scholarly journals Preparation and Characteristics of Wet-Spun Filament Made of Cellulose Nanofibrils with Different Chemical Compositions

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 949 ◽  
Author(s):  
Chan-Woo Park ◽  
Ji-Soo Park ◽  
Song-Yi Han ◽  
Eun-Ah Lee ◽  
Gu-Joong Kwon ◽  
...  
Keyword(s):  
High Pressure ◽  
Tensile Strength ◽  
Cellulose Nanofibrils ◽  
Chemical Compositions ◽  
High Pressure Homogenization ◽  
Cellulose Nanofibril ◽  
X Ray Diffraction ◽  
Cellulose I ◽  
Filtration Time ◽  
X Ray

In this study, wet-spun filaments were prepared using lignocellulose nanofibril (LCNF), with 6.0% and 13.0% of hemicellulose and lignin, respectively, holocellulose nanofibril (HCNF), with 37% hemicellulose, and nearly purified-cellulose nanofibril (NP-CNF) through wet-disk milling followed by high-pressure homogenization. The diameter was observed to increase in the order of NP-CNF ≤ HCNF < LCNF. The removal of lignin improved the defibrillation efficiency, thus increasing the specific surface area and filtration time. All samples showed the typical X-ray diffraction pattern of cellulose I. The orientation of CNFs in the wet-spun filaments was observed to increase at a low concentration of CNF suspensions and high spinning rate. The increase in the CNF orientation improved the tensile strength and elastic modulus of the wet-spun filaments. The tensile strength of the wet-spun filaments decreased in the order of HCNF > NP-CNF > LCNF.

scholarly journals Preparation of Nanoparticles Including Antisolvent Drugs by the Combination of Roll Milling and High-pressure Homogenization

2018 ◽  
Vol 14 (2) ◽  
pp. 143-147 ◽  
Author(s):  
Seitaro Kamiya ◽  
Maya Yamada ◽  
Miki Washino ◽  
Kenichiro Nakashima
Keyword(s):  
Particle Size ◽  
High Pressure ◽  
Organic Solvent ◽  
Organic Solvents ◽  
Peak Shift ◽  
Diffraction Peak ◽  
High Pressure Homogenization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Process

Description: Design methods of nanoparticle formulations are divided into break-down methods and build-up methods. The former is further divided into dry and wet processes. For drug nanoparticle preparations, the wet process is generally employed, and organic solvents are used in most formulations. Method: In this study, we investigate the preparation of nifedipine (IB) and griseofulvin (GF) nanoparticles without using organic solvent. Both IB and GF nanoparticles, with a mean particle size of approximately 50 nm, were prepared without organic solvent by employing a combination of roll milling and high-pressure homogenization. Result: The X-ray diffraction peak of the IB and GF samples prepared by roll milling was present at a position (2θ) identical to that of IB and GF crystals, indicating that no peak shift was induced by interaction with phospholipids. Conclusion: These findings demonstrate that most IB and GF nanoparticles exist as crystals in phospholipids.

scholarly journals Influence of Mercerization on Micro-structure and Properties of Kapok Blended Yarns with Different Blending Ratios

2011 ◽  
Vol 6 (3) ◽  
pp. 155892501100600 ◽  
Author(s):  
Jie Liu ◽  
Fumei Wang
Keyword(s):  
Alkali Treatment ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Cellulose I ◽  
Micro Structure ◽  
Obvious Effect ◽  
Kapok Fiber ◽  
X Ray ◽  
Before And After ◽  
Mercerization Treatment

To investigate the effect of mercerization on micro-structure and the properties of kapok/cotton blended yarns. FTIR spectra and x-ray diffraction (XRD) results, moisture regains and mechanical properties of blended yarns were compared before and after mercerization. The results show that mercerization treatment did not have an obvious effect on chemical compositions of cellulose, but did lead to decreasing on crystallinity of blended yarns, and transformed certain portion of cellulose I into cellulose II. When the NaOH concentration increased from 180g/L to 250 g/L, the strengths of blended yarns increased and elongations at breaking declined, and the extent of changes were lessened gradually with the increase of kapok fiber content, when the NaOH concentration further reached 280g/L, the strengths of blended yarns with high content of kapok fiber dropped dramatically, and elongations at breaking increased gradually, while hygroscopicities of blended yarns increased significantly. Different from cotton fiber, a more moderate alkali treatment condition should be chosen in mercerization process for kapok fiber.

