scholarly journals Mechanical Design and Analysis of Detector Head Assembly for Space bone High-Resolution Imaging Sensor

2020 ◽  
Vol 9 (4) ◽  
pp. 972-976
Keyword(s):  
Mechanical Design ◽  
Research Work ◽  
Project Work ◽  
Effect Of Temperature ◽  
Lunar Phase ◽  
Novel Approach ◽  
Wide Range ◽  
Head Assembly ◽  
Imaging Sensor ◽  
Detector Head

The imaging sensors employed in satellites are subjected to a wide range of vibratory loads induced during the launching phase. The effect of temperature change also needs to be looked upon while designing the structure of the imaging sensor as satellite passes through the solar and lunar phase. This project work goes into depth of challenges incurred during launching and in-orbit operation. The research includes development of lightweight structure, incorporating flexure interface to house detector head assembly (DHA) components. The design of flexural mount is a novel approach that not only arrests the deformation of the imaging sensor but also restricts structural stresses to affect the performance of the imaging sensor. This article showcases the assessment of three different mechanical designs of DHA through finite element simulation results computed in ANSYS workbench environment. The survivability of DHA structure has been checked under 55g quasi-static loading to simulate launch vibration along with 10°C thermal gradient corresponded to the in-service orbital motion. In this research work, AL6061-T6 and Kovar has been chosen for various design components of the DHA as they are space qualified materials. Though both material options showed similar performance, due to low density, ready availability and cost effectiveness leads to select Al6061-T6 material for the fabrication of DHA components.

Justification of the need to improve the legal, regulatory and methodological framework for the spread of parasitic infections in the provision of medical care

2020 ◽  
Vol 99 (5) ◽  
pp. 493-497
Author(s):  
M. M. Aslanova ◽  
T. V. Gololobova ◽  
K. Yu. Kuznetsova ◽  
Tamari R. Maniya ◽  
D. V. Rakitina ◽  
...  
Keyword(s):  
Medical Care ◽  
Research Work ◽  
Hospital Environment ◽  
Parasitic Infections ◽  
Infusion Therapy ◽  
Methodological Framework ◽  
Production Environment ◽  
Medical Institutions ◽  
Medical Network ◽  
Wide Range

Introduction. The purpose of our work was to justify the need to improve the legislative, regulatory and methodological framework and preventative measures in relation to the spread of parasitic infections in the provision of medical care. There is a wide range of pathogens of parasitic infestations that are transmitted to humans through various medical manipulations and interventions carried out in various medical institutions. Contaminated care items and furnishings, medical instruments and equipment, solutions for infusion therapy, medical personnel’s clothing and hands, reusable medical products, drinking water, bedding, suture and dressing materials can serve as a major factor in the spread of parasitic infections in the provision of medical care. Purpose of research is the study of the structure and SMP of parasitic origin, circulating on the objects of the production environment in multi-profile medical and preventive institutions of stationary type in order to prevent the occurrence of their spread within medical institutions. Material and methods. The material for the study was flushes taken from the production environment in 3 multi-profile treatment and prevention institutions of inpatient type: a multi-specialty hospital, a maternity hospital and a hospital specializing in the treatment of patients with intestinal diseases for the eggs of worms and cysts of pathogenic protozoa. Results. During the 2-year monitoring of medical preventive institutions, a landscape of parasitic contamination was found to be obtained from the flushes taken from the production environment objects in the premises surveyed as part of the research work. Discussions. In the course of research, the risk of developing ISMP of parasitic origin was found to be determined by the degree of epidemiological safety of the hospital environment, the number and invasiveness of treatment and diagnostic manipulations and various medical technologies. Conclusion. It is necessary to conduct an expert assessment of regulatory and methodological documents in the field of epidemiological surveillance and sanitary and hygienic measures for the prevention of medical aid related infections of parasitic origin, to optimize the regulatory and methodological base, to develop a number of preventive measures aimed at stopping the spread of parasitic infections in the medical network.

