Mechanical treatment of wastewater

2021 ◽  
pp. 46-49
Author(s):  
В. Браннер ◽  
Д.А. Калачев
Keyword(s):  
Wastewater Treatment ◽  
Mechanical Treatment ◽  
Two Dimensional ◽  
Retention Efficiency ◽  
One Dimensional ◽  
New Construction ◽  
Treatment Facilities ◽  
Technical Solutions ◽  
Efficiency And Reliability ◽  
Selection Of

Подбор оборудования для механической очистки сточных вод является важным этапом при реконструкции или новом строительстве очистных сооружений, который определяет их эффективность и надежность с точки зрения технологии и эксплуатации. Приведены примеры распространенных на данный момент технических решений по конструкции фильтрующего полотна решеток для механической очистки сточных вод. Дано сравнение эффективности данных решений. На основе исследования очистных сооружений в Германии представлено сравнение эффективности задержания отбросов в зависимости от применяемого ранга фильтрации: двумерной (перфорация) и одномерной (прозор). The selection of equipment for mechanical wastewater treatment is an important stage in the reconstruction or new construction of the treatment facilities that determines their efficiency and reliability in terms of the technology and operation. The examples of the currently widespread technical solutions for designing filtering cloth of the screens for mechanical wastewater treatment are given. The effectiveness of these solutions is compared. On the basis of studying wastewater treatment facilities in Germany, a comparison of the debris retention efficiency depending on the applied filtration grade, i. e., two-dimensional (perforation) and one-dimensional (bar spacing) is presented.

Function Extrapolation at One Inaccessible Point Using Converging Lines

2015 ◽  
Author(s):  
Yiming Zhang ◽  
Nam Ho Kim ◽  
Chanyoung Park ◽  
Raphael T. Haftka
Keyword(s):  
Drag Coefficient ◽  
Prediction Accuracy ◽  
Main Idea ◽  
Bayesian Theory ◽  
High Dimensional ◽  
Coefficient Function ◽  
Two Dimensional ◽  
Post Processing ◽  
One Dimensional ◽  
Selection Of

Focus of this paper is on the prediction accuracy of multidimensional functions at an inaccessible point. The paper explores the possibility of extrapolating a high-dimensional function using multiple one-dimensional converging lines. The main idea is to select samples along lines towards the inaccessible point. Multi-dimensional extrapolation is thus transformed into a series of one-dimensional extrapolations that provide multiple estimates at the inaccessible point. We demonstrate the performance of converging lines using Kriging to extrapolate a two-dimensional drag coefficient function. Post-processing of extrapolation results from different lines based on Bayesian theory is proposed to combine the multiple predictions. Selection of lines is also discussed. The method of converging lines proves to be more robust and reliable than two-dimensional Kriging surrogate for the example.

scholarly journals A lowpass filter based on a 2d microstrip electromagnetic crystal

2019 ◽  
Vol 485 (1) ◽  
pp. 27-32
Author(s):  
B. A. Belyaev ◽  
S. A. Khodenkov ◽  
R. G. Galeev ◽  
V. F. Shabanov
Keyword(s):  
Numerical Simulation ◽  
Personal Computer ◽  
3D Model ◽  
Two Dimensional ◽  
Lowpass Filter ◽  
Parametric Synthesis ◽  
One Dimensional ◽  
New Construction ◽  
Electromagnetic Crystal ◽  
Microstrip Structure

A new construction of a lowpass filter was developed based on a two-dimensional microstrip electromagnetic crystal, which had a steeper slope of the frequency response as compared to a filter consisting of a one-dimensional microstrip electromagnetic crystal. The investigated lowpass filter construction is characterized by a high workability and ease of manufacturing. Electrodynamic numerical simulation of the 3D model of the considered microstrip structure agrees well with the experiment, which allows conducting parametric synthesis of devices with the required properties using a personal computer.

scholarly journals Modern methods for surface wastewater treatment

2018 ◽  
Vol 178 ◽  
pp. 09020
Author(s):  
Oleg Primin ◽  
Galina Varyushina
Keyword(s):  
Wastewater Treatment ◽  
Large Scale ◽  
Wastewater Treatment Plants ◽  
Local Treatment ◽  
Sewage Water ◽  
Technological Parameters ◽  
Surface Water Treatment ◽  
State Of Water ◽  
Treatment Facilities ◽  
Technical Solutions

