scholarly journals Bio-Based Epoxy Shape-Memory Thermosets from Triglycidyl Phloroglucinol

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 542 ◽  
Author(s):  
David Santiago ◽  
Dailyn Guzmán ◽  
Francesc Ferrando ◽  
Àngels Serra ◽  
Silvia De la Flor
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Memory Performance ◽  
Crosslinking Agent ◽  
Shape Memory Polymers ◽  
Crosslinking Density ◽  
Mechanical Analysis ◽  
Diglycidyl Ether ◽  
Partial Substitution ◽  
Scanning Calorimetry

A series of bio-based epoxy shape-memory thermosetting polymers were synthesized starting from a triglycidyl phloroglucinol (3EPOPh) and trimethylolpropane triglycidyl ether (TPTE) as epoxy monomers and a polyetheramine (JEF) as crosslinking agent. The evolution of the curing process was studied by differential scanning calorimetry (DSC) and the materials obtained were characterized by means of DSC, thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), stress-strain tests, and microindentation. Shape-memory properties were evaluated under free and totally constrained conditions. All results were compared with an industrial epoxy thermoset prepared from standard diglycidyl ether of Bisphenol A (DGEBA). Results revealed that materials prepared from 3EPOPh were more reactive and showed a tighter network with higher crosslinking density and glass transition temperatures than the prepared from DGEBA. The partial substitution of 3EPOPh by TPTE as epoxy comonomer caused an increase in the molecular mobility of the materials but without worsening the thermal stability. The shape-memory polymers (SMPs) prepared from 3EPOPh showed good mechanical properties as well as an excellent shape-memory performance. They showed almost complete shape-recovery and shape-fixation, fast shape-recovery rates, and recovery stress up to 7 MPa. The results obtained in this study allow us to conclude that the triglycidyl phloroglucinol derivative of eugenol is a safe and environmentally friendly alternative to DGEBA for preparing thermosetting shape-memory polymers.

Influence of Radialization Dosage on Shape Memory Effect of Polystyrene Copolymer

2008 ◽  
Vol 47-50 ◽  
pp. 690-693 ◽  
Author(s):  
Da Wei Zhang ◽  
Jin Song Leng ◽  
Yan Ju Liu
Keyword(s):  
Shape Memory ◽  
Shape Memory Effect ◽  
Memory Effect ◽  
Smart Materials ◽  
Shape Recovery ◽  
Memory Performance ◽  
Shape Memory Polymer ◽  
Shape Memory Polymers ◽  
Mechanical Analysis ◽  
Styrene Copolymer

This paper is concerned about the synthesis of shape memory styrene copolymer and the investigation of the influence of radialization dosage on its shape memory effect. As one of novel actuators in smart materials, shape memory polymers (SMPs) have been investigated intensively. Styrene copolymer with proper cross-linking degree can exhibit shape memory effect (SME). In this paper, the influence of radialization on shape memory effect of styrene copolymer was investigated through altering the dosage of radialization. The radialization dosage of styrene copolymer was determined by changed radicalization time. The glass transition temperature (Tg) of styrene copolymerwas measured by Dynamic Mechanical Analysis (DMA). The shape memory performance of styrene copolymer with different radiated dosage was also evaluated. Results indicated that the shape memory polymer (SMP) was synthesized successfully. The Tg increased from 60°C to 65°C followed by increasing the radialization dosage. Moreover, the SMP experienced good SME and the largest reversible strain of the SMP reached as high as 150%. When heating above Tg+30°C (different copolymers performed different Tg), the shape recovery speed of the copolymers increased with increasing the radialization dosage. However, the recovery speed decreased with increasing the radialization dosage at the same temperature of 95°C.

scholarly journals The Effect of POSS Type on the Shape Memory Properties of Epoxy-Based Nanocomposites

Molecules ◽  
2020 ◽  
Vol 25 (18) ◽  
pp. 4203
Author(s):  
Avraham I. Bram ◽  
Irina Gouzman ◽  
Asaf Bolker ◽  
Noam Eliaz ◽  
Ronen Verker
Keyword(s):  
Transition Temperature ◽  
Shape Memory ◽  
Crosslinking Density ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Space Environment ◽  
Scanning Calorimetry ◽  
Space Applications ◽  
Curing Conditions ◽  
Oligomeric Silsesquioxane

