scholarly journals CFD for Helical Type Vertical Axis Wind Turbine

2019 ◽  
Vol 9 (2S4) ◽  
pp. 474-476
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Computer Aided Design ◽  
Flow Characteristics ◽  
Vertical Axis ◽  
Urban Environments ◽  
Vertical Axis Wind Turbine ◽  
Wind Turbine System ◽  
Twisted Blade ◽  
Aided Design

Vertical axis wind turbines are most effective for home energy generation especially in urban environments. Wind energy creates a stand-alone energy source that is relied on any place. The main criteria for this work is the design of micro wind turbines for all kinds of applications. Design of Twisted Blade Micro-Wind Turbine system is accomplished using computer aided design with Computational Fluid Dynamics (CFD). The flow characteristics in the wind turbine blade were analyzed by varying its twist ratio. The wind turbines with vertical axis utilize the wind from any direction with no yaw mechanism. The risk of blade ejection besides catching wind from all the directions is avoided by using the helical tye vertical axis wind turbine.

scholarly journals Numerical Analysis of a Small-Size Vertical-Axis Wind Turbine Performance and Averaged Flow Parameters Around the Rotor

2017 ◽  
Vol 64 (2) ◽  
pp. 205-218 ◽  
Author(s):  
Krzysztof Rogowski ◽  
Ryszard Maroński ◽  
Janusz Piechna
Keyword(s):  
Velocity Field ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Urban Environments ◽  
Speed Ratio ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Static Pressure Distribution ◽  
Rural And Urban

AbstractSmall-scale vertical-axis wind turbines can be used as a source of electricity in rural and urban environments. According to the authors’ knowledge, there are no validated simplified aerodynamic models of these wind turbines, therefore the use of more advanced techniques, such as for example the computational methods for fluid dynamics is justified. The paper contains performance analysis of the small-scale vertical-axis wind turbine with a large solidity. The averaged velocity field and the averaged static pressure distribution around the rotor have been also analyzed. All numerical results presented in this paper are obtained using the SST k-ω turbulence model. Computed power coeffcients are in good agreement with the experimental results. A small change in the tip speed ratio significantly affects the velocity field. Obtained velocity fields can be further used as a base for simplified aerodynamic methods.

scholarly journals Power Enhancement of a Vertical Axis Wind Turbine Equipped with an Improved Duct

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5780
Author(s):  
Mohammad Hassan Ranjbar ◽  
Behnam Rafiei ◽  
Seyyed Abolfazl Nasrazadani ◽  
Kobra Gharali ◽  
Madjid Soltani ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Flow Characteristics ◽  
Maximum Velocity ◽  
Leading Edge ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Numerical Solver ◽  
Main Components

Efforts to increase the power output of wind turbines include Diffuser Augmented Wind Turbines (DAWT) or a shroud for the rotor of a wind turbine. The selected duct has three main components: a nozzle, a diffuser, and a flange. The combined effect of these components results in enriched upstream velocity for the rotor installed in the throat of the duct. To obtain the maximum velocity in the throat of the duct, the optimum angles of the three parts have been analyzed. A code was developed to allow all the numerical steps including changing the geometries, generating the meshes, and setting up the numerical solver simultaneously. Finally, the optimum geometry of the duct has been established that allows a doubling of the flow velocity. The flow characteristics inside the duct have also been analyzed in detail. An H-Darrieus Vertical Axis Wind Turbine (VAWT) has been simulated inside the optimized duct. The results show that the power coefficient of the DAWT can be enhanced up to 2.9 times. Deep dynamic stall phenomena are captured perfectly. The duct advances the leading-edge vortex generation and delays the vortex separation.

Computer Aided Design and Manufacture of a Novel Vertical Axis Wind Turbine Rotor with Winglet

2014 ◽  
Vol 607 ◽  
pp. 581-587 ◽  
Author(s):  
Noor A. Ahmed ◽  
K.J. Netto
Keyword(s):  
Wind Turbine ◽  
Computer Aided Design ◽  
Performance Enhancement ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Numerical Control ◽  
Vertical Axis Wind Turbine ◽  
Computer Aided ◽  
Aided Design ◽  
Design And Manufacture

In this paper the computer aided design and manufacture of a rot with winglet for performance enhancement of a vertical axis wind turbine is presented. Both computer numerical control milling and rapid prototyping have been used in the manufacture of the rotor. The rotor was then tested for performance using the large wind tunnel of the Aerodynamics laboratory of University of New South Wales. The results show substantial improvement of the rotor with the winglets installed.

scholarly journals Flow Characteristics of a Straight-Bladed Vertical Axis Wind Turbine with Inclined Pitch Axes

