Is Entropy Suitable to Characterize Data and Signals for Cognitive Informatics?

2011 ◽  
pp. 28-51
Author(s):  
Withold Kinsner
Keyword(s):  
Kolmogorov Complexity ◽  
Scale Invariant ◽  
Cognitive Informatics ◽  
Generalized Entropy ◽  
Entropy Measures ◽  
Cognition And Learning ◽  
Materials Used ◽  
Transformation Processes

This chapter provides a review of Shannon and other entropy measures in evaluating the quality of materials used in perception, cognition, and learning processes. Energy-based metrics are not suitable for cognition, as energy itself does not carry information. Instead, morphological (structural and contextual) metrics as well as entropybased multiscale metrics should be considered in cognitive informatics. Appropriate data and signal transformation processes are defined and discussed in the perceptual framework, followed by various classes of information and entropies suitable for characterization of data, signals, and distortion. Other entropies are also described, including the Rényi generalized entropy spectrum, Kolmogorov complexity measure, Kolmogorov-Sinai entropy, and Prigogine entropy for evolutionary dynamical systems. Although such entropy-based measures are suitable for many signals, they are not sufficient for scale-invariant (fractal and multifractal) signals without corresponding complementary multiscale measures.

Using Cow Bone Char for Improvement of Domestic Water Quality in Chiang Mai, Thailand

2011 ◽  
Vol 311-313 ◽  
pp. 1583-1587
Author(s):  
Surasit Laosatirawong ◽  
Sakdiphon Thiensem ◽  
Sittiporn Punyanitya
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Bone Char ◽  
Chiang Mai ◽  
Domestic Water ◽  
Batch System ◽  
Materials Used ◽  
Cow Bone

Characterization of Environmentally friendly materials used as wastewater treatment material has been studied in order to compare the quality of wastewater in Chiang Mai, Thailand on two types of treatment materials, which are cow bone char (CBC) made from Thai cow bone char cleaned and calcined at 850๐C and the a mineral called “zeolite” (ZLT) bought from Kamthiang market, Chiang Mai. The physical characteristics of both types of materials indicate that the CBC has a higher density than the ZLT but has lower pore volume than the ZLT. The effect of density on the water quality improvement was showed that CBC was a suitable type of wastewater treatment material because their high density can fix them in the batch system.

scholarly journals Physical-ceramic characterization of clays used in the manufacture of mansory products for construction

Respuestas ◽  
2018 ◽  
Vol 23 (2) ◽  
pp. 12-21
Author(s):  
Ricardo Andrés García León ◽  
Eder Norberto Flórez Solano ◽  
Carlos Humberto Acevedo Peñaloza
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Current Standard ◽  
The North ◽  
North Eastern ◽  
Materials Used ◽  
A Company ◽  
Standard Techniques

Nowadays, in Colombia, specifically in the north-eastern, in Santander region, the process of mixing the ceramic paste used to manufacture masonry products for construction (H- 10 bricks, tiles, roof tiles, etc.) is done manually. For this reason, approximately 70% of the companies do not possess the technological tools which facilitate the prediction of the behavior of the raw material (clay). The main objective of this research is to formulate mixtures at a laboratory-level in order to verify the physical properties of ceramic raw materials used by a company which was takenas a sample. The research development was carried out through the execution of tests and laboratory analysis, taking into account the formulation of mixtures with the help of Statgraphics Centurion XV software in order to obtain combinations of raw materials according to the requirements of the current standard techniques. The results demonstrate the importance of using statistical programs for the improvement of systems and processes, predicting the behavior of raw materials as well as conducting pilot tests, taking into account the laboratory analyses in the ceramic industry. Conclusions: The results show that the mixture combinations obtained have the necessary parameters to meet the current standards such as resistance and absorption, which will optimize the economic and physical resources of the company, as well as the quality of the final product.

Characterization of Polymorphic Forms of Rifaximin

2016 ◽  
Vol 99 (4) ◽  
pp. 964-971 ◽  
Author(s):  
Ana Carolina Kogawa ◽  
Selma Gutierrez Antonio ◽  
Hérida Regina Nunes Salgado
Keyword(s):  
Crystallization Process ◽  
Raw Materials ◽  
Regulatory Agencies ◽  
Systemic Absorption ◽  
X Ray ◽  
Polymorphic Forms ◽  
Materials Used ◽  
Irritable Bowel

