Three Dimensional ◽  
3D Culture ◽  
3D Cell Culture ◽  
Accurate Method ◽  
New Drugs ◽  
Toxicity Screening ◽  
Cellular Functions ◽  
Toxicity Of Drugs ◽  
External Stimuli

The process of evaluating the efficacy and toxicity of drugs is important in the production of new drugs to treat diseases. Testing in humans is the most accurate method, but there are technical and ethical limitations. To overcome these limitations, various models have been developed in which responses to various external stimuli can be observed to help guide future trials. In particular, three-dimensional (3D) cell culture has a great advantage in simulating the physical and biological functions of tissues in the human body. This article reviews the biomaterials currently used to improve cellular functions in 3D culture and the contributions of 3D culture to cancer research, stem cell culture and drug and toxicity screening.

Sign in / Sign up

Export Citation Format

Share Document