scholarly journals A Comparative Study of Models for the Construction Duration Prediction in Highway Road Projects of India

2021 ◽  
Vol 13 (8) ◽  
pp. 4552
Author(s):  
P. Velumani ◽  
N. V. N. Nampoothiri ◽  
Urbański Mariusz
Keyword(s):  
Construction Projects ◽  
Small Error ◽  
Time Cost ◽  
Smoothing Techniques ◽  
Acceptable Accuracy ◽  
Road Projects ◽  
Analytical Tools ◽  
Duration Prediction ◽  
Selection Of

Predicting the duration of construction projects with acceptable accuracy is a problem for contractors and researchers. Numerous researchers and tools are involved in sorting out this problem. The aim of the study is to predict the construction duration using four analytical tools as an approach. The success of construction projects in regard to time depends on various factors such as selection of contractors, consultants, cost of the projects, quality of the projects, the quantity of the projects, environmental factors, etc. Presently available commercial tools in the market are not designed as universally common and concerned. Every tool performs well in a particular situation. The prediction of India’s highway road projects duration is the biggest construction issue in the country due to various reasons. To overcome this problem, the methodology of the paper adopts various strategies to find suitable tools to predict the highway road projects’ duration, in which it classifies and analyzes the collected data. As a part of this work, the details of 363 government infrastructure projects (traditional procurement) were collected from 2000 to 2018. The present study also adopts various tools for duration prediction such as artificial neural networks (ANNs), smoothing techniques, time series analysis, and Bromilow’s time–cost (BTC) model. The results of the study recommend smoothing techniques with a constant value of 0.3, which gave the remarkable very small error of 1.2%, and its outcomes become even better when compared to other techniques.

scholarly journals A review of causes of variation order in the construction of terrace housing projects in Malaysia

2019 ◽  
Vol 277 ◽  
pp. 03013
Author(s):  
Noraziah Mohammad ◽  
Zabidi Hamzah
Keyword(s):  
Construction Industry ◽  
Construction Projects ◽  
Construction Project ◽  
Extensive Literature ◽  
Time Cost ◽  
Construction Time ◽  
Building Projects ◽  
Housing Projects ◽  
Building Project

Variation order refers to any changes from the scope, plan, specification or contract document in the construction project. This changes of work is a common problem in construction projects in Malaysia. It is inevitable in any construction project and this problem can become more serious when variation order causes work progress to be impaired as a results it increased the construction time and cost that affects the construction industry in Malaysia. This paper critically review the causes of variation order in the construction industry on the double-storey terrace housing project in Malaysia. The discussions began with the construction industry in Malaysia and then related parties involved in the construction industry. The extensive local and abroad literature review on the definitions of variation order and analysis of past studies conducted on variation order and the previous study of the prediction model of variation. The extensive literature on variation order in the construction of building project may help to improve the performance in term of time, cost and quality of the construction of building projects in Malaysia.

scholarly journals Investigational Model to Generate Aggregate Value in Eco-sustainable Housing Development

2018 ◽  
Vol 14 (5) ◽  
pp. 72
Author(s):  
Ernesto Adrian Diaz Montagner ◽  
Juan Carlos Perez Garcia
Keyword(s):  
Value Chain ◽  
Construction Projects ◽  
New Technologies ◽  
Cost Savings ◽  
Added Value ◽  
Construction Company ◽  
Sustainable Housing ◽  
Sustainable Value ◽  
Selection Of

Purpose – Conventional materials and procedures in worldwide construction sector is a paradigm that requires change. Constructors usually do not take the adventure of testing novel techniques and materials in their construction projects and, as a result, profits are usually given in terms of time and cost savings. The purpose of this article is to introduce a model to add aggregate value in eco-sustainable dwelling construction through ecological sustainable value chain and hypothesis settlement. Design/methodology/approach - A review of the literature was done in databases using keywords. The selection of sources includes scientific articles and case studies based on different methods and contexts which were carried out. Findings - The findings suggest the implementation of the training of both the employee who works in the construction and the client regarding selfsustainable construction. A significant improvement was obtained based on the commercial relations of suppliers, the client, and also with the construction company. Finally, innovation in at least one of the six proposed aspects was carried out: new technologies, including eco-technologies, the quality of materials (including the eco-sustainable ones), the segmentation of the demand for eco-sustainable housing and its new ways of marketing and financing. They were, however, proposed for added value generation for the development of eco-sustainable housing. Originality/value - A model for the generation of added value in the construction of eco-sustainable housing was elaborated based on the relationships between human and relational capital, training, and the generation of aggregate value.

