scholarly journals Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission

Research ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Jian Gu ◽  
Bingbing Yue ◽  
Glib V. Baryshnikov ◽  
Zhongyu Li ◽  
Man Zhang ◽  
...  
Keyword(s):  
Material Processing ◽  
Small Molecules ◽  
Self Assembly ◽  
Chemical Structure ◽  
Molecular Conformation ◽  
Dynamic Change ◽  
Fold Increase ◽  
Aggregation Induced Emission ◽  
Solvent Processing

Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to ~200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.

In situ visualizable self-assembly, aggregation-induced emission and circularly polarized luminescence of tetraphenylethene and alanine-based chiral polytriazole

2018 ◽  
Vol 6 (17) ◽  
pp. 4807-4816 ◽  
Author(s):  
Qiuming Liu ◽  
Qing Xia ◽  
Shuo Wang ◽  
Bing Shi Li ◽  
Ben Zhong Tang
Keyword(s):  
Self Assembly ◽  
Circularly Polarized ◽  
Aggregation Induced Emission ◽  
Circularly Polarized Luminescence ◽  
Polarized Luminescence ◽  
Water Contents

The AIE chiral polytriazole has the capacity to self-assemble into diverse fluorescent nano/micro architectures at different water contents and polymer concentrations.

Direct visualization and real-time monitoring of dissipative self-assembly by synchronously coupled aggregation-induced emission

2017 ◽  
Vol 1 (12) ◽  
pp. 2651-2655 ◽  
Author(s):  
Wen-Chao Geng ◽  
Yan-Cen Liu ◽  
Zhe Zheng ◽  
Dan Ding ◽  
Dong-Sheng Guo
Keyword(s):  
Real Time ◽  
Self Assembly ◽  
Direct Visualization ◽  
Real Time Monitoring ◽  
Aggregation Induced Emission

Dissipative self-assembly was clearly visualized and real-time monitored throughin situintrinsic aggregation-induced emission fluorescence only in the assembly state.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Probing the Dynamic Self-Assembly Behaviour of Photoswitchable Wormlike Micelles in Real Time

2018 ◽  
Author(s):  
Elaine A. Kelly ◽  
Judith E. Houston ◽  
Rachel Evans
Keyword(s):  
Real Time ◽  
Absorption Spectroscopy ◽  
Self Assembly ◽  
Uv Light ◽  
Wormlike Micelles ◽  
Tetraethylene Glycol ◽  
Light Illumination ◽  
First Time ◽  
Dependent Processes

Understanding the dynamic self-assembly behaviour of azobenzene photosurfactants (AzoPS) is crucial to advance their use in controlled release applications such as<i></i>drug delivery and micellar catalysis. Currently, their behaviour in the equilibrium <i>cis-</i>and <i>trans</i>-photostationary states is more widely understood than during the photoisomerisation process itself. Here, we investigate the time-dependent self-assembly of the different photoisomers of a model neutral AzoPS, <a>tetraethylene glycol mono(4′,4-octyloxy,octyl-azobenzene) </a>(C<sub>8</sub>AzoOC<sub>8</sub>E<sub>4</sub>) using small-angle neutron scattering (SANS). We show that the incorporation of <i>in-situ</i>UV-Vis absorption spectroscopy with SANS allows the scattering profile, and hence micelle shape, to be correlated with the extent of photoisomerisation in real-time. It was observed that C<sub>8</sub>AzoOC<sub>8</sub>E<sub>4</sub>could switch between wormlike micelles (<i>trans</i>native state) and fractal aggregates (under UV light), with changes in the self-assembled structure arising concurrently with changes in the absorption spectrum. Wormlike micelles could be recovered within 60 seconds of blue light illumination. To the best of our knowledge, this is the first time the degree of AzoPS photoisomerisation has been tracked <i>in</i><i>-situ</i>through combined UV-Vis absorption spectroscopy-SANS measurements. This technique could be widely used to gain mechanistic and kinetic insights into light-dependent processes that are reliant on self-assembly.