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6281
Author(s):  
Jia Guo ◽  
Liping Lei
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Flow Characteristics ◽  
Wind Farms ◽  
Vertical Axis ◽  
Incline Angle ◽  
Vertical Axis Wind Turbine ◽  
Unsteady Wake ◽  
Horizontal Axis Wind Turbines

Currently, vertical axis wind turbines (VAWT) are considered as an alternative technology to horizontal axis wind turbines in specific wind conditions, such as offshore farms. However, complex unsteady wake structures of VAWTs exert a significant influence on performance of wind turbines and wind farms. In the present study, instantaneous flow fields around and downstream of an innovative VAWT with inclined pitch axes are simulated by an actuator line model. Unsteady flow characteristics around the wind turbine with variations of azimuthal angles are discussed. Several fluid parameters are then evaluated on horizontal and vertical planes under conditions of various fold angles and incline angles. Results show that the total estimated wind energy in the shadow of the wind turbine with an incline angle of 30° and 150° is 4.6% higher than that with an incline angle of 90°. In this way, appropriate arrangements of wind turbines with various incline angles have the potential to obtain more power output in a wind farm.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

Concepts Developed for a Multi-Phased, Vertical Axis Wind Turbine System With an Adjustable Inlet Air Scoop and Exit Drag Curtain

2010 ◽  
Author(s):  
Brett C. Krippene ◽  
Ira Sorensen
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Tall Buildings ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Flow Tube ◽  
Technical Feasibility ◽  
Essential Information ◽  
Wind Turbine System ◽  
Air Turbine

A conceptual design is presented of a roof-top type, MULTI-PHASED VERTICAL AXIS WIND TURBINE SYSTEM with an ADJUSTABLE INLET AIR SCOOP and EXIT DRAG CURTAIN at a 100 Watt to 50 kWe commercial scale. The MULTI-PHASED VERTICAL AXIS WIND TURBINE (MVAWT) SYSTEM is cost effective in an environmentally friendly manner. It is especially useful in areas where it can benefit from the wind velocity increasing and streamlining effects that may occur around small hills, roof tops and tall buildings. The MVAWT system concentrates, collects and utilizes the available energy in the wind by way of a naturally yawed, downwind seeking, vertical axis orientated flow tube and integrated air turbine assembly with adjustable inlet air scoop and outlet drag sections mounted on the flow tube. The MVAWT system’s air turbine is a combination radial or mixed out-flow and reaction cross-flow type centrifugal fan design as mounted on the discharge end of the flow tube. This air turbine, being more of a radial instead of an axial flow or propeller type design, can potentially exceed the Betz limit of 59.26% energy recovery or effectiveness from the maximum energy available from the wind flowing through the inlet flow tube. A low pressure drop screen can be provided at the inlet and outlet to protect flying birds and mammals from being drawn into the integrated flow tube and air turbine assembly. Additionally, access to the rotating components for inspection and maintenance purposes is much safer, easier and less costly than with conventional propeller type wind turbine systems mounted on tall towers. No multiple staged wind turbine system as described herein has as yet been researched as to its technical feasibility and developed to the point of a prototype demonstration at a commercial size. Such parameters as overall performance, energy conversion efficiency, costs (installed, operating and maintenance), system reliability, public acceptance and environmental impacts have not yet been truly assessed. A Phase I - technical feasibility assessment and Phase II - prototype demonstration program for a nominal 10 kWe sized Multi-Phased Vertical Axis Wind Turbine system with an average power output in a 16 mph wind of as much as 2 kWe (kW-hr / hr) and as much as 10 kWe (kW-hr / hr) at a 28 mph wind velocity is suggested to provide this essential information to both the authors and the public at large.

scholarly journals Aerodynamic improvement of Darrieus wind turbine

2021 ◽  
Vol 897 (1) ◽  
pp. 012001
Author(s):  
Oleg Goman ◽  
Andrii Dreus ◽  
Anton Rozhkevych ◽  
Krystyna Heti
Keyword(s):  
Reynolds Number ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Reliability ◽  
Vertical Axis ◽  
Vertical Wind ◽  
Integral Approach ◽  
Vertical Axis Wind Turbine ◽  
Calculation Algorithm ◽  
Vertical Axis Wind Turbines

