scholarly journals The Research of Interface Microdomain and Corona-Resistance Characteristics of Micro-Nano-ZnO/LDPE

Polymers ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 563
Author(s):  
Yujia Cheng ◽  
Guang Yu
Keyword(s):  
Corrosion Resistance ◽  
Energy Transfer ◽  
Polymer Composites ◽  
Mass Fraction ◽  
Crystalline Morphology ◽  
Nano Zno ◽  
Inorganic Particles ◽  
Zno Particles ◽  
Resistance Breakdown ◽  
Corona Resistance

In this article, the melting blend was used to prepare the Micro-ZnO/LDPE, Nano-ZnO/LDPE and Micro-Nano-ZnO/LDPE with different inorganic particles contents. The effect of Micro-ZnO and Nano-ZnO particles doping on interface microdomain and corona-resistance breakdown characteristics of LDPE composite could be explored. Based on the energy transfer and heat exchange theory of energetic electrons, the inner electrons energy transfer model of different ZnO/LDPE composites was built. Besides, the microstructure and crystalline morphology of inorganic ZnO-particles and polymer composites were detected by SEM, XRD, FTIR, PLM and DSC test, and the AC breakdown and corona-resistance breakdown characteristics of composites could be explored. From the experimental results, the Nano-ZnO particles after surface modification dispersed uniformly in LDPE matrix, and the nanoparticles agglomeration almost disappeared. The inorganic particles doping acted as the heterogeneous nucleation agent, which improved the crystallization rate and crystallinity of polymer composites effectively. The ZnO particles with different size doping constituted the different interface structure and crystalline morphology, which made different influence on composites macroscopic properties. When the Nano-ZnO particle size was 40nm and the mass fraction was 3%, the breakdown field strength of Nano-ZnO/LPDE was the highest and 15.8% higher than which of pure LDPE. At the same time, the shape parameter β of Micro-Nano-composite was the largest. It illustrated the microparticles doping reduced the probability of nanoparticles agglomeration in matrix. Besides, both Micro-ZnO and Micro-Nano-ZnO particles doping could improve the ability of corona corrosion resistance of LDPE in varying degrees. The corona-resistant breakdown time order of four samples was as follows: LDPE < Micro-ZnO/LDPE < Nano-ZnO/LDPE < Micro-Nano-ZnO/LDPE. When the mass fraction of Micro-ZnO and Nano-ZnO particles was 2% and 3% respectively, the corrosion depth and area of Micro-Nano-ZnO/LDPE was the least, and the ability of corona corrosion resistance was the strongest.

scholarly journals The Research of Conductivity and Dielectric Properties of ZnO/LDPE Composites with Different Particles Size

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4136 ◽  
Author(s):  
Yujia Cheng ◽  
Guang Yu ◽  
Boyang Yu ◽  
Xiaohong Zhang
Keyword(s):  
Dielectric Constant ◽  
Field Strength ◽  
Interfacial Polarization ◽  
Breakdown Field ◽  
Test Results ◽  
Nano Zno ◽  
Inorganic Particles ◽  
Zno Particles ◽  
Ldpe Composites ◽  
Breakdown Field Strength

Nanocomposites exhibit a high dielectric strength, whereas microcomposites exhibit a high thermal conductivity. In this study, good insulating materials were developed on the basis of the synergetic effect of micro- and nanoparticles, which were used as inorganic fillers. With a double-melting blend, nano-ZnO/low density polyethylene (LDPE), micro-ZnO/LDPE, and micro-nano-ZnO/LDPE composites were prepared, according to the scanning electron microscope test, polarization microscope test, conductivity test, breakdown test, and dielectric spectrum test, the dielectric property of micro-nano-ZnO/LDPE was explored. The SEM test results showed that by adding a suitable proportion of ZnO particles, the inorganic particles could disperse uniformly without reuniting. The PLM test results showed that the micro- and nano-ZnO particles adding decreased the crystal size. The arrangement was regular and tight. The macroscopic results showed that the mass fraction of nanoparticles and microparticles were 3% and 2%, the samples conductivity was the lowest. The breakdown field strength of the nanocomposites increased. The breakdown field strength of nanocomposites with 1%, 3%, and 5% nanoparticle contents were 5%, 15%, and 10% higher than that of pure LDPE. The addition of inorganic particles resulted in new polarization modes: Ionic displacement polarization and interfacial polarization. The ZnO/LDPE composites exhibited a higher dielectric constant and dielectric loss factor than pure LDPE. However, with the increasing frequency, it took considerable time to attain interfacial polarization in the nanocomposite and micro-nanocomposite, thus decreasing the dielectric constant.

Comparative Characterization of Different Samples Containing Nano-ZnO Particles with Applicability in Topical Therapies

2019 ◽  
Vol 56 (3) ◽  
pp. 652-656
Author(s):  
Raul Chioibas ◽  
Florin Borcan ◽  
Ovidiu Mederle ◽  
Dana Stoian ◽  
Codruta Marinela Soica
Keyword(s):  
Synthesis Method ◽  
Pharmaceutical Preparations ◽  
Ultrasound Treatment ◽  
Heating Process ◽  
White Pigment ◽  
Nano Zno ◽  
Zno Particles ◽  
Repeated Freezing ◽  
Skin Healing

Zinc oxide (ZnO) is an inorganic compound used for its antiseptic and skin healing properties. It is an excellent protective filter against UV radiation and it can be used as white pigment in pharmaceutical preparations. In this study, nano-ZnO particles were obtained by ultrasound treatment, and respectively by repeated freezing/heating process. The influence of synthesis method and of ultrasound generator parameters on the particles size and stability was observed. The results reveal that were obtained samples with a very good stability and sizes between 15 and 96 nm. It was found that synthesis based on ultrasound treatment lead to the formation of nanoparticles with lower sizes.