The article gives the characteristics of the system of removal and purification of surface wastewater in Moscow. One of the features of this system is the large-scale use of hydrographic network of the city as elements of the drainage network. Currently improvement of the ecological state of water objects is only possible if to reduce anthropogenic load on them and watersheds, to recover self-cleaning abilities of water bodies and the to protect groundwater from contamination. The article reveals results of research, and contains technological parameters for facilities of surface sewage water purification and recommendations to improve their operation. Article also gives technical solutions to upgrade operated wastewater treatment systems and to ensure the achievement of required standards of treatment of surface runoff when dilution in water. Along with proposals for the reconstruction and construction of wastewater treatment plants with the classical technology of surface water treatment, it is necessary to consider the principle of decentralization with the use of local treatment facilities.

A one-dimensional self-gravitating stellar gas

1966 ◽  
Vol 25 ◽  
pp. 46-48 ◽  
Author(s):  
M. Lecar
Keyword(s):  
Gravitational Field ◽  
Phase Space ◽  
Motion Picture ◽  
Space Distribution ◽  
Two Dimensional ◽  
One Dimensional ◽  
Phase Space Distribution ◽  
Dimensional Phase Space ◽  
The Mean

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.

Bridging the Gap between Quantitative and Qualitative Historical Research: an application of multiple regression analysis and homogeneity analysis with alternating least squares

1996 ◽  
Vol 8 (3) ◽  
pp. 133-144 ◽  
Author(s):  
María del Mar del Pozo Andrés ◽  
Jacques F A Braster
Keyword(s):  
Least Squares ◽  
Multiple Regression ◽  
Historical Research ◽  
Alternating Least Squares ◽  
Categorical Variables ◽  
Two Dimensional ◽  
Homogeneity Analysis ◽  
Regression Approach ◽  
Dimensional Picture ◽  
Selection Of

In this article we propose two research techniques that can bridge the gap between quantitative and qualitative historical research. These are: (1) a multiple regression approach that gives information about general patterns between numerical variables and the selection of outliers for qualitative analysis; (2) a homogeneity analysis with alternating least squares that results in a two-dimensional picture in which the relationships between categorical variables are graphically presented.

Технологические аспекты обезвоживания осадков промышленно-дождевых сточных вод автотранспортных предприятий

2019 ◽  
pp. 25-30
Author(s):  
G. Variushina
Keyword(s):  
Wastewater Treatment ◽  
Moisture Content ◽  
Vacuum Filter ◽  
Operational Parameters ◽  
Technological Parameters ◽  
Wastewater Treatment Process ◽  
Motor Transport ◽  
Cationic Flocculant ◽  
Residual Sludge ◽  
Treatment Facilities

Приводятся сведения об условиях формирования, объемах, химическом составе и свойствах осадков очистных сооружений производственных сточных вод автотранспортных предприятий. Даны примеры технологических решений по обезвоживанию образующихся в процессе очистки шламов. Рассмотрены технологические аспекты процесса интенсификации механического обезвоживания уплотненных осадков с использованием высокомолекулярных полиэлектролитов. Представлены данные лабораторных экспериментов по выбору типа флокулянта, его дозы, технологических параметров процесса, а также результаты определения влажности обезвоженных осадков, полученные на модели барабанного вакуум-фильтра. Приведены примеры эффективных обезвоживающих аппаратов отечественного производства и их технические характеристики, рекомендации и критерии их выбора, а также факторы, оказывающие влияние на эксплуатационные параметры обезвоживающего оборудования. Установлено, что наилучшая обезвоживающая способность барабанных вакуум-фильтров (остаточная влажность шламов от 66 до 83) может быть достигнута при применении катионного флокулянта ВПК-402 для осадков различных производственных цехов автотранспортного предприятия.Information on the conditions of generation, volumes, chemical composition and properties of sludge generated at the industrial wastewater treatment facilities of motor transport enterprises is provided. Examples of process engineering solutions for dewatering sludge generated during the wastewater treatment process are given. The technological aspects of enhancing mechanical dewatering of thickened sludge using high-molecular polyelectrolytes are considered. The data of laboratory experiments on choosing the type of flocculant, its dose, technological parameters of the process, as well as the results of determining the moisture content of dewatered sludge obtained in a model of a drum vacuum filter are presented. Examples of effective domestically produced dewatering apparatus and their technical characteristics, recommendations and criteria for their selection, as well as factors influencing the operational parameters of the dewatering equipment are given. It is found that the highest dewatering capacity of drum vacuum filters (residual sludge moisture content from 66 to 83) can be achieved by using VPK-402 cationic flocculant for processing sludge generated at the workshop premises of a motor transport enterprise.