Abstract Rifaximin is a gut-selective oral antimicrobial that has no systemic adverse effects compared with placebo. It is used for the treatment of hepatic encephalopathy, traveler's diarrhea, irritable bowel syndrome, Clostridium difficile infection, ulcerative colitis, and acute diarrhea. The crystalline form present in rifaximin, α, has minimal systemic absorption compared to the amorphous form. The objective of this study was to obtain polymorphic forms of rifaximin using recrystallization processes. The forms were characterized and studied by thermal analysis, X-ray powder diffraction, scanning electron microscopy, and solubility testing. Six polymorphic forms of rifaximin, designated I–VI, were obtained by the crystallization process by evaporation of the solvent. Some polymorphic forms obtained in this work may not have the same excellent tolerability as the reference medicine; therefore, studies such as these are extremely important and point to the need for greater requirements by the regulatory agencies overseeing polymorph analysis of the raw materials used in the manufacture of medicines marketed globally. These analyses are not required in the majority of official compendia. Partnerships among industries, research centers, and universities would be a viable way to consolidate research in this area and contribute to improving the quality of solid drugs.

scholarly journals Ultrasonic Characterization of the Fiber-Matrix Interfacial Bond in Aerospace Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
D. G. Aggelis ◽  
D. Kleitsa ◽  
T. E. Matikas
Keyword(s):  
Wave Reflection ◽  
Model Material ◽  
Interfacial Bond ◽  
Bonding Quality ◽  
Advanced Composites ◽  
Ultrasonic Characterization ◽  
Fiber Matrix ◽  
Materials Used

The properties of advanced composites rely on the quality of the fiber-matrix bonding. Service-induced damage results in deterioration of bonding quality, seriously compromising the load-bearing capacity of the structure. While traditional methods to assess bonding are destructive, herein a nondestructive methodology based on shear wave reflection is numerically investigated. Reflection relies on the bonding quality and results in discernable changes in the received waveform. The key element is the “interphase” model material with varying stiffness. The study is an example of how computational methods enhance the understanding of delicate features concerning the nondestructive evaluation of materials used in advanced structures.

Physicochemical and bacteriological characterization of hospital effluents and their impact on the environment

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Human Health ◽  
Fecal Coliforms ◽  
Chemical Pollution ◽  
Hospital Effluents ◽  
Biological Contaminants ◽  
Almost All ◽  
Direct Discharge ◽  
Significant Chemical

Liquid effluents discharged by hospitals may contain chemical and biological contaminants whose main source is the different substances used for the treatment of patients. This type of rejection can present a sanitary potentially dangerous risk for human health and can provoke a strong degradation of diverse environmental compartments mainly water and soils. The present study focuses on the quality of the liquid effluents of Hassani Abdelkader’s hospital of Sidi Bel-Abbes (West of Algeria). The results reveal a significant chemical pollution (COD: 879 mgO2/L, BOD5: 850 mgO2/L, NH4+ : 47.9 mg/l, NO2- : 4.2 mg/l, NO3- : 56.8 mg/l with respect to WHO standard of 90 mgO2/L, 30 mgO2/L, 0.5 mg/l, 1 mg/l and 1 mg/l respectively). However, these effluents are biodegradable since the ratio COD/BOD5 do not exceeded the value of 2 in almost all samples. The presence of pathogen germs is put into evidence such as pseudomonas, the clostridium, the staphylococcus, the fecal coliforms and fecal streptococcus. These results show that the direct discharge of these effluents constitutes a major threat to human health and the environment.

Emerging Techniques for the Characterization of Nano-Mechanical Properties of Integrated Circuit Components

2008 ◽  
Author(s):  
Nicholas Randall ◽  
Rahul Premachandran Nair
Keyword(s):  
Mechanical Properties ◽  
Quality Control ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Manufacturing Process ◽  
Solder Bumps ◽  
Initial Work ◽  
Circuit Components ◽  
Materials Used

Abstract With the growing complexity of integrated circuits (IC) comes the issue of quality control during the manufacturing process. In order to avoid late realization of design flaws which could be very expensive, the characterization of the mechanical properties of the IC components needs to be carried out in a more efficient and standardized manner. The effects of changes in the manufacturing process and materials used on the functioning and reliability of the final device also need to be addressed. Initial work on accurately determining several key mechanical properties of bonding pads, solder bumps and coatings using a combination of different methods and equipment has been summarized.

