scholarly journals Pemantauan Apnea Berbasis Internet of Things dengan Notifikasi di Mobilephone

2020 ◽  
Vol 13 (2) ◽  
pp. 81-90
Author(s):  
Muhammad Fuad Nurillah ◽  
Bambang Guruh Irianto ◽  
I Dewa Gede Hari Wisana
Keyword(s):  
Sleep Apnea ◽  
Internet Of Things ◽  
Patient Monitoring ◽  
Test Results ◽  
Turn On ◽  
Monitoring Process ◽  
Apnea Monitoring ◽  
Loss Data ◽  
Monitoring Devices ◽  
The Internet Of Things

Penderita gangguan henti napas pada saat tidur (sleep apnea) semakin meningkat, hampir lebih dari 80% orang menderita gangguan ini tidak terdiagnosis. Gejala dari sleep apnea yaitu terjadinya henti napas selama lebih dari 10 detik. Tujuan dari penelitian ini adalah merancang alat monitor apnea agar dapat mendeteksi gejala sleep apnea. Kontribusi dalam penelitian ini adalah sistem monitoring atau pemantauan jarak jauh sehingga orang lain dapat memantau kondisi pasien meskipun tidak sedang mendampinginya. Agar dapat mempermudah proses monitoring dan pendiagnosaan pasien maka dibuatlah alat apnea monitor berbasis Internet of Things dengan dilengkapi notifikasi pada android sehingga dapat dengan cepat dilakukannya penanganan pada pasien. Perancangan alat ini menggunakan piezoelektrik sebagai sensor pendeteksi pernapasan yang diletakkan pada bagian perut pasien. Output sensor berupa tegangan kemudian dikondisikan pada rangkaian PSA. Menggunakan mikrokontroler ESP32 sebagai pemrosesan sinyal yang dibentuk oleh rangkaian PSA dan diolah menjadi nilai respirasi. Nilai respirasi kemudian dikirimkan ke perangkat android menggunakan jaringan Wi-Fi dan ditampilkan pada aplikasi Blynk. Apabila terdeteksi kejadian henti napas selama lebih dari 10 detik maka alat akan menyalakan indikator dan mengaktifkan notifikasi pada android. Penelitian ini melakukan pengukuran amplitudo sinyal respirasi dan nilai respirasi terhadap responden dan juga melakukan pengujian pengiriman jarak jauh menggunakan jaringan Wi-Fi. Hasil pengujian pada penelitian ini alat dapat mengirimkan data dengan baik dan tanpa loss data dengan jarak 5 meter dalam ruangan dan 10 meter berbeda ruangan. Alat ini dapat diimplementasikan pada proses monitoring pasien sehingga dapat mengurangi penderita gangguan sleep apnea. Patients with breathing problems during sleep (sleep apnea) are increasing, almost more than 80% of people suffering from this disorder are not diagnosed. Symptoms of sleep apnea include breathing for more than 10 seconds. The purpose of this study is to design apnea monitoring devices to detect sleep apnea symptoms. The contribution in this study is a monitoring system or remote monitoring so that others can monitor the condition of the patient even though not accompanying him. In order to simplify the process of monitoring and diagnosing patients, an apnea monitor based on the Internet of Things is made with notifications on android so that treatment can be quickly performed on patients. The design of this device uses piezoelectric as a respiratory detection sensor which is placed on the patient's abdomen. The sensor output in the form of voltage is then conditioned on the PSA circuit. Using the ESP32 microcontroller as signal processing which is formed by the PSA circuit and processed into respiration values. Respiration values ​​are then sent to the Android device using a Wi-Fi network and displayed on the Blynk app If a stop breathing event is detected for more than 10 seconds, the device will turn on the indicator and activate the notification on the android. The test results in this study the tool can send data properly and without loss data with a distance of 5 meters in a room and 10 meters in a different room. This tool can be implemented in the patient monitoring process so that it can reduce sufferers of sleep apnea disorders.

