scholarly journals Response Surface Methodology to Optimize Methane Production from Mesophilic Anaerobic Co-Digestion of Oily-Biological Sludge and Sugarcane Bagasse

2020 ◽  
Vol 12 (5) ◽  
pp. 2116 ◽  
Author(s):  
Aiban Abdulhakim Saeed Ghaleb ◽  
Shamsul Rahman Mohamed Kutty ◽  
Yeek-Chia Ho ◽  
Ahmad Hussaini Jagaba ◽  
Azmatullah Noor ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Anaerobic Digestion ◽  
Response Surface ◽  
Sugarcane Bagasse ◽  
Organic Waste ◽  
Waste To Energy ◽  
Methane Yield ◽  
Digestion Process ◽  
Biological Sludge ◽  
Methane Bacteria

Oily-biological sludge (OBS) generated from petroleum refineries has high toxicity. Therefore, it needs an appropriate disposal method to reduce the negative impacts on the environment. The anaerobic co-digestion process is an effective method that manages and converts organic waste to energy. For effective anaerobic digestion, a co-substrate would be required to provide a suitable environment for anaerobic bacteria. In oily-biological sludge, the carbon/nitrogen (C/N) ratio and volatile solids (VS) content are very low. Therefore, it needs to be digested with organic waste that has a high C/N ratio and high VS content. This study investigates the use of sugarcane bagasse (SB) as an effective co-substrate due to its high C/N ratio and high VS content to improve the anaerobic co-digestion process with oily-biological sludge. The sugarcane bagasse also helps to delay the toxicity effect of the methane bacteria. Batch anaerobic co-digestion of oily-biological sludge was conducted with sugarcane bagasse as a co-substrate in twelve reactors with two-liter capacity, each under mesophilic conditions. The interaction effect of a C/N ratio of 20-30 and a VS co-substrate/VS inoculum ratio of 0.06-0.18 on the methane yield (mL CH4/g VSremoved) was investigated. Before the anaerobic digestion, thermochemical pre-treatment of the inoculum and co-substrate was conducted using sodium hydroxide to balance their acidic nature and provide a suitable pH environment for methane bacteria. Design and optimization for the mixing ratios were carried out by central composite design-response surface methodology (CCD-RSM). The highest predicted methane yield was found to be 63.52 mL CH4/g VSremoved, under optimum conditions (C/N ratio of 30 and co-substrate/inoculum ratio of 0.18).

scholarly journals Sugarcane Bagasse as a Co-Substrate with Oil-Refinery Biological Sludge for Biogas Production Using Batch Mesophilic Anaerobic Co-Digestion Technology: Effect of Carbon/Nitrogen Ratio

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 590
Author(s):  
Aiban Abdulhakim Saeed Ghaleb ◽  
Shamsul Rahman Mohamed Kutty ◽  
Gasim Hayder Ahmed Salih ◽  
Ahmad Hussaini Jagaba ◽  
Azmatullah Noor ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
Sugarcane Bagasse ◽  
Organic Waste ◽  
Wastewater Treatment Plants ◽  
Biogas Production ◽  
Raw Materials ◽  
Oil Refinery ◽  
Methane Yield ◽  
Oil Refineries ◽  
Biological Sludge

Man-made organic waste leads to the rapid proliferation of pollution around the globe. Effective bio-waste management can help to reduce the adverse effects of organic waste while contributing to the circular economy at the same time. The toxic oily-biological sludge generated from oil refineries’ wastewater treatment plants is a potential source for biogas energy recovery via anaerobic digestion. However, the oily-biological sludge’s carbon/nitrogen (C/N) ratio is lower than the ideal 20–30 ratio required by anaerobic digestion technology for biogas production. Sugarcane bagasse can be digested as a high C/N co-substrate while the oily-biological sludge acts as a substrate and inoculum to improve biogas production. In this study, the best C/N with co-substrate volatile solids (VS)/inoculum VS ratios for the co-digestion process of mixtures were determined empirically through batch experiments at temperatures of 35–37 °C, pH (6–8) and 60 rpm mixing. The raw materials were pre-treated mechanically and thermo-chemically to further enhance the digestibility. The best condition for the sugarcane bagasse delignification process was 1% (w/v) sodium hydroxide, 1:10 solid-liquid ratio, at 100 °C, and 150 rpm for 1 h. The results from a 33-day batch anaerobic digestion experiment indicate that the production of biogas and methane yield were concurrent with the increasing C/N and co-substrate VS/inoculum VS ratios. The total biogas yields from C/N 20.0 with co-substrate VS/inoculum VS 0.06 and C/N 30.0 with co-substrate VS/inoculum VS 0.18 ratios were 2777.0 and 9268.0 mL, respectively, including a methane yield of 980.0 and 3009.3 mL, respectively. The biogas and methane yield from C/N 30.0 were higher than the biogas and methane yields from C/N 20.0 by 70.04 and 67.44%, respectively. The highest biogas and methane yields corresponded with the highest C/N with co-substrate VS/inoculum VS ratios (30.0 and 0.18), being 200.6 mL/g VSremoved and 65.1 mL CH4/g VSremoved, respectively.

