scholarly journals Dual Temperature and Metal Salts-Responsive Interpenetrating Polymer Networks Composed of Poly (N-isopropylacrylamide) and Polyethylene Glycol

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1750
Author(s):  
Junta Sano ◽  
Shigeki Habaue
Keyword(s):  
Polyethylene Glycol ◽  
Color Change ◽  
Polymer Networks ◽  
Interpenetrating Polymer Networks ◽  
Metal Salts ◽  
Step Method ◽  
Color Changes ◽  
Dual Responsive ◽  
Silyl Groups ◽  
Change Response

Novel interpenetrating polymer networks (IPNs) composed of poly(N-isopropylacrylamide) (poly-NIPAM) and polyethers—namely, polyethylene glycol (PEG) and poly(tetramethylene oxide)—were synthesized in the absence and presence of polysiloxane containing a silanol residue. Gelation was accomplished using end-capped polyethers with trimethoxysilyl moieties and proceeded through simultaneous radical gelation of NIPAM and condensation of the silyl groups to form siloxane linkages. Thus, a novel one-step method constructing an IPN structure was provided. The obtained IPNs showed a gentle temperature-responsive volume change in water owing to the constructed poly-NIPAM gel component. In addition, a specific color-change response to chemical stimuli, such as CuCl2 and AgNO3 in water, was observed only when both components of poly-NIPAM and PEG existed in a gel form. For example, a single network gel composed of poly-NIPAM or PEG was isolated as a pale blue hydrogel, whereas IPNs composed of poly-NIPAM and PEG components turned yellow after swelling in an aqueous CuCl2 solution (0.1 M, pale blue). Dual-responsive functionalities of the synthesized hydrogels to temperature and metal salts, along with volume and color changes, were demonstrated.

scholarly journals Semi-Interpenetrating Polymer Networks Based on Cyanate Ester and Highly Soluble Thermoplastic Polyimide

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 862 ◽  
Author(s):  
Jingfeng Liu ◽  
Weifeng Fan ◽  
Gewu Lu ◽  
Defeng Zhou ◽  
Zhen Wang ◽  
...  
Keyword(s):  
High Performance ◽  
Elevated Temperatures ◽  
Polymer Networks ◽  
Gelation Time ◽  
Interpenetrating Polymer Networks ◽  
Step Method ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Biphenyltetracarboxylic Dianhydride ◽  
The Impact

Thermoplastic polyimide (TPI) was synthesized via a traditional one-step method using 2,3,3′,4′-biphenyltetracarboxylic dianhydride (3,4′-BPDA), 4,4′-oxydianiline (4,4′-ODA), and 2,2′-bis(trifluoromethyl)benzidine (TFMB) as the monomers. A series of semi-interpenetrating polymer networks (semi-IPNs) were produced by dissolving TPI in bisphenol A dicyanate (BADCy), followed by curing at elevated temperatures. The curing reactions of BADCy were accelerated by TPI in the blends, reflected by lower curing temperatures and shorter gelation time determined by differential scanning calorimetry (DSC) and rheological measurements. As evidenced by scanning electron microscopy (SEM) images, phase separation occurred and continuous TPI phases were formed in semi-IPNs with a TPI content of 15% and 20%. The properties of semi-IPNs were systematically investigated according to their glass transition temperatures (Tg), thermo-oxidative stability, and dielectric and mechanical properties. The results revealed that these semi-IPNs possessed improved mechanical and dielectric properties compared with pure polycyanurate. Notably, the impact strength of semi-IPNs was 47%–320% greater than that of polycyanurate. Meanwhile, semi-IPNs maintained comparable or even slightly higher thermal resistance in comparison with polycyanurate. The favorable processability and material properties make TPI/BADCy blends promising matrix resins for high-performance composites and adhesives.

scholarly journals Chemical-Physical Behaviour of Microgels Made of Interpenetrating Polymer Networks of PNIPAM and Poly(acrylic Acid)

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1353
Author(s):  
Valentina Nigro ◽  
Roberta Angelini ◽  
Monica Bertoldo ◽  
Elena Buratti ◽  
Silvia Franco ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Polymer Networks ◽  
Experimental Studies ◽  
Interpenetrating Polymer Networks ◽  
Temperature Sensitive ◽  
Particle Structure ◽  
Ionic Charge ◽  
Stimuli Responsive Polymers ◽  
Dual Responsive ◽  
Poly Acrylic Acid

Microgels composed of stimuli responsive polymers have attracted worthwhile interest as model colloids for theorethical and experimental studies and for nanotechnological applications. A deep knowledge of their behaviour is fundamental for the design of new materials. Here we report the current understanding of a dual responsive microgel composed of poly(N-isopropylacrylamide) (PNIPAM), a temperature sensitive polymer, and poly(acrylic acid) (PAAc), a pH sensitive polymer, at different temperatures, PAAc contents, concentrations, solvents and pH. The combination of multiple techniques as Dynamic Light Scattering (DLS), Raman spectroscopy, Small Angle Neutron Scattering (SANS), rheology and electrophoretic measurements allow to investigate the hydrodynamic radius behaviour across the typical Volume Phase Transition (VPT), the involved molecular mechanism and the internal particle structure together with the viscoelastic properties and the role of ionic charge in the aggregation phenomena.