Thermally activated shape memory polymers (SMPs) can memorize a temporary shape at low temperature and return to their permanent shape at higher temperature. These materials can be used for light and compact space deployment mechanisms. The control of transition temperature and thermomechanical properties of epoxy-based SMPs can be done using functionalized polyhedral oligomeric silsesquioxane (POSS) additives, which are also known to improve the durability to atomic oxygen in the space environment. In this study, the influence of varying amounts of two types of POSS added to epoxy-based SMPs on the shape memory effect (SME) were studied. The first type contained amine groups, whereas the second type contained epoxide groups. The curing conditions were defined using differential scanning calorimetry and glass transition temperature (Tg) measurements. Thermomechanical and SME properties were characterized using dynamic mechanical analysis. It was found that SMPs containing amine-based POSS show higher Tg, better shape fixity and faster recovery speed, while SMPs containing epoxide-based POSS have higher crosslinking density and show superior thermomechanical properties above Tg. This work demonstrates how the Tg and SME of SMPs can be controlled by the type and amount of POSS in an epoxy-based SMP nanocomposite for future space applications.

Study of a Cu-Al-Mn Shape Memory Alloy Produced by Plasma Melting Followed by Injection Molding

2014 ◽  
Vol 1611 ◽  
pp. 25-30
Author(s):  
Francisco Fernando Roberto Pereira ◽  
Maria Goretti Ferreira Coutinho ◽  
Bruno Moura Miranda ◽  
Carlos José de Araújo
Keyword(s):  
Injection Molding ◽  
Shape Memory ◽  
Shape Recovery ◽  
Permanent Deformation ◽  
Melting Process ◽  
Mechanical Analysis ◽  
Scanning Calorimetry ◽  
Dynamical Mechanical Analysis ◽  
Plasma Melting ◽  
New Applications

ABSTRACTShape Memory Alloys (SMA) are characterized by the capacity to recover a permanent deformation after being heated above a critical temperature called Final Austenite Temperature (Af). The Ni-Ti SMA are the most commercially used, however recent studies showed that the Cu-Al-Mn SMA present significant shape recovery and mechanical properties, showing a strong potential for developing new applications. In this context, the main goal of this work is to manufacture a Cu-Al-Mn SMA through a plasma melting process followed by injection molding of liquid metal and then characterize the samples, using the following techniques: Optical Microscopy (OM), Differential Scanning Calorimetry (DSC), Electrical Resistance as a function of Temperature (ERT) tests, Dynamical Mechanical Analysis (DMA) and Microhardness (MH).

scholarly journals Block Copolymers of Poly(ω-Pentadecalactone) in Segmented Polyurethanes: Novel Biodegradable Shape Memory Polyurethanes

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1928
Author(s):  
Katalin Czifrák ◽  
Csilla Lakatos ◽  
Marcell Árpád Kordován ◽  
Lajos Nagy ◽  
Lajos Daróczi ◽  
...  
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Mechanical Analysis ◽  
Attenuated Total Reflectance ◽  
Dibutyltin Dilaurate ◽  
Scanning Calorimetry ◽  
Dynamical Mechanical Analysis ◽  
Good Shape ◽  
Segmented Polyurethanes ◽  
Shape Fixity

In this report, the synthesis of poly(ω-pentadecalactone) (PPDL) (co)polymers and their incorporation into polyurethanes (PUs) are reported. Optimal conditions for the ring-opening polymerization (ROP) of ω-pentadecalactone (PDL) using dibutyltin dilaurate catalyst were established. For the synthesis of linear and crosslinked PUs, 50 kDa poly(ε-caprolactone) (PCL) and 1,6-hexamethylenediisocyanate (HDI) were used. The obtained polyurethanes were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FTIR), differential scanning calorimetry (DSC), and dynamical mechanical analysis (DMA). The DMA of the selected sample showed a rubbery plateau on the storage modulus versus temperature curve predicting shape memory behavior. Indeed, good shape memory performances were obtained with shape fixity (Rf) and shape recovery (Rr) ratios.

