scholarly journals Strength Properties of Fibre-Reinforced SelfConsolidating Concrete with Foundry Waste Sand

2019 ◽  
Vol 8 (10) ◽  
pp. 1530-1538
Keyword(s):  
Modulus Of Elasticity ◽  
High Strength ◽  
Strength Properties ◽  
Fine Aggregate ◽  
Comprehensive Overview ◽  
River Sand ◽  
Split Tensile Strength ◽  
Alternative Source ◽  
Fresh State ◽  
Passing Ability

This study presents a comprehensive overview of replacing natural river sand (FA) with foundry waste sand (FWS) in fibre-reinforced high strength self-consolidating concrete (SCC). Fine aggregate (FA) was replaced with FWS, proportions varying from 0% to 70%. To maintain workability in the SCC mix, chemical admixtures were added. During fresh state, properties of SCC like filling and passing ability, segregation resistance were studied. Assessment results indicated a moderate reduction in workability, slump flow decreased by 4% over control mix, for 70% replacement of FA with FWS. SCC mixes were prepared with different FWS contents and evaluated for density, modulus of elasticity, compressive, flexural and split tensile strengths. The compressive strength increased by 6% to 8%, flexural strength by 2% to 4% and split tensile strength by 2% to 3% when the FA was partially replaced by 20% with FWS. Density of SCC increased by 6.5% and modulus of elasticity decreased by 10% for 70% replacement of FA with FWS. From the assessment outcome, it can be resolved that FWS could form a dependable alternative source for natural river sand replacement in high strength SCC.

scholarly journals Strength Properties of Concrete with M-Sand as Fine Aggregate Incorporating with Acrylic Fiber

2020 ◽  
Vol 9 (4) ◽  
pp. 204-208
Keyword(s):  
Tensile Strength ◽  
Plain Concrete ◽  
Strength Properties ◽  
Fine Aggregate ◽  
River Sand ◽  
Split Tensile Strength ◽  
Acrylic Fiber ◽  
River Bed ◽  
Strength And Durability ◽  
Aggregate Material

The river sand is the natural sort of fine aggregate material which is employed within the concrete and mortar. It’s usually obtained from the river bed and mining has disastrous environment consequences. Rather than the river sand we are using M-sand as fine aggregate within the concrete. The event of acrylic concrete marks a crucial milestone in improving the merchandise quality and efficiency of the concrete. Usage of acrylic within the concrete will increase the strength and durability of the concrete. It enhances the performance of the concrete and increase energy absorption compared with plain concrete. Within the present work we are getting to analysis the strength properties of fiber reinforced M-sand concrete like compressive strength, flexural strength, split tensile strength, and bond strength.

Utilization of Iron Filings as Partial Replacements for Sand in Self-Compacting Concrete

2021 ◽  
Vol 47 (3) ◽  
pp. 906-916
Author(s):  
Simon O. Olawale ◽  
Mutiu A. Kareem ◽  
Habeeb T. Muritala ◽  
Abiola U. Adebanjo ◽  
Olusegun O. Alabi ◽  
...  
Keyword(s):  
Steel Production ◽  
Strength Properties ◽  
Self Compacting Concrete ◽  
River Sand ◽  
Slump Flow ◽  
Filling Ability ◽  
Fine Aggregates ◽  
Concrete Production ◽  
Fresh State ◽  
Passing Ability

The use of industrial by-products in concrete production is part of concerted efforts on the reduction of environmental hazards attributed to the mining of conventional aggregates. Consideration of iron filings (IF), a by-product from steel production process, is an environmentally friendly way of its disposal which is expected to yield economic concrete production. Six self-compacting concrete (SCC) mixes were made by partially substituting river sand with IF at 5%, 10%, 15%, and 20% and the mix without IF (0% IF) served as the control. The water-binder (w/b) ratio of 0.45 was adopted for all mixes. The fresh state properties of SCC evaluated include: filling ability determined using slump flow and T500 mm slump flow tests, passing ability determined using L-box test and segregation resistance determined using V-funnel tests. The strength properties of SCC considered were compressive and tensile strengths. All the SCC mixes met the fresh properties requirements for filling capacity, passing ability, and segregation resistance. The 28-day compressive and tensile strengths of SCC increased by 3.46% and 8.08%, respectively, with IF replacement up to 15% compared to the control SCC. However, there was reduction in compressive and tensile strengths of SCC with IF replacement beyond 15%. The strength properties of SCC is considerably enhanced with the addition of up to 15% IF. Hence, the optimum content of 15% IF is considered suitable as a replacement for river sand in SCC. Keywords: Self-compacting concrete; iron filings; fine aggregates; filling ability; passing ability

scholarly journals OPTIMIZATION MIX PROPORTION FOR ULTRA HIGH STRENGTH SELF COMPACTING CONCRETE