Smartphone Based Respiratory Signal monitoring and Apnea detection Via Bluetooth Comunication

2021 ◽  
Vol 14 (2) ◽  
pp. 49-55
Author(s):  
Ulil Albhi Ramadhani ◽  
I Dewa Gede Hari Wisana ◽  
Priyambada Cahya Nugraha
Keyword(s):  
Sleep Apnea ◽  
Patient Monitoring ◽  
Piezoelectric Sensor ◽  
Respiratory Arrest ◽  
Test Results ◽  
Data Loss ◽  
Monitoring Process ◽  
Respiratory Signal ◽  
Calculation Results ◽  
Monitor Device

Patients with sleep apnea (sleep apnea) are increasing, almost more than 80% of people with this disorder are undiagnosed. Symptoms of sleep apnea are stopping breathing for more than 10 seconds. The purpose of this study was to design an apnea monitor device in order to detect symptoms of sleep apnea. The contribution in this study is a monitoring system or remote monitoring so that other people can monitor the patient's condition even though they are not accompanying him. In order to facilitate the process of monitoring and diagnosing patients, a Apnea Monitor Based on Bluetooth with Signal Display in Android with a delivery system via a bluetooth network that displays respiratory signals on Android so that patients can be treated quickly when breathing stops (apnea) . The design of this device uses a piezoelectric sensor to detect breathing which is placed on the patient's abdomen. The sensor output in the form of voltage is then conditioned on the PSA circuit. Using the ESP32 microcontroller as a signal processing which is formed by the PSA circuit and processed into a signal and respiration value. The respiration signal and value are then sent to the android device using the Bluetooth network. When a respiratory arrest is detected for more than 10 seconds, the device will turn on the indicator and buzzeer on the device and also send a warning to the Android or Roboremo application in the form of a notification "Apnea!" and a beep sound as a reminder when there is apnea in the patient so that the user can immediately take action on the patient. The test in this study there are 5 respondents who have been tested on this module by comparing the respiration rate per minute with the Patient Monitor, and the test results in this study obtained the measurement and calculation results, the lowest error value was 1.58% and the highest error value was 2.9%, the module can also transmit data well and without data loss with a distance of 10 meters in the room and 5 meters in different rooms. This module can be implemented in the patient monitoring process so that it can reduce sufferers of sleep apnea disorders. the module can also transmit data well and without data loss with a distance of 10 meters in the room and 5 meters in different rooms. This module can be implemented in the patient monitoring process so that it can reduce sufferers of sleep apnea disorders. the module can also transmit data well and without data loss with a distance of 10 meters in the room and 5 meters in different rooms. This module can be implemented in the patient monitoring process so that it can reduce sufferers of sleep apnea disorders.

Inconsistency Detection-Based LOD in Smart Homes

2021 ◽  
Vol 17 (4) ◽  
pp. 56-75
Author(s):  
Wassila Guebli ◽  
Abdelkader Belkhir
Keyword(s):  
Internet Of Things ◽  
Open Data ◽  
Smart Homes ◽  
The Internet ◽  
Home Network ◽  
Air Conditioner ◽  
Network Infrastructure ◽  
Sound System ◽  
Turn On ◽  
The Internet Of Things

The emergence of the internet of things in the smart homes has given rise to many services to meet the user's expectations. It is possible to control the temperature, the brightness, the sound system, and even the security of the house via a smartphone, at the request of the inhabitant or by scheduling it. This growing number of “things” must deal with material constraints such as home network infrastructure, but also applicative due to the number of proposed services. The heterogeneity of users' preferences often creates conflicts between them like turn on and off light or using a heater and an air conditioner in the same time. To manage these conflicts, the authors proposed a solution based on linked open data (LOD). The LOD allows defining the relation between the different services and things in the house and a better exploitation of the attributes of the inhabitant's profile and services. It consists to find inconsistency relation between the equipment using the antonym thesaurus.

scholarly journals A Hybrid Energy Harvesting Design for On-Body Internet-of-Things (IoT) Networks

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 407 ◽  
Author(s):  
Omar A. Saraereh ◽  
Amer Alsaraira ◽  
Imran Khan ◽  
Bong Jun Choi
Keyword(s):  
Energy Harvesting ◽  
Internet Of Things ◽  
Thermal Energy ◽  
The Internet ◽  
Healthcare Applications ◽  
Hybrid Energy ◽  
Iot Devices ◽  
Hybrid Energy Harvesting ◽  
Monitoring Devices ◽  
The Internet Of Things

The Internet-of-things (IoT) has been gradually paving the way for the pervasive connectivity of wireless networks. Due to the ability to connect a number of devices to the Internet, many applications of IoT networks have recently been proposed. Though these applications range from industrial automation to smart homes, healthcare applications are the most critical. Providing reliable connectivity among wearables and other monitoring devices is one of the major tasks of such healthcare networks. The main source of power for such low-powered IoT devices is the batteries, which have a limited lifetime and need to be replaced or recharged periodically. In order to improve their lifecycle, one of the most promising proposals is to harvest energy from the ambient resources in the environment. For this purpose, we designed an energy harvesting protocol that harvests energy from two ambient energy sources, namely radio frequency (RF) at 2.4 GHz and thermal energy. A rectenna is used to harvest RF energy, while the thermoelectric generator (TEG) is employed to harvest human thermal energy. To verify the proposed design, extensive simulations are performed in Green Castalia, which is a framework that is used with the Castalia simulator in OMNeT++. The results show significant improvements in terms of the harvested energy and lifecycle improvement of IoT devices.

