scholarly journals Geometric Parameter Calibration for a Cable-Driven Parallel Robot Based on a Single One-Dimensional Laser Distance Sensor Measurement and Experimental Modeling

Sensors ◽  
2018 ◽  
Vol 18 (7) ◽  
pp. 2392 ◽  
Author(s):  
XueJun Jin ◽  
Jinwoo Jung ◽  
Seong Ko ◽  
Eunpyo Choi ◽  
Jong-Oh Park ◽  
...  
Keyword(s):  
Position Control ◽  
Uncertainty Modeling ◽  
Parallel Robot ◽  
Parallel Robots ◽  
The Body ◽  
Robot Kinematics ◽  
Kinematic Parameters ◽  
Body Frame ◽  
Geometric Uncertainty ◽  
Calibration Methods

A cable-driven parallel robot has benefits of wide workspace, high payload, and high dynamic response owing to its light cable actuator utilization. For wide workspace applications, in particular, the body frame becomes large to cover the wide workspace that causes robot kinematic errors resulting from geometric uncertainty. However, appropriate sensors as well as inexpensive and easy calibration methods to measure the actual robot kinematic parameters are not currently available. Hence, we present a calibration sensor device and an auto-calibration methodology for the over-constrained cable-driven parallel robots using one-dimension laser distance sensors attached to the robot end-effector, to overcome the robot geometric uncertainty and to implement precise robot control. A novel calibration workflow with five phases—preparation, modeling, measuring, identification, and adjustment—is proposed. The proposed calibration algorithms cover the cable-driven parallel robot kinematics, as well as uncertainty modeling such as cable elongation and pulley kinematics. We performed extensive simulations and experiments to verify the performance of the suggested method using the MINI cable robot. The experimental results show that the kinematic parameters can be identified correctly with 0.92 mm accuracy, and the robot position control accuracy is increased by 58%. Finally, we verified that the developed calibration sensor devices and the calibration methodology are applicable to the massive-size cable-driven parallel robot system.

Nonlinear dynamics of flexible links in planar parallel robots using a new beam element

2020 ◽  
Vol 26 (7-8) ◽  
pp. 475-489
Author(s):  
Mahdi Sharifnia
Keyword(s):  
Slope Angle ◽  
Main Idea ◽  
Parallel Robot ◽  
Beam Element ◽  
Parallel Robots ◽  
The Body ◽  
Inverse Dynamic ◽  
Two Parameters ◽  
Euler Bernoulli Beam ◽  
Similar Elements

In the present research, a previously presented beam element in planar static problems is extended to planar dynamic problems. As investigated in the previous work of the author, formulation of the presented Euler–Bernoulli beam element is simpler and the beam element more efficient than similar elements in large deflection problems. In the present element, the main idea is estimating the dimensions of the body in the deformed configuration, instead of estimating its absolute or relative positions. Therefore, two parameters, the length and slope angle of the beam centroid curve, are selected to be estimated by interpolating polynomials. To verify the efficiency of the element, obtained results for the flexible pendulum are compared with previous works. Because of the simple and efficient formulation of the element, it can be efficiently used for dynamic analysis of planar flexible linkages, and especially in flexible parallel robots, which are the main aims of the present research. Finally, the inverse dynamic of the flexible 3-RRR parallel robot is presented.

DELTA: a simple and efficient parallel robot

Robotica ◽  
1990 ◽  
Vol 8 (2) ◽  
pp. 105-109 ◽  
Author(s):  
F. Pierrot ◽  
C. Reynaud ◽  
A. Fournier
Keyword(s):  
Inverse Kinematics ◽  
Research Team ◽  
Dynamic Models ◽  
Inverse Dynamics ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Kinematic Parameters ◽  
Mechanical Structure ◽  
Serial Robots ◽  
École Polytechnique

SummaryThe DELTA parallel robot, designed by an EPFL (Ecole Polytechnique Fédérale de Lausanne) research team, is a mechanical structure which has the advantage of parallel robots and ease of serial robots modeling. This paper presents solutions for a complete modeling of the DELTA parallel robot (direct and inverse kinematics, inverse statics, inverse dynamics), with few arithmetic and trigonometric operations. Our method is based on a satisfactory choice of kinematic parameters and on a few restricting hypotheses for the static and dynamic models. We give some details of each model, we present some computation results and we put the emphasis on some particular points, showing the capabilities of this mechanical structure.

