scholarly journals Flexible freestanding MoS2 based paper-like material for energy conversion and storage

2019 ◽  
Author(s):  
Florian Zoller ◽  
Jan Luxa ◽  
Thomas Bein ◽  
Dina Fattakhova-Rohlfing ◽  
Daniel Bousa ◽  
...  
Keyword(s):  
Composite Material ◽  
Energy Storage ◽  
Mechanical Strength ◽  
Current Density ◽  
Active Sites ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
Onset Potential ◽  
High Flexibility

Construction of flexible electrochemical devices for energy storage and generation is of utmost importance in the modern society. In this article, we report the synthesis of flexible MoS2 based composite paper by high-energy shear force milling and simple vacuum filtration. This composite material combines high flexibility, mechanical strength and good chemical stability. Chronopotentiometric charge-discharge measurements were used to determine the capacitance of our paper material. Highest capacitance of 33 mF cm-2 was achieved at current density of 1 mA cm-2 showing potential application in supercapacitors. We further used the material as a cathode for hydrogen evolution reaction (HER) with an onset potential of ca. -0.2 V vs RHE. The onset potential was even lower (ca. -0.1 V vs RHE) after treatment with n-butyllithium suggesting the introduction of new active sites. Finally, a potential use in Lithium ion batteries (LIB) was examined. Our material can be used directly without any binder, additive carbon or copper current collector and delivers specific capacity of 740 mA h g-1 at a current density of 0.1 A g-1. After 40 cycles at this current density the material still reached a capacity retention of 91%. Our findings show that this composite material could find application in electrochemical energy storage and generation devices where high flexibility and mechanical strength are desired.

scholarly journals Flexible freestanding MoS2-based composite paper for energy conversion and storage

2019 ◽  
Vol 10 ◽  
pp. 1488-1496 ◽  
Author(s):  
Florian Zoller ◽  
Jan Luxa ◽  
Thomas Bein ◽  
Dina Fattakhova-Rohlfing ◽  
Daniel Bouša ◽  
...  
Keyword(s):  
Composite Material ◽  
Energy Storage ◽  
Mechanical Strength ◽  
Current Density ◽  
Active Sites ◽  
High Energy ◽  
Onset Potential ◽  
High Flexibility ◽  
A Current ◽  
Composite Paper

The construction of flexible electrochemical devices for energy storage and generation is of utmost importance in modern society. In this article, we report on the synthesis of flexible MoS2-based composite paper by high-energy shear force milling and simple vacuum filtration. This composite material combines high flexibility, mechanical strength and good chemical stability. Chronopotentiometric charge–discharge measurements were used to determine the capacitance of our paper material. The highest capacitance achieved was 33 mF·cm−2 at a current density of 1 mA·cm−2, demonstrating potential application in supercapacitors. We further used the material as a cathode for the hydrogen evolution reaction (HER) with an onset potential of approximately −0.2 V vs RHE. The onset potential was even lower (approximately −0.1 V vs RHE) after treatment with n-butyllithium, suggesting the introduction of new active sites. Finally, a potential use in lithium ion batteries (LIB) was examined. Our material can be used directly without any binder, additive carbon or copper current collector and delivers specific capacity of 740 mA·h·g−1 at a current density of 0.1 A·g−1. After 40 cycles at this current density the material still reached a capacity retention of 91%. Our findings show that this composite material could find application in electrochemical energy storage and generation devices where high flexibility and mechanical strength are desired.

scholarly journals 3D hierarchical porous graphene aerogel with tunable meso-pores on graphene nanosheets for high-performance energy storage

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Long Ren ◽  
K. N. Hui ◽  
K. S. Hui ◽  
Yundan Liu ◽  
Xiang Qi ◽  
...  
Keyword(s):  
Energy Storage ◽  
Current Density ◽  
Active Sites ◽  
High Performance ◽  
Hydrothermal Reaction ◽  
Graphene Nanosheets ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Porous Graphene ◽  
Hierarchical Porous

Abstract New and novel 3D hierarchical porous graphene aerogels (HPGA) with uniform and tunable meso-pores (e.g., 21 and 53 nm) on graphene nanosheets (GNS) were prepared by a hydrothermal self-assembly process and an in-situ carbothermal reaction. The size and distribution of the meso-pores on the individual GNS were uniform and could be tuned by controlling the sizes of the Co3O4 NPs used in the hydrothermal reaction. This unique architecture of HPGA prevents the stacking of GNS and promises more electrochemically active sites that enhance the electrochemical storage level significantly. HPGA, as a lithium-ion battery anode, exhibited superior electrochemical performance, including a high reversible specific capacity of 1100 mAh/g at a current density of 0.1 A/g, outstanding cycling stability and excellent rate performance. Even at a large current density of 20 A/g, the reversible capacity was retained at 300 mAh/g, which is larger than that of most porous carbon-based anodes reported, suggesting it to be a promising candidate for energy storage. The proposed 3D HPGA is expected to provide an important platform that can promote the development of 3D topological porous systems in a range of energy storage and generation fields.