Preparation and Co (II) Removal of ZnO/Poly-Piperazineamide Nanofiltration Membranes

2017 ◽  
Author(s):  
Xiaoguang Zhang ◽  
Xuexing Chen ◽  
Qingchun Chen ◽  
Zhaolong Deng ◽  
Yan Liu ◽  
...  
Keyword(s):  
Reaction Time ◽  
Monomer Concentration ◽  
Attenuated Total Reflection ◽  
Radioactive Nuclide ◽  
Separation Performance ◽  
Separation Mechanism ◽  
Nanofiltration Membranes ◽  
Terephthaloyl Chloride ◽  
Nano Zno ◽  
Zno Particles

A series of nanofiltration membranes were prepared by interfacial polymerization of piperazine and terephthaloyl chloride on the surface of polyacrylonitrile (PAN) ultrafiltration membranes. ZnO nanoparticles were incorporated in the active separation layer to modify the performances of the membranes. The preparation conditions as the monomer concentration, dosage of nano-ZnO particles and the reaction time on removal of a simulated radioactive nuclide Co (II) were investigated. Fourier transform infrared in attenuated total reflection mode verified the formation of polyamide on the PAN ultrafiltration membrane. The scanning electron microscope images showed that the nano-ZnO particles can homogeneously fixed on the membrane surface. The retention of Co (II) increased with increasing the dosage of nano-ZnO in the range of 0∼0.03 g. Further adding more nano-ZnO, the rejection rate of Co (II) first decreased and then increased. The concentration of piperazine and terephthaloyl chloride showed similar effect on removal of Co (II) ion. 5 minutes polymerization time was sufficient to form an active separation layer on the substrate membrane which changed the separation mechanism from ultrafiltration to nanofiltration. The separation performance of NF3 prepared by the following conditions was optimum: 0.03g nano-ZnO, 0.6 wt% piperazine, 0.5 wt% terephthaloyl chloride, and the reaction time was 15 min. The rejection rates of 1000 mg/L Na2SO4 and Co2+ in CoCl2 solution were 90% and 75% respectively. The Co (II) removal rate can be increased to nearly 90% by using ethylenediaminetetraacetic acid disodium salt. Increasing the operation pressure or the feeding concentration of Co (II) can also improve the performances of the membranes in this experiment.

Effect of Bi Addition on the Corrosion Behavior of Zirconium Alloys

2013 ◽  
Author(s):  
M. Y. Yao ◽  
B. X. Zhou ◽  
Q. Li ◽  
W. P. Zhang ◽  
L. Zhu ◽  
...  
Keyword(s):  
Solid Solution ◽  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Mass Fraction ◽  
Zirconium Alloys ◽  
Deionized Water ◽  
Second Phase ◽  
Micro Structure ◽  
Second Phase Particles ◽  
Structure Observation

In order to investigate systematically the effect of Bi addition on the corrosion resistance of zirconium alloys, different zirconium-based alloys, including Zr-4 (Zr-1.5Sn-0.2Fe-0.1Cr), S5 (Zr-0.8Sn-0.35Nb-0.4Fe-0.1Cr), T5 (Zr-0.7Sn-1.0Nb-0.3Fe-0.1Cr) and Zr-1Nb, were adopted to prepare the zirconium alloys containing Bi of 0∼0.5% in mass fraction. These alloys were denoted as Zr-4+xBi, S5+xBi, T5+xBi and Zr-1Nb+xBi, respectively. The corrosion behavior of these specimens was investigated by autoclave testing in lithiated water with 0.01 M LiOH or deionized water at 360°C/18.6 MPa and in superheated steam at 400 °C/10.3 MPa. The micro structure of the alloys was examined by TEM and the second phase particles (SPPs) were analyzed by EDS. Micro structure observation shows that the addition of Bi promotes the precipitation of Sn as second phase particles (SPPs) because Sn is in solid solution in α-Zr matrix in Zr-4, S5 and T5 alloys. The concentration of Bi dissolved in α-Zr matrix increase with the increase of Nb in the alloys, and the excess Bi precipitates as Bi-containing SPPs. The corrosion results show that the effect of Bi addition on the corrosion behavior of different zirconium-based alloys is very complicated, depending on their compositions and corrosion conditions. In the case of higher Bi concentration in α-Zr, the zirconium alloys exhibit better corrosion resistance. However, in the case of precipitation of Bi-containing SPPs, the corrosion resistance gets worse. This indicates that the solid solution of Bi in α-Zr matrix can improve the corrosion resistance, while the precipitation of the Bi-containing SPPs is harmful to the corrosion resistance.

Sign in / Sign up

Export Citation Format

Share Document