Parallel Robot Calibration Utilizing Adaptronic Joints

2008 ◽  
Author(s):  
Philipp Last ◽  
Annika Raatz ◽  
Ju¨rgen Hesselbach ◽  
Nenad Pavlovic ◽  
Ralf Keimer
Keyword(s):  
Parallel Robot ◽  
Parallel Robots ◽  
Machine Component ◽  
Robot Calibration ◽  
Geometric Calibration ◽  
Self Calibration ◽  
Mechanical Constraints ◽  
Special Machine ◽  
Calibration Methods ◽  
Calibration Techniques

Model based geometric calibration is well known to be an efficient way to enhance absolute accuracy of robotic systems. Generally its application requires redundant measurements, which are achieved by external metrology equipment in most traditional calibration techniques. However, these methods are usually time-consuming, expensive and inconvenient. Thus, so-called self-calibration methods have achieved attention from researchers, which either use internal sensors or rely on mechanical constraints instead. In this paper a new self-calibration technique is presented for parallel robots which is motivated by the idea of constrained calibration. The new approach utilizes a special machine component called the adaptronic swivel joint in order to achieve the required redundant information. Compared to similar approaches it offers several advantages. The new calibration scheme is described and verified in simulation studies using a RRRRR-structure as an example.

Kinematic Analysis of a Five-Legged Mobile Robot

2010 ◽  
Author(s):  
Muhammed R. Pac ◽  
Dan O. Popa
Keyword(s):  
Kinematic Analysis ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Parallel Robots ◽  
The Body ◽  
Legged Robots ◽  
Upper Body ◽  
Design Changes ◽  
Robot Performance ◽  
The Impact

Legged robots are more maneuverable, and can negotiate rough terrain much better than conventional locomotion using wheels. However, since the kinematic or dynamic analysis of such robots involves closed chains, it is typically more difficult to investigate the impact of design changes, such as the number, or the design of its legs, to robot performance. Most legged robots consist of 4 legs (quadrupeds) or 6 legs (hexapods). This paper discusses the kinematic analysis of an unconventional, symmetrical 5-legged robot with 2-DOF (Degrees Of Freedom) universal joints in each leg. The analysis was carried out in order to predict the mobility of the upper body platform, and investigate the number of robot actuators needed for mobility. The product of exponentials formulation with respect to the local coordinate frames is used to describe the twists of the joints. The analysis is based on the idea that the robot body platform along with the legs can be considered instantaneously as a parallel robot manipulating the ground. Hence, the analysis can be done using the Jacobian formulation of parallel robots. Simulation results confirm the mobility analysis that the robot can have at most 3-DOF for the body and that these freedoms are coupled rotations and translations in 3D space also with a dependence on the configuration of the robot.

scholarly journals Modeling Parallel Robot Kinematics for 3T2R and 3T3R Tasks Using Reciprocal Sets of Euler Angles

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 68 ◽  
Author(s):  
Moritz Schappler ◽  
Svenja Tappe ◽  
Tobias Ortmaier
Keyword(s):  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Robot Kinematics ◽  
Euler Angles ◽  
Gradient Descent Algorithm ◽  
Kinematic Models ◽  
Rotational Degrees Of Freedom ◽  
Definition Of

Industrial manipulators and parallel robots are often used for tasks, such as drilling or milling, that require three translational, but only two rotational degrees of freedom (“3T2R”). While kinematic models for specific mechanisms for these tasks exist, a general kinematic model for parallel robots is still missing. This paper presents the definition of the rotational component of kinematic constraints equations for parallel robots based on two reciprocal sets of Euler angles for the end-effector orientation and the orientation residual. The method allows completely removing the redundant coordinate in 3T2R tasks and to solve the inverse kinematics for general serial and parallel robots with the gradient descent algorithm. The functional redundancy of robots with full mobility is exploited using nullspace projection.

