scholarly journals Effect of Seaweed Extract Spray on Vegetative and Flowering Growth of Two Narcissus Species

2019 ◽  
Vol 32 ◽  
pp. 134-139
Author(s):  
Ayat H.M. Al-Khuzaey ◽  
Fatimah A.H. Al-Asadi
Keyword(s):  
Agricultural Research ◽  
Block Design ◽  
Dry Weight ◽  
Seaweed Extract ◽  
Stem Length ◽  
Vase Life ◽  
Research Station ◽  
White Variety ◽  
Extract Concentration ◽  
Significant Difference

An experiment was carried out in the Cloth Canopy, Agricultural Research Station, College of Agriculture, University of Basrah, during the agricultural season 2018-2019, to study the effect of the seaweed extract spray (0, 2 and 4 m.L-1) on vegetative and flowering growth of two Narcissus species. Local white flowers (Narcissus tazetta) and the imported yellow flowers (N. eastertide). A factorial experiment with Randomized Completely Block Design (R.C.B.D) were used, with three replicates, the averages were compared using Least Significant Difference (L.S.D). When the plants reached treated at the emergence completion, leaves were sprayed to wetness full, with three times, the process was repeated every 15 days. The results showed that the white variety was significantly higher as well as plants treated with 4 m.L-1 extract showed significant superiority in all studied traits, the interaction between the white variety and spraying with seaweed extract concentration of 4 m.L-1 had a significant on the number of leaves5.00 leaf plant-1, leaf area 818 cm2, fresh and dry weights (30.16 and 15.70 g) of the vegetative total, flower stem length 45.55 cm, vase life 17.29 day.  while the interaction between the yellow species and spraying with seaweed extract concentration of 4 m.L-1 had a significant on fresh and dry weight of the flowers (16.80 and 1.73 g).

scholarly journals THE INFLUENCE OF SPRAYING WITH POTASSIUM SILICATE AND IRRIGATION WITH SALINE WATER IN SANDY SOIL ON Calendula officinalis L.

2019 ◽  
pp. 39-56
Keyword(s):  
Agricultural Research ◽  
Saline Water ◽  
Tap Water ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Potassium Silicate ◽  
Research Station ◽  
Calendula Officinalis ◽  
Calendula Officinalis L

Two pots experiments were conducted at the Experimental Farm of El-Qassasin Horticultural Research Station, Agricultural Research Center, Ismailia Governorate, Egypt, during two successive seasons of 2016/2017 – 2017/2018, to investigate the effect of potassium silicate at (0, 4, 6, and 8 cm3/l) as a foliar spray under different levels of water salinity (tap water, 1000, 2000 and 3000 ppm) on Calendula officinalis L. plant. The experiment was performed in complete randomized block design as factorial experiment with 3 replicates. The obtained results cleared that using salinity levels decreased growth parameters (plant height, number of branches/plant, fresh and dry weights of herb/plant), flowering parameters (flower diameter, number of flowers/plant, fresh and dry weight of flowers (g/plant) during eight cuts and fresh and dry weight of flowers (g/plant/season)) and chemical constituents (chlorophyll a, chlorophyll b, carbohydrate and carotenoid contents) compared to control. Moreover, the highest values in these parameters were registered by potassium silicate at 8 cm3/l concentration. Proline content increased in leaves with using saline water at 3000 ppm + potassium silicate at 8 cm3/l. Generally, it could be concluded that potassium silicate at 8 cm3/l, showed a uniform impact in alleviating inhibition of Calendula officinallis L. plant growth and productivity under moderate salinity stress condition.

Effect of plant density and detopping following silking on cob growth, fodder and grain yield of maize (Zea mays)

1992 ◽  
Vol 119 (3) ◽  
pp. 297-301 ◽  
Author(s):  
S. K. Roy ◽  
P. K. Biswas
Keyword(s):  
Grain Yield ◽  
Harvest Index ◽  
Plant Density ◽  
Agricultural Research ◽  
Dry Weight ◽  
Research Station ◽  
Maize Crop ◽  
Significant Difference ◽  
Fodder Yield ◽  
Stem Reserves