scholarly journals Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3586
Author(s):  
Qi An ◽  
Xingru Zhao ◽  
Shuangfu Suo ◽  
Yuzhu Bai
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Power Density ◽  
High Power ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
Cycle Life ◽  
High Energy Density ◽  
Lithium Ion Capacitor

Lithium-ion capacitors (LICs) have been widely explored for energy storage. Nevertheless, achieving good energy density, satisfactory power density, and stable cycle life is still challenging. For this study, we fabricated a novel LIC with a NiO-rGO composite as a negative material and commercial activated carbon (AC) as a positive material for energy storage. The NiO-rGO//AC system utilizes NiO nanoparticles uniformly distributed in rGO to achieve a high specific capacity (with a current density of 0.5 A g−1 and a charge capacity of 945.8 mA h g−1) and uses AC to provide a large specific surface area and adjustable pore structure, thereby achieving excellent electrochemical performance. In detail, the NiO-rGO//AC system (with a mass ratio of 1:3) can achieve a high energy density (98.15 W h kg−1), a high power density (10.94 kW kg−1), and a long cycle life (with 72.1% capacity retention after 10,000 cycles). This study outlines a new option for the manufacture of LIC devices that feature both high energy and high power densities.

scholarly journals Efficient Catalytic Conversion of Polysulfides by Biomimetic Design of “Branch-Leaf” Electrode for High-Energy Sodium–Sulfur Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Wenyan Du ◽  
Kangqi Shen ◽  
Yuruo Qi ◽  
Wei Gao ◽  
Mengli Tao ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Electrochemical Reaction ◽  
Molecular Layer ◽  
Specific Capacity ◽  
High Energy ◽  
Reduction Reaction ◽  
Biomimetic Design ◽  
Co Nanoparticles ◽  
Sodium Sulfur

AbstractRechargeable room temperature sodium–sulfur (RT Na–S) batteries are seriously limited by low sulfur utilization and sluggish electrochemical reaction activity of polysulfide intermediates. Herein, a 3D “branch-leaf” biomimetic design proposed for high performance Na–S batteries, where the leaves constructed from Co nanoparticles on carbon nanofibers (CNF) are fully to expose the active sites of Co. The CNF network acts as conductive “branches” to ensure adequate electron and electrolyte supply for the Co leaves. As an effective electrocatalytic battery system, the 3D “branch-leaf” conductive network with abundant active sites and voids can effectively trap polysulfides and provide plentiful electron/ions pathways for electrochemical reaction. DFT calculation reveals that the Co nanoparticles can induce the formation of a unique Co–S–Na molecular layer on the Co surface, which can enable a fast reduction reaction of the polysulfides. Therefore, the prepared “branch-leaf” CNF-L@Co/S electrode exhibits a high initial specific capacity of 1201 mAh g−1 at 0.1 C and superior rate performance.

scholarly journals Superior FexN electrocatalyst derived from 1,1′-diacetylferrocene for oxygen reduction reaction in alkaline and acidic media

2020 ◽  
Vol 9 (1) ◽  
pp. 843-852
Author(s):  
Hunan Jiang ◽  
Jinyang Li ◽  
Mengni Liang ◽  
Hanpeng Deng ◽  
Zuowan Zhou
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Current Density ◽  
Active Sites ◽  
Reduction Reaction ◽  
Alkaline Media ◽  
Acidic Media ◽  
Onset Potential ◽  
Acidic And Alkaline Media ◽  
The Stability

AbstractAlthough Fe–N/C catalysts have received increasing attention in recent years for oxygen reduction reaction (ORR), it is still challenging to precisely control the active sites during the preparation. Herein, we report FexN@RGO catalysts with the size of 2–6 nm derived from the pyrolysis of graphene oxide and 1,1′-diacetylferrocene as C and Fe precursors under the NH3/Ar atmosphere as N source. The 1,1′-diacetylferrocene transforms to Fe3O4 at 600°C and transforms to Fe3N and Fe2N at 700°C and 800°C, respectively. The as-prepared FexN@RGO catalysts exhibited superior electrocatalytic activities in acidic and alkaline media compared with the commercial 10% Pt/C, in terms of electrochemical surface area, onset potential, half-wave potential, number of electrons transferred, kinetic current density, and exchange current density. In addition, the stability of FGN-8 also outperformed commercial 10% Pt/C after 10000 cycles, which demonstrates the as-prepared FexN@RGO as durable and active ORR catalysts in acidic media.

