Comparison of the Accelerated and Spontaneous Deactivation of the HDS Catalyst

Owing to the increased use of secondary materials for diesel production, refineries must confront bad quality parameters. Therefore, catalysts with certain capabilities (to remove heteroatoms and improve quality parameters at low hydrogen consumption) and their lifetimes are required. An important parameter that influences the quality of the products and the economy of the unit is the activity of the catalyst. Prior to industrial use, the catalyst is typically tested in a pilot unit. This is necessary to obtain a considerable amount of data on the lifetime of the catalyst in the shortest feasible time. Here, deactivation steps were used to test the catalyst. Two experiments were performed to evaluate the effect of two types of accelerated deactivations on the catalyst activity and product properties. The first type of deactivation proceeded for 6 h and comprised a tripling of the amount of incoming feedstock, and the second type proceeded for 18 h without an increase in the amount of feedstock. For both cases, the pressure and hydrogen flow were minimised. Both types of accelerated deactivations had similar effects on the quality of the final products and catalyst. The only difference was in the duration of catalyst recovery after deactivation. The results were compared with those of a test in which the spontaneous deactivation of the catalyst was studied.