scholarly journals Monitoring 10-m LST from the Combination MODIS/Sentinel-2, Validation in a High Contrast Semi-Arid Agroecosystem

2020 ◽  
Vol 12 (9) ◽  
pp. 1453
Author(s):  
Juan M. Sánchez ◽  
Joan M. Galve ◽  
José González-Piqueras ◽  
Ramón López-Urrea ◽  
Raquel Niclòs ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Land Surface ◽  
Near Infrared ◽  
Estimation Error ◽  
Vegetation Indices ◽  
Model Performance ◽  
Test Site ◽  
Spatio Temporal ◽  
Average Estimation Error ◽  
Sentinel 2

Downscaling techniques offer a solution to the lack of high-resolution satellite Thermal InfraRed (TIR) data and can bridge the gap until operational TIR missions accomplishing spatio-temporal requirements are available. These techniques are generally based on the Visible Near InfraRed (VNIR)-TIR variable relations at a coarse spatial resolution, and the assumption that the relationship between spectral bands is independent of the spatial resolution. In this work, we adopted a previous downscaling method and introduced some adjustments to the original formulation to improve the model performance. Maps of Land Surface Temperature (LST) with 10-m spatial resolution were obtained as output from the combination of MODIS/Sentinel-2 images. An experiment was conducted in an agricultural area located in the Barrax test site, Spain (39°03′35″ N, 2°06′ W), for the summer of 2018. Ground measurements of LST transects collocated with the MODIS overpasses were used for a robust local validation of the downscaling approach. Data from 6 different dates were available, covering a variety of croplands and surface conditions, with LST values ranging 300–325 K. Differences within ±4.0 K were observed between measured and modeled temperatures, with an average estimation error of ±2.2 K and a systematic deviation of 0.2 K for the full ground dataset. A further cross-validation of the disaggregated 10-m LST products was conducted using an additional set of Landsat-7/ETM+ images. A similar uncertainty of ±2.0 K was obtained as an average. These results are encouraging for the adaptation of this methodology to the tandem Sentinel-3/Sentinel-2, and are promising since the 10-m pixel size, together with the 3–5 days revisit frequency of Sentinel-2 satellites can fulfill the LST input requirements of the surface energy balance methods for a variety of hydrological, climatological or agricultural applications. However, certain limitations to capture the variability of extreme LST, or in recently sprinkler irrigated fields, claim the necessity to explore the implementation of soil moisture or vegetation indices sensitive to soil water content as inputs in the downscaling approach. The ground LST dataset introduced in this paper will be of great value for further refinements and assessments.

scholarly journals Evaluation of TsHARP Utility for Thermal Sharpening of Sentinel-3 Satellite Images Using Sentinel-2 Visual Imagery

2019 ◽  
Vol 11 (19) ◽  
pp. 2304 ◽  
Author(s):  
Hanna Huryna ◽  
Yafit Cohen ◽  
Arnon Karnieli ◽  
Natalya Panov ◽  
William P. Kustas ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Land Surface ◽  
Near Infrared ◽  
Landsat 8 ◽  
Large Area ◽  
Primary Methods ◽  
Thermal Images ◽  
Spatially Distributed ◽  
The Difference ◽  
Sentinel 2

A spatially distributed land surface temperature is important for many studies. The recent launch of the Sentinel satellite programs paves the way for an abundance of opportunities for both large area and long-term investigations. However, the spatial resolution of Sentinel-3 thermal images is not suitable for monitoring small fragmented fields. Thermal sharpening is one of the primary methods used to obtain thermal images at finer spatial resolution at a daily revisit time. In the current study, the utility of the TsHARP method to sharpen the low resolution of Sentinel-3 thermal data was examined using Sentinel-2 visible-near infrared imagery. Compared to Landsat 8 fine thermal images, the sharpening resulted in mean absolute errors of ~1 °C, with errors increasing as the difference between the native and the target resolutions increases. Part of the error is attributed to the discrepancy between the thermal images acquired by the two platforms. Further research is due to test additional sites and conditions, and potentially additional sharpening methods, applied to the Sentinel platforms.

