scholarly journals Feasibility of Producing Core-Shell Filaments through Fused Filament Fabrication

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4253
Author(s):  
Alexandru Sover ◽  
Vasile Ermolai ◽  
Ashok M. Raichur ◽  
Romeo Ciobanu ◽  
Mihaela Aradoaei ◽  
...  
Keyword(s):  
Graphical Representation ◽  
Raw Material ◽  
Core Shell ◽  
3D Printer ◽  
Fused Filament Fabrication ◽  
Accessible Method ◽  
Blend Ratios ◽  
Main Effects ◽  
Material Mixing ◽  
Butadiene Styrene

Fused filament fabrication is a technology of additive manufacturing that uses molten thermoplastics for building parts. Due to the convenient shape of the raw material, a simple filament, the market offers a great variety of materials from simple to blends of compatible materials. However, finding a material with the desired properties can be difficult. Making it in-house or using a material manufacturer can be costly and time-consuming, especially when the optimum blend ratios are unknown or new design perspectives are tested. This paper presents an accessible method of producing core-shell filaments using material extrusion 3D printing. The printed filaments are characterised by a polycarbonate (PC) core and acryl butadiene styrene (ABS) shell with three material ratios. Their performance was investigated through printed samples. Additionally, the material mixing degree was studied by varying the extrusion temperature, nozzle feeding geometry, and layer thickness. The influence of all four factors was evaluated using a graphical representation of the main effects. The results showed that a core-shell filament can be processed using a 3D printer with a dual extrusion configuration and that the mechanical properties of the samples can be improved by varying the PC–ABS ratio. This research provides an accessible method for developing new hybrid filaments with a predesigned structure using a 3D printer.

scholarly journals Design of a Fused Filament Fabrication (FFF) 3D-printer

2021 ◽  
Vol 40 (2) ◽  
pp. 252-260
Author(s):  
A.O. Oluwajobi ◽  
F.O. Kolawole
Keyword(s):  
Fem Analysis ◽  
Acrylonitrile Butadiene Styrene ◽  
Galvanized Steel ◽  
Total Power ◽  
3D Printer ◽  
The Finite Element Method ◽  
Control Board ◽  
Fused Filament Fabrication ◽  
Precision Machines ◽  
Butadiene Styrene

A Fused Filament Fabrication (FFF) 3D-printer was designed, for fabrication by using in part locally sourced materials. The printer design was based on the Replicating Rapid Prototyper (RepRap) open source. The print volume of the printer is 200mm × 200mm × 300mm and it uses the Melzi V2 printer control board, coupled with the Repetier-Host firmware. The designed 3D-printer consists of galvanized steel frame, stainless steel threaded rods and wooded supports. The Finite Element Method (FEM) analysis was carried out on critical supporting components. The results obtained for the stresses are below the yield strength of the materials and the displacements are within acceptable limits, for high precision machines. The total power required by the 3D-printer was evaluated to be 197.93 W and it utilizes two thermoplastic materials namely; the Polylactic Acid (PLA) and the Acrylonitrile Butadiene Styrene (ABS).

Finite Element Analysis of a FDM 3D Printer Liquefier

2019 ◽  
Vol 820 ◽  
pp. 173-178
Author(s):  
Aissa Ouballouch ◽  
Rachid Elalaiji ◽  
Issam Ouahmane ◽  
Larbi Lasri ◽  
Mohammed Sallaou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Heat Dissipation ◽  
Acrylonitrile Butadiene Styrene ◽  
Raw Material ◽  
Heating Process ◽  
3D Printer ◽  
Element Analysis ◽  
Dissipation System ◽  
Butadiene Styrene

This paper deals with the analyzing and comparing the thermal performance of heat dissipation system and other components in the design of E3D liquefier using Finite Element Modeling (FEM) for three different filaments namely Polycaprolactone (PCL), polylactic acid (PLA) and Acrylonitrile Butadiene Styrene(ABS). This work evaluates the influence of airflow generated by means of a fan coupled to the extruder. The printable materials are also taken as variable in this investigation. The heating process should ensure the balance between proper heating of the material and controlling the temperature along the extruding body, so it reaches above 140 degrees in function of raw material on the tip of the nozzle and must be lower at the top of the liquefier for the correct perseveration of the 3D printer and its durability.

