scholarly journals Optimized Uplink Scheduling Model through Novel Feedback Architecture for Wimax Network

Broadband Wireless Access has drawn the fine attention due to the wide range of data requirement and user mobility all the time. Moreover, WiMAX provides the best QoE (Quality of Experience) which is based on the IEEE 802.16 standards; this includes several services such as data, video and audio. However, in order to provide the effective and smooth experience i.e. QoS scheduling plays one of the critical part. In past several mechanism has been proposed for effective scheduling however, through the research it is observed that it can be furthermore improvised hence in this we propose a mechanism named as OUS (Optimized Uplink Scheduling) which helps in improvising the QoS. In here, we have proposed a novel feedback architecture and proposed optimized scheduling which helps in computing the bandwidth request this in terms helps in reducing the delay as well as jitter. Moreover, the performance evaluation is performed through extensive simulation by varying the different SS and frequency and the results analysis confirms that our mechanism performs way better than the existing algorithm.

Author(s):  
Mohannad Alahmadi ◽  
Peter Pocta ◽  
Hugh Melvin

Web Real-Time Communication (WebRTC) combines a set of standards and technologies to enable high-quality audio, video, and auxiliary data exchange in web browsers and mobile applications. It enables peer-to-peer multimedia sessions over IP networks without the need for additional plugins. The Opus codec, which is deployed as the default audio codec for speech and music streaming in WebRTC, supports a wide range of bitrates. This range of bitrates covers narrowband, wideband, and super-wideband up to fullband bandwidths. Users of IP-based telephony always demand high-quality audio. In addition to users’ expectation, their emotional state, content type, and many other psychological factors; network quality of service; and distortions introduced at the end terminals could determine their quality of experience. To measure the quality experienced by the end user for voice transmission service, the E-model standardized in the ITU-T Rec. G.107 (a narrowband version), ITU-T Rec. G.107.1 (a wideband version), and the most recent ITU-T Rec. G.107.2 extension for the super-wideband E-model can be used. In this work, we present a quality of experience model built on the E-model to measure the impact of coding and packet loss to assess the quality perceived by the end user in WebRTC speech applications. Based on the computed Mean Opinion Score, a real-time adaptive codec parameter switching mechanism is used to switch to the most optimum codec bitrate under the present network conditions. We present the evaluation results to show the effectiveness of the proposed approach when compared with the default codec configuration in WebRTC.


2020 ◽  
Vol 150 ◽  
pp. 367-377 ◽  
Author(s):  
Palash Roy ◽  
Anika Tahsin ◽  
Sujan Sarker ◽  
Tamal Adhikary ◽  
Md. Abdur Razzaque ◽  
...  

Author(s):  
Anatoly Maslak

The quality of the questionnaire as a measuring tool largely determines the relevance of the results. The aim of the work is to analyze the quality of the questionnaire as a measuring tool used to evaluate the latent variable "leadership qualities of students". The study was conducted within the framework of the theory of measurement of latent variables, which has important advantages. First of all, the latent variable is determined operationally, through a set of indicators (questionnaire items), the more indicators, the higher the accuracy of the latent variable measurement. The latent variable and indicators are measured on the same interval scale in logits. This allows the use of a wide range of statistical procedures for the analysis of measurement results. The analysis of the following aspects of the quality of the questionnaire as a measuring tool: the presence of extreme indicators in the test, the compatibility of a set of indicators, the compliance of the questionnaire to the level of students on the measured latent variable, the uniformity of the distribution of indicators on the interval scale. The indicators that differentiate students with high and low levels of leadership qualities better than others are highlighted. Recommendations on the adjustment of the questionnaire as a measuring tool for assessing the leadership qualities of students are given. 


2021 ◽  
Vol 10 (6) ◽  
pp. 3202-3210
Author(s):  
Sameer A. S. Lafta ◽  
Mohaned Mahdi Abdulkareem ◽  
Raed Khalid Ibrahim ◽  
Marwah M. Kareem ◽  
Adnan Hussein Ali

The universal mobile telecommunications system (UMTS) has distinct benefits in that it supports a wide range of quality of service (QoS) criteria that users require in order to fulfill their requirements. The transmission of video and audio in real-time applications places a high demand on the cellular network, therefore QoS is a major problem in these applications. The ability to provide QoS in the UMTS backbone network necessitates an active QoS mechanism in order to maintain the necessary level of convenience on UMTS networks. For UMTS networks, investigation models for end-to-end QoS, total transmitted and received data, packet loss, and throughput providing techniques are run and assessed and the simulation results are examined. According to the results, appropriate QoS adaption allows for specific voice and video transmission. Finally, by analyzing existing QoS parameters, the QoS performance of 4G/UMTS networks may be improved.


