scholarly journals Mechanical Properties of High-Performance Hybrid Fibre-Reinforced Concrete at Elevated Temperatures

2021 ◽  
Vol 13 (23) ◽  
pp. 13392
Author(s):  
Moawiah Mubarak ◽  
Raizal Saifulnaaz Muhammad Rashid ◽  
Mugahed Amran ◽  
Roman Fediuk ◽  
Nikolai Vatin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
High Performance ◽  
Elevated Temperatures ◽  
High Performance Concrete ◽  
Concrete Strength ◽  
Fibre Reinforced Concrete ◽  
Explosive Spalling ◽  
Hybrid Fibre ◽  
Before And After

Deterioration of concrete’s integrity under elevated temperature requires an alteration in its composition to have better thermal stability. Fibre-reinforced concrete has shown significant improvements in concrete strength and this paper aimed to investigate the influence of steel (ST) and polypropylene (PP) fibres on the behaviour of high-performance concrete (HPC) exposed to elevated temperatures. Six mixtures were prepared and cast by adding one or two types of polypropylene fibre (54 and 9 mm) at 0.25 or 0.5% and either singly or in a hybrid combination, along with a fixed volumetric content at 1% of five-dimensional hooked steel (5DH) fibres. At the age of 28 days, samples were heated to the targeted temperature of 800 °C and cooled down naturally to the laboratory temperature. Visual inspection, flexural, split tensile and compressive strengths were examined before and after the exposure to elevated temperatures. Results exhibited that the hybridization of long and short PP fibres, along with the ST fibres, has notably improved all residual mechanical properties of HPC and kept the integrity of concrete after exposure to elevated temperatures. In addition, PP fibres can significantly prevent spalling, but ST fibres were ineffective in mitigating explosive spalling in beams specimens.

scholarly journals Optimizing the Mechanical Properties of Ultra-High-Performance Fibre-Reinforced Concrete to Increase Its Resistance to Projectile Impact

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5098
Author(s):  
Anna L. Mina ◽  
Konstantinos G. Trezos ◽  
Michael F. Petrou
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Fibre Reinforced Concrete ◽  
Direct Tension ◽  
Steel Fibres ◽  
Projectile Impact ◽  
Binder Ratio ◽  
High Performance Fibre

This study describes an extensive experimental investigation of various mechanical properties of Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC). The scope is to achieve high strength and ductile behaviour, hence providing optimal resistance to projectile impact. Eight different mixtures were produced and tested, three mixtures of Ultra-High-Performance Concrete (UHPC) and five mixtures of UHPFRC, by changing the amount and length of the steel fibres, the quantity of the superplasticizer, and the water to binder (w/b) ratio. Full stress–strain curves from compression, direct tension, and flexural tests were obtained from one batch of each mixture to examine the influence of the above parameters on the mechanical properties. The Poisson’s ratio and modulus of elasticity in compression and direct tension were measured. Additionally, a factor was determined to convert the cubic strength to cylindrical. Based on the test results, the mixture with high volume (6%) and a combination of two lengths of steel fibres (3% each), water to binder ratio of 0.16% and 6.1% of superplasticizer to binder ratio exhibited the highest strength and presented great deformability in the plastic region. A numerical simulation developed using ABAQUS was capable of capturing very well the experimental three-point bending response of the UHPFRC best-performed mixture.

scholarly journals Mechanical Properties of Concrete with Steel and Polypropylene Fibres at Elevated Temperatures

Fibers ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 9 ◽  
Author(s):  
Josipa Bošnjak ◽  
Akanshu Sharma ◽  
Kevin Grauf
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Elevated Temperature ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Fibre Reinforced Concrete ◽  
Explosive Spalling ◽  
Steel Fibres ◽  
Strength Concrete

Addition of steel fibres to concrete is known to have a significant positive influence on the mechanical properties of concrete. Micro polypropylene (PP) fibres are added to concrete to improve its performance under thermal loads such as in case of fire by preventing the phenomena of explosive spalling. An optimum mixture of steel and micro PP fibres added to concrete may be utilized to enhance both the mechanical and thermal behaviour of concrete. In this work, systematic investigations were carried out to study the influence of elevated temperature on the mechanical properties and physical properties of high strength concrete without and with fibres. Three different mixtures for high strength concrete were used, namely normal concrete without fibres, Steel fibre reinforced concrete and Hybrid fibre reinforced concrete having a blend of hooked end steel fibres and micro PP fibres. The specimens were tested in ambient conditions as well as after exposure to a pre-defined elevated temperature and cooling down to room temperature. For all investigated concrete mixtures the thermal degradation of following properties were investigated: compressive strength, tensile splitting strength, bending strength, fracture energy and static modulus of elasticity. This paper summarizes the findings of the tests performed.

