scholarly journals Hyporheic Process Restoration: Design and Performance of an Engineered Streambed

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 425 ◽  
Author(s):  
Paul D. Bakke ◽  
Michael Hrachovec ◽  
Katherine D. Lynch

Stream restoration designed specifically to enhance hyporheic processes has seldom been contemplated. To gain experience with hyporheic restoration, an engineered streambed was built using a gravel mixture formulated to mimic natural streambed composition, filling an over-excavated channel to a minimum depth of 90 cm. Specially designed plunge-pool structures, built with subsurface gravel extending down to 2.4 m, promoted greatly enhanced hyporheic circulation, path length, and residence time. Hyporheic process enhancement was verified using intra-gravel temperature mapping to document the distribution and strength of upwelling and downwelling zones, computation of vertical water flux using diurnal streambed temperature patterns, estimation of hyporheic zone cross section using sodium chloride tracer studies, and repeat measurements of streambed sand content to document evolution of the engineered streambed over time. Results showed that vertical water flux in the vicinity of plunge-pool structures was quite large, averaging 89 times the pre-construction rate, and 17 times larger than maximum rates measured in a pristine stream in Idaho. Upwelling and downwelling strengths in the constructed channel were larger and more spatially diverse than in the control. Streambed sand content showed a variety of response over time, indicating that rapid return to an embedded, impermeable state is not occurring.

2019 ◽  
Author(s):  
Hossein Alimohammadi ◽  
Mostafa Dalvi Esfahani ◽  
Mohammadali Lotfollahi Yaghin

In this study, the seismic behavior of the concrete shear wall considering the opening with different shapes and constant cross-section has been studied, and for this purpose, several shear walls are placed under the increasingly non-linear static analysis (Pushover). These case studies modeled in 3D Abaqus Software, and the results of the ductility coefficient, hardness, energy absorption, added resistance, the final shape, and the final resistance are compared to shear walls without opening.


2016 ◽  
Vol 53 (1) ◽  
pp. 5-28 ◽  
Author(s):  
Grace Ford ◽  
David Pyles ◽  
Marieke Dechesne

A continuous window into the fluvial-lacustrine basin-fill succession of the Uinta Basin is exposed along a 48-mile (77-kilometer) transect up the modern Green River from Three Fords to Sand Wash in Desolation Canyon, Utah. In ascending order the stratigraphic units are: 1) Flagstaff Limestone, 2) lower Wasatch member of the Wasatch Formation, 3) middle Wasatch member of the Wasatch Formation, 4) upper Wasatch member of the Wasatch Formation, 5) Uteland Butte member of the lower Green River Formation, 6) lower Green River Formation, 7) Renegade Tongue of the lower Green River Formation, 8) middle Green River Formation, and 9) the Mahogany oil shale zone marking the boundary between the middle and upper Green River Formations. This article uses regional field mapping, geologic maps, photographs, and descriptions of the stratigraphic unit including: 1) bounding surfaces, 2) key upward stratigraphic characteristics within the unit, and 3) longitudinal changes along the river transect. This information is used to create a north-south cross section through the basin-fill succession and a detailed geologic map of Desolation Canyon. The cross section documents stratigraphic relationships previously unreported and contrasts with earlier interpretations in two ways: 1) abrupt upward shifts in the stratigraphy documented herein, contrast with the gradual interfingering relationships proposed by Ryder et al., (1976) and Fouch et al., (1994), 2) we document fluvial deposits of the lower and middle Wasatch to be distinct and more widespread than previously recognized. In addition, we document that the Uteland Butte member of the lower Green River Formation was deposited in a lacustrine environment in Desolation Canyon. Two large-scale (member-scale) upward patterns are noted: Waltherian, and non-Waltherian. The upward successions in Waltherian progressions record progradation or retrogradation of a linked fluvial-lacustrine system across the area; whereas the upward successions in non-Waltherian progressions record large-scale changes in the depositional system that are not related to progradation or retrogradation of the ancient lacustrine shoreline. Four Waltherian progressions are noted: 1) the Flagstaff Limestone to lower Wasatch Formation member records the upward transition from lacustrine to fluvial—or shallowing-upward succession; 2) the upper Wasatch to Uteland Butte records the upward transition from fluvial to lacustrine—or a deepening upward succession; 3) the Uteland Butte to Renegade Tongue records the upward transition from lacustrine to fluvial—a shallowing-upward succession; and 4) the Renegade Tongue to Mahogany oil shale interval records the upward transition from fluvial to lacustrine—a deepening upward succession. The two non-Waltherian progressions in the study area are: 1) the lower to middle Wasatch, which records the abrupt shift from low to high net-sand content fluvial system, and 2) the middle to upper Wasatch, which records the abrupt shift from high to intermediate net-sand content fluvial system.