scholarly journals Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing

2021 ◽  
Author(s):  
Pawan Verma ◽  
Jabir Ubaid ◽  
Andreas Schiffer ◽  
Atul Jain ◽  
Emilio Martínez-Pañeda ◽  
...  
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Essential Work ◽  
Fused Filament Fabrication ◽  
Essential Work Of Fracture ◽  
Fracture Properties ◽  
Raster Angle ◽  
3D Printed ◽  
Printing Direction ◽  
Work Of Fracture ◽  
Butadiene Styrene

AbstractExperiments and finite element (FE) calculations were performed to study the raster angle–dependent fracture behaviour of acrylonitrile butadiene styrene (ABS) thermoplastic processed via fused filament fabrication (FFF) additive manufacturing (AM). The fracture properties of 3D-printed ABS were characterized based on the concept of essential work of fracture (EWF), utilizing double-edge-notched tension (DENT) specimens considering rectilinear infill patterns with different raster angles (0°, 90° and + 45/− 45°). The measurements showed that the resistance to fracture initiation of 3D-printed ABS specimens is substantially higher for the printing direction perpendicular to the crack plane (0° raster angle) as compared to that of the samples wherein the printing direction is parallel to the crack (90° raster angle), reporting EWF values of 7.24 kJ m−2 and 3.61 kJ m−2, respectively. A relatively high EWF value was also reported for the specimens with + 45/− 45° raster angle (7.40 kJ m−2). Strain field analysis performed via digital image correlation showed that connected plastic zones existed in the ligaments of the DENT specimens prior to the onset of fracture, and this was corroborated by SEM fractography which showed that fracture proceeded by a ductile mechanism involving void growth and coalescence followed by drawing and ductile tearing of fibrils. It was further shown that the raster angle–dependent strength and fracture properties of 3D-printed ABS can be predicted with an acceptable accuracy by a relatively simple FE model considering the anisotropic elasticity and failure properties of FFF specimens. The findings of this study offer guidelines for fracture-resistant design of AM-enabled thermoplastics. Graphical abstract

scholarly journals Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2521 ◽  
Author(s):  
Miquel Domingo-Espin ◽  
J. Antonio Travieso-Rodriguez ◽  
Ramon Jerez-Mesa ◽  
Jordi Lluma-Fuentes
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Experimental Phase ◽  
Fused Filament Fabrication ◽  
Layer Height ◽  
Bending Stresses ◽  
Best Parameter ◽  
End Use ◽  
Design And Manufacture ◽  
Printing Speed ◽  
Butadiene Styrene

In this paper, the fatigue response of fused filament fabrication (FFF) Acrylonitrile butadiene styrene (ABS) parts is studied. Different building parameters (layer height, nozzle diameter, infill density, and printing speed) were chosen to study their influence on the lifespan of cylindrical specimens according to a design of experiments (DOE) using the Taguchi methodology. The same DOE was applied on two different specimen sets using two different infill patterns—rectilinear and honeycomb. The results show that the infill density is the most important parameter for both of the studied patterns. The specimens manufactured with the honeycomb pattern show longer lifespans. The best parameter set associated to that infill was chosen for a second experimental phase, in which the specimens were tested under different maximum bending stresses so as to construct the Wöhler curve associated with this 3D printing configuration. The results of this study are useful to design and manufacture ABS end-use parts that are expected to work under oscillating periodic loads.

Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion

2018 ◽  
Vol 24 (2) ◽  
pp. 321-332 ◽  
Author(s):  
Joseph Bartolai ◽  
Timothy W. Simpson ◽  
Renxuan Xie
Keyword(s):  
Infrared Imaging ◽  
Acrylonitrile Butadiene Styrene ◽  
Temperature History ◽  
Interface Temperature ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Material Extrusion ◽  
Rheological Data ◽  
History Of ◽  
Butadiene Styrene

Purpose The weakest point in additively manufactured polymer parts produced by material extrusion additive manufacturing (MEAM) is the interface between adjacent layers and deposition toolpaths or “roads”. This study aims to predict the mechanical strength of parts by utilizing a novel analytical approach. Strength predictions are made using the temperature history of these interfaces, polymer rheological data, and polymer weld theory. Design/methodology/approach The approach is validated using experimental data for two common 3D-printed polymers: polycarbonate (PC) and acrylonitrile butadiene styrene (ABS). Interface temperature history data are collected in situ using infrared imaging. Rheological data of the polycarbonate and acrylonitrile butadiene styrene used to fabricate the fused filament fabrication parts in this study have been determined experimentally. Findings The strength of the interfaces has been predicted, to within 10% of experimental strength, using polymer weld theory from the literature adapted to the specific properties of the polycarbonate and acrylonitrile butadiene styrene feedstock used in this study. Originality/value This paper introduces a novel approach for predicting the strength of parts produced by MEAM based on the strength of interfaces using polymer weld theory, polymer rheology, temperature history of the interface and the forces applied to the interface. Unlike methods that require experimental strength data as a prediction input, the proposed approach is material and build orientation agnostic once fundamental parameters related to material composition have been determined.

scholarly journals Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes

2020 ◽  
Vol 12 (9) ◽  
pp. 3568 ◽  
Author(s):  
Nectarios Vidakis ◽  
Markos Petousis ◽  
Athena Maniadi ◽  
Emmanuel Koudoumas ◽  
Achilles Vairis ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Mechanical Behavior ◽  
Mechanical Response ◽  
Positive Impact ◽  
Research Work ◽  
Acrylonitrile Butadiene Styrene ◽  
Experimental Simulation ◽  
Recycling Rate ◽  
Fused Filament Fabrication ◽  
Butadiene Styrene

Sustainability in additive manufacturing refers mainly to the recycling rate of polymers and composites used in fused filament fabrication (FFF), which nowadays are rapidly increasing in volume and value. Recycling of such materials is mostly a thermomechanical process that modifies their overall mechanical behavior. The present research work focuses on the acrylonitrile-butadiene-styrene (ABS) polymer, which is the second most popular material used in FFF-3D printing. In order to investigate the effect of the recycling courses on the mechanical response of the ABS polymer, an experimental simulation of the recycling process that isolates the thermomechanical treatment from other parameters (i.e., contamination, ageing, etc.) has been performed. To quantify the effect of repeated recycling processes on the mechanic response of the ABS polymer, a wide variety of mechanical tests were conducted on FFF-printed specimens. Regarding this, standard tensile, compression, flexion, impact and micro-hardness tests were performed per recycle repetition. The findings prove that the mechanical response of the recycled ABS polymer is generally improved over the recycling repetitions for a certain number of repetitions. An optimum overall mechanical behavior is found between the third and the fifth repetition, indicating a significant positive impact of the ABS polymer recycling, besides the environmental one.

Experimental Investigation of PolyJet 3D Printing Process: Effects of Finish Type and Material Color on Color Appearance

2019 ◽  
Author(s):  
Xingjian Wei ◽  
Li Zeng ◽  
Zhijian Pei
Keyword(s):  
Experimental Investigation ◽  
3D Printing ◽  
Color Appearance ◽  
3D Printer ◽  
Printing Process ◽  
Full Color ◽  
Process Effects ◽  
Main Effects

Abstract The Stratasys J750 PolyJet printer is capable of printing full-color parts. However, little information is currently available about the effects of finish type and material color on color appearance of parts printed by the PolyJet process. In this study, the effects of finish type and material color on color appearance of PolyJet printed parts are investigated; two finish types (glossy and matte) and four material colors (cyan, magenta, yellow, and black) are considered. The results suggest that the main effects of finish type and its interactions with material color are significant. Especially, the effects of finish type when material color is black are more significant among the material colors. These results would be valuable to users of the full-color PolyJet 3D printer.

Sign in / Sign up

Export Citation Format

Share Document