scholarly journals ASSESSING CROP MONITORING POTENTIAL OF SENTINEL-2 IN A SPATIO-TEMPORAL SCALE

2018 ◽  
Vol XLII-5 ◽  
pp. 227-231 ◽  
Author(s):  
P. Ghosh ◽  
D. Mandal ◽  
A. Bhattacharya ◽  
M. K. Nanda ◽  
S. Bera
Keyword(s):  
Spatial Resolution ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Vegetation Indices ◽  
Crop Growth ◽  
Crop Monitoring ◽  
Red Edge ◽  
Plant Area Index ◽  
Spatio Temporal ◽  
Sentinel 2

<p><strong>Abstract.</strong> Spatio-temporal variability of crop growth descriptors is of prime importance for crop risk assessment and yield gap analysis. The incorporation of three bands (viz., B5, B6, B7) in ‘red-edge’ position (i.e., 705<span class="thinspace"></span>nm, 740<span class="thinspace"></span>nm, 783<span class="thinspace"></span>nm) in Sentinel-2 with 10&amp;ndash;20<span class="thinspace"></span>m spatial resolution images with five days revisit period have unfolded opportunity for meticulous crop monitoring. In the present study, the potential of Sentinel-2 have been appraised for monitoring phenological stages of potato over Bardhaman district in the state of West Bengal, India. Due to the competency of Vegetation indices (VI) to evaluate the status of crop growth; we have used the Normalized Difference Vegetation Index (NDVI), the Green Normalized Difference Vegetation Index (GNDVI), and the Normalized Difference Index45 (NDI45) for crop monitoring. Time series analysis of the VIs exhibited increasing trend as the crop started approaching maturity and attained a maximum value during the tuber development stage and started decreasing as the crop advances to senescence. Inter-field variability of VIs highlighted the need of crop monitoring at high spatial resolution. Among the three vegetation indices, the GNDVI (<i>r</i><span class="thinspace"></span>=<span class="thinspace"></span>0.636), NDVI (<i>r</i><span class="thinspace"></span>=<span class="thinspace"></span>0.620) had the highest correlation with biomass and Plant Area Index (PAI), respectively. NDI45 had comparatively a lower correlation (<i>r</i><span class="thinspace"></span>=<span class="thinspace"></span>0.572 and 0.585 for PAI and biomass, respectively) with both parameters as compared to other two indices. It is interesting to note that the use of Sentinel-2 Green band (B3) instead of the Red band (B4) in GNDVI resulted in 2.5% increase of correlation with biomass. However, the improvement in correlations between NDI45 with crop biophysical parameters is not apparent in this particular study with the inclusion of the Vegetation Red Edge band (B5) in VI. Nevertheless, the strong correlation of VIs with biomass and PAI asserted proficiency of Sentinel-2 for crop monitoring and potential for crop biophysical parameter retrieval with optimum accuracy.</p>

scholarly journals Assessing Leaf Biomass of Agave sisalana Using Sentinel-2 Vegetation Indices

2021 ◽  
Vol 13 (2) ◽  
pp. 233
Author(s):  
Ilja Vuorinne ◽  
Janne Heiskanen ◽  
Petri K. E. Pellikka
Keyword(s):  
Near Infrared ◽  
Vegetation Indices ◽  
Fibre Production ◽  
Additive Models ◽  
Leaf Biomass ◽  
Ground Vegetation ◽  
Perennial Crop ◽  
Red Edge ◽  
Agave Sisalana ◽  
Sentinel 2

Biomass is a principal variable in crop monitoring and management and in assessing carbon cycling. Remote sensing combined with field measurements can be used to estimate biomass over large areas. This study assessed leaf biomass of Agave sisalana (sisal), a perennial crop whose leaves are grown for fibre production in tropical and subtropical regions. Furthermore, the residue from fibre production can be used to produce bioenergy through anaerobic digestion. First, biomass was estimated for 58 field plots using an allometric approach. Then, Sentinel-2 multispectral satellite imagery was used to model biomass in an 8851-ha plantation in semi-arid south-eastern Kenya. Generalised Additive Models were employed to explore how well biomass was explained by various spectral vegetation indices (VIs). The highest performance (explained deviance = 76%, RMSE = 5.15 Mg ha−1) was achieved with ratio and normalised difference VIs based on the green (R560), red-edge (R740 and R783), and near-infrared (R865) spectral bands. Heterogeneity of ground vegetation and resulting background effects seemed to limit model performance. The best performing VI (R740/R783) was used to predict plantation biomass that ranged from 0 to 46.7 Mg ha−1 (mean biomass 10.6 Mg ha−1). The modelling showed that multispectral data are suitable for assessing sisal leaf biomass at the plantation level and in individual blocks. Although these results demonstrate the value of Sentinel-2 red-edge bands at 20-m resolution, the difference from the best model based on green and near-infrared bands at 10-m resolution was rather small.

