scholarly journals Design, Analysis and Implementation of a Novel Soft-Switched Bridgeless Interleaved Boost PFC Converter

2019 ◽  
Vol 8 (2) ◽  
pp. 3930-3935
Keyword(s):  
Power Factor ◽  
Electromagnetic Interference ◽  
Soft Switching ◽  
Current Harmonics ◽  
Zero Voltage Switching ◽  
Switching Losses ◽  
Interleaved Boost Converter ◽  
Ripple Reduction ◽  
Source Voltage ◽  
Zero Voltage

In the modern era, the electronic equipments are widely used and it is required to maintain the supply current harmonics within the standards specified by IEC. Efforts are taken to get better power factor of these supplies using Bridgeless Interleaved Boost Converter (IBC) topology. The efficiency and the power factor of the bridgeless converter is improved in contrast to the conventional PFC as the bridged structure is eliminated. Main objective of the paper is to propose a novel Zero Voltage Switched Bridgeless IBC. This bridgeless configuration is investigated by analyzing the attributes such as output power, mark-space ratio, source voltage, input current with each other. With zero-voltage switching, the voltage regulator can engage in soft switching, which helps to minimize switching losses and electromagnetic interference. This paper also compares performance parameters such as power factor, efficiency, THD and ripple with and without ZVS in a bridgeless IBC circuit. The results show that there is a considerable ripple reduction and power factor improvement with increase in efficiency on incorporating soft switching. Replication of the projected circuit is executed in simulation and the outputs are verified using hardware implementation.

scholarly journals Positive output elementary Luo converter for fixed-frequency ZVS operation

2017 ◽  
Vol 65 (2) ◽  
pp. 255-262
Author(s):  
S. J. V. Bright ◽  
S. Ramkumar ◽  
H. Anand
Keyword(s):  
Electromagnetic Interference ◽  
Experimental Studies ◽  
Soft Switching ◽  
Switching Frequency ◽  
Fixed Frequency ◽  
Zero Voltage Switching ◽  
Power Semiconductor ◽  
Semiconductor Switches ◽  
Switching Losses ◽  
Zero Voltage

Abstract Luo converter is one amid the developed DC-DC converters offering higher voltage gain. Soft-switching techniques, like zero-voltage switching (ZVS), repress switching losses, and hence the system efficiency and the life of the power semiconductor switches are improved. Incorporation of soft switching in fixed-frequency operation of the Luo converters may persuade them in the regulated power supply applications. The existing variable switching frequency solution suffers from a number of problems viz. complexity in filter designing, more electromagnetic interference (EMI), etc. This paper proposes a positive output elementary Luo converter (POELC) involving ZVS with the wherewithal of working in fixed frequency. A comprehensive discussion on the proposed circuit topology is detailed with both simulation and experimental studies. Systematic descriptions of basic POELC, variable-frequency ZVS-POELC, and fixed-frequency ZVS-POELC make an impact on the understanding of related concepts by the researchers in this field.

scholarly journals Design and operation of closed-loop triple-deck buck-boost converter with high gain soft switching

2020 ◽  
Vol 11 (1) ◽  
pp. 523
Author(s):  
S. Narasimha ◽  
Surender Reddy Salkuti
Keyword(s):  
Closed Loop ◽  
High Gain ◽  
Pi Controller ◽  
Boost Converter ◽  
Vital Role ◽  
Soft Switching ◽  
Parallel Operation ◽  
Zero Voltage Switching ◽  
Switching Losses ◽  
Zero Voltage