scholarly journals Liquid Phase Synthesis of CoP Nanoparticles with High Electrical Conductivity for Advanced Energy Storage

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Guo-Qun Zhang ◽  
Bo Li ◽  
Mao-Cheng Liu ◽  
Shang-Ke Yuan ◽  
Leng-Yuan Niu
Keyword(s):  
Electrical Conductivity ◽  
Energy Storage ◽  
Liquid Phase ◽  
Specific Capacitance ◽  
Current Density ◽  
High Surface ◽  
High Surface Area ◽  
High Energy ◽  
High Energy Density ◽  
Energy Storage Materials

Transition metal phosphide alloys possess the metalloid characteristics and superior electrical conductivity and are a kind of high electrical conductive pseudocapacitive materials. Herein, high electrical conductive cobalt phosphide alloys are fabricated through a liquid phase process and a nanoparticles structure with high surface area is obtained. The highest specific capacitance of 286 F g−1 is reached at a current density of 0.5 A g−1. 63.4% of the specific capacitance is retained when the current density increased 16 times and 98.5% of the specific capacitance is maintained after 5000 cycles. The AC//CoP asymmetric supercapacitor also shows a high energy density (21.3 Wh kg−1) and excellent stability (97.8% of the specific capacitance is retained after 5000 cycles). The study provides a new strategy for the construction of high-performance energy storage materials by enhancing their intrinsic electrical conductivity.

Nano-dendrite structured cobalt phosphide based hybrid supercapacitor with high energy storage and cycling stability

2021 ◽  
Author(s):  
Xiaoyu Chen ◽  
Pu Chang ◽  
Shuo Zhang ◽  
Lixiu Guan ◽  
Guohe Ren ◽  
...  
Keyword(s):  
Energy Storage ◽  
Specific Capacity ◽  
High Energy ◽  
Cycling Stability ◽  
Activation Process ◽  
Carbon Cloth ◽  
Cobalt Phosphide ◽  
Improved Performance ◽  
Transition Metal Phosphides ◽  
High Energy Storage

Abstract The supercapacitors possessing high energy storage and long serving period have strategic significance to solve the energy crisis issues. Herein, fluffy nano-dendrite structured cobalt phosphide (CoP) is grown on carbon cloth through simple hydrothermal and electrodeposition treatments (CoP/C-HE). Benefit from its excellent electrical conductivity and special structure, CoP/C-HE manifests a high specific capacity of 461.4 C g-1 at 1 A g-1. Meanwhile, the capacity retention remains 92.8% over 10000 cycles at 5 A g-1, proving the superior cycling stability. The phase conversion of Co2P during the activation process also contributes to the improved performance. The assembled two-electrode asymmetric supercapacitor demonstrates excellent performance in terms of energy density (42.4 W h kg-1 at a power density of 800.0 W kg-1) and cycling stability (86.3% retention over 5000 cycles at 5 A g-1), which is superior to many reported cobalt-based supercapacitors. Our work promotes the potential of transition metal phosphides for the applications in supercapacitors.

Recent Advances on the Application of Graphene Quantum Dots in Energy Storage

2021 ◽  
Vol 15 ◽  
Author(s):  
Feng Shi ◽  
Quanrun Liu
Keyword(s):  
Quantum Dots ◽  
Energy Storage ◽  
Potential Application ◽  
Active Sites ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Graphene Quantum Dots ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
New Energy

Background: As an emerging carbon nanomaterial, graphene quantum dots (GQDs) have shown great potential application in new energy storage devices due to their unique small size effect and abundant edge active sites. This work introduces the main synthesis strategies of GQDs, which includes top-down and bottom-up methods; the application examples of GQDs and GQDs-based composites in energy storage are reviewed, and more, the unique advantages of GQDs are used in supercapacitors, Lithium-ion batteries (LIBs) and Lithium-sulfur batteries (Li–S batteries) are highlighted. The problems and development prospects in this growing area are also discussed. Method: We conducted a detailed search of “the application of GQDs in energy storage devices” in the published papers and the public patents based on Web of Science database in the period from 2014 to 2020. The corresponding literature was carefully evaluated and analyzed. Results: Sixty papers and twenty-eight recent patents were included in this mini-review. The significant advances in the recent years are summarized with comparative and balanced discussion. Thanks to the unique properties of large specific surface area, high conductivity and abundant active sites, GQDs have unparalleled potential application for new energy storage, especially improving the specific capacity and cycle stability of supercapacitors, LIBs and Li-S batteries. Conclusion: The findings of this mini-review confirm the importance of GQDs, show the enhanced electrochemical performance in supercapacitors, LIBs and Li-S batteries, and also provide a helpful guide to design and fabricate highefficiency electrode materials.

Sign in / Sign up

Export Citation Format

Share Document