Abstract Until recently, vertical-axis wind turbines are less extensively developed in wind energetics. At the same time, there are a number of advantages in turbines of such type like their independence from the change of wind direction, lower levels of aerodynamic and infrasound noises, higher structural reliability (compared to horizontal engines), etc. With these advantages, vertical-axis wind turbines demonstrate promising capacities. Inter alia, the productiveness of such turbines can be refined through the aerodynamic improvement of the structure and comprehensive optimization of the rotor geometry. The main purpose of the presented paper is to aerodynamically improve vertical wind turbine in order to increase the efficiency of wind energy conversion into electricity. Within the framework of the classical theory of impulses, this article presents a study of the effect of variation in Reynolds number on the general energy characteristics of a vertical-axis wind turbine with two blades. The integral approach makes it possible to use a single-disk impulse model to determine the main specific indicators of the system. The power factor was calculated based on the obtained value of the shaft torque factor, which in turn was determined by numerically integrating the total torque generated by the wind turbine. To calculate the test problem, we used the classic NACA airfoils: 0012, 0015, 0018 and 0021. The proposed calculation algorithm makes it possible not to indicate the Reynolds number and corresponding aerodynamic coefficients at the beginning of the calculation, but to recalculate it depending on the relative speed, position of the airfoil and the linear speed of the airfoil around the circumference. Proposed modern design techniques can be helpful for optimization of vertical wind turbines.

Aerodynamic Analysis for Camber Effect in Vertical Wind Turbine System

2011 ◽  
Author(s):  
Jinwook Kim ◽  
Dohyung Lee ◽  
Junhee Han ◽  
Sangwoo Kim
Keyword(s):  
Numerical Simulation ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Low Wind Speed ◽  
Wind Turbine System ◽  
Physical Features ◽  
The Ideal

The Vertical Axis Wind Turbine (VAWT) has advantages over Horizontal Axis Wind Turbine (HAWT) that it allows less chance to be degraded independent of wind direction and turbine can be operated even at the low wind speed. The objective of this study is to analyze aerodynamics of the VAWT airfoil and investigate the ideal shape of airfoil, more specifically cambers. The analysis of aerodynamic characteristics with various cambers has been performed using numerical simulation with CFD software. As the numerical simulation discloses local physical features around wind turbine, aerodynamic performance such as lift, drag and torque are computed for single airfoil rotation and multiple airfoil rotation cases. Through this study more effective airfoil shape is suggested based vortex-airfoil interaction studies.

Optimized Small Vertical Axis Wind Turbine (VAWT), Phase I

2021 ◽  
Author(s):  
Moshe Zilberman ◽  
Abdelaziz Abu Sbaih ◽  
Ibrahim Hadad
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cost Effective ◽  
Clean Energy ◽  
Vertical Axis ◽  
Low Noise ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Different Types

Abstract Wind energy has become an important resource for the growing demand for clean energy. In 2020 wind energy provided more than 6% of the global electricity demand. It is expected to reach 7% at the end of 2021. The installation growth rate of small wind turbines, though, is relatively slow. The reasons we are interested in the small vertical axis wind turbines are their low noise, environmentally friendly, low installation cost, and capable of being rooftop-mounted. The main goal of the present study is an optimization process towards achieving the optimal cost-effective vertical wind turbine. Thirty wind turbine models were tested under the same conditions in an Azrieli 30 × 30 × 90 cm low-speed wind tunnel at 107,000 Reynolds number. The different types of models were obtained by parametric variations of five basic models, maintaining the same aspect ratio but varying the number of bucket phases, the orientation angles, and the gaps between the vanes. The best performing turbine model was made of one phase with two vanes of non-symmetric bipolynomial profiles that exhibited 0.2 power coefficient, relative to 0.16 and 0.13 that were obtained for symmetrical polynomial and the original Savonius type turbines, respectively. Free rotation, static forces and moments, and dynamic moments and power were measured for the sake of comparison and explanation for the variations in performances of different types of turbines. CFD calculations were used to understand the forces and moment behaviors of the optimized turbine.

Investigation of vertical axis wind turbine airfoil performance in rain

2017 ◽  
Vol 232 (2) ◽  
pp. 181-194 ◽  
Author(s):  
Zhenlong Wu ◽  
Yihua Cao
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Meteorological Condition ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance ◽  
Practical Design ◽  
Wind Turbine Airfoil ◽  
Naca 0015

Rainfall is a common meteorological condition that wind turbines may encounter and by which their performance may be affected. This paper comprehensively investigates the effects of rainfall on a NACA 0015 airfoil which is commonly used in vertical axis wind turbines. A CFD-based Eulerian–Lagrangian multiphase approach is proposed to study the static, rotating, and oscillating performances of the NACA 0015 airfoil in rainy conditions. It is found that for the different airfoil movements, the airfoil performance can seriously be deteriorated in the rain condition. Rain also causes premature boundary layer separations and more severe flow recirculations than in the dry condition. These findings seem to be the first open reports on rain effects on wind turbine performance and should be of some significance to practical design.

Sign in / Sign up

Export Citation Format

Share Document