Effect of high pressure-temperature on silicon layered structures as determined by X-ray diffraction and electron microscopy

2004 ◽  
Vol 27 (1-3) ◽  
pp. 415-418
Author(s):  
J. Bak-Misiuk ◽  
A. Misiuk ◽  
J. Ratajczak ◽  
A. Shalimov ◽  
I. Antonova ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Pressure ◽  
Layered Structures ◽  
X Ray Diffraction ◽  
X Ray

Revisiting the High-Pressure Properties of the Metal-Organic Frameworks ZIF-8 and ZIF-67

2020 ◽  
Author(s):  
Pia Vervoorts ◽  
Stefan Burger ◽  
Karina Hemmer ◽  
Gregor Kieslich
Keyword(s):  
High Pressure ◽  
State Of The Art ◽  
Energy Landscape ◽  
Structural Flexibility ◽  
Zeolitic Imidazolate Frameworks ◽  
Stimuli Responsive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Open Questions ◽  
Metal Organic

The zeolitic imidazolate frameworks ZIF-8 and ZIF-67 harbour a series of fascinating stimuli responsive properties. Looking at their responsitivity to hydrostatic pressure as stimulus, open questions exist regarding the isotropic compression with non-penetrating pressure transmitting media. By applying a state-of-the-art high-pressure powder X-ray diffraction setup, we revisit the high-pressure behaviour of ZIF-8 and ZIF-67 up to <i>p</i> = 0.4 GPa in small pressure increments. We observe a drastic, reversible change of high-pressure powder X-ray diffraction data at <i>p</i> = 0.3 GPa, discovering large volume structural flexibility in ZIF-8 and ZIF-67. Our results imply a shallow underlying energy landscape in ZIF-8 and ZIF-67, an observation that might point at rich polymorphism of ZIF-8 and ZIF-67, similar to ZIF-4(Zn).<br>

Revisiting the High-Pressure Properties of the Metal-Organic Frameworks ZIF-8 and ZIF-67

2020 ◽  
Author(s):  
Pia Vervoorts ◽  
Stefan Burger ◽  
Karina Hemmer ◽  
Gregor Kieslich
Keyword(s):  
High Pressure ◽  
State Of The Art ◽  
Energy Landscape ◽  
Structural Flexibility ◽  
Zeolitic Imidazolate Frameworks ◽  
Stimuli Responsive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Open Questions ◽  
Metal Organic

The zeolitic imidazolate frameworks ZIF-8 and ZIF-67 harbour a series of fascinating stimuli responsive properties. Looking at their responsitivity to hydrostatic pressure as stimulus, open questions exist regarding the isotropic compression with non-penetrating pressure transmitting media. By applying a state-of-the-art high-pressure powder X-ray diffraction setup, we revisit the high-pressure behaviour of ZIF-8 and ZIF-67 up to <i>p</i> = 0.4 GPa in small pressure increments. We observe a drastic, reversible change of high-pressure powder X-ray diffraction data at <i>p</i> = 0.3 GPa, discovering large volume structural flexibility in ZIF-8 and ZIF-67. Our results imply a shallow underlying energy landscape in ZIF-8 and ZIF-67, an observation that might point at rich polymorphism of ZIF-8 and ZIF-67, similar to ZIF-4(Zn).<br>

scholarly journals High-pressure synthesis and crystal structure of the mixed-cation borate Ga4In4B15O33(OH)3

2019 ◽  
Vol 74 (4) ◽  
pp. 357-363
Author(s):  
Daniela Vitzthum ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
High Temperature ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Synthesis And Crystal Structure ◽  
X Ray ◽  
Mixed Cation ◽  
High Pressure High Temperature ◽  
Pressure Synthesis

AbstractThe mixed cation triel borate Ga4In4B15O33(OH)3 was synthesized in a Walker-type multianvil apparatus at high-pressure/high-temperature conditions of 12.5 GPa and 1300°C. Although the product could not be reproduced in further experiments, its crystal structure could be reliably determined via single-crystal X-ray diffraction data. Ga4In4B15O33(OH)3 crystallizes in the tetragonal space group I41/a (origin choice 2) with the lattice parameters a = 11.382(2), c = 15.244(2) Å, and V = 1974.9(4) Å3. The structure of the quaternary triel borate consists of a complex network of BO4 tetrahedra, edge-sharing InO6 octahedra in dinuclear units, and very dense edge-sharing GaO6 octahedra in tetranuclear units.