scholarly journals IoTbased smart and flexible lightning in streets

2018 ◽  
Vol 7 (2.8) ◽  
pp. 291 ◽  
Author(s):  
Raju Anitha ◽  
M Nishitha ◽  
K Akhila ◽  
K Sai Anusha ◽  
G Srilekha
Keyword(s):  
Internet Of Things ◽  
Embedded System ◽  
Voice Recognition ◽  
The Internet ◽  
The Real ◽  
Emergency Situations ◽  
Turn On ◽  
Energy Consumptions ◽  
The Internet Of Things

The internet of Things (IOT) is always giving unprecedented answers for the customary issues looked by man.One of the real obstacles in city is we are spending huge expenses on street light.  To control the street lights based on detection of sunlight by implemented with smart embedded system. The paper is mainly utilized for smart and climate adaptive lighting in street lights. The street lights are automatically ON during the evening time and automatically OFF during day time.The street light can be accessed to turn ON or OFF at anyplace and anytime through web.In addition to that On top of the street light we are placing camera to track the activities performed on the street and where the recordings are stored in a server. Furthermore a panic button is placed on the pole, If there is any emergency situations like harassment, robbery there is a panic button is available at the reachable height any person can press it if he is in danger. If people are unable to press the panic button, they should use voice recognition which is connected to panic button, when it recognises some commands like help, it automatically press the panic button. Whenever the panic button is pressed, the footages at that time recorded by the camera is sent straightforwardly to the cloud account. The near specific police headquarters can have access of the account by which they can see the incident’s spot. Every region's street lights are associated with the specific area's police headquarters and cloud account can be accessible by each of them. Here GSMTechnology is eliminated completely.Safety and energy consumptions can be ensured by this idea.

scholarly journals PROTOTYPE PENGENDALIAN LAMPU DAN AC JARAK JAUH DENGAN JARINGAN INTERNET MENGGUNAKAN APLIKASI TELEGRAM BERBASIS NODEMCU ESP8266

2021 ◽  
Vol 7 (1) ◽  
pp. 27-34
Author(s):  
Akip Maulana Ibrahim ◽  
Didik Setiyadi
Keyword(s):  
Internet Of Things ◽  
Control Process ◽  
Network Connectivity ◽  
Control Device ◽  
Global Network ◽  
The Internet ◽  
Air Conditioners ◽  
Turn On ◽  
The Internet Of Things ◽  
Internet Network

Internet of Things (IoT) is a concept with the aim of expanding internet network connectivity that is connected to a global network. The Internet of Things (IoT) can be used to remotely control electronic devices such as lights and air conditioners via the internet. This study aims to create a control device that utilizes internet network technology and uses the telegram application to carry out the control process. There are four control features, namely lamp control which is used to turn on one lamp, the second feature is overall lamp control to turn on all lamps at one time, the third feature controls turning on and off the AC, the fourth feature can monitor lamps and the AC is on or off . The research method used in the manufacture of this control device is the Prototype method, which is considered very suitable for use and this device uses the nodeMCU ES8266 microcontroller. The results of this study are the use of Telegram can help and facilitate users or users in monitoring and controlling lights and air conditioners when not in the house.

scholarly journals Disinfectant Spraying Robot to Prevent the Transmission of the Covid-19 Virus Based on the Internet of Things (IoT)

2021 ◽  
Vol 5 (2) ◽  
pp. 61-67
Author(s):  
Indah Sulistiyowati ◽  
Moh Imam Muhyiddin
Keyword(s):  
Internet Of Things ◽  
Environmental Conditions ◽  
Personal Protective Equipment ◽  
Lag Time ◽  
The Internet ◽  
Protective Equipment ◽  
Test Results ◽  
Environmental Hygiene ◽  
Time Required ◽  
The Internet Of Things

One way to prevent the transmission and spread of Covid-19 is to always keep ourselves and our environment clean. Maintaining personal and environmental hygiene can be done by using antiseptics and disinfectants. Disinfectants that are not used properly will be bad for humans. That is why so far the spraying of disinfectants for the prevention of COVID-19 has been carried out by human workers who are dressed in complete Personal Protective Equipment (PPE) using manual sprayers. This is certainly very risky to humans who do the spraying manually. The objective of this research is to minimize the risk of spraying disinfectants, by using a robotic power to spray disinfectant based on the Internet of Things (IoT) and a camera. This robot is operated by using a smartphone while to determine the environmental conditions around it is used a camera. From the test results, it obtained data that the robot works well and is quite reliable due to the wider scope limit because it uses an IoT connection to communicate with smartphones. The results of camera readings on laptops are also quite clear, although the higher the resolution on the display, the lag time required to transfer images to the laptop affects.

