scholarly journals Classification and Identification of Industrial Gases Based on Electronic Nose Technology

Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 5033 ◽  
Author(s):  
Li ◽  
Luo ◽  
Sun ◽  
GholamHosseini
Keyword(s):  
Discriminant Analysis ◽  
Electronic Nose ◽  
Recognition Rate ◽  
Principal Component ◽  
Kernel Discriminant Analysis ◽  
Linear Discriminant ◽  
Detection And Identification ◽  
Industrial Gases ◽  
Gas Identification ◽  
The One

Rapid detection and identification of industrial gases is a challenging problem. They have a complex composition and different specifications. This paper presents a method based on the kernel discriminant analysis (KDA) algorithm to identify industrial gases. The smell prints of four typical industrial gases were collected by an electronic nose. The extracted features of the collected gases were employed for gas identification using different classification algorithms, including principal component analysis (PCA), linear discriminant analysis (LDA), PCA + LDA, and KDA. In order to obtain better classification results, we reduced the dimensions of the original high-dimensional data, and chose a good classifier. The KDA algorithm provided a high classification accuracy of 100% by selecting the offset of the kernel function c = 10 and the degree of freedom d = 5. It was found that this accuracy was 4.17% higher than the one obtained using PCA. In the case of standard deviation, the KDA algorithm has the highest recognition rate and the least time consumption.

scholarly journals Development of a Piezoelectric-Based Odor Reproduction System

Electronics ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 870
Author(s):  
Tengteng Wen ◽  
Dehan Luo ◽  
Yongjie Ji ◽  
Pingzhong Zhong
Keyword(s):  
Principal Component Analysis ◽  
Discriminant Analysis ◽  
Linear Discriminant Analysis ◽  
Electronic Nose ◽  
Principal Component ◽  
Component Analysis ◽  
Piezoelectric Transducers ◽  
Linear Discriminant ◽  
Reproduction System ◽  
Machine Olfaction

Odor reproduction, a branch of machine olfaction, is a technology through which a machine represents various odors by blending several odor sources in different proportions and releases them. In this paper, an odor reproduction system is proposed. The system includes an atomization-based odor dispenser using 16 micro-porous piezoelectric transducers. The authors propose the use of an electronic nose combined with a Principal Component Analysis–Linear Discriminant Analysis (PCA–LDA) model to evaluate the effectiveness of the system. The results indicate that the model can be used to evaluate the system.

Evaluation of Chinese Vinegar by Electronic Nose

2014 ◽  
Vol 490-491 ◽  
pp. 1497-1502
Author(s):  
Ming Quan Huang ◽  
Jing Lin Zhang ◽  
Ji Hong Wu ◽  
Bao Guo Sun ◽  
Yu Yu Zhang ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Discriminant Analysis ◽  
Electronic Nose ◽  
Principal Component ◽  
Linear Discriminant ◽  
Production Area ◽  
Production Areas ◽  
Sulfur Containing ◽  
Chinese Vinegar ◽  
Sulfur Containing Compounds

Twelve vinegars from different production areas in China were evaluated by the Portable Electronic Nose 3 (PEN3), and the data detected by PEN3 were analyzed by principal component analysis (PCA), linear discriminant analysis (LDA) and loadings analysis (LA). The results of PCA and LDA all showed that the electronic nose could clearly discriminate the vinegars of difference production areas, but had very little discrimination on same production area vinegars. The results of LD showed that these sensors, including W1S, W2S, W5S, W2W, W1W, W5C, were appropriate to evaluate and compare the aroma of vinegars, especially W1S, W2S, W5S. Loadings analysis also indicated that these compounds in twelve vinegars had great differences, such as acids, esters, alcohols, alkanes, while aromatics compounds, sulfur-containing compounds and alkenes had some distinctions.

scholarly journals ELECTRONIC NOSE FOR ANCHOVY FRESHNESS MONITORING BASED ON SENSOR ARRAY AND PATTERN RECOGNITION METHODS: PRINCIPAL COMPONENTS ANALYSIS, LINEAR DISCRIMINANT ANALYSIS AND SUPPORT VECTOR MACHINE

2014 ◽  
pp. 61-67
Author(s):  
A. Amari ◽  
N. El Bari ◽  
B. Bouchikhi
Keyword(s):  
Support Vector Machine ◽  
Discriminant Analysis ◽  
Linear Discriminant Analysis ◽  
Electronic Nose ◽  
Tin Dioxide ◽  
Principal Component ◽  
Support Vector ◽  
Current Pattern ◽  
Linear Discriminant ◽  
Pattern Recognition Methods