Green synthesis, characterization of silver sulfide nanoparticles and antibacterial activity evaluation

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Antibacterial Activity ◽  
Large Scale ◽  
Research Work ◽  
Silver Sulfide ◽  
Morphological Properties ◽  
Effective Diameter ◽  
Novel Approach ◽  
Transmission Electron ◽  
Green Route ◽  
Silver Sulfide Nanoparticles

This research work presents a facile and green route for synthesis silver sulfide (Ag2SNPs) nanoparticles from silver nitrate (AgNO3) and sodium sulfide nonahydrate (Na2S.9H2O) in the presence of rosemary leaves aqueous extract at ambient temperature (27 oC). Structural and morphological properties of Ag2SNPs nanoparticles were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface Plasmon resonance for Ag2SNPs was obtained around 355 nm. Ag2SNPs was spherical in shape with an effective diameter size of 14 nm. Our novel approach represents a promising and effective method to large scale synthesis of eco-friendly antibacterial activity silver sulfide nanoparticles.

Development and Evaluation of Sustained Release Lipid Nanocarriers for Curcumin

2020 ◽  
Vol 5 (3) ◽  
pp. 224-235
Author(s):  
Harshal A. Pawar ◽  
Bhagyashree D. Bhangale
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Drug Delivery Systems ◽  
Biological Activities ◽  
Curcuma Longa ◽  
Research Work ◽  
Elimination Rate ◽  
Delivery Systems ◽  
Physicochemical Stability ◽  
Wide Range

Background: Lipid based excipients have increased acceptance nowadays in the development of novel drug delivery systems in order to improve their pharmacokinetic profiles. Drugs encapsulated in lipids have enhanced stability due to the protection they experience in the lipid core of these nano-formulations. Phytosomes are newly discovered drug delivery systems and novel botanical formulation to produce lipophilic molecular complex which imparts stability, increases absorption and bioavailability of phytoconstituent. Curcumin, obtained from turmeric (Curcuma longa), has a wide range of biological activities. The poor solubility and wettability of curcumin are responsible for poor dissolution and this, in turn, results in poor bioavailability. To overcome these limitations, the curcumin-loaded nano phytosomes were developed to improve its physicochemical stability and bioavailability. Objective: The objective of the present research work was to develop nano-phytosomes of curcumin to improve its physicochemical stability and bioavailability. Methods: Curcumin-loaded nano phytosomes were prepared by using phospholipid Phospholipon 90 H using a modified solvent evaporation method. The developed curcumin nano phytosomes were evaluated by particle size analyzer and differential scanning calorimetry (DSC). Results: Results indicated that phytosomes prepared using curcumin and lipid in the ratio of 1:2 show good entrapment efficiency. The obtained curcumin phytosomes were spherical in shape with a size less than 100 nm. The prepared nano phytosomal formulation of curcumin showed promising potential as an antioxidant. Conclusion: The phytosomal complex showed sustained release of curcumin from vesicles. The sustained release of curcumin from phytosome may improve its absorption and lowers the elimination rate with an increase in bioavailability.

ESRC Review

2020 ◽  
pp. 657-698
Author(s):  
Simeon J. Yates ◽  
Jordana Blejmar
Keyword(s):  
Social Research ◽  
Social Science Research ◽  
Research Work ◽  
Science Research ◽  
Wide Range ◽  
The Us ◽  
Levels Of Automation ◽  
The Uk ◽  
Technological World ◽  
Ways Of Being

Two workshops were part of the final steps in the Economic and Social Research Council (ESRC) commissioned Ways of Being in a Digital Age project that is the basis for this Handbook. The ESRC project team coordinated one with the UK Defence Science and Technology Laboratory (ESRC-DSTL) Workshop, “The automation of future roles”; and one with the US National Science Foundation (ESRC-NSF) Workshop, “Changing work, changing lives in the new technological world.” Both workshops sought to explore the key future social science research questions arising for ever greater levels of automation, use of artificial intelligence, and the augmentation of human activity. Participants represented a wide range of disciplinary, professional, government, and nonprofit expertise. This chapter summarizes the separate and then integrated results. First, it summarizes the central social and economic context, the method and project context, and some basic definitional issues. It then identifies 11 priority areas needing further research work that emerged from the intense interactions, discussions, debates, clustering analyses, and integration activities during and after the two workshops. Throughout, it summarizes how subcategories of issues within each cluster relate to central issues (e.g., from users to global to methods) and levels of impacts (from wider social to community and organizational to individual experiences and understandings). Subsections briefly describe each of these 11 areas and their cross-cutting issues and levels. Finally, it provides a detailed Appendix of all the areas, subareas, and their specific questions.

