scholarly journals Effects of Nanoclay on Mechanical and Dynamic Mechanical Properties of Bamboo/Kenaf Reinforced Epoxy Hybrid Composites

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 395
Author(s):  
Siew Sand Chee ◽  
Mohammad Jawaid ◽  
Othman Y. Alothman ◽  
Hassan Fouad
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composites ◽  
High Strength ◽  
Dynamic Mechanical Properties ◽  
Hybrid Nanocomposites ◽  
Tensile Fracture ◽  
Dynamic Mechanical ◽  
Pull Out ◽  
Bearing Structure ◽  
Tukey Method

Current work aims to study the mechanical and dynamical mechanical properties of non-woven bamboo (B)/woven kenaf (K)/epoxy (E) hybrid composites filled with nanoclay. The nanoclay-filled BK/E hybrid composites were prepared by dispersing 1 wt.% nanoclay (organically-modified montmorillonite (MMT; OMMT), montmorillonite (MMT), and halloysite nanotube (HNT)) with high shear speed homogenizer followed by hand lay-up fabrication technique. The effect of adding nanoclay on the tensile, flexural, and impact properties of the hybrid nanocomposites were studied. Fractography of tensile-fractured sample of hybrid composites was studied by field emission scanning electron microscope. The dynamic mechanical analyzer was used to study the viscoelastic properties of the hybrid nanocomposites. BK/E-OMMT exhibit enhanced mechanical properties compared to the other hybrid nanocomposites, with tensile, flexural, and impact strength values of 55.82 MPa, 105 MPa, and 65.68 J/m, respectively. Statistical analysis and grouping information were performed by one-way ANOVA (analysis of variance) and Tukey method, and it corroborates that the mechanical properties of the nanoclay-filled hybrid nanocomposites are statistically significant. The storage modulus of the hybrid nanocomposites was improved by 98.4%, 41.5%, and 21.7% with the addition of OMMT, MMT, and HNT, respectively. Morphology of the tensile fracture BK/E-OMMT composites shows that lesser voids, microcracks and fibers pull out due to strong fiber–matrix adhesion compared to other hybrid composites. Hence, the OMMT-filled BK/E hybrid nanocomposites can be utilized for load-bearing structure applications, such as floor panels and seatbacks, whereby lightweight and high strength are the main requirements.

scholarly journals Dynamic Mechanical Properties of Hybrid Layered Silicates/Kaolin Geopolymer Filler in Epoxy Composites

2017 ◽  
Vol 54 (3) ◽  
pp. 543-545 ◽  
Author(s):  
Yusrina Mat Daud ◽  
Kamarudin Hussin ◽  
Azlin Fazlina Osman ◽  
Che Mohd Ruzaidi Ghazali ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Speed ◽  
Hybrid Composites ◽  
Loss Modulus ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Layered Silicates ◽  
Epoxy Composites ◽  
Damping Factor ◽  
Dynamic Mechanical

Preparation epoxy based hybrid composites were involved kaolin geopolymer filler, organo-montmorillonite at 3phr by using high speed mechanical stirrer. A mechanical behaviour of neat epoxy, epoxy/organo-montmorillonite and its hybrid composites containing 1-8phr kaolin geopolymer filler was studied upon cyclic deformation (three-point flexion mode) as the temperature is varies. The analysis was determined by dynamic mechanical analysis (DMA) at frequency of 1.0Hz. The results then expressed in storage modulus (E�), loss modulus (E�) and damping factor (tan d) as function of temperature from 40 oC to 130oC. Overall results indicated that E�, E�� and Tg increased considerably by incorporating optimum 1phr kaolin geopolymer in epoxy organo-montmorillonite hybrid composites.

The static and dynamic mechanical properties of kenaf/glass fibre reinforced hybrid composites

2018 ◽  
Vol 5 (9) ◽  
pp. 095304 ◽  
Author(s):  
Sivakumar Dhar Malingam ◽  
Lin Feng Ng ◽  
Kin How Chan ◽  
Kathiravan Subramaniam ◽  
Mohd Zulkefli Selamat ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Hybrid Composites ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical ◽  
Glass Fibre Reinforced

scholarly journals Enhancement of Mechanical and Dynamic Mechanical Properties of Hydrophilic Nanoclay Reinforced Polylactic Acid/Polycaprolactone/Oil Palm Mesocarp Fiber Hybrid Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Chern Chiet Eng ◽  
Nor Azowa Ibrahim ◽  
Norhazlin Zainuddin ◽  
Hidayah Ariffin ◽  
Wan Md. Zin Wan Yunus ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Oil Palm ◽  
Hybrid Composites ◽  
Loss Modulus ◽  
Impact Resistance ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Dynamic Mechanical ◽  
The Fourier Transform

