scholarly journals Numerical Evaluation for Total Yield and Fruit Quality of Five LocalPrickly Pear Strains under El-Monofia Governorate Conditions

2020 ◽  
Keyword(s):  
Fruit Quality ◽  
Numerical Evaluation ◽  
Total Yield

scholarly journals Effect of different staking methods and stem pruning on yield and quality of summer tomato

2016 ◽  
Vol 41 (3) ◽  
pp. 419-432
Author(s):  
MS Alam ◽  
N Islam ◽  
S Ahmad ◽  
MI Hossen ◽  
MR Islam
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Block Design ◽  
Total Yield ◽  
Point Of View ◽  
Fruit Firmness ◽  
Economic Point ◽  
Yield And Quality ◽  
Agriculture Research Institute

The study was carried out during summer of 2012 with BARI hybrid tomato 4, planted in the Olericulture farm of Bangladesh Agriculture Research Institute, Joydebpur, Gazipur, Bangladesh to find out the response of plants to some staking and pruning treatments on yield, fruit quality and cost of production. A two factor experiment consisting of three staking methods and four level of pruning, laid out in complete block design with three repetitions. Plants were staked on inverted „V? shaped staking, high platform and string. The plants were pruned to two stem, three stem, four stem and no pruning as control. Results showed that significantly the highest total number of fruits per plant (37.1), marketable fruits per plant (33.7), yield per plant (1.68 kg) and total yield (44.6 t/ha) were produced by the plants having the treatment string staking with four stem. The highest fruit set (43.50%) was found in the plants staking with string having three stems. Plants grown on string staking allowing two stem gave the maximum length (4.71 cm), diameter (4.83 cm) and weight (53.4g) of single fruit as well as maximum fruit firmness (3.43 kg-f cm-2). From the economic point of view, it was apparent that summer tomato produced by string staking with four stem pruning exhibited better performance compared to other treatment combinations in relation to net return and BCR (2.10).Bangladesh J. Agril. Res. 41(3): 419-432, September 2016

scholarly journals Deficit Irrigation to Enhance Fruit Quality of the ‘African Rose’ Plum under the Egyptian Semi-Arid Conditions

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1405
Author(s):  
Islam F. Hassan ◽  
Maybelle S. Gaballah ◽  
Hanan M. El-Hoseiny ◽  
Mohamed E. El-Sharnouby ◽  
Shamel M. Alam-Eldein
Keyword(s):  
Fruit Quality ◽  
Deficit Irrigation ◽  
Total Yield ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Limited Information ◽  
Yield And Quality ◽  
Arid Conditions ◽  
Semi Arid

Evolved in South Africa and released to market in 2009, the ‘African Rose’ plum has been introduced and grown under the Egyptian semi-arid conditions since 2010. Within that time, this cultivar has faced significant fruit quality issues, mainly poor color and low total soluble solids (TSS). Several trials using foliarly applied growth regulators have been conducted, but with little conspicuous results on fruit yield and quality. There is very limited information about the relationship between irrigation regime and fruit quality for this cultivar. Therefore, a field experiment was conducted to study the effect of deficit irrigation on the quality of the ‘African Rose’ plum during the 2019 and 2020 seasons. Five-year-old hedge growing trees were subjected to three deficit irrigation regimes: 100% (control), 80%, and 60% of the crop evapotranspiration (ETc) after the pit hardening stage until the end of the harvest season (May to June period) were evaluated. Results indicated that deficit irrigation positively enhanced the levels of abscisic acid (ABA), total phenols, and anthocyanins with improved fruit TSS and maturity index, although fruit yield, acidity, size, and firmness were decreased. Deficit irrigation could be suggested as a sustainable novel solution to improve the fruit quality of the ‘African Rose’ plum grown under the semi-arid conditions of Egypt. Although the total yield and some quality characteristics were not improved, the early harvested fruit with enhanced color and taste could be a good start for additional research to solve other quality-related issues under such conditions.

scholarly journals Planting density and yield of sweet pepper grown in an organic system

2021 ◽  
Vol 56 ◽  
Author(s):  
André Wagner Barata Silva ◽  
Bruno Diniz Nogueira da Silva ◽  
Ariana Lemes da Costa ◽  
Kaique Castro Cézar ◽  
Luiz Antônio Augusto Gomes ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Production System ◽  
Total Yield ◽  
Fruit Size ◽  
Sweet Pepper ◽  
Organic Production ◽  
Planting Density ◽  
Production Cycle ◽  
Organic System

Abstract The objective of this work was to evaluate the yield and fruit quality of sweet pepper (Capsicum annuum) genotypes grown at various planting densities, in an organic production system under protected cultivation. The experiment was carried out in duplicate, to compare the yield and fruit quality of the 'TE 300', 'Mallorca', and ‘Timor’ sweet pepper genotypes, at the densities of 2, 4, 6, and 8 plants m-2. A randomized complete block design was used, with three replicates, in split plots. Mean fruit size and mass, yield per plant, and total yield were measured. Dunnett’s test was used to compare means between the standard density of 2 plants m-2 and the other densities. Scott-Knott’s test was used to compare the densities within each genotype. The increase of planting density in the organic production system provided a yield similar to that of the conventional system. A greater density increases yield and reduces the production cycle, without impairing the fruit size or quality of the ‘TE 300’ and ‘Timor’ genotypes. The densities of 8 plants m-2 for ‘TE 300’ and 'Timor', and of 6 plants m-2 for ‘Mallorca’ show the highest total yield per hectare.