SUMMARYMaize was grown al the Regional Agricultural Research Station, Hathazari, Bangladesh during 1988/89 and 1989/90 to study fodder yield, cob growth and grain yield together with the contribution of pre-silking stem reserves to grain. Population densities were 33300, 44400 and 66600 plants/ha. Plants were either detopped after silking and pollen shedding, keeping 0, 2 or 3 leaves above the cob, or were left entire.The results showed that the maize crop could successfully be detopped for fodder with little or no adverse effect on grain yield. Fodder yield increased with increased plant density and among the detopping treatments the highest fodder yield was obtained when the plants were detopped just above the cob. Cob growth followed a sigmoid pattern and the highest dry weight per cob was obtained from the lowest plant density and from entire plants. The number of cobs/m2 increased with increased plant density but detopping treatments did not give any significant difference in relation to densities. The number of grains/cob was highest with 33300 plants/ha but, among the detopping treatments, plants detopped just above the cob had the lowest number of grains/cob in both years. Weight of 1000-grain decreased with increasing plant density but it was increased by detopping plants just above the cob during 1988/89, although it was decreased in 1989/90. The highest apparent translocation of pre-silking reserves was obtained using densities of 44400 plants/ha but detopping treatments did not show any consistent effect, although the highest apparent translocation (20%) and harvest index (58%) were obtained from plants detopped just above the cob.

scholarly journals Effects of Plant Pattern and Nitrogen Fertilizer on Yield and Yield Components of Silage Corn Cultivars

2016 ◽  
Vol 4 (1) ◽  
pp. 152
Author(s):  
Mohammad Hossein Haddadi ◽  
Masoud Mohseni
Keyword(s):  
Plant Height ◽  
Agricultural Research ◽  
Dry Weight ◽  
Forage Yield ◽  
Row Spacing ◽  
Research Station ◽  
Significant Difference ◽  
Leaf Yield ◽  
Ear Height ◽  
Better Than

To study effect of sowing pattern and nitrogen on maize silage yield and its dependents components a trial was done at split-split plot design in compeletly randomized block at four replications in Qrakheil(Qaemshahr) agricultural research station in 2015 in Iran. Row spacing was chosen as main plots including: 65cm, 75cm and 85cm.Two cultivars (Sc704 and Sc770) in sub plots and three levels of N (250, 350 and 450 kg ha1) in sub-sub plots were laid out. Silage forage yield, ear and dry ear yield, leaf and dry leaf yield, plant dry weight and stem and dry stem weight,plant height , ear height,kernel number in ear row and row number in ear were measured.The results indicated that row spacing, were not affected on investigated traits. While nitrogen effected on silage yield, ear and dry ear yield, leaf and dry leaf yield, plant dry weight and stem and dry stem weight, plant height and ear height and showed significant difference. Sc704 had significant difference on plant silage weight, dry and wet stem weight with Sc770. Amount of 350kg/ha nitrogen was caused the most silage yield (36.74t/ha) and plant dry weight (16.64 t/ha) that had not significant difference with usage of 450kg/ha nitrogen(16.46 t/ha). Amount of 450kg/ha nitrogen was caused the most silage yield (37.30t/ha) that had not significant difference with usage of 350kg/ha nitrogen (36.74 t/ha). The most silage yield (38.21t/ha) obtained from Sc704 that was better than Sc770 (34.22 t/ha). The most plant dry weight (16.54) obtained from Sc704 that had not significant difference with Sc770 (15.92 t/ha).

Integrated weed management in chickpea (Cicer arietinum L.) under rainfed conditions of Karnataka, India

2016 ◽  
Author(s):  
Pandit S. Rathod ◽  
D. H. Patil ◽  
B. M. Doamani
Keyword(s):  
Seed Yield ◽  
Weed Management ◽  
Agricultural Research ◽  
Block Design ◽  
Dry Weight ◽  
Field Investigation ◽  
Integrated Weed Management ◽  
Research Station ◽  
Randomized Block Design ◽  
Rainfed Conditions