scholarly journals Responsive and Personalized Web Layouts with Integer Programming

2021 ◽  
Vol 5 (EICS) ◽  
pp. 1-23
Author(s):  
Markku Laine ◽  
Yu Zhang ◽  
Simo Santala ◽  
Jussi P. P. Jokinen ◽  
Antti Oulasvirta
Keyword(s):  
Integer Programming ◽  
Web Design ◽  
Web Pages ◽  
Web Page Design ◽  
Automated Generation ◽  
Novel Approach ◽  
Wide Range ◽  
Responsive Design ◽  
Responsive Web Design ◽  
Page Design

Over the past decade, responsive web design (RWD) has become the de facto standard for adapting web pages to a wide range of devices used for browsing. While RWD has improved the usability of web pages, it is not without drawbacks and limitations: designers and developers must manually design the web layouts for multiple screen sizes and implement associated adaptation rules, and its "one responsive design fits all" approach lacks support for personalization. This paper presents a novel approach for automated generation of responsive and personalized web layouts. Given an existing web page design and preferences related to design objectives, our integer programming -based optimizer generates a consistent set of web designs. Where relevant data is available, these can be further automatically personalized for the user and browsing device. The paper includes presentation of techniques for runtime adaptation of the designs generated into a fully responsive grid layout for web browsing. Results from our ratings-based online studies with end users (N = 86) and designers (N = 64) show that the proposed approach can automatically create high-quality responsive web layouts for a variety of real-world websites.

scholarly journals Density Guarantee on Finding Multiple Subgraphs and Subtensors

2021 ◽  
Vol 15 (5) ◽  
pp. 1-32
Author(s):  
Quang-huy Duong ◽  
Heri Ramampiaro ◽  
Kjetil Nørvåg ◽  
Thu-lan Dam
Keyword(s):  
Lower Bound ◽  
State Of The Art ◽  
The State ◽  
The Other ◽  
Exact Methods ◽  
Practical Solution ◽  
Novel Approach ◽  
Wide Range ◽  
Real World Datasets ◽  
Tensor Data

Dense subregion (subgraph & subtensor) detection is a well-studied area, with a wide range of applications, and numerous efficient approaches and algorithms have been proposed. Approximation approaches are commonly used for detecting dense subregions due to the complexity of the exact methods. Existing algorithms are generally efficient for dense subtensor and subgraph detection, and can perform well in many applications. However, most of the existing works utilize the state-or-the-art greedy 2-approximation algorithm to capably provide solutions with a loose theoretical density guarantee. The main drawback of most of these algorithms is that they can estimate only one subtensor, or subgraph, at a time, with a low guarantee on its density. While some methods can, on the other hand, estimate multiple subtensors, they can give a guarantee on the density with respect to the input tensor for the first estimated subsensor only. We address these drawbacks by providing both theoretical and practical solution for estimating multiple dense subtensors in tensor data and giving a higher lower bound of the density. In particular, we guarantee and prove a higher bound of the lower-bound density of the estimated subgraph and subtensors. We also propose a novel approach to show that there are multiple dense subtensors with a guarantee on its density that is greater than the lower bound used in the state-of-the-art algorithms. We evaluate our approach with extensive experiments on several real-world datasets, which demonstrates its efficiency and feasibility.

scholarly journals Membrane Lipid Composition of the Moderately Thermophilic Ammonia-Oxidizing Archaeon “Candidatus Nitrosotenuis uzonensis” at Different Growth Temperatures

