scholarly journals The Potentiality of Rice Husk-Derived Activated Carbon: From Synthesis to Application

Processes ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 203 ◽  
Author(s):  
Md Masruck Alam ◽  
Md Ashraf Hossain ◽  
Md Delowar Hossain ◽  
M.A.H. Johir ◽  
Jewel Hossen ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Rice Husk ◽  
Organic Contaminants ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Industrial Applications ◽  
Catalytic Support ◽  
Energy Applications ◽  
Effective Synthesis

Activated carbon (AC) has been extensively utilized as an adsorbent over the past few decades. AC has widespread applications, including the removal of different contaminants from water and wastewater, and it is also being used in capacitors, battery electrodes, catalytic supports, and gas storage materials because of its specific characteristics e.g., high surface area with electrical properties. The production of AC from naturally occurring precursors (e.g., coal, biomass, coconut shell, sugarcane bagasse, and so on) is highly interesting in terms of the material applications in chemistry; however, recently much focus has been placed on the use of agricultural wastes (e.g., rice husk) to produce AC. Rice husk (RH) is an abundant as well as cheap material which can be converted into AC for various applications. Various pollutants such as textile dyes, organic contaminants, inorganic anions, pesticides, and heavy metals can be effectively removed by RH-derived AC. In addition, RH-derived AC has been applied in supercapacitors, electrodes for Li-ion batteries, catalytic support, and energy storage, among other uses. Cost-effective synthesis of AC can be an alternative for AC production. Therefore, this review mainly covers different synthetic routes and applications of AC produced from RH precursors. Different environmental, catalytic, and energy applications have been pinpointed. Furthermore, AC regeneration, desorption, and relevant environmental concerns have also been covered. Future scopes for further research and development activities are also discussed. Overall, it was found that RH-derived AC has great potential for different applications which can be further explored at real scales, i.e., for industrial applications in the future.

Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

Nanoscale ◽  
2021 ◽  
Author(s):  
Usama Zulfiqar ◽  
Nikolaos Kostoglou ◽  
Andrew Thomas ◽  
Claus Rebholz ◽  
Allan Matthews ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Organic Contaminants ◽  
High Surface ◽  
High Surface Area ◽  
Industrial Effluents ◽  
Self Assembled ◽  
Nanoporous Activated Carbon

This paper reports a study involving the formation of a self-assembled polymeric monolayer on the surface of a high surface area activated carbon to engineer its affinity towards organic contaminants....

scholarly journals Activated Carbon from Rice Husk Biochar with High Surface Area

2020 ◽  
Vol 11 (3) ◽  
pp. 10265-10277
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Rice Husk ◽  
Activated Carbons ◽  
Solid Phase ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Array Detector ◽  
Functional Density Theory

Activated carbons derived from rice husk pyrolysis (biochar) were prepared by chemical activation at different biochar/K2CO3 proportions in order to assess its capacity as adsorbent. The activated material was characterized by X-ray diffraction (DRX), Raman spectroscopy, scanning electron microscopy (SEM), the Brunauer, Emmet, and Teller (BET) method. The Barret, Joyner, and Halenda (BJH) method and functional density theory (DFT), presenting interesting texture properties, such as high surface area (BET 1850 m2 g-1) and microporosity, which allow its use as a sorbent phase in solid-phase extraction (SPE) of the main constituents of the aqueous pyrolysis phase. It was demonstrated that the activated carbon (RH-AC) adsorbs different compounds present in from rice husk pyrolysis wastewater through quantitative analysis by high-performance liquid chromatography with a diode-array detector (HPLC-DAD), presenting good linearity (R2 > 0.996) at 280 nm.

High surface area activated carbon from rice husk as a high performance supercapacitor electrode

2016 ◽  
Vol 192 ◽  
pp. 110-119 ◽  
Author(s):  
Ellie Yi Lih Teo ◽  
Lingeswarran Muniandy ◽  
Eng-Poh Ng ◽  
Farook Adam ◽  
Abdul Rahman Mohamed ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Rice Husk ◽  
High Performance ◽  
High Surface ◽  
High Surface Area ◽  
Supercapacitor Electrode

Cost Effective Synthesis and Fabrication of Phase-Pure Kesterite Cu2-xZn1.3SnS4 P-type Absorber Layer Thin Films by Solvent Based Process Technique for Photovoltaic Solar Energy Applications

2018 ◽  
Vol 7 (4) ◽  
pp. 36
Author(s):  
B. Khadambari ◽  
S. S. Bhattacharya
Keyword(s):  
Solar Energy ◽  
Renewable Energy Sources ◽  
Cost Effective ◽  
Absorber Layer ◽  
Window Layer ◽  
Energy Applications ◽  
Process Technique ◽  
Absorber Material ◽  
Effective Synthesis ◽  
P Type

