scholarly journals Effects of Jet Flow Pulsation on Diffusion Flame Performance

2020 ◽  
Vol 9 (4) ◽  
pp. 444-451
Keyword(s):  
Heat Transfer ◽  
Heat Release ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Turbulent Flame ◽  
Flame Temperature ◽  
Combustion Efficiency ◽  
Heat Fluxes ◽  
Pulsating Flow ◽  
Flow Pulsation

The objective of the current research is the experimental investigation of the pulsating flow effects on the combustion performance in terms of the flame temperature distribution, the heat transfer rate, the combustion efficiency and the exhaust gas analysis. The flow pulsation provided through a rotary ball valve in accordance with a variable speed motor arrangement increased the flame temperature fluctuation and the magnitude of heat release. The flow pulsation provides a highly turbulent flame wherein the vortices are enlarged. Increasing Strouhal number [St] of the LPG fuel and air flow increases the time-averaged flame temperature of the pulsating flame up to a saturation level that is dictated by the heat transfer rate enhancement. The maximum average flame temperature is 1263oC at St= 0.041, r= 0 mm and 100 mm from the burner inlet. In addition, increasing the pulsating flow amplitude increases the convection and radiation heat fluxes from the pulsating flame. While increasing the pulsation decreases the exhaust UHC due to increasing the turbulent kinetic energy across the pulsating flame, the exhaust NOx slightly increases due to increasing the heat release rate and the flame temperatures. Pulsation thus enhances the combustion efficiency inside the industrial combustors

An Investigation of Thermal and Velocity Fields for a Confined Jet Over the RE Range of 1,000-24,000

2008 ◽  
Author(s):  
N. Jeffers ◽  
J. Punch ◽  
E. Walsh
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Local Heat Transfer ◽  
Local Heat ◽  
High Heat ◽  
Heat Fluxes ◽  
Hydrodynamic Characteristics ◽  
Plate Spacing ◽  
High Heat Transfer

Contemporary electronic systems currently generate high heat fluxes at component level. Impingement cooling is an effective way to generate high heat transfer coefficients in order to meet thermal constraints. This paper investigates the heat transfer and hydrodynamic characteristics of a confined impinging liquid jet with a nozzle-to-plate spacing (H/D) ratio of 0.5. A custom measurement facility was created to infer local heat transfer rates from infra-red images of a jet impinging on a 12.5μm thick stainless steel foil configured to generate uniform heat flux. Particle-Image Velocimetry (PIV) was performed in order to obtain quantitative velocity data within the jet. A series of experiments were run for Reynolds numbers (Re) in the range of 1,000–24,000 for a jet of 8 mm diameter (D). For Re > 4,000, the local heat transfer rate — in terms of Nusselt number (Nu) as a function of dimensionless radius (r/D) — had a plateau section between 0 < r/D < 0.6 followed by a peak at r/D ∼ 1.35. For higher Re the Nu peak exceeds that of the plateau section. For Re < 4,000, a plateau section exists between 0 < r/D < 0.4 followed by a shoulder located between 1 < r/D < 1.4. The PIV data for Re > 4,000 showed a strong vortex in the area of the secondary peak in Nu which was not present in the lower Re range. This phenomenon — the local peaks of heat transfer rate — has been previously reported in the literature with a degree of uncertainty as to the related fluid mechanics. This paper contributes to an understanding of the fluidic phenomenon responsible for the distribution of heat transfer rate in confined jets.

MIXED CONVECTIVE SLIP FLOWS IN A VERTICAL PARALLEL PLATE MICROCHANNEL WITH SYMMETRIC AND ASYMMETRIC WALL HEAT FLUXES

2012 ◽  
Vol 36 (3) ◽  
pp. 207-218 ◽  
Author(s):  
Hamid Niazmand ◽  
Behnam Rahimi
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Friction Coefficient ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Parallel Plate ◽  
Flux Ratio ◽  
Heat Fluxes ◽  
Temperature Fields ◽  
Slip Flows

Mixed convective gaseous slip flows in an open-ended vertical parallel-plate channel with symmetric and asymmetric wall heat fluxes are numerically investigated. Buoyancy effects on developing and fully developed solutions are studied using the SIMPLE algorithm. The velocity and temperature fields are examined for different values of Knudsen number, mixed convection parameter and heat flux ratio. It is found that increasing Gr/Re leads to an increase in the heat transfer rate and friction coefficient. Also, rarefaction effects decrease the heat transfer rate and friction coefficient. The friction coefficient decreases with an increase in heat flux ratio.