Proceedings ◽  
2021 ◽  
Vol 68 (1) ◽  
pp. 2
Author(s):  
Arash M. Shahidi ◽  
Theodore Hughes-Riley ◽  
Carlos Oliveira ◽  
Tilak Dias

Knitted electrodes are a key component to many electronic textiles including sensing devices, such as pressure sensors and heart rate monitors; therefore, it is essential to assess the electrical performance of these knitted electrodes under different mechanical loads to understand their performance during use. The electrical properties of the electrodes could change while deforming, due to an applied load, which could occur in the uniaxial direction (while stretched) or multiaxial direction (while compressed). The properties and performance of the electrodes could also change over time when rubbed against another surface due to the frictional force and generated heat. This work investigates the behavior of a knitted electrode under different loading conditions and after multiple abrasion cycles.


2021 ◽  
pp. 102986492110254
Author(s):  
Roger Chaffin ◽  
Jane Ginsborg ◽  
James Dixon ◽  
Alexander P. Demos

To perform reliably and confidently from memory, musicians must able to recover from mistakes and memory failures. We describe how an experienced singer (the second author) recovered from mistakes and gaps in recall as she periodically recalled the score of a piece of vocal music that she had memorized for public performance, writing out the music six times over a five-year period following the performance. Five years after the performance, the singer was still able to recall two-thirds of the piece. When she made mistakes, she recovered and went on, leaving gaps in her written recall that lengthened over time. We determined where in the piece gaps started ( losses) and ended ( gains), and compared them with the locations of structural beats (starts of sections and phrases) and performance cues ( PCs) that the singer reported using as mental landmarks to keep track of her progress through the piece during the sung, public performance. Gains occurred on structural beats where there was a PC; losses occurred on structural beats without a PC. As the singer’s memory faded over time, she increasingly forgot phrases that did not start with a PC and recovered at the starts of phrases that did. Our study shows how PCs enable musicians to recover from memory failures.


2021 ◽  
Vol 18 (2) ◽  
pp. 1-17
Author(s):  
Shannon P. Devlin ◽  
Jennifer K. Byham ◽  
Sara Lu Riggs

Changes in task demands can have delayed adverse impacts on performance. This phenomenon, known as the workload history effect, is especially of concern in dynamic work domains where operators manage fluctuating task demands. The existing workload history literature does not depict a consistent picture regarding how these effects manifest, prompting research to consider measures that are informative on the operator's process. One promising measure is visual attention patterns, due to its informativeness on various cognitive processes. To explore its ability to explain workload history effects, participants completed a task in an unmanned aerial vehicle command and control testbed where workload transitioned gradually and suddenly. The participants’ performance and visual attention patterns were studied over time to identify workload history effects. The eye-tracking analysis consisted of using a recently developed eye-tracking metric called coefficient K , as it indicates whether visual attention is more focal or ambient. The performance results found workload history effects, but it depended on the workload level, time elapsed, and performance measure. The eye-tracking analysis suggested performance suffered when focal attention was deployed during low workload, which was an unexpected finding. When synthesizing these results, they suggest unexpected visual attention patterns can impact performance immediately over time. Further research is needed; however, this work shows the value of including a real-time visual attention measure, such as coefficient K , as a means to understand how the operator manages varying task demands in complex work environments.


Author(s):  
Roberto Dieci ◽  
Xue-Zhong He

AbstractThis paper presents a stylized model of interaction among boundedly rational heterogeneous agents in a multi-asset financial market to examine how agents’ impatience, extrapolation, and switching behaviors can affect cross-section market stability. Besides extrapolation and performance based switching between fundamental and extrapolative trading documented in single asset market, we show that a high degree of ‘impatience’ of agents who are ready to switch to more profitable trading strategy in the short run provides a further cross-section destabilizing mechanism. Though the ‘fundamental’ steady-state values, which reflect the standard present-value of the dividends, represent an unbiased equilibrium market outcome in the long run (to a certain extent), the price deviation from the fundamental price in one asset can spill-over to other assets, resulting in cross-section instability. Based on a (Neimark–Sacker) bifurcation analysis, we provide explicit conditions on how agents’ impatience, extrapolation, and switching can destabilize the market and result in a variety of short and long-run patterns for the cross-section asset price dynamics.


2016 ◽  
Vol 848 ◽  
pp. 726-732 ◽  
Author(s):  
Rong Liu ◽  
Yan Wang ◽  
Jing Zhu ◽  
Zu Ming Hu ◽  
Jun Rong Yu

The effects of Modified NanoSiO2 Agents on the morphology and performance of ultra-high-molecular weight polyethylene (UHMWPE) microporous membranes via thermally induced phase separation were investigated in this work. The NanoSiO2 was surface modified by silane coupling agent KH570 (KH570-NanoSiO2). Differential scanning calorimetry (DSC) and X-Ray Diffraction (XRD) were performed to obtain crystallization of UHMWPE/white oil/ KH570-NanoSiO2 doped system. The morphology and performance of the prepared UHMWPE microporous membranes were characterized with scanning electron microscopy (SEM) and microfiltration experiments. The results showed that the morphology of UHMWPE membrane could be disturbed by KH570-NanoSiO2. Porosity and the rejection of Bovine serum albumin (BSA) of the blend membrane increased with increasing concentration of Modified NanoSiO2, while the water flux slightly decreased.