scholarly journals Waste to Energy: A Focus on the Impact of Substrate Type in Biogas Production

Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1224
Author(s):  
Nwabunwanne Nwokolo ◽  
Patrick Mukumba ◽  
KeChrist Obileke ◽  
Matthew Enebe
Keyword(s):  
Anaerobic Digestion ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Industrial Waste ◽  
Animal Manure ◽  
Nutritional Composition ◽  
Organic Wastes ◽  
Waste To Energy ◽  
Methane Yield ◽  
Substrate Type

Anaerobic digestion is an efficient technology for a sustainable conversion of various organic wastes such as animal manure, municipal solid waste, agricultural residues and industrial waste into biogas. This technology offers a unique set of benefits, some of which include a good waste management technique, enhancement in the ecology of rural areas, improvement in health through a decrease of pathogens and optimization of the energy consumption of communities. The biogas produced through anaerobic digestion varies in composition, but it consists mainly of carbon dioxide methane together with a low quantity of trace gases. The variation in biogas composition are dependent on some factors namely the substrate type being digested, pH, operating temperature, organic loading rate, hydraulic retention time and digester design. However, the type of substrate used is of greater interest due to the direct dependency of microorganism activities on the nutritional composition of the substrate. Therefore, the aim of this review study is to provide a detailed analysis of the various types of organic wastes that have been used as a substrate for the sustainable production of biogas. Biogas formation from various substrates reported in the literature were investigated, an analysis and characterization of these substrates provided the pro and cons associated with each substrate. The findings obtained showed that the methane yield for all animal manure varied from 157 to 500 mL/gVS with goat and pig manure superseding the other animal manure whereas lignocellulose biomass varied from 160 to 212 mL/gVS. In addition, organic municipal solid waste and industrial waste showed methane yield in the ranges of 143–516 mL/gVS and 25–429 mL/gVS respectively. These variations in methane yield are primarily attributed to the nutritional composition of the various substrates.

Application of response surface methodology to optimize the fabrication of ZnCl2-activated carbon from sugarcane bagasse for the removal of Cu2+

2017 ◽  
Vol 75 (9) ◽  
pp. 2047-2055 ◽  
Author(s):  
Thuan Van Tran ◽  
Quynh Thi Phuong Bui ◽  
Trinh Duy Nguyen ◽  
Van Thi Thanh Ho ◽  
Long Giang Bach
Keyword(s):  
Response Surface Methodology ◽  
Activated Carbon ◽  
Response Surface ◽  
Sugarcane Bagasse ◽  
Interactive Effect ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Aqueous Environment ◽  
Activation Temperature

The present study focused on the application of response surface methodology to optimize the fabrication of activated carbon (AC) from sugarcane bagasse for adsorption of Cu2+ ion. The AC was synthesized via chemical activation with ZnCl2 as the activating agent. The central composite design based experiments were performed to assess the individual and interactive effect of influential parameters, including activation temperature, ZnCl2 impregnation ratio and activation time on the AC yield and removal of Cu2+ ion from the aqueous environment. The statistically significant, well-fitting quadratic regression models were successfully developed as confirmed by high F- and low P-values (<0.0001), high correlation coefficients and lack-of-fit tests. Accordingly, the optimum AC yield and removal efficiency of Cu2+ were predicted, respectively, as 48.8% and 92.7% which were approximate to the actual values. By applying the predicted optimal parameters, the AC shows a surprisingly high surface area of around 1,500 m2/g accompanied by large pore volume and narrow micropore size at low fabrication temperature.

Sign in / Sign up

Export Citation Format

Share Document