scholarly journals Comparative Whole Building Life Cycle Assessment of Energy Saving and Carbon Reduction Performance of Reinforced Concrete and Timber Stadiums—A Case Study in China

2020 ◽  
Vol 12 (4) ◽  
pp. 1566 ◽  
Author(s):  
Yu Dong ◽  
Tongyu Qin ◽  
Siyuan Zhou ◽  
Lu Huang ◽  
Rui Bo ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Reinforced Concrete ◽  
Energy Saving ◽  
Carbon Emissions ◽  
Building Materials ◽  
Energy Use ◽  
Rc Buildings ◽  
Carbon Reduction ◽  
The Government

Many stadiums will be built in China in the next few decades due to increasing public interest in physical exercise and the incentive policies issued by the government under its National Fitness Program. This paper investigates the energy saving and carbon reduction performance of timber stadiums in China in comparison with stadiums constructed using conventional building materials, based on both life cycle energy assessment (LCEA) and life cycle carbon assessment (LCCA). The authors select five representative cities in five climate zones in China as the simulation environment, simulate energy use in the operation phase of stadiums constructed from reinforced concrete (RC) and timber, and compare the RC and timber stadiums in terms of their life cycle energy consumption and carbon emissions. The LCEA results reveal that the energy saving potential afforded by timber stadiums is 11.05%, 12.14%, 8.15%, 4.61% and 4.62% lower than those of RC buildings in “severely cold,” “cold,” “hot summer, cold winter,” “hot summer, warm winter,” and “temperate” regions, respectively. The LCCA results demonstrate that the carbon emissions of timber stadiums are 15.85%, 15.86%, 18.88%, 19.22% and 22.47% lower than those of RC buildings for the regions above, respectively. This demonstrates that in China, timber stadiums have better energy conservation and carbon reduction potential than RC stadiums, based on life cycle assessment. Thus, policy makers are advised to encourage the promotion of timber stadiums in China to achieve the goal of sustainable energy development for public buildings.

scholarly journals Digital Twin Aided Sustainability and Vulnerability Audit for Subway Stations

2020 ◽  
Vol 12 (19) ◽  
pp. 7873 ◽  
Author(s):  
Sakdirat Kaewunruen ◽  
Shijie Peng ◽  
Olisa Phil-Ebosie
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Carbon Emissions ◽  
Building Materials ◽  
Information Model ◽  
Subway Station ◽  
Digital Twin ◽  
Subway Stations ◽  
The Cost

Digital twin (DT) or so-called ‘building information model (BIM)’ has brought great revolution to the current building industry. Its applications to life cycle management of buildings and infrastructures can further increase the social and economic benefits. As a complete information model, a digital twin integrates the information of a project from different stages of the life cycle into a model, in order to facilitate better asset management and communicate through data visualizations with participants. This paper unprecedently introduces a digital-twin aided life cycle assessment to evaluate a subway station. Dadongmen subway station in Hefei was used as a case study. This new study benchmarks the cost estimation and carbon emission at each life cycle stage of the project. The cost in the construction stage of the project is the highest, accounting for 78% of the total cost. However, the amount of carbon emissions in the operation and maintenance is higher than the amount during the production of building materials, accounting for 67%. Among them, concrete only accounts for 43.66% of the carbon emissions of building materials, even though concrete was mainly used for constructing the metro station. Steel bar and aluminum alloy have carbon emissions of 29.73% and 17.64%, respectively. In addition, emerging risks of the subway stations can be identified. The digital twin has been used to illustrate vulnerability and potential solutions to emerging risks, and to assess the suitability through life cycle cost and carbon footprint. This initiative is relatively new to the industry. The new insight into life cycle assessment or LCA (especially carbon footprint over the life cycle) integrated with digital twin applications will enable sustainable development that will enhance resilience of metro railway systems globally.

scholarly journals A two family house built to passive house standard in the north of Sweden: environmental system performance

2017 ◽  
Author(s):  
Jonas Jonasson ◽  
Itai Danielski ◽  
Michelle Svensson ◽  
Morgan Fröling
Keyword(s):  
Energy Efficiency ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Building Materials ◽  
Energy Use ◽  
Residential Building ◽  
Building Design ◽  
Energy System ◽  
Northern Sweden ◽  
Passive House

