scholarly journals FRP Confinement of Stone Samples after Real Fire Exposure

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2367
Author(s):  
Luis Estevan ◽  
F. Javier Baeza ◽  
Francisco B. Varona ◽  
Salvador Ivorra
Keyword(s):  
Mechanical Properties ◽  
Fiber Reinforced Polymer ◽  
Fire Exposure ◽  
Irreversible Damage ◽  
Reinforced Polymer ◽  
Stone Materials ◽  
Temperature Exposure ◽  
Frp Confinement ◽  
Strength And Ductility ◽  
Interesting Alternative

The mechanical properties of stone materials can be severely affected by exposure to high temperatures. The effect of fire on stone buildings could cause irreversible damage and make it necessary to retrofit the affected elements. Particularly, the strengthening of columns by confinement with composites has been widely improved during the last decades. Today, fiber reinforced polymer (FRP) confinement represents a very interesting alternative to traditional steel solutions. This work studied the behavior of cylindrical stone specimens subjected to real fire action and confined by means of CFRP or GFRP jackets, with the aim of assessing the effectiveness of these reinforcement systems applied to a material that has previously been seriously damaged by high temperature exposure. In general, the strengthened samples showed notable increases in strength and ductility. The response seemed to depend basically on the FRP properties and not on the degree of damage that the stone core may have suffered. Finally, the results obtained experimentally were compared with the confinement models proposed by the available design guides, in order to evaluate the accuracy that these models can offer under the different situations addressed in this research.

scholarly journals Experimental Study of Aged and Seriously Damaged RC Beams Strengthened Using CFRP Composites

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Ning Zhuang ◽  
Honghan Dong ◽  
Da Chen ◽  
Yeming Ma
Keyword(s):  
Mechanical Properties ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Rc Beams ◽  
Yield Load ◽  
Cfrp Laminates ◽  
Load Growth ◽  
Reinforced Polymer ◽  
Bonding Length ◽  
Damaged Beams

This paper presents results from experiments on aged and seriously damaged reinforced concrete (RC) beams strengthened with different arrangements of external carbon fiber-reinforced polymer (CFRP) laminates and end anchorages. Seven RC beams from an old bridge, measuring 250 × 200 × 2300 mm, were tested. All specimens were loaded to yield load to evaluate initial mechanical properties. Then, these seriously damaged specimens were repaired using different CFRP-reinforcing schemes and reloaded to failure. The yield load growth due to CFRP reinforcement ranged from 5% to 36%. Different parameters including CFRP dimension and position, bonding length, and end anchorage were investigated and facilitated conclusions on beam ductility, load-midspan deflection response, and failure mode. This research contributes to knowledge about the CFRP repair of aged and seriously damaged beams to ensure better performance in overloaded conditions.

Assessing of Mechanical Properties of Natural Fiber Reinforced Polymer Matrix Hybrid Composites

2015 ◽  
Vol 766-767 ◽  
pp. 199-204 ◽  
Author(s):  
Kumar Jayachandran Nirmal ◽  
D. Premkumar
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Natural Fibres ◽  
Fiber Reinforced Polymer ◽  
Resin Matrix ◽  
Reinforced Polymer ◽  
Individual Type

An experimental analysis has been carried out to investigate the mechanical properties of composites reinforced by sisal, coir, and banana fibres into epoxy resin matrix. The natural fibres were extracted by retting and manual processes. The composites fabricated by epoxy resin and reinforcement in the hybrid combination of Sisal-Banana and Sisal-Coir with the volume fraction of fibres varying from 5% to 30%. It has been identified that the mechanical properties increase with the increase of volume fraction of fibres to a certain extent and then decreases. The hybridization of the reinforcement in the composite shows greater mechanical properties when compared to individual type of natural fibres reinforced. For all the composites tested, the tensile strength of the composite increased up to 25% of volume fraction of the fibres and further for the increase in the volume fraction of fibre the mechanical properties were decreased. As same as tensile properties, the flexural and impact strength also increased linearly up to 25% of volume fraction of fibres and further for the increase in the volume fraction of fibre the mechanical properties were slightly decreased. Key Words: Sisal, Banana, Coir, Epoxy, Hybrid composite.

Effect of Mechanical Properties on Various Surface Treatment Processes of Banana/Cotton Woven Fabric Vinyl Ester Composite

2017 ◽  
Vol 867 ◽  
pp. 41-47 ◽  
Author(s):  
Chitra Umachitra ◽  
N.K. Palaniswamy ◽  
O.L. Shanmugasundaram ◽  
P.S. Sampath
Keyword(s):  
Mechanical Properties ◽  
Composite Structures ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Surface Treatments ◽  
Fiber Reinforced Polymer ◽  
Woven Fabric ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Structural Applications

Natural fibers have been used to reinforce materials in many composite structures. Many types of natural fibers have been investigated including flax, hemp, ramie, sisal, abaca, banana etc., due to the advantage that they are light weight, renewable resources and have marketing appeal. These agricultural wastes can also be used to prepare fiber reinforced polymer hybrid composites in various combinations for commercial use. Application of composite materials in structural applications has presented the need for the engineering analysis. The present work focuses on the fabrication of polymer matrix composites by using natural fibers like banana and cotton which are abundant in nature and analysing the effect of mechanical properties of the composites on different surface treatments on the fabric. The effect of various surface treatments (NaOH, SLS, KMnO4) on the mechanical properties namely tensile, flexural and impact was analyzed and are discussed in this project. Analysing the material characteristics of the compression moulded composites; their results were measured on sections of the material to make use of the natural fiber reinforced polymer composite material for automotive seat shell manufacturing.

The effect of environmental humidity/water absorption on tribo-mechanical performance of polymers and polymer composites – a review

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kawaljit Singh Randhawa ◽  
Ashwin Patel
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Tribological Properties ◽  
Fiber Reinforced Polymer ◽  
Content Type ◽  
Wear Rates ◽  
Mechanical And Tribological Properties ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites ◽  
Water Conditions

Purpose The mechanical and tribological properties of polymers and polymer composites vary with different environmental conditions. This paper aims to review the influence of humidity/water conditions on various polymers and polymer composites' mechanical properties and tribological behaviors. Design/methodology/approach The influence of humidity and water absorption on mechanical and tribological properties of various polymers, fillers and composites has been discussed in this paper. Tensile strength, modulus, yield strength, impact strength, COF and wear rates of polymer composites are compared for different environmental conditions. The interaction between the water molecules and hydrophobic polymers is also represented. Findings Pure polymer matrices show somewhat mixed behavior in humid environments. Absorbed moisture generally plasticizes the epoxies and polyamides and lowers the tensile strength, yield strength and modulus. Wear rates of PVC generally decrease in humid environments, while for polyamides, it increases. Fillers like graphite and boron-based compounds exhibit low COF, while MoS2 particulate fillers exhibit higher COF at high humidity and water conditions. The mechanical properties of fiber-reinforced polymer composites tend to decrease as the rate of humidity increases while the wear rates of fiber-reinforced polymer composites show somewhat mixed behavior. Particulate fillers like metals and advanced ceramics reinforced polymer composites exhibit low COF and wear rates as the rate of humidity increases. Originality/value The mechanical and tribological properties of polymers and polymer composites vary with the humidity value present in the environment. In dry conditions, wear loss is determined by the hardness of the contacting surfaces, which may not effectively work for high humid environments. The tribological performance of composite constituents, i.e. matrix and fillers in humid environments, defines the overall performance of polymer composite in said environments.

Sign in / Sign up

Export Citation Format

Share Document