scholarly journals Coseismic displacements of the 14 November 2016 Mw7.8 Kaikoura, New Zealand, earthquake using an optical cubesat constellation

2017 ◽  
Author(s):  
Andreas Kääb ◽  
Bas Altena ◽  
Joseph Mascaro
Keyword(s):  
New Zealand ◽  
Land Surface ◽  
Near Infrared ◽  
Sar Interferometry ◽  
Optical Methods ◽  
Optical Data ◽  
Surface Displacements ◽  
Before And After ◽  
Optical Satellite Images ◽  
Sentinel 2

Abstract. Satellite measurements of coseismic displacements are typically based on Synthetic Aperture Radar (SAR) interferometry or amplitude tracking, or based on optical data such as from Landsat, Sentinel-2, SPOT, ASTER, very-high resolution satellites, or airphotos. Here, we evaluate a new class of optical satellite images for this purpose – data from cubesats. More specific, we investigate the PlanetScope cubesat constellation for horizontal surface displacements by the 14 November 2016 Mw7.8 Kaikoura, New Zealand, earthquake. Single PlanetScope scenes are 2–4 m resolution visible and near-infrared frame images of approximately 20–30 km × 9–15 km in size, acquired in continuous sequence along an orbit of approximately 375–475 km height. From single scenes or mosaics from before and after the earthquake we observe surface displacements of up to almost 10 m and estimate a matching accuracy from PlanetScope data of up to ±0.2 pixels (~ ±0.6 m). This accuracy, the daily revisit anticipated for the PlanetScope constellation for the entire land surface of Earth, and a number of other features, together offer new possibilities for investigating coseismic and other Earth surface displacements and managing related hazards and disasters, and complement existing SAR and optical methods. For comparison and for a better regional overview we also match the coseismic displacements by the 2016 Kaikoura earthquake using Landsat8 and Sentinel-2 data.

scholarly journals Use of multi-spectral visible and near-infrared satellite data for timely estimates of the Earth's surface reflectance in cloudy conditions: Part 2 - image restoration with HICO satellite data in overcast conditions

2021 ◽  
Author(s):  
Joanna Joiner ◽  
Zachary Fasnacht ◽  
Bo-Cai Gao ◽  
Wenhan Qin
Keyword(s):  
Spatial Resolution ◽  
Satellite Data ◽  
Precision Agriculture ◽  
Land Surface ◽  
Near Infrared ◽  
Infrared Imaging ◽  
Space Station ◽  
Water Quality Assessment ◽  
Low Contrast

Satellite-based visible and near-infrared imaging of the Earth's surface is generally not performed in moderate to highly cloudy conditions; images that look visibly cloud covered to the human eye are typically discarded. Here, we expand upon previous work that employed machine learning (ML) to estimate underlying land surface reflectances at red, green, and blue (RGB) wavelengths in cloud contaminated spectra using a low spatial resolution satellite spectrometer. Specifically, we apply the ML methodology to a case study at much higher spatial resolution with the Hyperspectral Imager for the Coastal Ocean (HICO) that flew on the International Space Station (ISS). HICO spatial sampling is of the order of 90 m. The purpose of our case study is to test whether high spatial resolution features can be captured using multi-spectral imaging in lightly cloudy and overcast conditions. We selected one clear and one cloudy image over a portion ofthe panhandle coastline of Florida to demonstrate that land features are partially recoverable in overcast conditions. Many high contrast features are well recovered in the presence of optically thin clouds. However, some of the low contrast features, such as narrow roads, are smeared out in the heavily clouded part of the reconstructed image. This case study demonstrates that our approach may be useful for many science and applications that are being developed for current and upcoming satellite missions including precision agriculture and natural vegetation analysis, water quality assessment as well as disturbance, change, hazard, and disaster detection.