2019 ◽  
Vol 85 (20) ◽  
Author(s):  
Nicole J. Bale ◽  
Marton Palatinszky ◽  
W. Irene C. Rijpstra ◽  
Craig W. Herbold ◽  
Michael Wagner ◽  
...  
Keyword(s):  
Lipid Composition ◽  
Strong Influence ◽  
Thermal Spring ◽  
Membrane Lipid ◽  
Effect Of Temperature ◽  
Environmental Niche ◽  
Membrane Lipid Composition ◽  
Moderately Thermophilic ◽  
Wide Range ◽  
Membrane Spanning

ABSTRACT “Candidatus Nitrosotenuis uzonensis” is the only cultured moderately thermophilic member of the thaumarchaeotal order Nitrosopumilales (NP) that contains many mesophilic marine strains. We examined its membrane lipid composition at different growth temperatures (37°C, 46°C, and 50°C). Its lipids were all membrane-spanning glycerol dialkyl glycerol tetraethers (GDGTs), with 0 to 4 cyclopentane moieties. Crenarchaeol (cren), the characteristic thaumarchaeotal GDGT, and its isomer (crenʹ) were present in high abundance (30 to 70%). The GDGT polar headgroups were mono-, di-, and trihexoses and hexose/phosphohexose. The ratio of glycolipid to phospholipid GDGTs was highest in the cultures grown at 50°C. With increasing growth temperatures, the relative contributions of cren and crenʹ increased, while those of GDGT-0 to GDGT-4 (including isomers) decreased. TEX86 (tetraether index of tetraethers consisting of 86 carbons)-derived temperatures were much lower than the actual growth temperatures, further demonstrating that TEX86 does not accurately reflect the membrane lipid adaptation of thermophilic Thaumarchaeota. As the temperature increased, specific GDGTs changed relative to their isomers, possibly representing temperature adaption-induced changes in cyclopentane ring stereochemistry. Comparison of a wide range of thaumarchaeotal core lipid compositions revealed that the “Ca. Nitrosotenuis uzonensis” cultures clustered separately from other members of the NP order and the Nitrososphaerales (NS) order. While phylogeny generally seems to have a strong influence on GDGT distribution, our analysis of “Ca. Nitrosotenuis uzonensis” demonstrates that its terrestrial, higher-temperature niche has led to a lipid composition that clearly differentiates it from other NP members and that this difference is mostly driven by its high crenʹ content. IMPORTANCE For Thaumarchaeota, the ratio of their glycerol dialkyl glycerol tetraether (GDGT) lipids depends on growth temperature, a premise that forms the basis of the widely applied TEX86 paleotemperature proxy. A thorough understanding of which GDGTs are produced by which Thaumarchaeota and what the effect of temperature is on their GDGT composition is essential for constraining the TEX86 proxy. “Ca. Nitrosotenuis uzonensis” is a moderately thermophilic thaumarchaeote enriched from a thermal spring, setting it apart in its environmental niche from the other marine mesophilic members of its order. Indeed, we found that the GDGT composition of “Ca. Nitrosotenuis uzonensis” cultures was distinct from those of other members of its order and was more similar to those of other thermophilic, terrestrial Thaumarchaeota. This suggests that while phylogeny has a strong influence on GDGT distribution, the environmental niche that a thaumarchaeote inhabits also shapes its GDGT composition.

Development and characterization of electrospun curcumin-loaded antimicrobial nanofibrous membranes

2020 ◽  
pp. 004051752092551
Author(s):  
Javeed A Awan ◽  
Saif Ur Rehman ◽  
Muhammad Kashif Bangash ◽  
Fiaz Hussain ◽  
Jean-Noël Jaubert
Keyword(s):  
Biological Activities ◽  
Research Work ◽  
Medical Applications ◽  
Electrospinning Technique ◽  
Naturally Occurring ◽  
Wide Range ◽  
Nanofibrous Membranes ◽  
Antimicrobial Barrier ◽  
Anti Hiv