A field investigation was carried out during winter seasons of 2012-13, 2013-14 and 2014-15 at Agricultural Research Station, Gulbarga (Karnataka) to evaluate the effect of pre and post emergence herbicides on weeds and productivity of chickpea cv. JG-11. Ten treatments were tested in randomized block design with three replications. Among the herbicidal treatments, pendimethalin 38% CS 0.75 kg a.i ha-1PE + hand weeding (HW) at 30-35 days after sowing (DAS) and pendimethalin 30% EC 0.75 kg a.i ha-1+ imazethapyr 2% 1.0 kg a.i ha-1 PE + one hoeing at 30-35 DAS recorded significantly higher seed yield (1198 kg ha-1), net returns (Rs. 25107 ha-1) and B:C ratio (2.10) and lower weed dry weight (11.3 g m-2) and higher weed control efficiency (83%) than all other herbicidal treatments except two hand weedings at 20 and 40 DAS. It may be inferred from the present investigation that these herbicidal treatments could be used effectively as an alternative for controlling weeds and obtaining optimum seed yield of chickpea under rainfed conditions of Karnataka.

scholarly journals Studies of genetic variability, quantitative, and qualitative traits of Lilium cultivars (Lilium x hybrida) under shade net in North-West Himalayan region of India

2020 ◽  
Vol 26 (4) ◽  
pp. 670-677
Author(s):  
Ajay Kumar Singh ◽  
Rakesh Kumar ◽  
Hitesh Kumar
Keyword(s):  
Genetic Variability ◽  
Mean Value ◽  
Stem Length ◽  
Vase Life ◽  
Research Station ◽  
Flower Bud ◽  
Flower Stalk ◽  
North West ◽  
Significant Difference ◽  
Bud Initiation

Abstract An experiment was conducted to study genetic variability and performance of nine exotic lilium cultivars (Lilium x hybrida) for suitability for commercial cultivation in North Western hilly regions of Uttarakhand at Research Station and KVK, Lohaghat, GBPUA&T, Pantnagar, Champawat, Uttarakhand India. Bulbs of nine lilium hybrid cultivars viz., Acapulco (Pink), Sorbonne (White), Yelloween (Yellow), Tresor (Orange), Brindisi (Pink), Blackout (Red), Pavia (Yellow), Ercolano (White) and Samur (Pink) were selected as experimental material. There was significant difference in days taken for bud initiation among nine cultivars. It is evident from data that minimum days take for bud initiation in cultivar Blackout (44 days) followed by Tresor (45 days). The maximum number of flowers per plant reported in cultivars Acapulco (10.20) followed by Yelloween (8.20) and Sorbonne (7.80) which is at par with Blackout (7.40) and Pavia (7.20). Maximum vase life was recorded with Acapulco (12.4 days) followed by Sorbonne (11.80 days) which is at par with Yelloween (11.8 days) while Minimum vase life was recorded with Ercolano (8.40 days) and Tresor ( 8.40 days). Mean value was found maximum for flower stem length (87.29) and minimum mean value was exhibited by number of flowers per plant. Heritability value was found maximum for characters like days to flower bud opening followed by length of flower stalk and days taken to bud initiation.

scholarly journals Pertumbuhan Batang Pada Beberapa Varietas Kedelai (Glycine max (L.) Merr) Terhadap Jenis Tanah Aluvial, Regosol Dan Latosol

2020 ◽  
Vol 13 (01) ◽  
pp. 24-32
Author(s):  
Kurniawan M.R.D ◽  
P. S. Ajiningrum
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Stem Length ◽  
Test Results ◽  
Hypocotyl Length ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Different Types ◽  
Glycine Max L ◽  
Soybean Plants

This study aims to determine the growth of 10 superior soybean varieties planted in 3 different types of soil (alluvial, regosol and latosol) and to find out whether the 3 types of soil give an effect to the growth of 10 superior soybean varieties viewed from 4 parameters (hypocotyl length, length epicotiles, stem length and stem dry weight).This study used a Randomized Block Design (RBD) consisting of 10 varieties of soybean plants (anjasmoro, argomulyo, detam 1, detam 3 prida, detam 4 prida, detap 1, devon 1, devon 2, yellow gepak and deja 1) and 3 types of soil (alluvial, regosol, and latosol) was repeated 2 times. Data were analyzed using the two-way ANAVA 5% test and the 5% DMRT test. The results showed a significant difference in soybean growth. The best soybean varieties in hypocotyl length are Devon 2, in epicotile length are Anjasmoro, Devon 1 and Devon 2, the stem length and dry weight of the stem are Detap 1. The DMRT test results state that all three soil types (alluvial, regosol and latosol) have influence on the parameters of hypocotyl length and epicotyl length, whereas the parameters of stem length and plant dry weight have no effect.   Keywords: Soybean, Variety, Growing test  

scholarly journals EVALUATION OF YIELD, YIELD COMPONENTS AND SOME PHYSIOLOGICAL AND QUALITATIVE TRAITS OF CORN AFFECTED BY CHEMICAL AND BIOLOGICAL NITROGEN FERTILIZERS