A Simulation Study of a Planar Cable-Driven Parallel Robot to Transport Supplies for Patients with Contagious Diseases in Health Care Centers

Robotics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 111
Author(s):  
Marco Carpio ◽  
Roque Saltaren ◽  
Julio Viola ◽  
Cecilia García ◽  
Juan Guerra ◽  
...  
Keyword(s):  
Position Control ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Pid Controllers ◽  
End Effector ◽  
Movement Trajectories ◽  
Contagious Diseases ◽  
Ultraviolet C ◽  
Design Proposal ◽  
Health Care Centers

Currently, a large number of investigations are being carried out in the area of robotics focused on proposing solutions in the field of health, and many of them have directed their efforts on issues related to the health emergency due to COVID-19. Considering that one of the ways to reduce the risk of contagion is by avoiding contact and closeness between people when exchanging supplies such as food, medicine, clothing, etc., this work proposes the use of a planar cable-driven parallel robot for the transport of supplies in hospitals whose room distribution has planar architecture. The robot acts in accordance with a procedure proposed for each task to be carried out, which includes the process of disinfection (based on Ultraviolet-C light) of the supplies transported inside the robot’s end effector. The study presents a design proposal for the geometry of the planar cable-driven parallel robots and its end effector, as well as the software simulations that allow evaluating the robot’s movement trajectories and the responses of the position control system based on Fuzzy-PID controllers.

Vision-based calibration of a Hexa parallel robot

2014 ◽  
Vol 41 (3) ◽  
pp. 296-310 ◽  
Author(s):  
Mehdi Dehghani ◽  
Mahdi Ahmadi ◽  
Alireza Khayatian ◽  
Mohamad Eghtesad ◽  
Mehran Yazdi
Keyword(s):  
Parallel Robot ◽  
Calibration Procedure ◽  
Experimental Results ◽  
Kinematic Calibration ◽  
Kinematic Parameters ◽  
Laptop Computer ◽  
Positioning Accuracy ◽  
Content Type ◽  
Calibration Methods ◽  
Usb Camera

Purpose – The purpose of this paper is to present a vision-based method for the kinematic calibration of a six-degrees-of-freedom parallel robot named Hexa using only one Universal Serial Bus (USB) camera and a chess pattern installed on the robot's mobile platform. Such an approach avoids using any internal sensors or complex three-dimensional measurement systems to obtain the pose (position/orientation) of the robot's end-effector or the joint coordinates. Design/methodology/approach – The setup of the proposed method is very simple; only one USB camera connected to a laptop computer is needed and no contact with the robot is necessary during the calibration procedure. For camera modeling, a pinhole model is used; it is then modified by considering some distortion coefficients. Intrinsic and extrinsic parameters and the distortion coefficients are found by an offline minimization algorithm. The chess pattern makes image corner detection very straightforward; this detection leads to finding the camera and then the kinematic parameters. To carry out the calibration procedure, several trajectories are run (the results of two of them are presented here) and sufficient specifications of the poses (positions/orientations) are calculated to find the kinematic parameters of the robot. Experimental results obtained when applying the calibration procedure on a Hexa parallel robot show that vision-based kinematic calibration yields enhanced and efficient positioning accuracy. After successful calibration and addition of an appropriate control scheme, the robot has been considered as a color-painting prototype robot to serve in relevant industries. Findings – Experimental results obtained when applying the calibration procedure on a Hexa parallel robot show that vision-based kinematic calibration yields enhanced and efficient positioning accuracy. Originality/value – The enhanced results show the advantages of this method in comparison with the previous calibration methods.

scholarly journals Kinematics and workspace analysis of 4SPRR-SPR parallel robots

PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0239150
Author(s):  
Lan Luo ◽  
Li Hou ◽  
Qi Zhang ◽  
Yongqiao Wei ◽  
Yang Wu
Keyword(s):  
Search Algorithm ◽  
Weight Ratio ◽  
Parallel Robot ◽  
Parallel Robots ◽  
Robot Kinematics ◽  
Locally Linear Embedding ◽  
Self Organizing Map ◽  
Boundary Extraction ◽  
Workspace Analysis ◽  
Extraction Algorithm

