scholarly journals Smart Control and Energy Efficiency in Irrigation Systems Using LoRaWAN

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7041
Author(s):  
Francisco Sánchez-Sutil ◽  
Antonio Cano-Ortega
Keyword(s):  
Electrical Energy ◽  
Control Device ◽  
Area Network ◽  
Wide Area Network ◽  
Irrigation Systems ◽  
Electronic Board ◽  
Smart Control ◽  
Measurement Devices ◽  
Large Irrigation ◽  
Control And Monitoring System

Irrigation installations in cities or agricultural operations use large amounts of water and electrical energy in their activity. Therefore, optimising these resources is essential nowadays. Wireless networks offer ideal support for such applications. The long-range wide-area network (LoRaWAN) used in this research offers a large coverage of up to 5 km, has low power consumption and does not need additional hardware such as repeaters or signal amplifiers. This research develops a control and monitoring system for irrigation systems. For this purpose, an irrigation algorithm is designed that uses rainfall probability data to regulate the irrigation of the installation. The algorithm is complemented by checking the sending and receiving of information in the LoRa network to reduce the loss of information packets. In addition, two temperature and humidity measurement devices for LoRaWAN (THMDLs) and an electrovalve control device for LoRaWAN (ECDLs) were developed. The hardware and software were also designed, and prototypes were built with the development of the electronic board. The wide coverage of the LoRaWAN allows the covering of small to large irrigation areas.

scholarly journals LPWAN-based hybrid backhaul communication for intelligent transportation systems: architecture and performance evaluation

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Taghi Shahgholi ◽  
Amir Sheikhahmadi ◽  
Keyhan Khamforoosh ◽  
Sadoon Azizi
Keyword(s):  
Low Power ◽  
Intelligent Transportation Systems ◽  
Intelligent Transportation System ◽  
Road Traffic ◽  
Intelligent Transportation ◽  
Traffic Monitoring ◽  
Transportation Systems ◽  
Area Network ◽  
Emergency Vehicle ◽  
Wide Area Network

AbstractIncreased number of the vehicles on the streets around the world has led to several problems including traffic congestion, emissions, and huge fuel consumption in many regions. With advances in wireless and traffic technologies, the Intelligent Transportation System (ITS) has been introduced as a viable solution for solving these problems by implementing more efficient use of the current infrastructures. In this paper, the possibility of using cellular-based Low-Power Wide-Area Network (LPWAN) communications, LTE-M and NB-IoT, for ITS applications has been investigated. LTE-M and NB-IoT are designed to provide long range, low power and low cost communication infrastructures and can be a promising option which has the potential to be employed immediately in real systems. In this paper, we have proposed an architecture to employ the LPWAN as a backhaul infrastructure for ITS and to understand the feasibility of the proposed model, two applications with low and high delay requirements have been examined: road traffic monitoring and emergency vehicle management. Then, the performance of using LTE-M and NB-IoT for providing backhaul communication infrastructure has been evaluated in a realistic simulation environment and compared for these two scenarios in terms of end-to-end latency per user. Simulation of Urban MObility has been used for realistic traffic generation and a Python-based program has been developed for evaluation of the communication system. The simulation results demonstrate the feasibility of using LPWAN for ITS backhaul infrastructure mostly in favor of the LTE-M over NB-IoT.

scholarly journals A Long-Distance Communication Architecture for Medical Devices Based on LoRaWAN Protocol

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 940
Author(s):  
Nicoleta Cristina Gaitan
Keyword(s):  
Energy Consumption ◽  
Long Range ◽  
Medical Devices ◽  
Low Energy ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
Communication Architecture ◽  
Low Energy Consumption ◽  
Distance Communication

Recent market studies show that the market for remote monitoring devices of different medical parameters will grow exponentially. Globally, more than 4 million individuals will be monitored remotely from the perspective of different health parameters by 2023. Of particular importance is the way of remote transmission of the information acquired from the medical sensors. At this time, there are several methods such as Bluetooth, WI-FI, or other wireless communication interfaces. Recently, the communication based on LoRa (Long Range) technology has had an explosive development that allows the transmission of information over long distances with low energy consumption. The implementation of the IoT (Internet of Things) applications using LoRa devices based on open Long Range Wide-Area Network (LoRaWAN) protocol for long distances with low energy consumption can also be used in the medical field. Therefore, in this paper, we proposed and developed a long-distance communication architecture for medical devices based on the LoRaWAN protocol that allows data communications over a distance of more than 10 km.