A life cycle assessment (LCA) of a low energy / passive house in northern Sweden, including building materials and energy use is reported. The case study building is semi detached house for two families situated in Östersund (lat. 63°N), Sweden. Each apartment having a floor space of 160 m2 divided on two floors. The building was constructed during 2010 with a design meeting the requirements for Swedish passive houses as defined by the Forum for energy efficiency buildings (FEBY) and the Swedish center for zero energy houses (SCNH). When it comes to more sustainable buildings, energy use in the build environment has been in focus for some time. The life cycle assessment in this study reveals that the building materials can contribute significantly to environmental burdens of a residential building in northern Sweden. Energy efficiency, efficient use of good building materials and issues of appropriate design need to be discussed in the same context to move toward a more sustainable built environment. For energy efficient buildings in a energy system with renewably based energy carriers, building materials might give rise to a significant or even dominating part of the life cycle impact of a building. This give rise to considerations regarding choices of building materials as well as design of buildings to minimize such impact; while not forgetting social aspects impacted by building design.

scholarly journals Life Cycle Assessment of Building Renovation Measures–Trade-off between Building Materials and Energy

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 344 ◽  
Author(s):  
Ricardo Ramírez-Villegas ◽  
Ola Eriksson ◽  
Thomas Olofsson
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Building Materials ◽  
Energy Use ◽  
Ventilation System ◽  
Cold Climate ◽  
Solar Irradiation ◽  
The European Union ◽  
Building Stock

The scope of this study is to assess how different energy efficient renovation strategies affect the environmental impacts of a multi-family house in a Nordic climate within district heating systems. The European Union has set ambitious targets to reduce energy use and greenhouse gas emissions by the year 2030. There is special attention on reducing the life cycle emissions in the buildings sector. However, the focus has often been on new buildings, although existing buildings represent great potential within the building stock in Europe. In this study, four different renovation scenarios were analyzed with the commercially available life cycle assessment software that follows the European Committee for Standardization (CEN) standard. This study covers all life cycle steps from the cradle to the grave for a residential building in Borlänge, Sweden, where renewable energy dominates. The four scenarios included reduced indoor temperature, improved thermal properties of building material components and heat recovery for the ventilation system. One finding is that changing installations gives an environmental impact comparable to renovations that include both ventilation and building facilities. In addition, the life cycle steps that have the greatest environmental impact in all scenarios are the operational energy use and the building and installation processes. Renovation measures had a major impact on energy use due to the cold climate and low solar irradiation in the heating season. An interesting aspect, however, is that the building materials and the construction processes gave a significant amount of environmental impact.

scholarly journals Carbon Emission Estimation of Assembled Composite Concrete Beams during Construction

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1810
Author(s):  
Kaitong Xu ◽  
Haibo Kang ◽  
Wei Wang ◽  
Ping Jiang ◽  
Na Li
Keyword(s):  
Life Cycle ◽  
Carbon Emissions ◽  
Emission Reduction ◽  
Carbon Emission ◽  
Composite Beams ◽  
Total Carbon ◽  
Construction Process ◽  
Low Carbon ◽  
Carbon Emission Reduction ◽  
The Government

At present, the issue of carbon emissions from buildings has become a hot topic, and carbon emission reduction is also becoming a political and economic contest for countries. As a result, the government and researchers have gradually begun to attach great importance to the industrialization of low-carbon and energy-saving buildings. The rise of prefabricated buildings has promoted a major transformation of the construction methods in the construction industry, which is conducive to reducing the consumption of resources and energy, and of great significance in promoting the low-carbon emission reduction of industrial buildings. This article mainly studies the calculation model for carbon emissions of the three-stage life cycle of component production, logistics transportation, and on-site installation in the whole construction process of composite beams for prefabricated buildings. The construction of CG-2 composite beams in Fujian province, China, was taken as the example. Based on the life cycle assessment method, carbon emissions from the actual construction process of composite beams were evaluated, and that generated by the composite beam components during the transportation stage by using diesel, gasoline, and electric energy consumption methods were compared in detail. The results show that (1) the carbon emissions generated by composite beams during the production stage were relatively high, accounting for 80.8% of the total carbon emissions, while during the transport stage and installation stage, they only accounted for 7.6% and 11.6%, respectively; and (2) during the transportation stage with three different energy-consuming trucks, the carbon emissions from diesel fuel trucks were higher, reaching 186.05 kg, followed by gasoline trucks, which generated about 115.68 kg; electric trucks produced the lowest, only 12.24 kg.

scholarly journals A scalable and spatiotemporally resolved agricultural life cycle assessment of California almonds

2021 ◽  
Author(s):  
Elias Marvinney ◽  
Alissa Kendall
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Supply ◽  
Energy Use ◽  
Energy Intensity ◽  
Central Valley ◽  
San Joaquin Valley ◽  
Impact Categories ◽  
Freshwater Use ◽  
California's Central Valley