Expert system for identifying and analyzing the IoT devices using Augmented Reality Approach

2021 ◽  
pp. 43-57
Author(s):  
WASIN ALKISHRI ◽  
Mahmood Al-Bahri
Keyword(s):  
Augmented Reality ◽  
Internet Of Things ◽  
Specific Area ◽  
Relevant Information ◽  
The Internet ◽  
Test Results ◽  
New Development ◽  
Server Software ◽  
Iot Devices ◽  
The Internet Of Things

Biometrics In conjunction with the new development of the Internet of Things (IoT), augmented reality (AR) systems are evolving to visualize 3D virtual models of the real world into an intelligent and interactive virtual reality environment that facilitates physical identification of objects and defines their specifications efficiently. The integration between AR and IoT in a complementary way helps identify network-related items' specifications and interact with the Internet of Things more efficiently. An identity is a dedicated, publicly known attribute or set of names for an individual device. Typically, identifiers operate within a specific area or network, making it difficult to identify things globally. This paper explores the use of Augmented Reality (AR) Technology for identifying devices and displaying relevant information about the device to the user. Based on the developed model network, the developed system of identification of IoT devices was tested. Also, the traffic generated by the AR device when generating requests to the organization server was investigated. According to the test results, the system is undemanding to the main network indicators. The system-generated traffic is self-similar. The test results show that the server software can solve the problems of identifying IoT devices through interaction with augmented reality devices.

scholarly journals The Infusion of Notification Design With an Application of Social Media Based on a Internet of Things (IOT)

SinkrOn ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 129
Author(s):  
Rudi Arif Candra ◽  
Devi Satria Saputra ◽  
Dirja Nur Ilham ◽  
Herry Setiawan ◽  
Hardisal Hardisal
Keyword(s):  
Internet Of Things ◽  
Network Connectivity ◽  
Load Cell ◽  
Sensor Data ◽  
The Internet ◽  
Hospital Nurses ◽  
Test Results ◽  
Iot Platform ◽  
The Internet Of Things ◽  
Internet Network

This study discusses the infusion detection device in a hospital room. This tool is designed to help hospital nurses to cope more quickly to avoid problems due to the infusion. Load cell sensors are used as heavy detectors that send notifications to the nurses through the telegram application that has been installed. The nurse will get a notification message sent to the telegram if the sensor has read the weight. The tool is made using a load cell sensor and NodeMCU Wi-FiESP866 which functions to send notification of the results of sensor data input to the Internet of Things (IOT) platform namely Telegram. Nurses need to be connected to the internet network to get notifications on the telegram. Test results show that the time needed to send and receive notifications on Telegram takes about 2-5 seconds. The message will be sent 3 times, first the infusion WARNING is almost exhausted (alert), second the infusion WARNING is almost exhausted (standby) and the infusion WARNING is almost exhausted (please replace). If the infusion is not replaced by the nurse, it will be warned by Buzzer. However, time can be influenced by the available internet network connectivity. However, time can be affected by the available internet network.

scholarly journals Development of IoT-Based Lighting Installation Practicum Module

2022 ◽  
Vol 8 (2) ◽  
pp. 164
Author(s):  
Ahmad Mukhaidir Shidiq ◽  
Purwito Purwito ◽  
Ruslan Ruslan
Keyword(s):  
Internet Of Things ◽  
Electronic Devices ◽  
Smartphone Application ◽  
The Internet ◽  
Sensor Reading ◽  
Turn On ◽  
Current Voltage ◽  
Power And Energy ◽  
The Internet Of Things ◽  
Data Reading

With the advancement of technology today, there is known to be an innovation that is the internet of things where electronic devices can be monitored and controlled remotely. For this reason, the practicum module of internet of things-based lighting installation as a medium of learning for students. The workings of the tool will be made using the PZEM-004T sensor as a sensor reading the current voltage, power, and energy used and ESP-32 as an additional module on the Arduino Mega so that data reading voltage, current and power can be sent using the internet network to the smartphone. In the smartphone application, we can also control to extinguish or turn on the lights.

Sign in / Sign up

Export Citation Format

Share Document