An electronic nose based system, which employs an array of six inexpensive commercial gas sensors based on tin dioxide (Figaro Engineering Inc., Japan), has been used to analyse the freshness states of anchovies. Fresh anchovies were stored in a refrigerator at 4 ± 1°C over a period of 15 days. Electronic nose measurements need no sample preparation and the results indicated that the spoilage process of anchovies could be followed by using this technique. Conductance responses of volatile compounds produced during storage of anchovy were monitored and the result were analysed by multivariate analysis methods. In this paper principal component analysis (PCA) and linear discriminant analysis (LDA) were used to investigate whether the electronic nose was able to distinguishing among different freshness states (fresh, moderated and non-fresh samples). The loadings analysis was used to identify the sensors responsible for discrimination in the current pattern file. Therefore, the support vector machines (SVM) method was applied to the new subset, with only the selected sensors, to confirm that a subset of a few sensors can be chosen to explain all the variance. The results obtained prove that the electronic nose can discriminate successfully different freshness state using LDA analysis. Some sensors have the highest influence in the current pattern file for electronic nose. Support vector machine (SVM) model, applied to the new subset of sensors show the good performance.

scholarly journals A fast and low-cost approach to quality control of alcohol-based hand sanitizer using portable near infrared spectrometer and chemometrics

2021 ◽  
pp. 096703352098731
Author(s):  
Adenilton C da Silva ◽  
Lívia PD Ribeiro ◽  
Ruth MB Vidal ◽  
Wladiana O Matos ◽  
Gisele S Lopes
Keyword(s):  
Quality Control ◽  
Discriminant Analysis ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Principal Component ◽  
Partial Least Square ◽  
Least Square ◽  
Chemical Components ◽  
Linear Discriminant ◽  
Hand Sanitizer

The use of alcohol-based hand sanitizers is recommended as one of several strategies to minimize contamination and spread of the COVID-19 disease. Current reports suggest that the virucidal potential of ethanol occurs at concentrations close to 70%. Traditional methods of verifying the ethanol concentration in such products invite potential errors due to the viscosity of chemical components or may be prohibitively expensive to undertake in large demand. Near infrared (NIR) spectroscopy and chemometrics have already been used for the determination of ethanol in other matrices and present an alternative fast and reliable approach to quality control of alcohol-based hand sanitizers. In this study, a portable NIR spectrometer combined with classification chemometric tools, i.e., partial least square discriminant analysis (PLS–DA) and linear discriminant analysis with successive algorithm projection (SPA–LDA) were used to construct models to identify conforming and non-conforming commercial and laboratory synthesized hand sanitizer samples. Principal component analysis (PCA) was applied in an exploratory data study. Three principal components accounted for 99% of data variance and demonstrate clustering of conforming and non-conforming samples. The PLS–DA and SPA–LDA classification models presented 77 and 100% of accuracy in cross/internal validation respectively and 100% of accuracy in the classification of test samples. A total of 43% commercial samples evaluated using the PLS–DA and SPA–LDA presented ethanol content non-conforming for hand sanitizer gel. These results indicate that use of NIR spectroscopy and chemometrics is a promising strategy, yielding a method that is fast, portable, and reliable for discrimination of alcohol-based hand sanitizers with respect to conforming and non-conforming ethanol concentrations.

scholarly journals Discrimination between Alternative Herbal Medicines from Different Categories with the Electronic Nose

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2936 ◽  
Author(s):  
Xianghao Zhan ◽  
Xiaoqing Guan ◽  
Rumeng Wu ◽  
Zhan Wang ◽  
You Wang ◽  
...  
Keyword(s):  
Herbal Medicine ◽  
Electronic Nose ◽  
Nearest Neighbor ◽  
Herbal Medicines ◽  
Principal Component ◽  
Support Vector ◽  
Linear Discriminant ◽  
Convenient Means ◽  
Electronic Nose System ◽  
Insight Into

As alternative herbal medicine gains soar in popularity around the world, it is necessary to apply a fast and convenient means for classifying and evaluating herbal medicines. In this work, an electronic nose system with seven classification algorithms is used to discriminate between 12 categories of herbal medicines. The results show that these herbal medicines can be successfully classified, with support vector machine (SVM) and linear discriminant analysis (LDA) outperforming other algorithms in terms of accuracy. When principal component analysis (PCA) is used to lower the number of dimensions, the time cost for classification can be reduced while the data is visualized. Afterwards, conformal predictions based on 1NN (1-Nearest Neighbor) and 3NN (3-Nearest Neighbor) (CP-1NN and CP-3NN) are introduced. CP-1NN and CP-3NN provide additional, yet significant and reliable, information by giving the confidence and credibility associated with each prediction without sacrificing of accuracy. This research provides insight into the construction of a herbal medicine flavor library and gives methods and reference for future works.