scholarly journals New Insights into the Crystal Chemistry of Elpidite, Na2Zr[Si6O15]·3H2O and (Na1+YCax□1−X−Y)Σ=2Zr[Si6O15]·(3−X)H2O, and Ab Initio Modeling of IR Spectra

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2160
Author(s):  
Alexander Bogdanov ◽  
Ekaterina Kaneva ◽  
Roman Shendrik
Keyword(s):  
Ir Spectra ◽  
Structural Models ◽  
Chemical Characterization ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Special Group ◽  
X Ray ◽  
Influence Of Water ◽  
Radioactive Species

Elpidite belongs to a special group of microporous zirconosilicates, which are of great interest due to their capability to uptake various molecules and ions, e.g., some radioactive species, in their structural voids. The results of a combined electron probe microanalysis and single-crystal X-ray diffraction study of the crystals of elpidite from Burpala (Russia) and Khan-Bogdo (Mongolia) deposits are reported. Some differences in the chemical compositions are observed and substitution at several structural positions within the structure of the compounds are noted. Based on the obtained results, a detailed crystal–chemical characterization of the elpidites under study was carried out. Three different structure models of elpidite were simulated: Na2ZrSi6O15·3H2O (related to the structure of Russian elpidite), partly Ca-replaced Na1.5Ca0.25ZrSi6O15·2.75H2O (close to elpidite from Mongolia), and a hypothetical CaZrSi6O15·2H2O. The vibration spectra of the models were obtained and compared with the experimental one, taken from the literature. The strong influence of water molecule vibrations on the shape of IR spectra of studied structural models of elpidite is discussed in the paper.

scholarly journals High Pressure X-ray Diffraction as a Tool for Designing Doped Ceria Thin Films Electrolytes

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 724
Author(s):  
Sara Massardo ◽  
Alessandro Cingolani ◽  
Cristina Artini
Keyword(s):  
Thin Films ◽  
High Pressure ◽  
Rare Earth ◽  
Ionic Conductivity ◽  
Bulk Material ◽  
Threshold Temperature ◽  
Doped Ceria ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rare Earth Doped

Rare earth-doped ceria thin films are currently thoroughly studied to be used in miniaturized solid oxide cells, memristive devices and gas sensors. The employment in such different application fields derives from the most remarkable property of this material, namely ionic conductivity, occurring through the mobility of oxygen ions above a certain threshold temperature. This feature is in turn limited by the association of defects, which hinders the movement of ions through the lattice. In addition to these issues, ionic conductivity in thin films is dominated by the presence of the film/substrate interface, where a strain can arise as a consequence of lattice mismatch. A tensile strain, in particular, when not released through the occurrence of dislocations, enhances ionic conduction through the reduction of activation energy. Within this complex framework, high pressure X-ray diffraction investigations performed on the bulk material are of great help in estimating the bulk modulus of the material, and hence its compressibility, namely its tolerance toward the application of a compressive/tensile stress. In this review, an overview is given about the correlation between structure and transport properties in rare earth-doped ceria films, and the role of high pressure X-ray diffraction studies in the selection of the most proper compositions for the design of thin films.

scholarly journals High-pressure synthesis of REB5O8(OH)2 (RE = Ho, Er, Tm)

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Michael Zoller ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
Rare Earth ◽  
Ir Spectroscopy ◽  
Earth Metal ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Solution ◽  
Pressure Synthesis ◽  
The Rare Earth

AbstractThe rare earth oxoborates REB5O8(OH)2 (RE = Ho, Er, Tm) were synthesized in a Walker-type multianvil apparatus at a pressure of 2.5 GPa and a temperature of 673 K. Single-crystal X-ray diffraction data provided the basis for the structure solution and refinement. The compounds crystallize in the monoclinic space group C2 (no. 5) and are composed of a layer-like structure containing dreier and sechser rings of corner sharing [BO4]5− tetrahedra. The rare earth metal cations are coordinated between two adjacent sechser rings. Further characterization was performed utilizing IR spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document