The Two-Stage Curing Method for Shape-Memory Materials

2012 ◽  
Vol 476-478 ◽  
pp. 2227-2230
Author(s):  
He Sun ◽  
Yu Yan Liu ◽  
Hui Feng Tan ◽  
Chang Guo Wang
Keyword(s):  
Shape Memory ◽  
Memory Performance ◽  
Mechanical Analysis ◽  
Scanning Calorimetry ◽  
Two Stage ◽  
Memory Tests ◽  
Second Stage ◽  
Shape Memory Properties ◽  
Shape Memory Materials ◽  
Curing Method

In this paper, a various shape-memory materials had been prepared by two-stage curing method. The purpose of using this approach was to maintain the excellent shape memory properties and low glass transition temperature (Tg) of shape-memory materials after first stage curing, furthermore, improve the Tg and heat resistence effectively after second stage curing. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and fold-deploy shape memory tests were used to characterize the feasibility of two-stage curing, thermodynamics properties and shape memory performance of these polymers. DSC results showed that two different curing stages could be achieved successfully, DMA results suggested that heat resistance of materials had been improved after second curing stage, while the fold-deploy shape memory tests proved that the composites possessed excellent shape memory properties, it could be deformed into different shape and recovered its original shape fully within three minutes.

scholarly journals Analysis of Shape Memory Behavior and Mechanical Properties of Shape Memory Polymer Composites Using Thermal Conductive Fillers

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1107
Author(s):  
Mijeong Kim ◽  
Seongeun Jang ◽  
Sungwoong Choi ◽  
Junghoon Yang ◽  
Jungpil Kim ◽  
...  
Keyword(s):  
Physical Properties ◽  
Shape Memory ◽  
Polymer Composites ◽  
Shape Recovery ◽  
Memory Performance ◽  
Shape Memory Polymer ◽  
Scanning Calorimetry ◽  
Wide Range ◽  
Nanocarbon Materials ◽  
Shape Memory Composite

Shape memory polymers (SMPs) are attracting attention for their use in wearable displays and biomedical materials due to their good biocompatibility and excellent moldability. SMPs also have the advantage of being lightweight with excellent shape recovery due to their low density. However, they have not yet been applied to a wide range of engineering fields because of their inferior physical properties as compared to those of shape memory alloys (SMAs). In this study, we attempt to find optimized shape memory polymer composites. We also investigate the shape memory performance and physical properties according to the filler type and amount of hardener. The shape memory composite was manufactured by adding nanocarbon materials of graphite and non-carbon additives of Cu. The shape-recovery mechanism was compared, according to the type and content of the filler. The shape fixation and recovery properties were analyzed, and the physical properties of the shape recovery composite were obtained through mechanical strength, thermal conductivity and differential scanning calorimetry analysis.

Novel Bismaleimide-Based Shape Memory Polymers: Comparison to Commercial Shape Memory Polymers

2011 ◽  
Author(s):  
Amber J. W. McClung ◽  
Joseph A. Shumaker ◽  
Jeffery W. Baur
Keyword(s):  
Shape Memory ◽  
Memory Performance ◽  
Shape Memory Polymers ◽  
Mechanical Analysis ◽  
Thermomechanical Properties ◽  
Transition Temperatures ◽  
Thermal And Mechanical Properties ◽  
Glass Transition Temperatures ◽  
Tan Δ ◽  
Heat Loads