scholarly journals Determination of HPLC-UV Fingerprints of Spanish Paprika (Capsicum annuum L.) for Its Classification by Linear Discriminant Analysis

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4479 ◽  
Author(s):  
Xavier Cetó ◽  
Núria Serrano ◽  
Miriam Aragó ◽  
Alejandro Gámez ◽  
Miquel Esteban ◽  
...  
Keyword(s):  
Discriminant Analysis ◽  
Linear Discriminant Analysis ◽  
Principal Component ◽  
Reversed Phase ◽  
Classification Rate ◽  
Phenolic Profile ◽  
Linear Discriminant ◽  
Sample Extraction

The development of a simple HPLC-UV method towards the evaluation of Spanish paprika’s phenolic profile and their discrimination based on the former is reported herein. The approach is based on C18 reversed-phase chromatography to generate characteristic fingerprints, in combination with linear discriminant analysis (LDA) to achieve their classification. To this aim, chromatographic conditions were optimized so as to achieve the separation of major phenolic compounds already identified in paprika. Paprika samples were subjected to a sample extraction stage by sonication and centrifugation; extracting procedure and conditions were optimized to maximize the generation of enough discriminant fingerprints. Finally, chromatograms were baseline corrected, compressed employing fast Fourier transform (FFT), and then analyzed by means of principal component analysis (PCA) and LDA to carry out the classification of paprika samples. Under the developed procedure, a total of 96 paprika samples were analyzed, achieving a classification rate of 100% for the test subset (n = 25).

2D Image Matrix-Based Discriminator

2006 ◽  
pp. 258-286
Author(s):  
David Zhang ◽  
Xiao-Yuan Jing ◽  
Jian Yang
Keyword(s):  
Principal Component Analysis ◽  
Discriminant Analysis ◽  
Linear Discriminant Analysis ◽  
Principal Component ◽  
Component Analysis ◽  
Two Dimensional ◽  
Fisher Linear Discriminant ◽  
Linear Discriminant ◽  
Image Projection ◽  
Projection Techniques

This chapter presents two straightforward image projection techniques — two-dimensional (2D) image matrix-based principal component analysis (IMPCA, 2DPCA) and 2D image matrix-based Fisher linear discriminant analysis (IMLDA, 2DLDA). After a brief introduction, we first introduce IMPCA. Then IMLDA technology is given. As a result, we summarize some useful conclusions.

scholarly journals Discriminant Analysis of Traditional Chinese Medicinal Properties Based on Holistic Chemical Profiling by 1H-NMR Spectrometry

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Jie Zhang ◽  
Wenna Guo ◽  
Qiao Li ◽  
Faxin Sun ◽  
Xiaomeng Xu ◽  
...  
Keyword(s):  
Discriminant Analysis ◽  
Chinese Medicine ◽  
Principal Component ◽  
Linear Discriminant ◽  
Chemical Profiling ◽  
H Nmr ◽  
Nmr Spectrometry ◽  
Cinnamomi Cortex ◽  
Medicinal Properties ◽  
Leave One Out

Medicinal property, which is closely related to drug chemical profiling, is the essence of traditional Chinese medicine (TCM) theory and has always been the focus of modern Chinese medicine. Based on dozens of classic and commonly used TCM herbs with recognized medicinal properties, the present study just aimed to investigate the feasibility and reliability of medicinal property discriminant by using 1H-NMR spectrometry, which provided a mass of spectral data showing holistic chemical profile for multivariate analysis and data mining, including principal component analysis (PCA), Fisher linear discriminant analysis (FLDA), and canonical discriminant analysis (CDA). By using FLDA for two-class recognition, a large majority of test herbs (59/61) were properly discriminated as cold or hot group, and the only two exceptions were Chuanbeimu (Fritillariae Cirrhosae Bulbus) and Rougui (Cinnamomi Cortex), suggesting that medicinal properties interrelate with flavor and body tropism, and all these factors together bring up medicinal property and efficacy. While by performing CDA, 98.4% of the original grouped herbs and 77.0% of the leave-one-out cross-validated grouped cases were correctly classified. The findings demonstrated that discriminant analysis based on holistic chemical profiling data by 1H-NMR spectrometry may provide a powerful alternative to have a deeper understanding of TCM medicinal property.

Sign in / Sign up

Export Citation Format

Share Document