2010 ◽  
Vol 13 (2) ◽  
pp. 5-15
Author(s):  
Hoang Huy Kim ◽  
Vinh Duc Bui ◽  
Manh Van Tran ◽  
Tri Son Ha
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
High Strength ◽  
Fine Aggregate ◽  
Concrete Composition ◽  
Self Compacting Concrete ◽  
River Sand ◽  
Filling Ability ◽  
Mix Proportion ◽  
Passing Ability

Ultra high strength self compacting concrete (UHSSCC) with high filling ability, passing ability, segregation resistance and ultra high compressive strength have been used in many modern construction project. This paper represents the optimization of concrete composition for ultra high strength self compacting concrete, ỉn this experiment, river sand and crush stone were used as fine aggregate, Dmax of coarse aggregate is 10 mm. The study show that slump flow was 525 mm up to 850 mm and compressive strength was 140 MPa up to 170 MPa.

Strength and Corrosion Resistive Properties of Concrete Containing Quarry Dust as Fine Aggregate with GGBFS

2011 ◽  
Vol 243-249 ◽  
pp. 5775-5778 ◽  
Author(s):  
M. Devi ◽  
K. Kannan
Keyword(s):  
Strength Properties ◽  
Chloride Ions ◽  
Partial Replacement ◽  
Optimum Level ◽  
Fine Aggregate ◽  
Split Tensile Strength ◽  
Natural Sand ◽  
Weight Loss Method ◽  
Loss Method ◽  
Quarry Dust

Demand for natural sand in concrete is increasing day by day since the available sand cannot meet the rising demand of construction sector. This paper reports the experimental study undertaken to investigate the influence of partial replacement of cement with Ground Granulated Blast Furnace Slag(GGBFS) in concrete containing quarry dust as fine aggregate. The cement was replaced by 10%, 20%, 30%, 40% and 50% of GGBFS and tests were conducted to determine the optimum level of replacement of GGBFS in quarry dust concrete. The specimens were subjected to compressive strength, split tensile strength, flexural strength, and bond strength tests at 7days, 28days, 56days, 90days and 150 days. The resistance to corrosion is evaluated based on the performance of the concrete for the penetration of chloride ions by means of impressed voltage technique in saline medium and Gravimetric weight loss method. Results herein reveal that an increase in slag proportion increases the strength properties and decreases the rate and amount of corrosion of reinforcement and among the various percentages of replacement 40% is found to be optimum with better strength and corrosion resistance properties.

scholarly journals Evaluating Optimum Strength of Geopolymer Concrete using Quarry Rock Dust with inclusion of natural and hybrid fibers under ambient curing

2020 ◽  
Vol 9 (6) ◽  
pp. 1-5
Keyword(s):  
Construction Industry ◽  
Glass Fibers ◽  
Strength Properties ◽  
Waste Materials ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Hybrid Fibers ◽  
River Sand ◽  
Rock Dust

Conventionally used cement –a primary binder also a necessitate element in producing concrete rates first in the construction industry. Production of conventional cement requires a greater skill and is energy intensive. The usage of waste materials in the production of concrete and reduction in cement content was only the possible alternative in the past decade. Associated risks with the production of Ordinary Portland Cement are well known. A greener aided with a natural friendly claim can be made only with the usage of the waste materials and reduction in evolving respiration gas to the atmosphere. Almost all works are carried out using source material fly ash, with fine aggregate and coarse aggregate. Concrete plays a vital role in the construction industry and on the other hand, river sand; one of the essential material has become very expensive which is a scarce material. Depletion of sand is a hectic issue due to increased usage of sand in construction. No other replacement materials such as quarry rock dust is not concentrated in casting geopolymer specimens. Even though in some research papers the replacement materials are added only in partial replacement without aiming on 100% replacement. Many researches mainly focus towards test results of GPC specimens using steel fibers, glass fibers. But the study related to natural fibers and hybrid fibers are found scarce. The main part of this work aimed at characterizing the engineering strength properties of geopolymer concrete by 100% replacement of fine aggregate with quarry rock dust. Hence, combination of flyash and quarry rock dust in GPC have been considered for evaluating the mechanical properties of geopolymer concrete. Also, investigation focuses on incorporation of three different fibers namely polypropylene fibers(PF), coir fibers(CF) and hybrid fibers(HF) in different percentage of proportions such as 0.5%,1%,and 1.5% to determine the maximum strength properties of GPC.

