scholarly journals Application of synthesized copper nanoparticles using aqueous extract of Ziziphus mauritiana L. leaves as a colorimetric sensor for the detection of Ag+

2020 ◽  
Vol 44 (5) ◽  
pp. 1376-1385 ◽  
Author(s):  
Roomia MEMON ◽  
Ayaz Ali MEMON ◽  
Syed Tufail Hussain SHERAZI ◽  
Sirajuddin Sirajuddin ◽  
Aamna BALOUCH ◽  
...  
Keyword(s):  
Copper Nanoparticles ◽  
Limit Of Detection ◽  
Copper Chloride ◽  
Colorimetric Sensor ◽  
Ziziphus Mauritiana ◽  
Limit Of Quantification ◽  
Force Microscopy ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Average Size

The presented work demonstrates the preparation of copper nanoparticles (CuNPs) via aqueous leaves extract of Ziziphus mauritiana L. (Zm) using hydrazine as a reducing agent. Various parameters such as volume of extract, concentration of hydrazine hydrate, concentration of copper chloride, and pH of the solution were optimized to obtain Ziziphus mauritiana L. leaves extract derived copper nanoparticles (Zm-CuNPs). Brownish red color was initial indication of the formation of Zm-CuNPs while it was confirmed by surface plasmon resonance (SPR) band at wavelength of 584 nm using ultraviolet-visible (UV-vis) spectroscopy. Synthesized Zm-CuNPs were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffractometry (XRD). AFM images showed that the particle size of Zm-CuNPs was from 7 to 17 nm with an average size of 11.3 nm. Fabricated sensor (Zm-CuNPs) were used as a colorimetric sensor for the detection of Ag+ at a linear range between 0.67 × 10–6 – 9.3 × 10–6 with R2 value of 0.992. For real water samples, limit of quantification (LOQ) and limit of detection (LOD) for Ag+ was found to be 330 × 10–9 and 100 × 10–9, respectively.

scholarly journals Ranolazine-Functionalized Copper Nanoparticles as a Colorimetric Sensor for Trace Level Detection of As3+

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 83 ◽  
Author(s):  
Gul Laghari ◽  
Ayman Nafady ◽  
Sameerah Al-Saeedi ◽  
Sirajuddin ◽  
Syed Sherazi ◽  
...  
Keyword(s):  
Copper Nanoparticles ◽  
Color Change ◽  
Cost Effective ◽  
Colorimetric Sensor ◽  
Spherical Particles ◽  
Localized Surface Plasmon ◽  
Force Microscopy ◽  
Highly Sensitive ◽  
Dark Green ◽  
Average Size

This study involves environmentally friendly synthesis of copper nanoparticles in aqueous medium without inert gas protection, using ranolazine as a capping material. UV-Visible (UV-Vis) spectrometry showed that ranolazine-derived copper nanoparticles (Rano-Cu NPs) demonstrate a localized surface plasmon resonance (LSPR) band at 573 nm with brick-red color under optimized parameters, including pH, reaction time, and concentrations of copper salt, hydrazine hydrate, and ranolazine. The coating of ranolazine on the surface of Cu NPs was studied via Fourier transform infrared (FTIR) spectroscopy. Scanning electron microscopy (SEM) revealed that Rano-Cu NPs consist of spherical particles. X-ray diffraction (XRD) verified that Rano-Cu NPs are crystalline in nature. Atomic force microscopy (AFM) showed that the average size of Rano-Cu NPs was 40 ± 2 nm in the range of 22–95 nm. Rano-Cu NPs proved to be highly sensitive as a selective colorimetric sensor for As3+ via color change from brick red to dark green, in the linear range of 3.0 × 10−7 to 8.3 × 10−6 M, with an R² value of 0.9979. The developed sensor is simple, cost effective, highly sensitive, and extremely selective for As3+ detection, showing a low detection limit (LDL) of 1.6 × 10−8 M. The developed sensor was effectively tested for detection of As3+ in some water samples.

scholarly journals Green Synthesis of Silver Nanoparticles Using Hibiscus sabdariffa Leaves Extract