2019 ◽  
Vol 18 (1) ◽  
pp. 3-12
Author(s):  
Sajad Kordi ◽  
Fardin Ghanbari
Keyword(s):  
Yield Components ◽  
Agricultural Research ◽  
Block Design ◽  
Chemical Fertilizer ◽  
Nitrogen Fertilizers ◽  
Fertilizer Treatment ◽  
Research Station ◽  
Area Index ◽  
Qualitative Traits ◽  
Significant Difference

In order to evaluate the yield, yield components and some physiological and qualitative traits of corn treated with nitrogen fertilizers (biological, chemical and integrated), a field experiment was conducted at the Agricultural Research Station of Khorramabad during 2016 growing season. Treatments were arranged in a complete randomized block design with four replications. Experimental treatments consisted of 100% chemical fertilizer (urea), bio-fertilizer (nitroxin), integration of bio-fertilizer + 25% chemical fertilizer, integration of bio-fertilizer + 50% chemical fertilizer, integration of bio-fertilizer + 75% chemical fertilizer and the control. Results showed that the effect of different treatments of fertilizers on all measured traits, except for number of rows in each ear and carotenoids, was significant. The results indicated that integration of bio-fertilizer + 75% chemical fertilizer affected the highest grain yield (9.31 t ha–1), dry biological yield (20.96 t ha–1), number of kernels in each row (41.67), plant height (201.02 cm), hectoliter weight (0.82 g cm–3), chlorophyll b (0.43 mg g–1 FW), total chlorophyll (1.1 mg g–1 FW) and leaf area index (LAI) (4) and there was no significant difference among this treatment and 100% chemical fertilizer (N) and integration of bio-fertilizer + 50% chemical fertilizer treatments in all measured traits. The greatest harvest index (45.8) and grain protein-content (9.1%) resulted from the integration of biofertilizer+ 50% chemical fertilizer treatment. Also the highest 1000-grains weight (281.13 g) and chlorophyll a (0.66 mg g–1 FW) were caused by 100% chemical fertilizer (urea) treatments. Results showed that integration of bio-fertilizer + chemical fertilizer could be considered as a means to reduce the consumption of chemical fertilizers for sustainable agriculture.

scholarly journals PENGARUH JARAK TANAM DAN DOSIS PUPUK KANDANG TERHADAP PERTUMBUHAN DAN HASIL TANAMAN BAWANG MERAH (Allium ascalonicum L.)

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Risqan Fitrah Manik ◽  
Nurhayati Nurhayati ◽  
Erida Nurahmi
Keyword(s):  
Plant Height ◽  
Agricultural Research ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Research Station ◽  
Plant Spacing ◽  
Wet Weight ◽  
Four Levels ◽  
Organic Horticulture

Effect of Plant Spacing and Dosage Manure on Growth and Yield of Shallots (Allium ascalonicum L.). This study aims to determine the effect of plant spacing and doses of manure is right for the growth and yield of onion maximum. This research was conducted at the Agricultural Research Station, substations Organic Horticulture Darussalam, Banda Aceh. This research has been conducted on the month in March 2016 to May 2016. This study used a randomized block design (RAK) factorial 2 x 4 with three replications, so that there are 8 combined treatments and 24 experimental units. Factors studied were plant spacing which consists of two levels ie (20 cm x 15 cm) and (20 cm x 25 cm) and the dose of manure which consists of four levels ie (without manure), (10 ton ha-1) , (20 ton ha-1) and (30 ton ha-1). The results showed that the spacing of significant effect on the wet weight berangkasan per plot and the dry weight of tuber per plot, plant height significantly affected the age of 30 HST and berangkasan dry weight per plot. Influential no significant effect on plant height at 15 and 45 days after planting, leaf number aged 15, 30 and 45 days after planting, the number of tillers per hill, tuber number per hill, wet weight berangkasan per clump, dry weight berangkasan per clump, dry weight of tuber per hill. Growth and the best results encountered at a spacing of 15 cm x 20 cm. Dose manure no real effect on all the observed variables. There was no significant interaction between treatment and dose spacing of manure, so there is no relationship between the two factors. Keywords : onion, plant spacing and doses of manure 

scholarly journals Study on Effect of Supplementary Irrigation on Rainfed Chickpea (Cicer arietinum L.)