Solar has become one of the fastest growing renewable energy sources. With the push towards sustainability it is an excellent solution to resolve the issue of our diminishing finite resources. Alternative photovoltaic systems are of much importance to utilize solar energy efficiently. The Cu-chalcopyrite compounds CuInS2 and CuInSe2 and their alloys provide absorber material of high absorption coefficients of the order of 105 cm-1. Cu2ZnSnS4 (CZTS) is more promising material for photovoltaic applications as Zn and Sn are abundant materials of earth’s crust. Further, the preparation of CZTS-ink facilitates the production of flexible solar cells. The device can be designed with Al doped ZnO as the front contact, n-type window layer (e.g. intrinsic ZnO); an n-type thin film buffer layer (e.g. CdS) and a p-type CZTS absorber layer with Molybdenum (Mo) substrate as back contact. In this study, CZTS films were synthesized by a non-vaccum solvent based process technique from a molecular-ink using a non toxic eco-friendly solvent dimethyl sulfoxide (DMSO). The deposited CZTS films were optimized and characterized by XRD, UV-visible spectroscopy and SEM.

Activated carbon from molasses efficiency for Cr(VI), Pb(II) and Cu(II) adsorption: A mechanistic study

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Sugar Industry ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Mechanistic Study ◽  
Acid Mixture ◽  
Maximum Adsorption Capacity ◽  
Good Potential

Activated carbon was prepared from molasses, which are natural precursors of vegetable origin resulting from the sugar industry. A simple elaboration process, based on chemical activation with phosphoric acid, was proposed. The final product, prepared by activation of molasses/phosphoric acid mixture in air at 500°C, presented high surface area (more than 1400 m2/g) and important maximum adsorption capacity for methylene blue (625 mg/g) and iodine (1660 mg/g). The activated carbon (MP2(500)) showed a good potential for the adsorption of Cr(VI), Cu(II) and Pb(II) from aqueous solutions. The affinity for the three ions was observed in the following order Cu2+ Cr6+ Pb2+. The process is governed by monolayer adsorption following the Langmuir model, with a correlation coefficient close to unity.

Removal of microcystin-LR from drinking water with TiO2-coated activated carbon

2004 ◽  
Vol 4 (5-6) ◽  
pp. 21-28
Author(s):  
S.-C. Kim ◽  
D.-K. Lee
Keyword(s):  
Drinking Water ◽  
Activated Carbon ◽  
Synergistic Effect ◽  
Fluidized Bed ◽  
Continuous Flow ◽  
High Surface ◽  
High Surface Area ◽  
Fluidized Bed Reactor ◽  
Exterior Surface ◽  
Tio2 Particles

TiO2-coated granular activated carbon was employed for the removal of toxic microcystin-LR from water. High surface area of the activated carbon provided sites for the adsorption of microcystin-LR, and the adsorbed microcystin-LR migrated continuously onto the surface of TiO2 particles which located mainly at the exterior surface in the vicinity of the entrances of the macropores of the activated carbon. The migrated microcystin-LR was finally degraded into nontoxic products and CO2 very quickly. These combined roles of the activated carbon and TiO2 showed a synergistic effect on the efficient degradation of toxic microcystin-LR. A continuous flow fluidized bed reactor with the TiO2-coated activated carbon could successfully be employed for the efficient photocatalytic of microcystin-LR.

scholarly journals Electrochemical Response of Glucose Oxidase Adsorbed on Laser-Induced Graphene

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1893
Author(s):  
Sónia O. Pereira ◽  
Nuno F. Santos ◽  
Alexandre F. Carvalho ◽  
António J. S. Fernandes ◽  
Florinda M. Costa
Keyword(s):  
Electron Transfer ◽  
Glucose Oxidase ◽  
Ph Dependence ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Great Promise ◽  
Glucose Detection ◽  
Half Wave ◽  
Electrochemical Transducers

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of −0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators.

scholarly journals Mesoporous Carbon: A Versatile Material for Scientific Applications

2021 ◽  
Vol 22 (9) ◽  
pp. 4498
Author(s):  
Md. Motiar Rahman ◽  
Mst Gulshan Ara ◽  
Mohammad Abdul Alim ◽  
Md. Sahab Uddin ◽  
Agnieszka Najda ◽  
...  
Keyword(s):  
Mesoporous Carbon ◽  
Oral Drug Delivery ◽  
High Surface ◽  
High Surface Area ◽  
Oral Drug ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Catalytic Support ◽  
Scientific Disciplines ◽  
Oral Drug Delivery System

Mesoporous carbon is a promising material having multiple applications. It can act as a catalytic support and can be used in energy storage devices. Moreover, mesoporous carbon controls body’s oral drug delivery system and adsorb poisonous metal from water and various other molecules from an aqueous solution. The accuracy and improved activity of the carbon materials depend on some parameters. The recent breakthrough in the synthesis of mesoporous carbon, with high surface area, large pore-volume, and good thermostability, improves its activity manifold in performing functions. Considering the promising application of mesoporous carbon, it should be broadly illustrated in the literature. This review summarizes the potential application of mesoporous carbon in many scientific disciplines. Moreover, the outlook for further improvement of mesoporous carbon has been demonstrated in detail. Hopefully, it would act as a reference guidebook for researchers about the putative application of mesoporous carbon in multidimensional fields.

Sign in / Sign up

Export Citation Format

Share Document