ON THE EXPERT’S RIGHT TO BE PRESENT AT LEGAL PROCEEDINGS

2016 ◽  
Vol 15 ◽  
pp. 163-171
Author(s):  
M. G. Shcherbakovskiy
Keyword(s):  
Initial Data ◽  
Legal Proceedings ◽  
Reliable Assessment ◽  
Data Acquiring ◽  
Selection Of

The article discusses the reasonsfor an expert to participate in legal proceedings. The gnoseological reason for that consists of the bad quality of materials subject to examination that renders the examination either completely impossible or compromises objective, reasoned and reliable assessment of the findings. The procedural reason consists ofa proscription for an expert to collect evidence himself or herself. The author investigates into the ways of how an expert can participate in legal proceedings. If the defense invites an expert to participate in the proceedings, then it is recommended that his or her involvement should be in the presence of attesting witnesses and recorded in the protocol. In the course of the legal proceedings an expert has the following tasks: adding initial data, acquiring new initial data, understanding the situation of the incident, acquiring new objects to be studied, including samples for examination. An expert’s participation in legal proceedings differs from the participation of a specialist or an examination on the scene of the incident. The author describes the tasks that an expert solves in the course of legal proceedings, the peculiarities ofan investigation experiment practices, the selection of samples for an examination, inspection, interrogation.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

DESIGN, SIMULATION AND IMPLEMENTATION MONITORING SYSTEM FOR SYSTEM CONTROL C4 FEEDING PUMP FOR FEED VAPORIZATION IN THE BUTADIENE PLANT

2020 ◽  
Vol 1 (1) ◽  
pp. 31-35
Author(s):  
Fahmi Yunistyawan ◽  
Yunistyawan J Berchmans ◽  
Gembong Baskoro
Keyword(s):  
Motor Control ◽  
Control System ◽  
Field Operator ◽  
System Control ◽  
Variable Speed ◽  
Variable Speed Drive ◽  
Software And Hardware ◽  
Discharge Pressure ◽  
Selection Of

This study implements the auto start control system on an electric motor 3 phase C4Feeding pump when the discharge pressure is low-low (4.3 kg /cm²). The C4 feeding pumpmotor was initially manually operated from the local control station, this was very ineffectiveand inefficient because it still relied on the field operator to operate the pump motor and whenthe plant was in normal operating it is very risk if the field operator late to operate motor then itwill impact to quality of the product, and if the delay time to operate motor is too long then planthave to shut down, therefore improvement is needed in the C4 feeding pump motor controlsystem. In this paper, various types of 3-phase motor control are explained which allow it to beapplied to the C4 feeding pump motor that are on-off, inverter, and variable speed drive andefficient selection of the three systems control of the motor. Software and hardware used in thisthesis work are DCS CENTUM VP Yokogawa.

Thomas More’s Correspondence in a Spanish Ambiance

Moreana ◽  
2002 ◽  
Vol 39 (Number 149) (1) ◽  
pp. 41-60 ◽  
Author(s):  
Eugenio M. Olivares Merino
Keyword(s):  
The Subject ◽  
Selection Of

The recent reprinting of Álvaro de Silva’s 1998 edition of a selection of More’s letters prompts the author to examine the subject of Spanish translations of More, and of de Silva’s general commentary on More’s correspondence and on his relationship to other humanists. The author reflects on aspects of More’s personality as exposed in his letters and uses what he finds as a corrective to several biographical misconceptions. He points out the strengths and weaknesses of de Silva’s work and compares it with that of other translators, particularly Elizabeth Rogers, and notes the particularly Spanish quality of de Silva’s edition.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Urban Areas ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature of urban areas. This study explored issue of measuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% of neighbourhoods' area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined. 

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of ◽  
Monotonic Relation

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature ofurban areas. This study explored issue ofmeasuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% ofneighbourhoods, area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined.

Sign in / Sign up

Export Citation Format

Share Document