2015 ◽  
Vol 3 (3) ◽  
pp. 431-433
Author(s):  
Nav Raj Acharya ◽  
Jiban Shrestha ◽  
Subarna Sharma ◽  
Gun Bahadur Lama
Keyword(s):  
Grain Yield ◽  
Agricultural Research ◽  
Proper Time ◽  
Block Design ◽  
Winter Season ◽  
Research Station ◽  
Residual Soil ◽  
Supplementary Irrigation ◽  
Significant Difference ◽  
Irrigation Time

Chickpea is one of the important winter legumes in Nepal. It is grown after rice or maize either as sole or mixed crop. In Nepal, chickpea is mostly grown as rainfed crop on residual soil moisture or sometimes under irrigation. Lack of irrigation results drought and heat stress which affects crop growth and development. Irrigation at proper time is one of the most important factors for achieving higher crop yield.  The experiment regarding use of supplementary irrigation time on chickpea was carried out at Regional Agricultural Research Station, Khajura, Banke, Nepal during the winter season of the year 2011 and 2012. The experiment was laid out in Randomized Complete Block Design with three replications. Seven different time intervals of irrigation was applied in the experiment for both years. Treatments differed significantly in terms of grain yield but showed non -significant difference in days to flowering and maturity over the years. The combined analysis of the experiments showed that the highest grain yield (2318 kg/ha) was produced when irrigation was supplied at vegetative stage followed by irrigation supplied at flowering stage (2298 kg/ha) and pod fill stage (2104 kg/ha) respectively.Int J Appl Sci Biotechnol, Vol 3(3): 431-433

scholarly journals Yield Performance of Heat Tolerant & Early Maturing Wheat Varieties in Chattogram Region

2021 ◽  
pp. 82-96
Keyword(s):  
Agricultural Research ◽  
Block Design ◽  
Cost Ratio ◽  
Research Station ◽  
Wheat Varieties ◽  
Benefit Cost Ratio ◽  
Significant Difference ◽  
Early Maturing ◽  
Heat Tolerant ◽  
Benefit Cost

The experiment was conducted in two consecutive crop seasons (2015-16 and 2016-17) at Regional Agricultural Research Station (RARS), Hathazari, Chattogram during Rabi season (November to March) with 3 duplicate laid out Randomized Complete Block Design (RCBD) to compare the rehearsal of high-placed outcome, early maturing and heat tolerant varieties under increasing temperature. BARI released early maturing wheat varieties were used for optimum sowing time and heat tolerance as an adaptive mechanism suffering from terminal heat stress. Six heat-tolerant early maturing wheat varieties were (BARI Gom 25, BARI Gom 26, BARI Gom 27, BARI Gom 28, BARI Gom 29, and BARI Gom 30). The highest crop output was gained from BARI Gom 30 (4.33 t/ha) followed by BARI Gom 26 (4.06 t/ha) in a couple of years. The lowest yield was found from BARI Gom 27 (2.66t/ha) followed by BARI Gom 29 (3.53 t/ha), BARI Gom 28 (3.36 t/ha), and BARI Gom 25 (3.13 t/ha) both years. Crop output of wheat and amount of spike showed significant difference and rest of the parameters were insignificant. The earliest maturing variety was BARI Gom 30 and produced a maximum crop yield than others. BARI Gom 30 showed a maximum benefit-cost ratio (BCR) of 1.73 and BARI Gom 27exhibited the lowest benefit-cost ratio (BCR) of 1.06. This result of the experiment showed that early high yielding variety and the best adaptive variety was BARI Gom 30 among the six varieties in Chattogram.

Sign in / Sign up

Export Citation Format

Share Document