scholarly journals Performance of Concrete with Waste Plastics and M-Sand as Replacement for Fine Aggregate

2020 ◽  
Vol 9 (2) ◽  
pp. 1667-1669
Keyword(s):  
Cost Effective ◽  
Raw Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
River Sand ◽  
Split Tensile Strength ◽  
Conventional Concrete ◽  
Waste Plastic ◽  
Fine Aggregates ◽  
Territorial Government

In recent days, there is an intense need for an alternate cost effective and sustainable raw material for concrete which does not make the structure inferior in strength. An experimental study on the utilization of the waste plastic and M-sand in the place of river sand and aggregate partially was performed in paper. In the scenario of scarcity of river sand due to the territorial government action and restriction of usage because of the eco and environmental consideration, M-Sand is found to be an effective replacement and cost effective material. Concrete specimens were casted with combination of M-sand and plastic waste with 5%, 10%, 15%, 20% and 25% and compared against control mix. Cube test for compressive strength study, cylinder test for split tensile strength study and prism test for flexural strength study were done with the proposed concert mixture. All the specimens and tests were done for different curing period of 7, 14 and 28 days. The results obtained from the proposed mix of concrete are compared with the conventional concrete mix specimen respectively. The replacement of fine aggregates reduces the quantity of river sand to be used in concrete and also plastic fibres are proved to be more economical. Positive performance of the concrete with waste plastic and M-Sand as partial replacement of river sand was observed on all the experiments and found optimal in sustainable and economical performance.

scholarly journals Effects of waste glass and waste marble on mechanical and durability performance of concrete

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jawad Ahmad ◽  
Fahid Aslam ◽  
Rebeca Martinez-Garcia ◽  
Jesús de-Prado-Gil ◽  
Shaker M. A. Qaidi ◽  
...  
Keyword(s):  
Industrial Waste ◽  
Mechanical Performance ◽  
High Strength ◽  
Waste Glass ◽  
Waste Materials ◽  
Fine Aggregate ◽  
Concrete Technology ◽  
Split Tensile Strength ◽  
Concrete Production ◽  
Marble Waste

AbstractIndustrial waste has been rapidly increased day by day because of the fast-growing population which results environmental pollutions. It has been recommended that the disposal of industrial waste would be greatly reduced if it could be incorporated in concrete production. In cement concrete technology, there are many possibilities to use waste materials either as cement replacement or aggregate in concrete production. Two major industrials waste are glass and marble waste. The basic objective of this investigation is to examine the characteristics of concrete waste glass (WG) as binding material in proportions 10%, 20% and 30% by weight of cement. Furthermore, to obtain high strength concrete, waste marble in proportion of 40%, 50% and 60% by weight cement as fine aggregate were used as a filler material to fill the voids between concrete ingredients. Fresh properties were evaluated through slump cone test while mechanical performance was evaluated through compressive strength and split tensile strength which were performed after 7 days, 28 days and 56 days curing. Results show that, workability of concrete decreased with incorporation of waste glass and marble waste. Furthermore, mechanical performance improved considerably up 20% and 50% substitution of waste glass and waste marble respectively. Statistical approach of Response Surface Methodology (RSM) was used optimize both waste materials in concrete. Results indicate better agreement between statistical and experimental results.

scholarly journals Effects of Higher Percentage of Stone Dust Used as a Fine Aggregate in Concrete and Variation of Strength due to the Variation of Cement Content and W/C Ratio

2018 ◽  
Vol 7 (2) ◽  
pp. 1-6
Author(s):  
Bikram Paul ◽  
Kushal Ghosh
Keyword(s):  
Construction Industry ◽  
Cement Content ◽  
Strength Properties ◽  
Fine Aggregate ◽  
Split Tensile Strength ◽  
Economic Problems ◽  
River Bed ◽  
Stone Dust ◽  
Rock Crusher ◽  
Basic Strength