Characterisation of a plate heat exchanger chevron type with carbon-based nanofluids under pulsed condition

2021 ◽  
pp. 095440622110426
Author(s):  
Amina Hmoud Alasady ◽  
Mohammad Javad Maghrebi
Keyword(s):  
Heat Transfer ◽  
Steady State ◽  
Pressure Drop ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Pure Water ◽  
Pulsating Flow ◽  
Steady State Flow ◽  
State Flow ◽  
Carbon Based

In industrial-thermal applications, pulsating flow along with carbon-based nanofluids is a well adopted active method, although not in plate heat exchangers (PHEs). The performance of a PHE with carbon-based nanofluids was experimentally evaluated by superimposing pulsating flow along with steady-state flow. The results demonstrated that the use of GNP-water, hybrid GNP/MWCNT-water, and MWCNT-water nanofluids with volume fractions ranging from 0.01% to 0.1% in a steady-state flow led to improved average heat-transfer rates of 1.34, 1.27, and 1.25, respectively. Furthermore, implementation of pulsating flow enhanced the average heat-transfer rate, in comparison to that of the steady-state flow in the same nanofluids, in the range of 10.9%–28.2%, 9%–25.4%, and 7.1%–14.8%, respectively. Pulsating flow in nanofluids improved heat-transfer rate more than it did in pure water owing to the enhancement of the Brownian motion of the suspended carbon-based nanoparticles. In the considered volume fractions from 0.01% to 0.1%, the pulsating flow condition increased the pressure drop by a factor of 1.48, 1.49, and 1.62 for the MWCNT-water, hybrid GNP/MWCNT-water, and GNP-water nanofluids, respectively, in comparison to pure water. The experimental results indicated that the pulsating flow had a more profound influence on the improvement of heat-transfer rate and pressure drop in the case of GNP-based nanofluid than in the others. This could be attributed to the unique platelet shape of the GNP nanoparticles and consequently the higher Brownian motion. The improvement in the heat-transfer rate, obtained through implementation of the pulsating flow condition, outweighed the cost of increase in pressure drop in all the cases. Among the nanofluids considered, the hybrid GNP/MWCNT-water nanofluid exhibited the best overall performance of 1.2.

Ferro-nanofluid squeeze film lubrication with heat transfer

2021 ◽  
pp. 135065012110276
Author(s):  
Manimegalai Kavarthalai ◽  
Vimala Ponnuswamy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Contact Time ◽  
Transfer Rate ◽  
Fluid Layer ◽  
Darcy Law ◽  
Squeeze Film ◽  
Mean Temperature ◽  
Special Cases ◽  
The Impact

A theoretical study of a squeezing ferro-nanofluid flow including thermal effects is carried out with application to bearings and articular cartilages. A representational geometry of the thin layer of a ferro-nanofluid squeezed between a flat rigid disk and a thin porous bed is considered. The flow behaviours and heat transfer in the fluid and porous regions are investigated. The mathematical problem is formulated based on the Neuringer–Rosensweig model for ferro-nanofluids in the fluid region including an external magnetic field, Darcy law for the porous region and Beavers–Joseph slip condition at the fluid–porous interface. The expressions for velocity, fluid film thickness, contact time, fluid flux, streamlines, pathlines, mean temperature and heat transfer rate in the fluid and porous regions are obtained by using a perturbation method. An asymptotic solution for the fluid layer thickness is also presented. The problem is also solved by a numerical method and the results by asymptotic analysis, perturbation and numerical methods are obtained assuming a constant force squeezing state and are compared. It is shown that the results obtained by all the methods agree well with each other. The effects of various parameters such as Darcy number, Beavers–Joseph constant and magnetization parameter on the flow behaviours, contact time, mean temperature and heat transfer rate are investigated. The novel results showing the impact of using ferro-nanofluids in the two applications under consideration are presented. The results under special cases are further compared with the existing results in the literature and are found to agree well.

scholarly journals Significance of Shape Factor in Heat Transfer Performance of Molybdenum-Disulfide Nanofluid in Multiple Flow Situations; A Comparative Fractional Study

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3711
Author(s):  
Asifa ◽  
Talha Anwar ◽  
Poom Kumam ◽  
Zahir Shah ◽  
Kanokwan Sitthithakerngkiet
Keyword(s):  
Heat Transfer ◽  
Skin Friction ◽  
Molybdenum Disulfide ◽  
Heat Transfer Rate ◽  
Shape Factor ◽  
Transfer Rate ◽  
Maximum Heat ◽  
Left Wall ◽  
Maximum Heat Transfer ◽  
Mos2 Nanoparticles