2011 ◽  
Vol 15 ◽  
pp. 21-24
Author(s):  
Kelly Smith ◽  
R. Brazendale

Pasture persistence and performance, and associated issues such as black beetle, are of central concern to dairy farmers. The Pasture Renewal Survey 2010 aimed to better understand farmers' confidence in their ability to make informed decisions on their pasture renewal practices, their satisfaction with the success of this decision-making and the performance of their renewed pastures over time. In addition, the survey investigated their attitudes to information sources and what barriers they saw to improving pasture performance on farm. A postal and online survey elicited responses from 776 dairy farmers in the Waikato and Bay of Plenty regions. The four main findings of the work were: 1. Farmers are more confident of their ability to make appropriate on-farm management decisions for renewed pasture than they are of their ability to choose appropriate cultivars and endophyte. 2. Farmers, while generally satisfied with their own success in renewing pasture, reported decreasing levels of satisfaction with renewed pastures over the 3 successive years following renewal. 3. Farmers do not rate information sources very highly in terms of their usefulness in relation to pasture renewal. 4. Weather-related issues and pest-related issues (particularly black beetle) were the most commonly identified barriers to improving pasture performance. Keywords: farmer confidence, farmer satisfaction, information sources, pasture renewal.


2021 ◽  
Author(s):  
Océane Gilibert ◽  
Dan Tam Costa ◽  
Sabine Sauvage ◽  
Didier Orange ◽  
Yvan Capowiez ◽  
...  

<p>Wetlands are known for their natural service of water quality regulation. The hyporheic zones of the rivers filter and purify the surface water from the stream and infiltrated waters in soil nearby through the riparian zone. This purification service occurs because of a synergy between the substrate and its biodiversity (including plants, bacteria and other invertebrates). Our study deals with constructed wetlands (CW) as a nature-based solution mimicking wetlands water purification process, to purify wastewaters. The REUSE technology of CW is based on the use of specific layers of gravels and sands inside a close concrete structure, planted with specific sub-aquatic plants, where wastewaters or runoff of stormwaters are introduced to be filtered. The technology of Vertical Flow Constructed Wetlands (VFCW) reproduces the water flux observed in the riparian zone with a gravity flow of water. It is composed of reeds planted on a sandy layer (Ø 0-4 mm) and succession of gravel layers. This substrate can be saturated or unsaturated to reproduce the functioning of the hyporheic zone or the riparian zone respectively. By the time, the substrate is colonized by a community of bacteria producing biofilms which capture the residual organic matter from wastewaters to mineralize them. However, the VFCW substrates tend to clog over time due to the accumulation of organic matter and biofilms. Many studies consider earthworms as one of the solutions to alleviate this clogging, thanks to their burrows recreating macropores and preferential channels which help to improve the dispersion of water into the deep soil. The main goal of this study is to assess the impact of earthworm activities on the hydraulic conductivity of columns composed with the same substrate used in the VFCW. Different densities of earthworms (Eisenia fetida) were introduced (0, 100, 500, 1000 g of earthworms/m²) in these columns to be monitored for 37 days. The hydraulic conductivity was measured every 7 days, aside from day 23 with the addition of 40 g of peat bedding on column surfaces to simulate a high organic matter input. Columns with earthworm density superior to 500 g/m² shows an amelioration of their hydraulic conductivity after 21 days. These densities are also able to restore the hydraulic conductivity of the column in less than 7 days after the setting of clogged condition due to the organic matter input (peat bedding) at the sediment surface. This study showed that the burrowing activity of E. fetida improves the hydraulic flux of a sandy substrate and this impact is dependent on the earthworm density introduced. So, the addition of earthworms in the VFCW could serve as a prevention against clogging.</p>


2017 ◽  
Vol 79 (1-2) ◽  
Author(s):  
Siti Khadijah Hubadillah ◽  
Mohd Hafiz Dzarfan Othman ◽  
A. F. Ismail ◽  
Mukhlis A. Rahman ◽  
Juhana Jaafar

Ceramic hollow fibre membrane (CHFM) demonstrated superior characteristics and performance in any separation application. The only problem associated with this kind of technology is the high cost. In order to effectively fabricate and produce low cost porous CHFM, a series of CHFMs made of kaolin were fabricated via combined phase inversion and sintering technique. The CHFMs from kaolin named as kaolin hollow fibre membranes (KHFMs) were studied at different kaolin contents of 35 wt.%, 37.5 wt.% and 40 wt.% sintered at 1200ºC. The result indicated that by varying kaolin contents, different morphologies were obtained due to changes in the viscosity of ceramic suspension containing kaolin. The optimum kaolin content for KHFM was identified. It was found that KHFM prepared at 37.5 wt% has a mechanical strength and pure water flux of A and B respectively.  


Sign in / Sign up

Export Citation Format

Share Document