scholarly journals Human Health, Economic and Environmental Assessment of Onsite Non-Potable Water Reuse Systems for a Large, Mixed-Use Urban Building

2020 ◽  
Vol 12 (13) ◽  
pp. 5459
Author(s):  
Sam Arden ◽  
Ben Morelli ◽  
Mary Schoen ◽  
Sarah Cashman ◽  
Michael Jahne ◽  
...  
Keyword(s):  
Public Health ◽  
Life Cycle ◽  
Human Health ◽  
Life Cycle Cost ◽  
Water Reuse ◽  
Energy Demand ◽  
Membrane Bioreactor ◽  
Thermal Recovery ◽  
Hot Water ◽  
Quantitative Microbial Risk Assessment

Onsite non-potable reuse (NPR) is being increasingly considered as a viable option to address water scarcity and infrastructure challenges, particularly at the building scale. However, there are a range of possible treatment technologies, source water options, and treatment system sizes, each with its unique costs and benefits. While demonstration projects are proving that these systems can be technologically feasible and protective of public health, little guidance exists for identifying systems that balance public health protection with environmental and economic performance. This study uses quantitative microbial risk assessment, life cycle assessment and life cycle cost analysis to characterize the human health, environmental and economic aspects of onsite NPR systems. Treatment trains for both mixed wastewater and source-separated graywater were modeled using a core biological process—an aerobic membrane bioreactor (AeMBR), an anaerobic membrane bioreactor (AnMBR) or recirculating vertical flow wetland (RVFW)—and additional treatment and disinfection unit processes sufficient to meet current health-based NPR guidelines. Results show that the graywater AeMBR system designed to provide 100% of onsite non-potable demand results in the lowest impacts across most environmental and human health metrics considered but costs more than the mixed-wastewater version due to the need for a separate collection system. The use of multiple metrics also allows for identification of weaknesses in systems that lead to burden shifting. For example, although the RVFW process requires less energy than the AeMBR process, the RVFW system is more environmentally impactful and costly when considering the additional unit processes required to protect human health. Similarly, we show that incorporation of thermal recovery units to reduce hot water energy consumption can offset some environmental impacts but result in increases to others, including cumulative energy demand. Results demonstrate the need for additional data on the pathogen treatment performance of NPR systems to inform NPR health guidance.

scholarly journals Environmental and cost benefits of co-digesting food waste at wastewater treatment facilities

2020 ◽  
Author(s):  
Ben Morelli ◽  
Sarah Cashman ◽  
Xin (Cissy) Ma ◽  
Jason Turgeon ◽  
Sam Arden ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Life Cycle Cost ◽  
Water Reuse ◽  
Energy Demand ◽  
Energy Requirement ◽  
Baseline Scenario ◽  
Cumulative Energy ◽  
Cumulative Energy Demand

Abstract The wastewater industry is undergoing a paradigm shift from focusing solely on treatment to incorporating concepts aimed at mitigating environmental impacts such as energy and nutrient recovery and water reuse. This study uses life cycle assessment and life cycle cost analysis to investigate the effect of expanding anaerobic digestion (AD) capacity and adding combined heat and power on environmental and cost indicators at a mid-sized wastewater treatment facility (WWTF) in Massachusetts, USA. Since 2014, Massachusetts has banned the disposal of organic waste from commercial organizations producing more than one ton of material per week. The WWTF's additional digester capacity allows the co-digestion of municipal solids with a food-based engineered bioslurry due to this ban. Study data were compiled for several AD feedstock quantity and performance scenarios, and compared to a baseline scenario representative of historic plant operations prior to co-digestion. Reductions in environmental impact are demonstrated for six of eight environmental impacts, including global climate change potential and cumulative energy demand. Eutrophication potential increases by 10 percent and 24 percent across assessed scenarios. Water use remains relatively constant across scenarios. Facility energy production increases dramatically with co-digestion, satisfying 100 percent of the WWTF's thermal energy requirement and producing surplus electricity assuming full AD capacity utilization.

scholarly journals Residential Solar-Based Seasonal Thermal Storage Systems in Cold Climates: Building Envelope and Thermal Storage

Energies ◽  
2012 ◽  
Vol 5 (10) ◽  
pp. 3972-3985 ◽  
Author(s):  
Alexandre Hugo ◽  
Radu Zmeureanu
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Energy Demand ◽  
Energy Use ◽  
Thermal Storage ◽  
Building Envelope ◽  
Hot Water ◽  
Cold Climates ◽  
Solar Collectors