In previous studies, the effect of the addition of 1 wt% hydrophilic nanoclay on polylactic acid (PLA)/polycaprolactone (PCL)/oil palm mesocarp fiber (OPMF) biocomposites was investigated by tensile properties, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The current studies focus on the effect of addition of 1 wt% hydrophilic nanoclay on mechanical (flexural and impact properties) and dynamic mechanical properties of composites. The composites were characterized by the Fourier transform infrared spectroscopy (FTIR) and dynamic mechanical analysis (DMA). FTIR spectra show that peak shifting occurs when 1 wt% hydrophilic nanoclay was added to composites. The addition of 1 wt% hydrophilic nanoclay successfully improves the flexural properties and impact resistance of the biocomposites. The storage modulus of biocomposites was decreased when nanoclay was added which indicates that the stiffness of biocomposites was reduced. The loss modulus curve shows that the addition of nanoclay shift twotgin composites become closer to each other which indicates that the incorporation of nanoclay slightly compatibilizes the biocomposites. Tanδindicated that hybrid composites dissipate less energy compared to biocomposites indicate that addition of clay to biocomposites improves fiber/matrix adhesion. Water sorption test shows that the addition of nanoclay enhances water resistance of composites.

Magnesium based hybrid nanocomposites: An insight into nanoparticle effects on the microstructure and mechanical properties

2021 ◽  
Vol 06 ◽  
Author(s):  
Sankaranarayanan Sankaranarayanan ◽  
Jayalakshmi Subramanian ◽  
R. Arvind Singh ◽  
Manoj Gupta
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Hybrid Nanocomposites ◽  
Tensile Fracture ◽  
Microstructure And Mechanical Properties ◽  
B4c Particles

Aims: The primary aim of this research is to understand the effects of type of nanoparticles on the microstructure and mechanical properties of Mg-based hybrid nanocomposites. For this reason, new Mg-based hybrid nanocomposites containing 2.2 vol.% Ti and 1.1 vol.% nano-Al2O3 or nano B4C particles were synthesized and their properties were studied in comparison with Mg-Ti and pure Mg. Background: Magnesium with excellent weight-saving potential is ideal for automotive and aerospace applications. But its use in pure Mg is restricted due to inherent limitations such as poor absolute strength, elastic modulus, deformability, and corrosion susceptibility. While most of these limitations can be circumvented by the judicious addition of micron-sized ceramic reinforcements, ductility is often compromised. One of the promising ways for ductility enhancement involves the use of nano length scale reinforcements. Similar ductility improvements were also reported when hybrid reinforcements were introduced into the Mg matrix. While the role of hybrid reinforcement preparation, the particle size distribution, and volume fraction of hybrid reinforcements were studied extensively in the past, no detailed investigation on the effects of type of nanoparticles has been conducted so far. Objective: The objectives of this research include the successful synthesis and property characterization of Mg-based hybrid nanocomposites containing hybrid (Ti+Al2O3 or Ti+B4C) reinforcements. Result: While both hybrid nanocomposites displayed fine grains when compared to pure Mg and Mg-Ti, there was no noticeable difference between the grain size distribution profiles of Mg-(Ti+Al2O3) and Mg-(Ti+B4C) hybrid composites. The results of property measurements indicated an improvement in dimensional stability, indentation, tension, and compression properties of Mg due to the addition of either individual Ti or hybrid (Ti+Al2O3) or Mg-(Ti+B4C) particles. Among the hybrid composites, Mg-(Ti+B4C) containing hybrid (Ti+B4C) reinforcement exhibited a better combination of strengths and ductility. While the inherent strengthening contribution from B4C and Al2O3 reinforcements resulted in slightly different strength properties, the ductilization benefits of boron compounds enhanced the tensile fracture strain of Mg-(Ti+B4C). Conclusion: Since the particle size distribution and volume fraction of (Ti+Al2O3) and (Ti+B4C) are similar, the difference in strength values between Mg-(Ti+Al2O3) and Mg-(Ti+B4C) can be attributed to the matrix strengthening contribution from reinforcement type.

Sign in / Sign up

Export Citation Format

Share Document