scholarly journals Numerical Simulation of the Fracture Behaviour of High-Performance Fibre Reinforced Concrete by Using a Cohesive-Crack-Based Inverse Analysis

2021 ◽  
Author(s):  
Alejandro Enfedaque ◽  
Marcos G. Alberti ◽  
Jaime C. Gálvez ◽  
Pedro Cabanas
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Inverse Analysis ◽  
High Performance ◽  
Fracture Behaviour ◽  
Constitutive Models ◽  
Cohesive Crack ◽  
Fibre Reinforced Concrete ◽  
Steel Fibres ◽  
Structural Applications

Fibre reinforced concrete (FRC) has become an alternative for structural applications due its outstanding mechanical properties. The appearance of new types of fibres and the fibre cocktails that can be configured mixing them has created FRC that clearly exceed the minimum mechanical properties required in the standards. Consequently, in order to take full advantage of the contribution of the fibres in construction projects, it is of great interest to have constitutive models that simulate the behaviour of the materials. This study aimed to simulate the fracture behaviour of five types of FRC, three with steel hooked fibres, one with a combination of two types of steel fibres and one with a combination of polyolefin fibres and two types of steel fibres, by means of an inverse analysis based on the cohesive crack approach. The results of the numerical simulations defined the softening functions of each FRC formulation and have pointed out the synergies that are created through use of fibre cocktails. The information obtained might suppose a remarkable advance for designers using high-performance FRC in structural elements.

scholarly journals Effect of Using Hybrid Polypropylene and Glass Fibre on the Mechanical Properties and Permeability of Concrete

Materials ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 3786 ◽  
Author(s):  
Abubaker A. M. Ahmed ◽  
Yanmin Jia
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Glass Fibre ◽  
Single Fibre ◽  
Air Permeability ◽  
Fibre Content ◽  
Peak Performance ◽  
Fibre Reinforced Concrete ◽  
Performance Limit ◽  
Hybrid Fibre

A comprehensive program of experiments consisting of compression, uniaxial compression, direct shear, flexural as well as splitting tensile and air permeability tests were performed to analyse the effect of the level of fibre dosage and the water–cement ratio on the physical properties of hybrid fibre-reinforced concrete (HFRC). Two types of fibres were studied in terms of their effect on the properties of HFRC. The results indicated that the mechanical properties of concrete were significantly improved by increasing the fibre content. However, increasing the percentage fibre content past a certain peak performance limit (0.9% glass fibre (GF) and 0.45% polypropylene fibre (PPF)) led to a decrease in strength compared to reference mixes. Additionally, the incorporation of hybrid fibres yielded an increase in air permeability in the tested specimens. The results showed that the strength-related properties of HFRC were superior to the properties of single fibre-reinforced concrete.

scholarly journals ENHANCEMENTOF MECHANICAL PROPERTIES OF LIGHTWEIGHT HYBRID FIBRE REINFORCED CONCRETE (LWHFRC)

2020 ◽  
Vol 8 (9) ◽  
pp. 86-104
Author(s):  
Eniyachandramouli Gunasekaran ◽  
◽  
Govindhan Shanmugam ◽  
Ranjithselvan Karuppusamy ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Fibre Reinforced Concrete ◽  
Hybrid Fibre

Behaviour of Different Types of Concrete under Impact and Quasi-Static Loading

2013 ◽  
Vol 486 ◽  
pp. 295-300 ◽  
Author(s):  
Petr Máca ◽  
Petr Konvalinka ◽  
Manfred Curbach
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Impact Loading ◽  
High Performance ◽  
High Performance Concrete ◽  
Fibre Reinforced Concrete ◽  
Static Conditions ◽  
Direct Tensile ◽  
Direct Tensile Strength ◽  
The Impact

This paper describes mixture formulation of Ultra High Performance Fibre Reinforced Concrete (UHPFRC) with 2% of fibres by volume and its response to quasi-static and dynamic impact loading. The UHPFRC mixture was prepared using locally available constituents and no special curing or mixing methods were used for its production. In addition, the mechanical parameters of three other types of concrete, i.e. normal strength concrete (NSC), fibre reinforced concrete (FRC) and high performance concrete (HPC) is compared. The main properties assessed throughout the experimental work are compressive, flexural and direct tensile strength as well as response of tested concretes to impact flexural loading. The impact loading is produced by a vertically falling weight of 24 kg from the height of 1 m on concrete prisms. The strain rate increase corresponds to low-velocity impacts such as vehicle crash or falling rocks. Compressive strength of UHPFRC exceeded 130 MPa and its direct tensile strength was 10.3 MPa. This type of concrete also exhibited strain hardening both in flexure under quasi-static conditions and during impact. Based on the comparison of impact reactions, it was concluded that the resistance of UHPFRC to impact loading is superior compared to the referent types of concretes (NSC, FRC, HPC).

Sign in / Sign up

Export Citation Format

Share Document