Assessment of Color Stability of Treated Leathers with Silicone Oil and Polyethylene Glycol

2014 ◽  
Vol 1 (1) ◽  
pp. 24-34
Author(s):  
Alireza K. ◽  
Hossein Ahmadi ◽  
Mohsen Mohammadi
Keyword(s):  
Ascorbic Acid ◽  
Polyethylene Glycol ◽  
Treatment Process ◽  
Color Change ◽  
Silicone Oil ◽  
Accelerated Aging ◽  
Color Stability ◽  
Antioxidant Additive ◽  
Before And After ◽  
Aesthetic Values

Lubricants and leather dressings are the most common treatments of dry and water logged historical leathers. Color change has a great importance during the time and treatment process, due to visual and aesthetic values of historic leather relics. Polyethylene glycol (PEG) and silicone oil (SiO) are frequently used leather dressings in the conservation procedures. Therefore, color stability of treated leathers with PEG and SiO were investigated before and after heat accelerated aging. Moreover, application of ascorbic acid was evaluated as an antioxidant additive for PEG (PEG+AA).Color change after treatment and aging were studied by colorimetry technique in the CIE *L*a*b system. Results indicated to severe color alteration in PEG treated and aged leathers with or without ascorbic acid. Whereas, SiO treated samples showed better stability and minimum color shift after aging. Silicone oil was characterized as the best dressing for historical leathers with compared to PEG and PEG+AA, due to its high stability and aesthetical properties.

scholarly journals The microscopic distribution of hydrophilic polymers in interpenetrating polymer networks (IPNs) of medical grade silicone

Polymer ◽  
2021 ◽  
Vol 224 ◽  
pp. 123671
Author(s):  
Gregory N. Smith ◽  
Erik Brok ◽  
Martin Schmiele ◽  
Kell Mortensen ◽  
Wim G. Bouwman ◽  
...  
Keyword(s):  
Polymer Networks ◽  
Interpenetrating Polymer Networks ◽  
Hydrophilic Polymers ◽  
Microscopic Distribution ◽  
Medical Grade

scholarly journals Investigation of the selective color-changing mechanism of Dynastes tityus beetle (Coleoptera: Scarabaeidae)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiyu Sun ◽  
Wei Wu ◽  
Limei Tian ◽  
Wei Li ◽  
Fang Zhang ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Color Change ◽  
Incidence Angle ◽  
Ion Beam ◽  
Three Dimensional ◽  
Water Infiltration ◽  
Photonic Materials ◽  
Local Color ◽  
Water Contact ◽  
Color Changes

AbstractNot only does the Dynastes tityus beetle display a reversible color change controlled by differences in humidity, but also, the elytron scale can change color from yellow-green to deep-brown in specified shapes. The results obtained by focused ion beam-scanning electron microscopy (FIB-SEM), show that the epicuticle (EPI) is a permeable layer, and the exocuticle (EXO) is a three-dimensional photonic crystal. To investigate the mechanism of the reversible color change, experiments were conducted to determine the water contact angle, surface chemical composition, and optical reflectance, and the reflective spectrum was simulated. The water on the surface began to permeate into the elytron via the surface elemental composition and channels in the EPI. A structural unit (SU) in the EXO allows local color changes in varied shapes. The reflectance of both yellow-green and deep-brown elytra increases as the incidence angle increases from 0° to 60°. The microstructure and changes in the refractive index are the main factors that influence the process of reversible color change. According to the simulation, the lower reflectance causing the color change to deep-brown results from water infiltration, which increases light absorption. Meanwhile, the waxy layer has no effect on the reflection of light. This study lays the foundation to manufacture engineered photonic materials that undergo controllable changes in iridescent color.

scholarly journals Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2569
Author(s):  
Mia Kurek ◽  
Nasreddine Benbettaieb ◽  
Mario Ščetar ◽  
Eliot Chaudy ◽  
Maja Repajić ◽  
...  
Keyword(s):  
Food Packaging ◽  
Water Solubility ◽  
Color Change ◽  
Chitosan Film ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Color Changes ◽  
Insoluble Particles ◽  
Polymer Stability ◽  
Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

Sign in / Sign up

Export Citation Format

Share Document