The reduction of electricity use for heating and domestic hot water in cold climates can be achieved by: (1) reducing the heating loads through the improvement of the thermal performance of house envelopes, and (2) using solar energy through a residential solar-based thermal storage system. First, this paper presents the life cycle energy and cost analysis of a typical one-storey detached house, located in Montreal, Canada. Simulation of annual energy use is performed using the TRNSYS software. Second, several design alternatives with improved thermal resistance for walls, ceiling and windows, increased overall air tightness, and increased window-to-wall ratio of South facing windows are evaluated with respect to the life cycle energy use, life cycle emissions and life cycle cost. The solution that minimizes the energy demand is chosen as a reference house for the study of long-term thermal storage. Third, the computer simulation of a solar heating system with solar thermal collectors and long-term thermal storage capacity is presented. Finally, the life cycle cost and life cycle energy use of the solar combisystem are estimated for flat-plate solar collectors and evacuated tube solar collectors, respectively, for the economic and climatic conditions of this study.

EPEGENTIC TOXICOLOGY: PERSPECTIVES OF THE DEVELOPMENT

2018 ◽  
pp. 2-7
Author(s):  
G. A. Sofronov ◽  
E. L. Patkin
Keyword(s):  
Public Health ◽  
Life Cycle ◽  
Human Health ◽  
Chronic Exposure ◽  
Environmental Pollutants ◽  
Epigenetic Mechanisms ◽  
Epigenetic Changes ◽  
Mechanism Of Formation ◽  
Health Disorders ◽  
Time Periods

One of the complex problems of modern experimental toxicology remains the molecular mechanism of formation of human health disorders separated at different time periods from acute or chronic exposure to toxic environmental pollutants (ecotoxicants). Identifying and understanding what epigenetic changes are induced by the environment, and how they can lead to unfavorable outcome, are vital for protecting public health. Therefore, we consider it important a modern understanding of epigenetic mechanisms involved in the life cycle of mammals and assess available data on the environmentally caused epigenetic toxicity and, accordingly fledging epigenenomic (epigenetic) regulatory toxicology.

scholarly journals Optimal Renovation Strategies through Life-Cycle Analysis in a Pilot Building Located in a Mild Mediterranean Climate

2021 ◽  
Vol 11 (4) ◽  
pp. 1423
Author(s):  
José Manuel Salmerón Lissen ◽  
Cristina Isabel Jareño Escudero ◽  
Francisco José Sánchez de la Flor ◽  
Miriam Navarro Escudero ◽  
Theoni Karlessi ◽  
...  
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Mediterranean Climate ◽  
Building Envelope ◽  
Economic Life ◽  
Hot Water ◽  
Optimal Solutions ◽  
Building Stock ◽  
Existing Building ◽  
The Cost

The 2030 climate and energy framework includes EU-wide targets and policy objectives for the period 2021–2030 of (1) at least 55% cuts in greenhouse gas emissions (from 1990 levels); (2) at least 32% share for renewable energy; and (3) at least 32.5% improvement in energy efficiency. In this context, the methodology of the cost-optimal level from the life-cycle cost approach has been applied to calculate the cost of renovating the existing building stock in Europe. The aim of this research is to analyze a pilot building using the cost-optimal methodology to determine the renovation measures that lead to the lowest life-cycle cost during the estimated economic life of the building. The case under study is an apartment building located in a mild Mediterranean climate (Castellon, SP). A package of 12 optimal solutions has been obtained to show the importance of the choice of the elements and systems for renovating building envelopes and how energy and economic aspects influence this choice. Simulations have shown that these packages of optimal solutions (different configurations for the building envelope, thermal bridges, airtightness and ventilation, and domestic hot water production systems) can provide savings in the primary energy consumption of up to 60%.

scholarly journals Least Cost Analysis of Energy Efficiency Upgrades for Ontario Using Trnsys

2021 ◽  
Author(s):  
Amir Fereidouni Kondri
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Cost Analysis ◽  
Energy Efficient ◽  
Life Cycle Cost ◽  
Net Present Value ◽  
Hot Water ◽  
Life Cycle Costs ◽  
Residential Housing ◽  
Domestic Hot Water

This report presents the methodology for determining least cost energy efficient upgrade solutions in new residential housing using brute force sequential search (BFSS) method for integration into the reference house to reduce energy consumption while minimizing the net present value (NPV) of life cycle costs. The results showed that, based on the life cycle cost analysis of 30 years, the optimal upgrades resulted in the average of 19.25% (case 1), 31% (case 2a), and 21% (case 2b) reduction in annual energy consumption. Economic conditions affect the sequencing of the upgrades. In this respect the preferred upgrades to be performed in order are; domestic hot water heating, above grade wall insulation, cooling systems, ceiling insulation, floor insulation, heat recovery ventilator, basement slab insulation and below grade wall insulation. When the gas commodity pricing becomes high, the more energy efficient upgrades for domestic hot water (DHW) get selected at a cost premium.