Hyperspectral remote sensing monitoring of cyanobacteria blooms in a large South American reservoir: high- and medium-spatial resolution satellite algorithm simulation

2020 ◽  
Vol 71 (5) ◽  
pp. 593 ◽  
Author(s):  
A. Drozd ◽  
P. de Tezanos Pinto ◽  
V. Fernández ◽  
M. Bazzalo ◽  
F. Bordet ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Spatial Resolution ◽  
Near Infrared ◽  
Monitoring Program ◽  
Hyperspectral Remote Sensing ◽  
Coefficient Of Determination ◽  
South American ◽  
Cell Abundance ◽  
Hyperspectral Signatures ◽  
Sentinel 2

We used hyperspectral remote sensing with the aim of establishing a monitoring program for cyanobacteria in a South American reservoir. We sampled at a wide temporal (2012–16; 10 seasons) and spatial (30km) gradient, and retrieved 111 field hyperspectral signatures, chlorophyll-a, cyanobacteria densities and total suspended solids. The hyperspectral signatures for cyanobacteria-dominated situations (n=75) were used to select the most suitable spectral bands in seven high- and medium-spatial resolution satellites (Sentinel 2, Landsat 5, 7 and 8, SPOT-4/5 and -6/7, WorldView 2), and for the development of chlorophyll and cyanobacteria cell abundance algorithms (λ550 – λ650+λ800) ÷ (λ550+λ650+λ800). The best-performing chlorophyll algorithm was Sentinel 2 ((λ560 – λ660+λ703) ÷ (λ560+λ660+λ703); R2=0.80), followed by WorldView 2 ((λ550 – λ660+λ720) ÷ (λ550+λ660+λ720); R2=0.78), Landsat and the SPOT series ((λ550 – λ650+λ800) ÷ (λ550+λ650+λ800); R2=0.67–0.74). When these models were run for cyanobacteria abundance, the coefficient of determination remained similar, but the root mean square error increased. This could affect the estimate of cyanobacteria cell abundance by ~20%, yet it still enable assessment of the alert level categories for risk assessment. The results of this study highlight the importance of the red and near-infrared region for identifying cyanobacteria in hypereutrophic waters, demonstrating coherence with field cyanobacteria abundance and enabling assessment of bloom distribution in this ecosystem.

Cosmic Ray Neutron Sensing: Integration with land surface modelling using data assimilation for improved field-scale soil moisture estimates

2020 ◽  
Author(s):  
Amol Patil ◽  
Benjamin Fersch ◽  
Harrie-Jan Hendricks-Franssen ◽  
Harald Kunstmann
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Spatial Resolution ◽  
Land Surface ◽  
Root Zone ◽  
Cosmic Ray ◽  
Soil Parameters ◽  
Surface Model ◽  
Field Scale ◽  
Spatio Temporal

&lt;p&gt;Soil moisture is a key variable in atmospheric modelling to resolve the partitioning of net radiation into sensible and latent heat fluxes. Therefore, high resolution spatio-temporal soil moisture estimation is getting growing attention in this decade. The recent developments to observe soil moisture at field scale (170 to 250 m spatial resolution) using Cosmic Ray Neutron Sensing (CRNS) technique has created new opportunities to better resolve land surface atmospheric interactions; however, many challenges remain such as spatial resolution mismatch and estimation uncertainties. Our study couples the Noah-MP land surface model to the Data Assimilation Research Testbed (DART) for assimilating CRN intensities to update model soil moisture. For evaluation, the spatially distributed Noah-MP was set up to simulate the land surface variables at 1 km horizontal resolution for the Rott and Ammer catchments in southern Germany. The study site comprises the TERENO-preAlpine observatory with five CRNS stations and additional CRNS measurements for summer 2019 operated by our Cosmic Sense research group. We adjusted the soil parametrization in Noah-MP to allow the usage of EU soil data along with Mualem-van Genuchten soil hydraulic parameters. We use independent observations from extensive soil moisture sensor network (SoilNet) within the vicinity of CRNS sensors for validation. Our detailed synthetic and real data experiments are evaluated for the analysis of the spatio-temporal changes in updated root zone soil moisture and for implications on the energy balance component of Noah-MP. Furthermore, we present possibilities to estimate root zone soil parameters within the data assimilation framework to enhance standalone model performance.&lt;/p&gt;