2021 ◽  
Vol 3 (1) ◽  
pp. 76-81
Author(s):  
Siti Husnaa Mohd Taib ◽  
Kamyar Shameli ◽  
Roshafima Rasit Ali ◽  
Zahra Izadiyan ◽  
Zatil Izzah Ahmad Tarmizi
Keyword(s):  
Silver Nanoparticles ◽  
Hibiscus Sabdariffa ◽  
Ag Nps ◽  
Tem Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Size Of Particles ◽  
Average Size

The present paper reports the synthesis of silver nanoparticles (Ag-NPs) by a green method using Hibiscus sabdariffa (H. sabdariffa) leaves extract as reductant and stabilizer. The synthesized Ag-NPs were characterized by ultraviolet-visible (UV-vis) spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). UV-vis spectrum of synthesized Ag-NPs showed a peak at 378 nm. TEM analysis revealed that the particles were spherical and irregular in shape and has average size around 56.52 nm. This structure and size of particles were confirmed by AFM analysis. The UV-vis and FTIR spectrum provides evidence of the presence of caffeic acid component as a representative biomolecule in stabilising the nanoparticles based on previous studies. Hence, this study advocates that H. sabdariffa have potential for synthesizing nanoparticles.

Nanocrystalline Solutions as Precursors to The Spray Deposition of Cdte Thin Films

1995 ◽  
Vol 382 ◽  
Author(s):  
Martin Pehnt ◽  
Douglas L. Schulz ◽  
Calvin J. Curtis ◽  
Helio R. Moutinho ◽  
Amy Swartzlander ◽  
...  
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Grain Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Cdte Nanoparticles ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Cdte Thin Films

ABSTRACTIn this article we report the first nanoparticle-derived route to smooth, dense, phase-pure CdTe thin films. Capped CdTe nanoparticles were prepared by injection of a mixture of Cd(CH3)2, (n-C8H17)3 PTe and (n-C8H17)3P into (n-C8H17)3PO at elevated temperatures. The resultant nanoparticles 32-45 Å in diameter were characterized by x-ray diffraction, UV-Vis spectroscopy, transmission electron microscopy, thermogravimetric analysis and energy dispersive x-ray spectroscopy. CdTe thin film deposition was accomplished by dissolving CdTe nanoparticles in butanol and then spraying the solution onto SnO2-coated glass substrates at variable susceptor temperatures. Smooth and dense CdTe thin films were obtained using growth temperatures approximately 200 °C less than conventional spray pyrolysis approaches. CdTe films were characterized by x-ray diffraction, UV-Vis spectroscopy, atomic force microscopy, and Auger electron spectroscopy. An increase in crystallinity and average grain size as determined by x-ray diffraction was noted as growth temperature was increased from 240 to 300 °C. This temperature dependence of film grain size was further confirmed by atomic force microscopy with no remnant nanocrystalline morphological features detected. UV-Vis characterization of the CdTe thin films revealed a gradual decrease of the band gap (i.e., elimination of nanocrystalline CdTe phase) as the growth temperature was increased with bulk CdTe optical properties observed for films grown at 300 °C.

scholarly journals Surface Plasmon Resonance Based on Molecularly Imprinted Polymeric Film for l-Phenylalanine Detection

Biosensors ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 21
Author(s):  
Duygu Çimen ◽  
Nilay Bereli ◽  
Adil Denizli
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Limit Of Detection ◽  
Kinetic Studies ◽  
Force Microscopy ◽  
Spr Sensor ◽  
Atomic Force ◽  
Analysis Technique ◽  
Molecular Imprinting Technology

In this study, we designed a simple, rapid, sensitive and selective surface plasmon resonance (SPR) sensor for detection of L-phenylalaine by utilizing molecular imprinting technology. l-phenylalanine imprinted and non-imprinted poly(2-hydroxyethyl methacrylate-methacryloyl-l-phenylalanine) polymeric films were synthesized onto SPR chip surfaces using ultraviolet polymerization. l-phenyalanine imprinted and non-imprinted SPR sensors were characterized by using contact angle, atomic force microscopy and ellipsometry. After characterization studies, kinetic studies were carried out in the concentration range of 5.0–400.0 μM. The limit of detection and quantification were obtained as 0.0085 and 0.0285 μM, respectively. The response time for the test including equilibration, adsorption and desorption was approximately 9 min. The selectivity studies of the l-phenylalanine imprinted SPR sensor was performed in the presence of d-phenylalanine and l-tryptophan. Validation studies were carried out via enzyme-linked immunosorbent analysis technique in order to demonstrate the applicability and superiority of the l-phenylalanine imprinted SPR sensor.