In situ Time-Resolved Small-Angle X-ray Scattering Reveals the Formation Kinetics of Polyelectrolyte Complex Micelles

2019 ◽  
Author(s):  
Hao Wu ◽  
Jeffrey Ting ◽  
Siqi Meng ◽  
Matthew Tirrell
Keyword(s):  
Small Angle ◽  
Self Assembly ◽  
Electrostatic Interactions ◽  
Polyelectrolyte Complex ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
Kinetics Of ◽  
Ray Scattering

We have directly observed the <i>in situ</i> self-assembly kinetics of polyelectrolyte complex (PEC) micelles by synchrotron time-resolved small-angle X-ray scattering, equipped with a stopped-flow device that provides millisecond temporal resolution. This work has elucidated one general kinetic pathway for the process of PEC micelle formation, which provides useful physical insights for increasing our fundamental understanding of complexation and self-assembly dynamics driven by electrostatic interactions that occur on ultrafast timescales.

Enzyme-Instructed Self-assembly in Biological Milieu for Theranostics Purpose

2019 ◽  
Vol 26 (8) ◽  
pp. 1351-1365 ◽  
Author(s):  
Zhentao Huang ◽  
Qingxin Yao ◽  
Simin Wei ◽  
Jiali Chen ◽  
Yuan Gao
Keyword(s):  
Small Molecules ◽  
Precision Medicine ◽  
Self Assembly ◽  
Public Healthcare ◽  
Enzymatic Conversion ◽  
Vaccine Adjuvants ◽  
New Paradigm ◽  
Cancer Treatments ◽  
The Past ◽  
Biological Milieu

Precision medicine is in an urgent need for public healthcare. Among the past several decades, the flourishing development in nanotechnology significantly advances the realization of precision nanomedicine. Comparing to well-documented nanoparticlebased strategy, in this review, we focus on the strategy using enzyme instructed selfassembly (EISA) in biological milieu for theranostics purpose. In principle, the design of small molecules for EISA requires two aspects: (1) the substrate of enzyme of interest; and (2) self-assembly potency after enzymatic conversion. This strategy has shown its irreplaceable advantages in nanomedicne, specifically for cancer treatments and Vaccine Adjuvants. Interestingly, all the reported examples rely on only one kind of enzymehydrolase. Therefore, we envision that the application of EISA strategy just begins and will lead to a new paradigm in nanomedicine.

Computational and Experimental Binding Mechanism of DNA-drug Interactions

2019 ◽  
Vol 24 (32) ◽  
pp. 3739-3757 ◽  
Author(s):  
Chandrabose Selvaraj ◽  
Sanjeev K. Singh
Keyword(s):  
Small Molecules ◽  
Self Assembly ◽  
Genetic Material ◽  
Dna Interaction ◽  
Significant Feature ◽  
Drug Molecules ◽  
Potential Applications ◽  
Novel Drug ◽  
Groove Binders ◽  
Molecular Docking And Dynamics

Nucleic acid is the key unit and a predominant genetic material for interpreting the fundamental basis of genetic information in an organism and now it is used for the evolution of a novel group of therapeutics. To identify the potential impact on the biological science, it receives high recognition in therapeutic applications. Due to its selective recognition of molecular targets and pathways, DNA significantly imparts tremendous specificity of action. Examining the properties of DNA holds numerous advantages in assembly, interconnects, computational elements, along with potential applications of DNA self-assembly and scaffolding include nanoelectronics, biosensors, and programmable/autonomous molecular machines. The interaction of low molecular weight, small molecules with DNA is a significant feature in pharmacology. Based on the mode of binding mechanisms, small molecules are categorized as intercalators and groove binders having a significant role in target-based drug development. The understanding mechanism of drug-DNA interaction plays an important role in the development of novel drug molecules with more effective and lesser side effects. This article attempts to outline those interactions of drug-DNA with both experimental and computational advances, including ultraviolet (UV) -visible spectroscopy, fluorescent spectroscopy, circular dichroism, nuclear magnetic resonance (NMR), molecular docking and dynamics, and quantum mechanical applications.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

Sign in / Sign up

Export Citation Format

Share Document