scholarly journals Trellising System and Cane Density Affect Yield and Fruit Quality of Red Raspberry

HortScience ◽  
2000 ◽  
Vol 35 (7) ◽  
pp. 1215-1219 ◽  
Author(s):  
Justine E. Vanden Heuvel ◽  
John T.A. Proctor ◽  
J. Alan Sullivan
Keyword(s):  
Fruit Quality ◽  
Yield Components ◽  
Unit Area ◽  
Total Yield ◽  
Rubus Idaeus ◽  
Yield Potential ◽  
Light Penetration ◽  
Red Raspberry ◽  
Southern Ontario

Trellising and cane density treatments were applied to vigorous raspberry (Rubus idaeus L.) cv. Titan plants in Southern Ontario to determine their effects on yield, yield potential, and canopy microclimate during the 1997 and 1998 seasons. The trellising treatments compared were hedgerow (control), V-trellis, and single-sided shift-trellis (shift-trellis). Cane densities (9, 16, 23, and 30 canes/m2) were established before budbreak each season. The treatments significantly affected yield and yield components. Path analysis indicated that interrelationships among yield components were significantly affected by trellising system. In the second season, plants trained on the V-trellis yielded more than did those in a hedgerow system, while those trained on a shift-trellis had the lowest yield because of a smaller fruiting framework. Fruit quality was lower on the shifttrellis than in the other two systems. These differences were related to light penetration into the three canopies. While an optimum cane density was not found for any system, the maximum cane density (30 canes/m2) produced the highest yields. Yield potential per cane decreased as cane density increased; however, the increase in cane number compensated for this decrease, resulting in an increase in total yield per unit area. Fruit quality also decreased as cane density increased, but cane density did not affect canopy microclimate.

scholarly journals Effect of Soil Solarization and Fumigation on Productivity and Fruit Quality of Strawberry

HortScience ◽  
2006 ◽  
Vol 41 (4) ◽  
pp. 972B-972
Author(s):  
Mohamed Ragab
Keyword(s):  
Ascorbic Acid ◽  
Fruit Quality ◽  
Methyl Bromide ◽  
Root Length ◽  
Total Yield ◽  
Soluble Solids ◽  
Crown Diameter ◽  
Number Of Leaves ◽  
And Control

A study of solarization and fumigation with methyl bromide (MB) on productivity and fruit quality of strawberry were investigated during two successive seasons of 2002–03. There were nine treatments: fumigation with methyl bromide (MB), solarization, their combination, and Nemaless. Results demonstrate that plant height, number of leaves per plant, average leaf area, root length, and crown diameter were significantly increased by fumigation with MB as compared with solarization or using Nemaless in the two tested seasons. Significant increments were obtained also in early and total yield, as well as total soluble solids and ascorbic acid when soil was fumigated with MB compared with solarization or using Nemaless. The highest total yield found with treatments was MB at 70 g/m2, followed by MB at 50 g/m2, 2-month solarization plus MB at 30 g/m2, 1 month plus MB at 30 g/m2, MB at 30 g/m2, 2 months solarization, one month solarization, Nemaless, and control in the both tested seasons, respectively. Nemaless caused significant increments in early and total yield compared with the control in the two tested seasons. The results of this study provide evidence to suggest that a better understanding of different fumigation methods may aid us in the efforts to improve management of strawberry production.

scholarly journals Yield and quality of tomato grown in a hydroponic system, with different planting densities and number of bunches per plant

2018 ◽  
Vol 48 (4) ◽  
pp. 340-349 ◽  
Author(s):  
Flávio Barcellos Cardoso ◽  
Herminia Emilia Prieto Martinez ◽  
Derly José Henriques da Silva ◽  
Carla do Carmo Milagres ◽  
José Geraldo Barbosa
Keyword(s):  
Fruit Quality ◽  
Plant Density ◽  
Irrigation System ◽  
Block Design ◽  
Total Yield ◽  
Fresh Mass ◽  
Planting Density ◽  
High Yield ◽  
Hydroponic System