scholarly journals Study the Effect of Water Content on the Structure of Electrochemically Prepared TiO2 Nanotubes

2022 ◽  
Author(s):  
Sara Al-Waisawy ◽  
Ahmed Kareem Abdullah ◽  
Hadi A. Hamed ◽  
Ali A. Al-bakri
Keyword(s):  
Water Content ◽  
Pure Titanium ◽  
Electrochemical Anodization ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Titania Nanotube Arrays ◽  
Anodization Process ◽  
Titania Films ◽  
Average Size

In this research, the pure titanium foil was treated in glycerol base electrolyte with 0.7 wt.% NH4F and a small amount of H2O at 17 V for 2 hours by electrochemical anodization process in order to prepare Titania nanotube arrays at room temperature (~25 ºC), different water content was added to the electrolyte as a tube enhancing agent. The high density uniform arrays are prepared by using organized and well aligned these tubes. The average size of tube diameter, ranging from 57 to 92 nm which found it increases with increasing water content, and the length of the tube ranging from 2.76 to 4.12 µm, also found to increase with increasing water content and ranging in size of wall thickness from 23 to 35 nm. A possible growth mechanism is presented. The X-ray diffraction (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to study the structure and morphology of the Titania films.

scholarly journals Optical, Structural and Electrical Properties of Electrochemical Synthesis of Thin Film of Polyaniline

2018 ◽  
Vol 15 (1) ◽  
pp. 73-80 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Morphological Studies ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Structural And Electrical Properties ◽  
A Cell ◽  
Ft Ir ◽  
Ir And Raman

Polyaniline membranes of aniline were produced using an electrochemical method in a cell consisting of two poles. The effect of the vaccination was observed on the color of membranes of polyaniline, where analysis as of blue to olive green paints. The sanction of PANI was done by FT-IR and Raman techniques. The crystallinity of the models was studied by X-ray diffraction technique. The different electronic transitions of the PANI were determined by UV-VIS spectroscopy. The electrical conductivity of the manufactured samples was measured by using the four-probe technique at room temperature. Morphological studies have been determined by Atomic force microscopy (AFM). The structural studies have been measured by (SEM).

scholarly journals Detection Limits of DLS and UV-Vis Spectroscopy in Characterization of Polydisperse Nanoparticles Colloids

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Emilia Tomaszewska ◽  
Katarzyna Soliwoda ◽  
Kinga Kadziola ◽  
Beata Tkacz-Szczesna ◽  
Grzegorz Celichowski ◽  
...  
Keyword(s):  
Light Scattering ◽  
Dynamic Light Scattering ◽  
Point Of View ◽  
Spectroscopy Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
The One

Dynamic light scattering is a method that depends on the interaction of light with particles. This method can be used for measurements of narrow particle size distributions especially in the range of 2–500 nm. Sample polydispersity can distort the results, and we could not see the real populations of particles because big particles presented in the sample can screen smaller ones. Although the theory and mathematical basics of DLS technique are already well known, little has been done to determine its limits experimentally. The size and size distribution of artificially prepared polydisperse silver nanoparticles (NPs) colloids were studied using dynamic light scattering (DLS) and ultraviolet-visible (UV-Vis) spectroscopy. Polydisperse colloids were prepared based on the mixture of chemically synthesized monodisperse colloids well characterized by atomic force microscopy (AFM), transmission electron microscopy (TEM), DLS, and UV-Vis spectroscopy. Analysis of the DLS results obtained for polydisperse colloids reveals that several percent of the volume content of bigger NPs could screen completely the presence of smaller ones. The presented results could be extremely important from nanoparticles metrology point of view and should help to understand experimental data especially for the one who works with DLS and/or UV-Vis only.