Обезвреживание поверхностного стока – важный вклад в охрану водных объектов

2019 ◽  
pp. 48-54
Author(s):  
G. Variushina
Keyword(s):  
Wastewater Treatment ◽  
Russian Federation ◽  
Surface Runoff ◽  
Commercial Fishing ◽  
Research Activity ◽  
Educational Work ◽  
Industrial Enterprises ◽  
Retention Basin ◽  
Treatment Facilities ◽  
The Russian Federation

Приводятся сведения о разработанных специалистами АО МосводоканалНИИпроект научных исследованиях и проектных решениях в области очистки поверхностных сточных вод с территории Москвы, причинах загрязнения водоисточников неочищенными поверхностными стоками в 1970х годах. Представлены основные характеристики комплексов глубокой очистки поверхностных стоков, разработанных проектов очистных сооружений для промышленных предприятий с площадью водосбора 0,3 1 5 10 и 15 га. Показано, что эффективность очистки поверхностных сточных вод соответствует требованиям, предъявляемым к водоемам рыбохозяйственного значения. При этом для обезвоживания осадка, образующегося в накопительном резервуаре очистных сооружений, в технологической схеме предусмотрена песковая площадка, а для сбора плавающих нефтепродуктов нефтеразделитель. Новизна разработанной технологии обезвреживания поверхностного стока и обработки осадка была подтверждена пятью патентами РФ, одобрена Госстроем РФ, Центральным управлением по рыбохозяйственной экспертизе и нормативам по сохранению, воспроизводству водных биологических ресурсов и акклиматизации, Городской санитарной службой Москвы и области, службами Москомприроды и Мосгосэкспертизы. Показан вклад специалистов лаборатории обработки природных, промышленнодождевых сточных вод и осадка в решение проблем очистки поверхностного стока. Приведена информация об истории развития и перспективных направлениях научной деятельности лаборатории, ее планах в организационнометодической и воспитательной работе с молодыми специалистами.Information on the research and design solutions developed by the experts of MosvodokanalNIIproject JSC in the field of surface runoff treatment from the territory of Moscow, the causes of water sources pollution with raw surface runoff in the 1970s. The basic characteristics of the complexes for the enhanced treatment of surface runoff, the developed projects of wastewater treatment facilities for industrial enterprises with a catchment area of 0.3 1 5 10 and 15 ha. It is shown that the effectiveness of surface runoff treatment meets the requirements to water bodies of commercial fishing importance. At the same time, for dewatering of sludge generated in the retention basin of wastewater treatment facilities, a grit dewatering bay is included into the process flow scheme, and an oil separator is used to collect floating oil products. The novelty of the developed technology for neutralization of surface runoff and sludge treatment has been acknowledged by five patents of the Russian Federation, approved by Gosstroy of the Russian Federation, the Central Department of Fisheries Examination and Review and Protection and Renewal and Acclimatization Standards, the Moscow City and Moscow Region Sanitary Service, Moskompriroda and Mosgosekspertiza services. The contribution of the research workers of the laboratory for the treatment of natural, industrialstorm wastewater and sludge processing to the solution of problems of surface runoff treatment is demonstrated. The information about the history of development and promising areas of research activity of the laboratory, its plans in the organizational, methodological and educational work with young professionals is given.

Sign in / Sign up

Export Citation Format

Share Document