Curcumin is a naturally occurring hydrophobic polyphenol compound. It exhibits a wide range of biological activities such as antibacterial, anti-inflammatory, anti-carcinogenic, antifungal, anti-HIV, and antimicrobial activity. In this research work, antimicrobial curcumin nanofibrous membranes are produce by an electrospinning technique using the Eudragit RS 100 (C19H34ClNO6) polymer solution enriched with curcumin. The morphology and chemistry of the membrane are analyzed using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Kirby Bauer disk diffusion tests are carried out to examine the antibacterial effectiveness of the membrane. Experimental results show that the nanofibers produced are of uniform thickness morphology and curcumin is successfully incorporated into the nanofibrous mat, while no chemical bonding was observed between curcumin and the polymer. The antimicrobial curcumin nanofibrous membranes can be effectively applied as antimicrobial barrier in a wide variety of medical applications such as wound healing, scaffolds, and tissue engineering.

Carbon Nanotubes Grown on Metallic Wires by Cold Plasma Technique

2002 ◽  
Vol 737 ◽  
Author(s):  
D. Sarangi ◽  
A. Karimi
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Growth Conditions ◽  
Effect Of Temperature ◽  
Rutherford Back Scattering ◽  
Novel Approach ◽  
Transmission Electron ◽  
Back Scattering ◽  
Metallic Wires ◽  
Metal Wires

ABSTRACTCarbon nanotubes on metallic wires may be act as electrode for the field emission (FE) luminescent devices. Growing nanotubes on metallic wires with controlled density, length and alignment are challenging issues for this kind of devices. We, in the present investigation grow carbon nanotubes directly on the metal wires by a powerful but simple technique. A novel approach has been proposed to align nanotubes during growth. Methane, acetylene and dimethylamine have been used as source gases. With the same growth conditions (viz. pressure, growth temperature and plasma) methane does not produce any nanotube but nanotubes grown with dimethylamine show shorter length and radius than acetylene. The effect of temperature to control the radius, time to control the density, plasma conditions to align the nanotubes has been focused. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Rutherford Back Scattering (RBS) are used to characterize the nanotubes.

Application of eco-friendly natural dye obtained from Spathodea campanulata on silk using combination of mordants

2016 ◽  
Vol 27 (1) ◽  
pp. 15-21 ◽  
Author(s):  
M Kumaresan
Keyword(s):  
Large Scale ◽  
Potassium Dichromate ◽  
Ferrous Sulphate ◽  
Research Work ◽  
Natural Dye ◽  
Alkaline Media ◽  
Silk Fabric ◽  
Content Type ◽  
Wide Range ◽  
New Research

Purpose – The purpose of this paper is to extract the eco-friendly natural dye obtained from the flower of Spathodea campanulata and apply on silk fabric using combination of mordants. The fastness properties of the flower of Spathodea campanulata dyed silk fabric have been studied using different combination (1:3, 1:1 and 3:1) of various mordants, such as myrobolan: nickel sulphate, myrobolan: aluminium sulphate, myrobolan: potassium dichromate, myrobolan: ferrous sulphate and myrobolan: stannous chloride. The wash, rub, light and perspiration fastness of the dyed samples have been evaluated. Design/methodology/approach – For dyeing there are three methods are used. They are Pre mordanting, Simultaneous mordanting and Post mordanting methods. Dyed silk materials are tested by using wash fastness, rub fastness, light and perspiration fastness methods. Findings – It is found that Spathodea campanulata dye can be successfully used for the dyeing of silk to obtain a wide range colours by using various combinations of mordants. With regards to colour fastness, test samples exhibit excellent fastness to washing, rubbing, except for pre-mordanting using myrobolan: potassium dichromate combination; and good to excellent fastness to perspiration in both acidic and alkaline media. Originality/value – Availability of literature related to this work is not available. The study of combination of mordants of this natural dye on silk is a new research work and the large scale preparation is definitely very useful to the society.

Sign in / Sign up

Export Citation Format

Share Document