Study of Silver and Copper Nanoparticles by Electron and Atomic Force Microscopy

2019 ◽  
Vol 58 (5-6) ◽  
pp. 257-264
Author(s):  
L. D. Kisterska ◽  
O. B. Loginova ◽  
S. O. Lysovenko ◽  
V. M. Tkach
Keyword(s):  
Atomic Force Microscopy ◽  
Copper Nanoparticles ◽  
Force Microscopy ◽  
Atomic Force

scholarly journals Controlled and cellulose eco-friendly synthesis and characterization of Bi2O2CO3 quantum dot nanostructures (QDNSs) and drug delivery study

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Hojat Samarehfekri ◽  
Hamid Reza Rahimi ◽  
Mehdi Ranjbar
Keyword(s):  
Quantum Dot ◽  
Optical Band Gap ◽  
Biological Therapy ◽  
Skin Extract ◽  
Force Microscopy ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Different Temperatures ◽  
Green Capping Agent

AbstractThis work aimed to prepare solvent-free or green Bi2O2CO3 for quantum dot nanostructures (QDNSs) based on cellulose as a stabilizer and green capping agent to sorafenib delivery for liver targeting. Because the walnut tree is one of the most abundant trees in Iran, it was tried to synthesize Bi2O2CO3 QDNSs using a walnut skin extract. The saturation magnetization for Bi2O2CO3 QDNSs was calculated to be 68.1. Also, the size of products was measured at around 60–80 nm with the Debye–Scherrer equation. Moreover, the morphology, functional groups, and crystallography of the Bi2O2CO3 nanoparticles were investigated using atomic force microscopy, scanning electron microscopy, vibrating-sample magnetometer, and Uv–vis spectroscopy. The results demonstrated that Bi2O2CO3 QDNSs have opto-magnetic properties and they can be suggested as the candidate materials for the sorafenib delivery on the liver tissue. The optical band gap estimated for Bi2O2CO3 QDNSs was found to be red-shift from 3.22 eV. This study suggests the preparation of the Bi2O2CO3 QDNSs based on cellulose as new opto-magnetic materials at different temperatures of 180 °C, 200 °C, 220 °C, and 240 °C for sorafenib delivery as a type of biological therapy drug.

scholarly journals C60 Fullerene as an Effective Nanoplatform of Alkaloid Berberine Delivery into Leukemic Cells

Pharmaceutics ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 586 ◽  
Author(s):  
Anna Grebinyk ◽  
Svitlana Prylutska ◽  
Anatoliy Buchelnikov ◽  
Nina Tverdokhleb ◽  
Sergii Grebinyk ◽  
...  
Keyword(s):  
Native American ◽  
Water Solubility ◽  
Middle Eastern ◽  
Leukemic Cells ◽  
C60 Fullerene ◽  
Force Microscopy ◽  
Molar Ratios ◽  
Atomic Force ◽  
Vis Spectroscopy

A herbal alkaloid Berberine (Ber), used for centuries in Ayurvedic, Chinese, Middle-Eastern, and native American folk medicines, is nowadays proved to function as a safe anticancer agent. Yet, its poor water solubility, stability, and bioavailability hinder clinical application. In this study, we have explored a nanosized carbon nanoparticle—C60 fullerene (C60)—for optimized Ber delivery into leukemic cells. Water dispersions of noncovalent C60-Ber nanocomplexes in the 1:2, 1:1, and 2:1 molar ratios were prepared. UV–Vis spectroscopy, dynamic light scattering (DLS), and atomic force microscopy (AFM) evidenced a complexation of the Ber cation with the negatively charged C60 molecule. The computer simulation showed that π-stacking dominates in Ber and C60 binding in an aqueous solution. Complexation with C60 was found to promote Ber intracellular uptake. By increasing C60 concentration, the C60-Ber nanocomplexes exhibited higher antiproliferative potential towards CCRF-CEM cells, in accordance with the following order: free Ber < 1:2 < 1:1 < 2:1 (the most toxic). The activation of caspase 3/7 and accumulation in the sub-G1 phase of CCRF-CEM cells treated with C60-Ber nanocomplexes evidenced apoptosis induction. Thus, this study indicates that the fast and easy noncovalent complexation of alkaloid Ber with C60 improved its in vitro efficiency against cancer cells.

Sign in / Sign up

Export Citation Format

Share Document