2020 ◽  
Vol 321 ◽  
pp. 03015
Author(s):  
Anthony Beckers ◽  
Gokula Krishna Muralidharan ◽  
Karel Lietaert ◽  
Nachiketa Ray ◽  
Pierre Van Cauwenbergh ◽  
...  

Direct Metal Printing (DMP) or Laser Based Powder Bed Fusion (L-BPF) enables manufacturing of highly complex geometries which are used in a wide range of applications - healthcare to aerospace. Producing these products with excellent and consistent part quality in terms of density and mechanical properties is key. DMP ProX® 320 machine has been used for over 10 years for this purpose. In this study, the key improvements made on the process stability for targeting consistent build quality across build platform and repeatability have been evaluated. The quality is assessed by determining the density, mechanical properties and surface roughness of direct metal printed LaserForm® Ti gr23 (A). The main finding from the study is that the use of the optimized gas flow enables production of LaserForm® Ti gr23 (A) with consistent and improved mechanical properties across the whole build platform. Moreover, there is no need any more for hot isostatic pressing to ensure good fatigue properties. The elongation strain to failure increased by 15 % to 20 %, which is 4-5 % higher than ASTM F3001 specifications. The axial fatigue limit (5x106 loading cycles) was 637 MPa (R=0.1), which is as good as or even better than annealed wrought Ti6Al4V.


Author(s):  
Hasanah Putri ◽  
Tri Nopiani Damayanti ◽  
Rohmat Tulloh

LTE (Long Term Evolution) is a Broadband Wireless Access (BWA) technology that allows high speed and a wide range of access. LTE is designed to meet the needs for Quality of Service (QoS), i.e. the ability to download up to 300 Mbps and upload up to 75 Mbps. This study investigated the impacts of user mobility on the LTE network for video streaming services. The approach employed in this study included multi-user with Distributed AntennaSystem (DAS) and various variations of user mobility speed. Observations were made on the condition of the user moving from one cell to another so that the handover occurred. The throughput value will increase by 33% and 47% when the user’s distances are respectively 1250 m and 2000 m from eNode B. In addition, the delay value will reduce by 66.32% an 67.58% when the user’s distances are respectively 1250 m and 2000 m from eNode B. Moreover, the PDR value will increase by 48.74% and 55.45% when the user’s distances are respectively 1250 m and 2000 m from eNode B. The use of a distributed antenna system (DAS) model on LTE network has resulted in improved quality of performance when the user streams a video.


2021 ◽  
Author(s):  
◽  
Ashley D M Coutts

<p><b>The importance of vessel biofouling as a vector for the dispersal of non-indigenousmarine species (NIMS) is only just beginning to receive international attention. At thetime of commencing this study, there was a considerable lack of knowledge surroundingwhich vessels, hull locations, levels and types of biofouling pose the greatestbiosecurity risk. Therefore, the aim of this study was to investigate the nature, extentand survivorship of biofouling organisms on various vessel types at different hulllocations and offers a pragmatic risk assessment approach for managing this threat.</b></p> <p>The results of this thesis found that the recruitment, persistence, distribution, abundanceand species composition of biofouling on vessel hulls is influenced by many factorsincluding: 1) the presence/absence, age and type of anti-fouling coating; 2) voyageduration and route; and 3) port residency period. Therefore, higher levels of biofouling(species richness, percentage cover, and biomass), including NIMS are more likely toaccumulate and persist on vessels (and in hull locations) that: 1) lack and/or possess old,ineffective, damaged, inappropriate or unsuitable anti-fouling coatings; 2) spendprolonged periods stationary in ports; 3) travel at slow speeds (i.e. <10 knots); 4) haveshort voyage durations; and 5) remain at similar latitudes.</p> <p>Prevention is clearly better than a cure, hence the correct application and maintenanceof suitable anti-fouling coatings to the entire submerged hull surface of vessel hulls,including niche areas is the most cost-effective way of minimising the unwantedtranslocation of biofouling organisms and NIMS. However, the results of this thesisdemonstrate that if biofouling organisms colonise and establish on a vessel's hull,voyage speed alone is not capable of providing a reliable secondary level of defenceagainst the unwanted dispersal of NIMS. Clearly, the survivorship of biofoulingorganisms was highest amongst vessels that travelled at slow and medium speeds (e.g.</p> <p><10 knots). Therefore, given that accumulation of biofouling follows a successionalprocess and NIMS are more likely to be associated with higher levels of biofouling,vessels that travel at slow and medium speeds are more likely to pose the greatest riskof translocating NIMS on a vessel by vessel scale. However, despite the observationthat faster vessels reduce the diversity, quantity and quality of sessile biofoulingorganisms in laminar flow areas of the hull, a wide range of sessile, sedentary andmobile organisms were still cable of survival in areas protected from harsh hydrodynamically forces commonly referred to as niche areas, particularly within sea-chests.</p>


1996 ◽  
Vol 465 ◽  
Author(s):  
A. P. Varlakov ◽  
I. A. Sobolev ◽  
A. S. Barinov ◽  
S. A. Dmitriev ◽  
S. V. Karlin ◽  
...  