scholarly journals Life Cycle Assessment of Reusable Plastic Crates (RPCs)

Resources ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 110 ◽  
Author(s):  
Camilla Tua ◽  
Laura Biganzoli ◽  
Mario Grosso ◽  
Lucia Rigamonti
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Sustainability ◽  
Energy Demand ◽  
Hot Water ◽  
Cumulative Energy ◽  
Cumulative Energy Demand ◽  
Environmental Effectiveness ◽  
Single Use ◽  
Italian Context

The European packaging market is forecast to grow 1.9% annually in the next years, with an increasing use of returnable packages. In this context, it is important to assess the real environmental effectiveness of the packaging re-use practice in terms of environmental impacts. This life cycle assessment aims to evaluate the environmental performances of reusable plastic crates (RPCs), which are used for the distribution of 36% of fruit and vegetables in Italy. RPCs can be re-used several times after a reconditioning process, i.e., inspection, washing, and sanitization with hot water and chemicals. The analysis was performed considering 12 impact categories, as well as the cumulative energy demand indicator and a tailor-made water consumption indicator. The results show that when the RPCs are used for less than 20 deliveries, the impacts of the life cycle are dominated by the manufacturing stage. By increasing the number of deliveries, the contribution of the reconditioning process increases, reaching 30–70% of the overall impacts for 125 uses. A minimum of three deliveries of the RPCs is required in order to perform better than an alternative system where crates of the same capacity (but 60% lighter) are single-use. The same modeling approach can be used to evaluate the environmental sustainability of other types of returnable packages, in order to have a complete overview for the Italian context and other European countries.

Membrane Bioreactor Life-Cycle Cost Assessment Simulation: Digital Game-Based Learning

2010 ◽  
Vol 2010 (12) ◽  
pp. 4336-4345
Author(s):  
Dave Kinnear ◽  
Ingmar Nopens ◽  
Marie-Laure Pellegrin ◽  
Thomas Maere ◽  
Daniel Nolasco ◽  
...  
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Membrane Bioreactor ◽  
Cost Assessment ◽  
Digital Game ◽  
Game Based Learning

Life Cycle Cost for a Solar Heating and Cooling System

2009 ◽  
Author(s):  
Yin Hang ◽  
Ming Qu
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Cooling System ◽  
Heating System ◽  
Solar Heating ◽  
Hot Water ◽  
Solar Absorption ◽  
Heating And Cooling ◽  
Absorption Cooling ◽  
Solar Absorption Cooling

Solar absorption cooling has been an intriguing research subject since 1970. However, it is not widely applied because the first cost of the system is high, the commercial hot water absorption chiller is not mature, the site demonstration and evaluation are not adequate and the price of conventional fossil energy sources is relatively low. This paper investigates the commercialization potentials of solar absorption cooling and solar heating system by comparing the life cycle cost between it and the conventional electrical chiller cooling and gas-fired boiler heating system. A computational model has been programmed in the Engineering Equation Solver (EES) to analyze the economical performances of the two systems applied to a dedicated building. The model considers the cost of capital, installation, operation and maintenance, the discount rate, the fuel prices, and the inflation rates. The result of the model indicated that given the present fuel cost, the solar absorption cooling and heating system is not as economic as the conventional system especially when its size is small. However, according to the sensitivity analysis carried, the solar absorption cooling and heating system could compete with the conventional cooling and heating system when the electricity price and fuel inflation increase.

scholarly journals Least Cost Analysis of Energy Efficiency Upgrades for Ontario Using Trnsys

2021 ◽  
Author(s):  
Amir Fereidouni Kondri
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Cost Analysis ◽  
Energy Efficient ◽  
Life Cycle Cost ◽  
Net Present Value ◽  
Hot Water ◽  
Life Cycle Costs ◽  
Residential Housing ◽  
Domestic Hot Water

This report presents the methodology for determining least cost energy efficient upgrade solutions in new residential housing using brute force sequential search (BFSS) method for integration into the reference house to reduce energy consumption while minimizing the net present value (NPV) of life cycle costs. The results showed that, based on the life cycle cost analysis of 30 years, the optimal upgrades resulted in the average of 19.25% (case 1), 31% (case 2a), and 21% (case 2b) reduction in annual energy consumption. Economic conditions affect the sequencing of the upgrades. In this respect the preferred upgrades to be performed in order are; domestic hot water heating, above grade wall insulation, cooling systems, ceiling insulation, floor insulation, heat recovery ventilator, basement slab insulation and below grade wall insulation. When the gas commodity pricing becomes high, the more energy efficient upgrades for domestic hot water (DHW) get selected at a cost premium.

Sign in / Sign up

Export Citation Format

Share Document