scholarly journals Comparison of LPWAN Technologies: Cost Structure and Scalability

2021 ◽  
Author(s):  
Mohammad Istiak Hossain ◽  
Jan I. Markendahl
Keyword(s):  
Communication Technology ◽  
Service Providers ◽  
Communication Technologies ◽  
Cost Structure ◽  
Small Scale ◽  
Area Network ◽  
Wide Area Network ◽  
Generic Framework ◽  
Cost Efficient ◽  
The Cost

AbstractSmall-scale commercial rollouts of Cellular-IoT (C-IoT) networks have started globally since last year. However, among the plethora of low power wide area network (LPWAN) technologies, the cost-effectiveness of C-IoT is not certain for IoT service providers, small and greenfield operators. Today, there is no known public framework for the feasibility analysis of IoT communication technologies. Hence, this paper first presents a generic framework to assess the cost structure of cellular and non-cellular LPWAN technologies. Then, we applied the framework in eight deployment scenarios to analyze the prospect of LPWAN technologies like Sigfox, LoRaWAN, NB-IoT, LTE-M, and EC-GSM. We consider the inter-technology interference impact on LoRaWAN and Sigfox scalability. Our results validate that a large rollout with a single technology is not cost-efficient. Also, our analysis suggests the rollout possibility of an IoT communication Technology may not be linear to cost-efficiency.

scholarly journals Smart Monitoring and Controlling of Appliances Using LoRa Based IoT System

Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Nur-A-Alam ◽  
Mominul Ahsan ◽  
Md. Abdul Based ◽  
Julfikar Haider ◽  
Eduardo M. G. Rodrigues
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Modular Design ◽  
Real Life ◽  
Environmental Data ◽  
Automation System ◽  
Area Network ◽  
Wide Area Network ◽  
Long Distance ◽  
At Home

In the era of Industry 4.0, remote monitoring and controlling appliance/equipment at home, institute, or industry from a long distance with low power consumption remains challenging. At present, some smart phones are being actively used to control appliances at home or institute using Internet of Things (IoT) systems. This paper presents a novel smart automation system using long range (LoRa) technology. The proposed LoRa based system consists of wireless communication system and different types of sensors, operated by a smart phone application and powered by a low-power battery, with an operating range of 3–12 km distance. The system established a connection between an android phone and a microprocessor (ESP32) through Wi-Fi at the sender end. The ESP32 module was connected to a LoRa module. At the receiver end, an ESP32 module and LoRa module without Wi-Fi was employed. Wide Area Network (WAN) communication protocol was used on the LoRa module to provide switching functionality of the targeted area. The performance of the system was evaluated by three real-life case studies through measuring environmental temperature and humidity, detecting fire, and controlling the switching functionality of appliances. Obtaining correct environmental data, fire detection with 90% accuracy, and switching functionality with 92.33% accuracy at a distance up to 12 km demonstrated the high performance of the system. The proposed smart system with modular design proved to be highly effective in controlling and monitoring home appliances from a longer distance with relatively lower power consumption.

scholarly journals An Autonomous Low-Power LoRa-Based Flood-Monitoring System

2020 ◽  
Vol 10 (2) ◽  
pp. 15 ◽  
Author(s):  
Mattia Ragnoli ◽  
Gianluca Barile ◽  
Alfiero Leoni ◽  
Giuseppe Ferri ◽  
Vincenzo Stornelli
Keyword(s):  
Low Power ◽  
Monitoring System ◽  
Area Network ◽  
Test Results ◽  
Wide Area Network ◽  
Web Structure ◽  
Flood Monitoring ◽  
Node Architecture ◽  
Different Types ◽  
Wireless Module

The development of Internet of Things (IoT) systems is a rapidly evolving scenario, thanks also to newly available low-power wide area network (LPWAN) technologies that are utilized for environmental monitoring purposes and to prevent potentially dangerous situations with smaller and less expensive physical structures. This paper presents the design, implementation and test results of a flood-monitoring system based on LoRa technology, tested in a real-world scenario. The entire system is designed in a modular perspective, in order to have the capability to interface different types of sensors without the need for making significant hardware changes to the proposed node architecture. The information is stored through a device equipped with sensors and a microcontroller, connected to a LoRa wireless module for sending data, which are then processed and stored through a web structure where the alarm function is implemented in case of flooding.

Sign in / Sign up

Export Citation Format

Share Document