<span>This paper presents the design and operation of three-stage buck-boost converter with high gain soft switching using closed loop proportional integral (PI) controller. The proposed converter is designed by arranging three identical buck-boost converters working in parallel. The converter units are connected to each other by an inductor as a bridge. This inductor plays a vital role in soft switching operation of converter by maintaining the voltage applied to switches at zero voltage at switching intervals, i.e., the zero-voltage switching (ZVS). The closed-loop system is designed by PI controller, and it maintains the output constant irrespective of changes in input, and the system becomes stable. The proposed converter is efficient in reducing switching losses, leading to improved converter efficiency. Due to parallel operation of three identical converters, the output voltage and input current contain fewer ripples than those of a single converter with same specifications. Proposed converter is more economical and reliable with simpler structure as it utilizes only two inductors as extra elements. The design and analysis of proposed circuit has been carried out in MATLAB Simulink by operating the circuit in various modes.</span>

scholarly journals Analysis, Design and Experimental Validation of Modified Simple Soft Switching DC-DC Boost Converter

2015 ◽  
Vol 16 (4) ◽  
pp. 331-337 ◽  
Author(s):  
S. Raghavendran ◽  
B. Chitti Babu ◽  
Luigi Piegari
Keyword(s):  
Theoretical Analysis ◽  
Experimental Validation ◽  
Soft Switching ◽  
Zero Voltage Switching ◽  
Switching Losses ◽  
Zero Current Switching ◽  
Zero Current ◽  
Analysis Design ◽  
Zero Voltage ◽  
Voltage Switching

Abstract This paper investigates a modified simple soft switching dc-dc converter for low power applications. This simple topology uses an auxiliary switch, an inductor and a capacitor to operate the converter without switching losses. The efficiency of the converter is improved by transferring the energy that would be dissipated during the switching to the load. The main switch turns-on with zero current switching (ZCS) and turns-off with zero voltage switching (ZVS), while the auxiliary switch turns-on and turns-off with zero voltage switching (ZVS). The detailed theoretical analysis and the design equations are described. In addition to that, the analysis of proposed converter is demonstrated by both simulation and experimental results for effectiveness of the study.

AC-DC Converter with Power Factor Correction Function

2012 ◽  
Vol 241-244 ◽  
pp. 763-766
Author(s):  
Hyun Lark Do
Keyword(s):  
Power Factor ◽  
Power Factor Correction ◽  
Correction Function ◽  
Zero Voltage Switching ◽  
Switching Losses ◽  
High Power Factor ◽  
Active Clamp ◽  
Zero Voltage ◽  
Conduction Mode ◽  
Switch Voltage

An AC -DC converter with power factor correction (PFC) function is proposed in this paper. In the proposed converter, the boost PFC stage and the active-clamp DC-DC converter stage are merged into a single converter to reduce the overall cost and improve the power density. An active-clamp DC-DC converter stage can suppress the switch voltage stresses and provide zero-voltage-switching (ZVS) operation of the switches. The boost converter in PFC stage operates in discontinuous conduction mode (DCM) and it provides naturally high power factor. Due to the ZVS operation, the switching losses of the proposed converter are significantly reduced and the efficiency is improved. Steady-state analysis is performed. Simulation results are also provided to verify the effectiveness of the proposed converter.

A Novel Soft Switching Based Fuzzy Logic Control for Single Phase Inverter

2014 ◽  
Vol 573 ◽  
pp. 143-149
Author(s):  
N. Ismayil Kani ◽  
B.V. Manikandan ◽  
Prabakar Perciyal
Keyword(s):  
Fuzzy Logic ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Soft Switching ◽  
Switching Frequency ◽  
Pwm Inverter ◽  
Zero Voltage Switching ◽  
Control Scheme ◽  
Zero Voltage ◽  
Voltage Switching

—This The Pulse Width Modulation (PWM) DC-to-AC inverter has been widely used in many applications due to its circuit simplicity and rugged control scheme. It is however driven by a hard-switching pulse width modulation (PWM) inverter, which has low switching frequency, high switching loss, high electro-magnetic interference (EMI), high acoustic noise and low efficiency, etc. To solve these problems of the hard-switching inverter, many soft-switching inverters have been designed in the past. Unfortunately, high device voltage stress, large dc link voltage ripples, complex control scheme and so on are noticed in the existing soft-switching inverters. This proposed work overcomes the above problems with simple circuit topology and all switches work in zero-voltage switching condition. Comparative analysis between conventional open loop, PI and fuzzy logic based soft switching inverter is also presented and discussed. Keywords—Zero voltage switching, Inverter, Dc link, PI controller, Fuzzy logic system control ,Modulation strategy, Soft switching