A series of novel shape memory polymers, synthesized from 4-4-bismaleimidodiphenyl-methane, an extended chain aliphatic diamine, and a bis-isocyanate, have been created and characterized with the aim of providing a family of robust high temperature shape memory polymers with tailorable transition temperatures for use in reconfigurable aerospace structures. In the present study, three of the polymers are chosen for more detailed study of their thermomechanical properties. These materials are compared to commercial resins Veriflex® and Veriflex-E® which are styrene- and epoxy-based proprietary formulations, respectively. The thermal and mechanical properties are determined utilizing thermogravimetric analysis and dynamic mechanical analysis. The temperatures at which 2% weight loss is observed in dry air ranges from 272 to 305 °C for the synthesized polymers, and occurs at 242 and 317 °C for the commercial Veriflex® and Veriflex-E® respectively. The glass transition temperatures, as measured by the peak in the tan(δ) curve, for the synthesized polymers range from 110 to 144 °C which is a higher than the Veriflex® and Veriflex-E® achieve at 84.3 and 100 °C respectively. With operation temperatures of subsonic structural aircraft components often reaching 121 °C (250 °F), the transition temperatures of the bismaleimide-based shape memory polymers are clearly desirable to ensure that shape memory polymers used in aircraft structures will not be prematurely triggered by the existing heat loads. In addition, the shape memory performance of the bismaleimide-based shape memory polymers compares well with the Veriflex® and Veriflex-E® resins.

scholarly journals High-Temperature-Induced Shape Memory Copolyimide

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3222
Author(s):  
Yucheng Zi ◽  
Dongxu Pei ◽  
Jianhua Wang ◽  
Shengli Qi ◽  
Guofeng Tian ◽  
...  
Keyword(s):  
High Temperature ◽  
Shape Memory ◽  
Shape Recovery ◽  
Memory Performance ◽  
Crosslinking Density ◽  
Polyimide Films ◽  
Film Properties ◽  
Chain Entanglement ◽  
Chain Mobility ◽  
The Relationship

A series of polyimide (PI) films with a high-temperature-induced shape memory effect and tunable properties were prepared via the facile random copolymerization of 4,4′-oxydianiline (ODA) with 4,4′-(hexafluoroisopropyl)diphthalic anhydride (6FDA) and 4,4′-oxydiphthalic anhydride (ODPA). The trigger temperature can be controlled from 294 to 326 °C by adjusting the ratio of monomers. The effects of monomer rigidity on the chain mobility, physical properties, and shape memory performance of as-prepared copolyimide were systematically investigated. The introduction of ODPA could enhance the mobility of PI macromolecular chains, which made chain entanglement more likely to occur and increased the physical crosslinking density, thereby improving the PI’s shape recovery up to 97%. Meanwhile, the existence of 6FDA enabled PI films to set quickly at low temperatures with a shape fixation of 98%. The shape memory cycling characteristics of the polyimide films are also studied, and the relationship between the PI chemical structure and the film properties are further discussed.

scholarly journals Principles for Controlling the Shape Recovery and Degradation Behavior of Biodegradable Shape-Memory Polymers in Biomedical Applications

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 757
Author(s):  
Junsang Lee ◽  
Seung-Kyun Kang
Keyword(s):  
Shape Memory ◽  
Shape Recovery ◽  
Memory Performance ◽  
Shape Memory Polymers ◽  
Hydrolytic Activity ◽  
Thermomechanical Properties ◽  
Property A ◽  
High Tunability ◽  
Wide Range ◽  
Permanent Implant

Polymers with the shape memory effect possess tremendous potential for application in diverse fields, including aerospace, textiles, robotics, and biomedicine, because of their mechanical properties (softness and flexibility) and chemical tunability. Biodegradable shape memory polymers (BSMPs) have unique benefits of long-term biocompatibility and formation of zero-waste byproducts as the final degradable products are resorbed or absorbed via metabolism or enzyme digestion processes. In addition to their application toward the prevention of biofilm formation or internal tissue damage caused by permanent implant materials and the subsequent need for secondary surgery, which causes secondary infections and complications, BSMPs have been highlighted for minimally invasive medical applications. The properties of BSMPs, including high tunability, thermomechanical properties, shape memory performance, and degradation rate, can be achieved by controlling the combination and content of the comonomer and crystallinity. In addition, the biodegradable chemistry and kinetics of BSMPs, which can be controlled by combining several biodegradable polymers with different hydrolysis chemistry products, such as anhydrides, esters, and carbonates, strongly affect the hydrolytic activity and erosion property. A wide range of applications including self-expending stents, wound closure, drug release systems, and tissue repair, suggests that the BSMPs can be applied as actuators on the basis of their shape recovery and degradation ability.

Sign in / Sign up

Export Citation Format

Share Document