Abstract – Sustainability and Unavailability play an important role while we choose material for manufacturing of concrete. Nowadays, both Central and State Govt. have taken legal action on the extraction of sand from the river bed due to the bad impacts on the river like changes the shape, slope of the bed and also in the channel morphology. Due to the implementation of this type of law, legal sand quarries did not able to make balance with the rapid growth of the construction industry. That’s why, to make profit and supply extra needs of sand to the concrete industry “Sand Mafias” involved into the illegal trades of the sand. To counteract these sorts of socio-economic problems, we have to go for an alternative fine aggregate. Though it may not be possible to replace fully, we have to concentrate on the sand being replaced by the high percentage of alternative fine aggregate. Stone dust is a by-product from rock crusher and it can be recycled by using it in the concrete and maintained the sustainability. As stone dust has acceptable properties of fine aggregate sand with regard to shape and texture, it can be thought of as an alternate fine aggregate but research is needed on the extent of sand replacement by stone dust. The present study is done keeping in mind the use of stone dust as high as possible. That’s why two Design Mix have been designed M20 and M25. For M20 grade of concrete sand has been replaced by stone dust 25%, 30% and 35% by volume and the basic strength properties of concrete have been investigated for the above replacements like compressive strength, flexural strength, split tensile strength etc. In case of M25 grade of concrete 30%, 40% and 50% replacement of sand have been done and variation cement content and water-cement ratio has been done by comparing the target mean strength of M25 grade of concrete.

scholarly journals Enhancing the Strength Properties of Self-Compacting Concrete with Fiber Reinforcement

2019 ◽  
Vol 6 (5) ◽  
pp. 5-8
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Strength Properties ◽  
Self Compacting Concrete ◽  
Split Tensile Strength ◽  
Filling Ability ◽  
Hardened Properties ◽  
Passing Ability ◽  
New Generation

Self-compacting concrete is one that is flow able by its own. The SCC is suitable for placing in dense reinforcement structures. It is a new generation performance concrete known for its outstanding deformity and high resistance to bleeding. The concrete is frail material which is comparatively tough in compression but fragile in tension. The tensile strength of concrete is improved by addition of fibers in the concrete mix. The addition of such fibers has negative consequence on the workability of concrete. Various types of fibers are used in concrete to provide the higher flexural strength and better tensile strength. In this research steel fibers are used to provide a better strength as compared with normal reinforced concrete. Steel fiber in SCC significantly improves its flexural strength, improved tensile properties, reduce cracking and improve durability. In this research the investigation of steel fiber in SCC to enhance the strength properties of SCC. The objective of the study was to determine different properties of SCC with steel fiber at different proportions. The experimental investigation was took on the freshly mixed and hardened properties of SCC of various mix with the different variations of fiber 0.25%, 0.50%, 0.75% and 1% by using Viscosity Modified Agent (VMA) 1.5% of cement material by using M25 grade of concrete. In this research a series of tests were carried out for workability like slump cone test, U funnel, V funnel, L box test on SCC to check freshly mix properties like flow-ability, filling-ability, and passing-ability and hardened properties like compressive strength, split-tensile strength and flexural strength respectively and test were conducted at the age of 7Days, 14Days, 28Days on the SCC. The advantage of adding steel fiber in self-compacting concrete is that it enhances its overall strength.

scholarly journals Utilization of Iron Tailings Sand as an Environmentally Friendly Alternative to Natural River Sand in High-Strength Concrete: Shrinkage Characterization and Mitigation Strategies

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5614
Author(s):  
Zhiqiang Zhang ◽  
Zhilu Zhang ◽  
Shaoning Yin ◽  
Linwen Yu
Keyword(s):  
Iron Ore ◽  
Autogenous Shrinkage ◽  
Drying Shrinkage ◽  
High Strength ◽  
Mitigation Strategies ◽  
Fine Aggregate ◽  
River Sand ◽  
Super Absorbent Polymer ◽  
Iron Ore Tailings ◽  
Tailings Sand

The increasing annual emissions of iron ore tailings have proved a great threat to the natural environment, and the shortage of natural river sand, as well as the pursuit of sustainable development materials, provides motivation to reuse iron ore tailings as a fine aggregate in concrete. Due to the significantly different properties of iron tailings sand compared with natural river sand—such as the higher density, higher content of limestone particles smaller than 75 μm and its rough and angular shape—concretes prepared with iron tailings sand show remarkably higher shrinkage. This study presents the shrinkage characterization and shrinkage-reducing efficiency of three different methods on iron tailings, sand concrete and river sand concrete. The internal humidity was also monitored to reveal the shrinkage-reducing mechanism. The obtained results indicated that the autogenous and total shrinkage of iron tailings sand concrete were 9.8% and 13.3% higher than the river sand concrete at the age of 90 d, respectively. The shrinkage reducing agent (SRA) was the most effective shrinkage reducing method for river sand concrete, while for iron tailings sand concrete, super absorbent polymer (SAP) and controlled permeable formwork liner (CPFL) it worked best on autogenous shrinkage and drying shrinkage, respectively. Furthermore, the shrinkage mitigation strategies worked earlier for the drying shrinkage behavior of iron tailings sand concrete, while no such condition could be found for autogenous shrinkage.

Sign in / Sign up

Export Citation Format

Share Document