Abstract Purpose California’s Central Valley produces more than 75% of global commercial almond supply, making the life cycle performance of almond production in California of global interest. This article describes the life cycle assessment of California almond production using a Scalable, Process-based, Agronomically Responsive Cropping System Life Cycle Assessment (SPARCS-LCA) model that includes crop responses to orchard management and modeling of California’s water supply and biomass energy infrastructure. Methods A spatially and temporally resolved LCA model was developed to reflect the regional climate, resource, and agronomic conditions across California’s Central Valley by hydrologic subregion (San Joaquin Valley, Sacramento Valley, and Tulare Lake regions). The model couples a LCA framework with region-specific data, including water supply infrastructure and economics, crop productivity response models, and dynamic co-product markets, to characterize the environmental performance of California almonds. Previous LCAs of California almond found that irrigation and management of co-products were most influential in determining life cycle CO2eq emissions and energy intensity of California almond production, and both have experienced extensive changes since previous studies due to drought and changing regulatory conditions, making them a focus of sensitivity and scenario analysis. Results and discussion Results using economic allocation show that 1 kg of hulled, brown-skin almond kernel at post-harvest facility gate causes 1.92 kg CO2eq (GWP100), 50.9 MJ energy use, and 4820 L freshwater use, with regional ranges of 2.0–2.69 kg CO2eq, 42.7–59.4 MJ, and 4540–5150 L, respectively. With a substitution approach for co-product allocation, 1 kg almond kernel results in 1.23 kg CO2eq, 18.05 MJ energy use, and 4804 L freshwater use, with regional ranges of 0.51–1.95 kg CO2eq, 3.68–36.5 MJ, and 4521–5140 L, respectively. Almond freshwater use is comparable with other nut crops in California and globally. Results showed significant variability across subregions. While the San Joaquin Valley performed best in most impact categories, the Tulare Lake region produced the lowest eutrophication impacts. Conclusion While CO2eq and energy intensity of almond production increased over previous estimates, so too did credits to the system for displacement of dairy feed. These changes result from a more comprehensive model scope and improved assumptions, as well as drought-related increases in groundwater depth and associated energy demand, and decreased utilization of biomass residues for energy recovery due to closure of bioenergy plants in California. The variation among different impact categories between subregions and over time highlight the need for spatially and temporally resolved agricultural LCA.

scholarly journals Application of Plastic Wastes in Construction Materials: A Review Using the Concept of Life-Cycle Assessment in the Context of Recent Research for Future Perspectives

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3549
Author(s):  
Tulane Rodrigues da Silva ◽  
Afonso Rangel Garcez de Azevedo ◽  
Daiane Cecchin ◽  
Markssuel Teixeira Marvila ◽  
Mugahed Amran ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Solid Waste ◽  
Building Materials ◽  
Construction Materials ◽  
Plastic Waste ◽  
Plastic Wastes ◽  
Solid Waste Generation ◽  
Alternative Processes

The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

scholarly journals Research on Carbon Emissions of Electric Vehicles throughout the Life Cycle Assessment Taking into Vehicle Weight and Grid Mix Composition

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3612 ◽  
Author(s):  
Yanmei Li ◽  
Ningning Ha ◽  
Tingting Li
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Electric Vehicles ◽  
Carbon Emissions ◽  
Linear Regression Analysis ◽  
Clean Energy ◽  
Assessment Method ◽  
Weight Class ◽  
Vehicle Weight ◽  
The Impact

To study the impact of the promotion of electric vehicles on carbon emissions in China, the full life carbon emissions of electric vehicles are studied on the basis of considering such factors as vehicle weight and grid mix composition, and fuel vehicles are added for comparison. In this paper, we collect data for 34 domestic electric vehicles, and linear regression analysis is used to model the relationship between vehicle weight and energy consumption. Then, a Hybrid Life Cycle Assessment method is used to establish the life cycle carbon emission calculation model for electric vehicles and fuel vehicles. Finally, the life cycle carbon emissions of electric vehicles and fuel vehicles under different electrical energy structures are discussed using scenario analysis. The results show that under the current grid mix composition in China, the carbon emissions of electric vehicles of the same vehicle weight class are 24% to 31% higher than that of fuel vehicles. As the proportion of clean energy in the grid mix composition increases, the advantages of electric vehicles to reduce carbon emissions will gradually emerge.

Sign in / Sign up

Export Citation Format

Share Document