The 4SPRR-SPR parallel robot, which has considerable potential for application in the field of machining, is a novel closed-loop mechanism with a high rigid-weight ratio. Kinematics and workspace analyses of the 4SPRR-SPR parallel robot are key requirements for its application in machining. In this study, the inverse kinematics of the 4SPRR-SPR parallel robot is analyzed using a geometric method based on the mechanism arrangement of the robot. The forward kinematics model is derived by training the vector-quantified temporal associative memory (VQTAM) network, which originates from a self-organizing map (SOM). Furthermore, an improved algorithm is obtained by combining the locally linear embedding (LLE) and VQTAM methods. A boundary extraction algorithm for the workspace analysis of the parallel robot is proposed. The performance of the boundary extraction algorithm is analyzed and compared with that of a global search algorithm; the result indicates that the novel algorithm has the same computational accuracy in addition to higher efficiency. The workspace of the 4SPRR-SPR parallel robot is analyzed using the boundary extraction algorithm. Finally, the 3D model of the 4SPRR-SPR parallel robot is simulated using the ADAMS software to verify the reliability of the proposed algorithms. The simulation results demonstrate the effectiveness of the methods proposed in this study. In addition, the robot kinematics and workspace analysis methods described herein can be extended to other serial and parallel robots. This research provides a theoretical framework for trajectory planning of mechanisms, workspace optimization of robots, and robotic control.

scholarly journals Proposal of a Decoupled Structure of Fuzzy-PID Controllers Applied to the Position Control in a Planar CDPR

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 745
Author(s):  
Marco Carpio ◽  
Roque Saltaren ◽  
Julio Viola ◽  
Cristian Calderon ◽  
Juan Guerra
Keyword(s):  
Position Control ◽  
Control Structure ◽  
Parallel Robot ◽  
Pid Controllers ◽  
Fuzzy Pid ◽  
End Effector ◽  
Robot Systems ◽  
Decoupled Control ◽  
The Mathematical Model ◽  
Decoupled Structure

The design of robot systems controlled by cables can be relatively difficult when it is approached from the mathematical model of the mechanism, considering that its approach involves non-linearities associated with different components, such as cables and pulleys. In this work, a simple and practical decoupled control structure proposal that requires practically no mathematical analysis was developed for the position control of a planar cable-driven parallel robot (CDPR). This structure was implemented using non-linear fuzzy PID and classic PID controllers, allowing performance comparisons to be established. For the development of this research, first the structure of the control system was proposed, based on an analysis of the cables involved in the movement of the end-effector (EE) of the robot when they act independently for each axis. Then a tuning of rules was carried out for fuzzy PID controllers, and Ziegler–Nichols tuning was applied to classic PID controllers. Finally, simulations were performed in MATLAB with the Simulink and Simscape tools. The results obtained allowed us to observe the effectiveness of the proposed structure, with noticeably better performance obtained from the fuzzy PID controllers.

Leg Lift During Non-Overconstrained Pseudo-Static Walking

1996 ◽  
Author(s):  
Chee K. Foo ◽  
Eugene F. Fichter ◽  
Becky L. Fichter
Keyword(s):  
Position Control ◽  
The Body ◽  
Degree Of Freedom ◽  
Walking Machine

Abstract A non-overconstrained pseudo-static walking machine has 1 leg joint under position control for every degree-of-freedom of the body. When 1 joint is position controlled on each of 6 legs, leg lift during a step results in 1 unregulated degree-of-freedom of the body. A second joint in one of the 5 legs that maintain contact with the ground must be switched to active position control at the same time that a foot is lifted. In theory any passively controlled joint in the 5 supporting legs may be chosen. However the requirement that no leg be in tension and practical limits on torques available from joint actuators severely restrict choice of both additional joint to actively position control and possible body positions where legs can be lifted.

Sign in / Sign up

Export Citation Format

Share Document