ABSTRACTTo solve the problem of silts and soils that are contaminated with radioactive and toxic substances, the following method has been developed at SIA RADON. The material is mixed with limestone and other components, including up to 70 % (mass) of dried residue of liquid radioactive waste. The mixture is heated at 800 to 1000 °C, shredded, and used to form cement. This cementation process may be used to treat radioactive or other chemical waste.The work demonstrated that in the case of silts, for example, the product volume is reduced by a factor of 1.5 to 3 compared to the initial silts volume. A fast hardening, durable product is obtained, the quality of which is not inferior to that obtained by using the traditional binders. For some parameters, e.g., hardening rate and macroelement leaching, the current method is significantly better than the traditional cementation process. It has also been demonstrated that, over a wide range of parameters, when dry residue of liquid radioactive waste is used in the initial mixture, the part of NOxCan be reduced to nitrogen, thereby reducing NOx emissions.


2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Mingfu Li

To improve the playout quality of video streaming services, several adaptive media playout (AMP) mechanisms were proposed in literature. However, all performance evaluations and comparisons for AMPs were made in terms of quality of service (QoS) metrics. As one knows, there may exist a trade-off between QoS metrics, such as buffer underflow and overflow performance. Thus, it is not sufficient to only evaluate the performance of AMPs in terms of QoS metrics. In this paper, we will evaluate and compare the performance of several AMPs from the aspect of quality of experience (QoE). Numerical results will show that some existing AMP systems do not perform better than the nonadaptive playout system from the point of view of overall QoE.


2021 ◽  
Author(s):  
◽  
Ashley D M Coutts

<p><b>The importance of vessel biofouling as a vector for the dispersal of non-indigenousmarine species (NIMS) is only just beginning to receive international attention. At thetime of commencing this study, there was a considerable lack of knowledge surroundingwhich vessels, hull locations, levels and types of biofouling pose the greatestbiosecurity risk. Therefore, the aim of this study was to investigate the nature, extentand survivorship of biofouling organisms on various vessel types at different hulllocations and offers a pragmatic risk assessment approach for managing this threat.</b></p> <p>The results of this thesis found that the recruitment, persistence, distribution, abundanceand species composition of biofouling on vessel hulls is influenced by many factorsincluding: 1) the presence/absence, age and type of anti-fouling coating; 2) voyageduration and route; and 3) port residency period. Therefore, higher levels of biofouling(species richness, percentage cover, and biomass), including NIMS are more likely toaccumulate and persist on vessels (and in hull locations) that: 1) lack and/or possess old,ineffective, damaged, inappropriate or unsuitable anti-fouling coatings; 2) spendprolonged periods stationary in ports; 3) travel at slow speeds (i.e. <10 knots); 4) haveshort voyage durations; and 5) remain at similar latitudes.</p> <p>Prevention is clearly better than a cure, hence the correct application and maintenanceof suitable anti-fouling coatings to the entire submerged hull surface of vessel hulls,including niche areas is the most cost-effective way of minimising the unwantedtranslocation of biofouling organisms and NIMS. However, the results of this thesisdemonstrate that if biofouling organisms colonise and establish on a vessel's hull,voyage speed alone is not capable of providing a reliable secondary level of defenceagainst the unwanted dispersal of NIMS. Clearly, the survivorship of biofoulingorganisms was highest amongst vessels that travelled at slow and medium speeds (e.g.</p> <p><10 knots). Therefore, given that accumulation of biofouling follows a successionalprocess and NIMS are more likely to be associated with higher levels of biofouling,vessels that travel at slow and medium speeds are more likely to pose the greatest riskof translocating NIMS on a vessel by vessel scale. However, despite the observationthat faster vessels reduce the diversity, quantity and quality of sessile biofoulingorganisms in laminar flow areas of the hull, a wide range of sessile, sedentary andmobile organisms were still cable of survival in areas protected from harsh hydrodynamically forces commonly referred to as niche areas, particularly within sea-chests.</p>


Sign in / Sign up

Export Citation Format

Share Document