A Novel High Power Factor Soft-Switching Converter

2012 ◽  
Vol 433-440 ◽  
pp. 5549-5555
Author(s):  
Yun Tao Yue ◽  
Yan Lin
Keyword(s):  
Power Factor ◽  
High Power ◽  
Power Supply ◽  
High Efficiency ◽  
Soft Switching ◽  
Switching Converter ◽  
Turn On ◽  
High Power Factor ◽  
Power Factor Corrector ◽  
Zero Voltage

A novel scheme of low power communication power supply with high power factor and soft-switching is presented, a power factor corrector and dc/dc converter of passive lossless soft-switching is based on a ML4803 IC control. DC/DC converter introduces a novel two-transistor forward soft-switching technique, which realizes zero-voltage turn-on and turn-off, with no additional switches. a communication power supply module is developed in this paper. It has the characteristics of rapid dynamic response, high power factor, high efficiency and small bulk ect.

scholarly journals A Control Strategy for Bidirectional Isolated 3-Phase Current-Fed Dual Active Bridge Converter

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 214 ◽  
Author(s):  
Dong-Min Lee ◽  
Seung-Wook Hyun ◽  
Jin-Wook Kang ◽  
Yong-Su Noh ◽  
Chung-Yuen Won
Keyword(s):  
Pulse Width Modulation ◽  
Soft Switching ◽  
Zero Voltage Switching ◽  
Phase Current ◽  
Dual Active Bridge ◽  
Circulating Current ◽  
Operation Techniques ◽  
Simulation And Experiment ◽  
Output Capacitor ◽  
Zero Voltage

This paper examines the characteristics of the zero voltage switching (ZVS) and zero voltage transition (ZVT) soft-switching applied in the 3-phase current fed dual active bridge (3P-CFDAB) converter, which combines the advantages of the dual active bridge (DAB) converter and current-fed full bridge (CFFB) converter. When an active clamp circuit is added to the CFFB converter, the circuit configuration of the DAB converter is shown in part of the entire circuit. This allows the use of pulse width modulation (PWM) techniques which combine the PWM techniques of both the DAB converter and CFFB converter. The proposed converter performs both duty and phase control at the same time in order to reduce the circulating current and ripple current of the output capacitor, which are the disadvantages of the CFFB converter and DAB converter. In addition, the ZVS and ZVT soft switching areas were analyzed by means of the phase current and leakage inductor current in each transformers. To verify the principle and feasibility of the proposed operation techniques, a simulation and experiment were implemented with the 3P-CFDAB.

scholarly journals Design and Implementation of 2.5kW IBFB-LLC DC/ DC Converter Using SiC Mosfet

2021 ◽  
Vol 31.2 (149) ◽  
pp. 7-14
Keyword(s):  
High Frequency ◽  
Power Flow ◽  
Input Voltage ◽  
Voltage Range ◽  
Zero Voltage Switching ◽  
Design And Implementation ◽  
Switching Losses ◽  
Power Switches ◽  
Isolation Transformer ◽  
Zero Voltage

Interleaved Boost Full Bridge integrated LLC resonant (IBFB- LLC) is an isolated DC/DC converter with directional power flow, which can cope with a wide input voltage range of PV applications. The main losses of the converter are switching losses of the power switches and transformers losses. This paper proposes a method to improve the efficiency of the IBFB converter due to zero voltage switching technique, in combination with employing new SiC MOSFET technology instead of the conventional Si MOSFET. In addition, Litz wire is also adopted to reduce the losses on the high frequency isolation transformer. Both numerical simulations and experiments with a prototype 2.5kW converter are implemented to verify the feasibility and effectiveness of the proposed solution.

Sign in / Sign up

Export Citation Format

Share Document