In this modern era, nanofluids are considered one of the advanced kinds of heat transferring fluids due to their enhanced thermal features. The present study is conducted to investigate that how the suspension of molybdenum-disulfide (MoS2) nanoparticles boosts the thermal performance of a Casson-type fluid. Sodium alginate (NaAlg) based nanofluid is contained inside a vertical channel of width d and it exhibits a flow due to the movement of the left wall. The walls are nested in a permeable medium, and a uniform magnetic field and radiation flux are also involved in determining flow patterns and thermal behavior of the nanofluid. Depending on velocity boundary conditions, the flow phenomenon is examined for three different situations. To evaluate the influence of shape factor, MoS2 nanoparticles of blade, cylinder, platelet, and brick shapes are considered. The mathematical modeling is performed in the form of non-integer order operators, and a double fractional analysis is carried out by separately solving Caputo-Fabrizio and Atangana-Baleanu operators based fractional models. The system of coupled PDEs is converted to ODEs by operating the Laplace transformation, and Zakian’s algorithm is applied to approximate the Laplace inversion numerically. The solutions of flow and energy equations are presented in terms of graphical illustrations and tables to discuss important physical aspects of the observed problem. Moreover, a detailed inspection on shear stress and Nusselt number is carried out to get a deep insight into skin friction and heat transfer mechanisms. It is analyzed that the suspension of MoS2 nanoparticles leads to ameliorating the heat transfer rate up to 9.5%. To serve the purpose of achieving maximum heat transfer rate and reduced skin friction, the Atangana-Baleanu operator based fractional model is more effective. Furthermore, it is perceived that velocity and energy functions of the nanofluid exhibit significant variations because of the different shapes of nanoparticles.

scholarly journals Assessment of TiO2 Nanoconcentration and Twin Impingement Jet of Heat Transfer Enhancement—A Statistical Approach Using Response Surface Methodology

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 595
Author(s):  
Mahir Faris Abdullah ◽  
Rozli Zulkifli ◽  
Hazim Moria ◽  
Asmaa Soheil Najm ◽  
Zambri Harun ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Tio2 Nanoparticle ◽  
Experimental Results ◽  
Improvement Rate ◽  
Design Expert ◽  
Impingement Jet

Impinging jets are considered to be a well-known technique that offers high local heat transfer rates. No correlation could be established in the literature between the significant parameters and the Nusselt number, and investigation of the interactions between the correlated factors has not been conducted before. An experimental analysis based on the twin impingement jet mechanism was achieved to study the heat transfer rate pertaining to the surface plate. In the current paper, four influential parameters were studied: the spacing between nozzles, velocity, concentration of Nano solution coating and nozzle-plate distance, which are considered to be effective parameters for the thermal conductivity and the heat transfer coefficient of TiO2 nanoparticle, an X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) analysis were done, which highlighted the structure and showed that the nanosolution coated the surface homogenously. Moreover, a comparison was done for the experimental results with that of the predicted responses generated by the Design Expert software, Version 7 User’s Guide, USA. A response surface methodology (RSM) was employed to improve a mathematical model by accounting for a D-optimal design. In addition, the analysis of variance (ANOVA) was employed for testing the significance of the models. The maximum Nu of 91.47, where H = S = 1 cm; Reynolds number of 17,000, and TiO2 nanoparticle concentration of 0.5% M. The highest improvement rate in Nusselt was about 26%, achieved with TiO2 Nanoparticle, when S = 3 cm, H = 6 cm and TiO2 nanoparticle = 0.5 M. Furthermore, based on the statistical analysis, the expected values were found to be in satisfactory agreement with that of the empirical data, which was conducted by accounting for the proposed models’ excellent predictability. Multivariate approaches are very useful for researchers, as well as for applications in industrial processes, as they lead to increased efficiency and reduced costs, so the presented results of this work could encourage the overall uses of multivariate methods in these fields. Hypotheses: A comparison was done for the predicted responses generated by the Design Expert software with the experimental results and then studied to verify the following hypotheses: ► Preparation of three concentrations of TiO2 nanosolution was done and studied. ► The heat transfer rate could be increased by surface coating with TiO2 nanoparticle. ► The heat transfer could be improved by the impingement jet technique with suitable adjustments.

Sign in / Sign up

Export Citation Format

Share Document