scholarly journals BEECH TREE DENSITY ESTIMATION USING SENTINEL-2 DATA (CASE STUDY: KHYROUD FOREST)

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 891-895
Author(s):  
G. Ronoud ◽  
A. A. Darvish Sefat ◽  
P. Fatehi
Keyword(s):  
Density Estimation ◽  
Vegetation Indices ◽  
Model Performance ◽  
Field Measurements ◽  
Tree Density ◽  
Spectral Bands ◽  
Tasseled Cap Transformation ◽  
Beech Tree ◽  
Remote Sensing Techniques ◽  
Sentinel 2

Abstract. Obtaining information about forest attributes is essential for planning, monitoring, and management of forests. Due to the time and cost consuming of Tree Density (TD) using field measurements especially in the vast and remote areas, remote sensing techniques have gained more attention in scientific community. Khyroud forest, a part of Hyrcanian forest of Iran, with a high species biodiversity and growing volume stock plays an important role in carbon storage. The aim of this study was to assess the capability of Sentinel-2 data for estimating the tree density in the Khyroud forest. 65 square sample plots with an area of 2025 m2 were measured. In each sample plot, trees with diameter at the breast height (DBH) higher than 7.5-cm were recorded. The quality of Sentinel-2 data in terms of geometric correction and cloud effect were investigated. Different processing approaches such as vegetation indices and Tasseled Cap transformation on spectral bands in combination with an empirical approach were implemented. Also, some of biophysical variables were computed. To assess the model performance, the data were randomly divided into parts, 70% of sample plots were used for modelling and 30% for validation. The results showed that the SVR algorithm (linear kernel) with a relative RMSE of 23.09% and a R2 of 0.526 gained the highest performance for tree density estimation.

Bayesian Spatio-temporal Geostatistics-based Method for Multiple Satellite Products Fusion and Downscaling

2020 ◽  
Author(s):  
Yanchen Bo
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Spatial Resolution ◽  
Land Surface ◽  
Satellite Remote Sensing ◽  
Hydrological Cycle ◽  
Microwave Remote Sensing ◽  
Earth Surface ◽  
Spatio Temporal ◽  
High Level

&lt;p&gt;High-level satellite remote sensing products of Earth surface play an irreplaceable role in global climate change, hydrological cycle modeling and water resources management, environment monitoring and assessment. Earth surface high-level remote sensing products released by NASA, ESA and other agencies are routinely derived from any single remote sensor. Due to the cloud contamination and limitations of retrieval algorithms, the remote sensing products derived from single remote senor are suspected to the incompleteness, low accuracy and less consistency in space and time. Some land surface remote sensing products, such as soil moisture products derived from passive microwave remote sensing data have too coarse spatial resolution to be applied at local scale. Fusion and downscaling is an effective way of improving the quality of satellite remote sensing products.&lt;/p&gt;&lt;p&gt;We developed a Bayesian spatio-temporal geostatistics-based framework for multiple remote sensing products fusion and downscaling. Compared to the existing methods, the presented method has 2 major advantages. The first is that the method was developed in the Bayesian paradigm, so the uncertainties of the multiple remote sensing products being fused or downscaled could be quantified and explicitly expressed in the fusion and downscaling algorithms. The second advantage is that the spatio-temporal autocorrelation is exploited in the fusion approach so that more complete products could be produced by geostatistical estimation.&lt;/p&gt;&lt;p&gt;This method has been applied to the fusion of multiple satellite AOD products, multiple satellite SST products, multiple satellite LST products and downscaling of 25 km spatial resolution soil moisture products. The results were evaluated in both spatio-temporal completeness and accuracy.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document