ABSTRACT Obtaining a high yield of good quality fruits is one of the main challenges of the tomato crop. The enhancement in plant density promotes a reduction in the fruit fresh mass and an increase the yield per area. On the other hand, commercialization parameters take into account number and fresh mass of fruits. This study aimed at evaluating the yield and fruit quality of indeterminate growth hybrid tomato (Rebeca), cultivated in a hydroponic system, with different planting densities and number of bunches per plant. The experiment was conducted under greenhouse conditions, in a sub-irrigation system containing expanded clay as substrate. A split-plot randomized block design, with three replications, was used. In the plots, four planting densities (11.1 plants m-2, 8.3 plants m-2, 6.6 plants m-2 and 5.5 plants m-2) were allocated and, in the subplots, the number of bunches per plant (one or two). The total yield was influenced by the interaction planting density x number of bunches per plant. The treatment that allowed the highest yield was 11.1 plants m-2 with two bunches, with 22.61 kg m-2 or 226.1 t ha-1, in a crop cycle of 134 days. The observed variations for the nutrient contents of leaves and fruits of tomato plants with one or two bunches, at densities of 5.5-11.1 plants m-2, do not compromise the fruit quality nor influence the production of tradable fruits, using the hydroponic system.

scholarly journals Summer Pruning Affects Yield and Improves Fruit Quality of `McIntosh' Apples

1990 ◽  
Vol 115 (3) ◽  
pp. 356-359 ◽  
Author(s):  
Wesley R. Autio ◽  
Duane W. Greene
Keyword(s):  
Fruit Quality ◽  
Malus Domestica ◽  
Total Yield ◽  
Fruit Weight ◽  
Net Returns ◽  
Yield And Quality ◽  
Time Required

The effects of summer pruning on the yield and quality of apples (Malus domestica Borkh.) from mature `Rogers McIntosh'/M.7 trees were assessed in 1986-88. Summer pruning from 1 July through 1 Sept. enhanced red coloring and increased the percentage of the crop graded U.S. Extra Fancy. Fruit weight was not altered by summer pruning. Total yield was reduced by summer pruning only in 1 year, however, in no year was the harvested yield reduced. The portion of the crop that was picked in the first harvest was increased by summer pruning. Dormant-pruning time was decreased by summer pruning, and the total time required for pruning was increased only 1 of the 2 years where it was measured. Summer pruning and daminozide treatment significantly increased the estimated net returns.

scholarly journals Number of stems and plant density in mini watermelon grown in a protected environment

2019 ◽  
Vol 49 ◽  
Author(s):  
Rafaelle Fazzi Gomes ◽  
Lucas da Silva Santos ◽  
Leila Trevisan Braz ◽  
Francisco Laurimar do Nascimento Andrade ◽  
Silvia Marcela Ferreira Monteiro
Keyword(s):  
Fruit Quality ◽  
Plant Density ◽  
Block Design ◽  
Total Yield ◽  
Niche Markets ◽  
Training Systems ◽  
Randomized Block Design ◽  
Number Of Stems ◽  
Social Importance

ABSTRACT Watermelon farming has a high economic and social importance. In parallel, the consumers’ demand for distinctive products has led to niche markets, where mini watermelons stand out. This study aimed to assess the agronomic performance and fruit quality of mini watermelon grown in coconut husk fiber, as a function of number of stems per plant and plant density. The Smile hybrid was used, as well as a randomized block design, in a 2 x 2 factorial scheme, with eight repetitions, being the first factor the number of stems per plant (1 or 2) and the second the number of plants per pot (1 or 2). Characteristics related to yield, physiological parameters and fruit quality were assessed. Interaction between number of stems and plant density was only observed for leaf area, average fruit fresh weight, total yield and percentage of large fruits. The factors were evaluated separately for the remaining traits. Two-stemmed training systems, at a density of one plant per pot, produce the highest yield, without compromising the quality of the fruits, being, in these conditions, the most suitable method for farmers.

scholarly journals Influence of hand thinning of flowers and fruits on yielding and fruit quality of apples cultivar Szampion

2012 ◽  
Vol 61 (2) ◽  
pp. 141-146 ◽  
Author(s):  
Stanisław Wociór
Keyword(s):  
Cell Division ◽  
Fruit Quality ◽  
Total Yield ◽  
Fruit Weight ◽  
Fruit Setting ◽  
The Mean ◽  
Commercial Yield ◽  
Flower Thinning ◽  
Better Than

The thinning of flowers and fruit sets did not change the strength of tree growth in a signifi cant way. Szampion cv. trees on rootstock A 2 grew better than on M.7. The trees of Szampion RENO cv. grew significantly worst. The thinning of flowers and fruit sets decreased the yield from a tree and the total yield from 1 ha of the studied biological material. Flower thinning slightly increased the mean commercial yield as compared to the control trees. Thinning of 50% of flowers at the stage of the pink bud and sets after the June fall decreased the number of fruits on the trees of Szampion cv. grafted on M.7. It was only in 2004 that the flower thinning treatment significantly increased the fruit weight. Flower thinning increased the percentage of fruits with a diameter of over 7 cm in the case of Szampion cv. trees grafted on M.7. This treatment considerably (in 2006 significantly) improved fruit colouring. A positive reaction to flower thinning was also observed in Szampion RENO trees. In the case of Szampion cv., which shows a tendency to excessive fruit setting and small fruits, it is better to apply flower thinning eliminating the excess of sets in the period of cell division in growing fruits than do it later, after the June fall. The inflorescence removal treatment requires much more time than thinning of fruit sets.

Sign in / Sign up

Export Citation Format

Share Document