Assessing the Quality of Management of Transformation Processes in Economic Systems

2020 ◽  
Vol 26 (9) ◽  
pp. 952-956
Author(s):  
M. V. Malyshkina ◽  
M. V. Miroslavskaya
Keyword(s):  
Systems Approach ◽  
Mutual Influence ◽  
Organizational Transformation ◽  
Quality Criterion ◽  
Economic Transformation ◽  
Economic Systems ◽  
Negative Consequences ◽  
Management Actions ◽  
Transformation Processes

Aim. The presented study aims to develop the methodology for assessing the quality of management of organizational transformation processes. Tasks. To achieve the set aim, the authors solve the following problems: determine the essence and content of socio-economic transformation, formulate quality assurance principles for the management of transformation processes, draw attention to the problem of selecting a unified quality criterion for the management of organizational transformation processes. Methods. This study uses general scientific methods of cognition, including analysis and synthesis. It also applies a systems approach to identify the major problems of assessing the quality of management of transformation processes, including the problem of selecting a unified quality criterion for the management of transformation processes and formulating the principles of ensuring the quality of management of transformation processes. Results. The global problem of managing transformation processes in the economic system consists in the complexity of the managed processes, which increases due to the multidimensionality, mutual influence, and the resulting uncertainty of interactions between the elements of the system. It is concluded that the methodology for assessing the quality of management of transformation processes is based on the principle of integrating separate measures to improve the quality of management of system elements into a single system of management actions and the principle of ensuring that management actions are primarily aimed at preventing possible negative consequences of the transformation of economic systems, i.e. reducing the potential impact of unfavorable events and their consequences. To assess the effectiveness of targeted management actions and productive actions aimed at organizing, controlling, and guiding the transformation process, the authors actualize the problem of selecting an adequate quality criterion for the management of transformation processes in economic systems and put forward a hypothesis about a possible unified criterion of management quality. Conclusions. The principle of integrating separate measures to improve the quality of management of system elements and the principle of ensuring that management actions are aimed at preventing possible negative consequences lie at the core of the methodology for assessing the quality of management of transformation processes in economic systems. The quality assessment methodology should be developed in the direction of finding a unified quality criterion for managing transformation processes in economic systems.

CUIDADOS BUCAIS EM PACIENTES VENTILADOS MECANICAMENTE: CONHECIMENTO DE ENFERMEIROS DE UM HOSPITAL ESCOLA

2018 ◽  
Vol 8 (4) ◽  
Author(s):  
Gérsica Sampaio Silva ◽  
Fernanda Alves Ferreira Gonçalves ◽  
Bárbara Ribeiro Miquelin Bueno ◽  
Georlucya Kátia Da Silva Ferreira ◽  
Ludmila Pinheiro Da Silva ◽  
...  
Keyword(s):  
Oral Hygiene ◽  
Oral Care ◽  
Cross Sectional Study ◽  
Cross Sectional ◽  
Mechanically Ventilated ◽  
Mechanically Ventilated Patients ◽  
Complicating Factors ◽  
Materials Used ◽  
Ventilated Patients

Objetivo: Avaliar o conhecimento acerca dos cuidados bucais realizados por enfermeiros a pacientes ventilados mecanicamente. Método: Estudo transversal, realizado em um hospital escola de Goiânia/Goiás. A coleta de dados deu-se por meio de questionário estruturado. Resultados: Os enfermeiros conhecem as medidas recomendadas sobre higiene bucal. Os fatores dificultadores encontrados foram a falta de pessoal (21,7%), falta de tempo (16,7%) e trabalhos burocráticos (15%). Contudo ainda existem lacunas no que se refere a produtos e materiais utilizados na higiene bucal. Conclusão: As Lacunas e os fatores dificultadores sinalizados nesse estudo merecem reflexão, como forma de avaliar a qualidade do cuidado oferecido.Descritores: Biofilme; Higiene Bucal; Cuidados de enfermagem.ORAL CARE IN MECHANICALLY VENTILATED PATIENTS: KNOWLEDGE OF NURSES FROM A SCHOOL HOSPITALObjective: To evaluate the knowledge about oral care performed by nurses in mechanically ventilated patients. Methods: a cross-sectional study, conducted in a teaching hospital of Goiania/Goias. The data collection was performed by means of a structured questionnaire. Results: The nurses know the measures recommended on oral hygiene. The complicating factors found were the lack of personnel (21.7%), lack of time (16.7%) and work on tape (15%). However there are still gaps in relation to products and materials used in oral hygiene. Conclusion: The gaps and the factors complicating factors indicated in this study deserve consideration, as a means of evaluating the quality of care offered.Keywords: Biofilm; Oral hygiene; Nursing care.CUIDADO ORAL EN PACIENTES CON VENTILACIÓN MECÁNICA: EL CONOCIMIENTO DE LAS ENFERMERAS DEL HOSPITAL ESCUELAObjetivo: Evaluar el conocimiento sobre el cuidado bucal realizadas por enfermeras en pacientes ventilados mecánicamente. Métodos: Estudio transversal, realizado en un hospital de Goiania y Goias. La recolección de datos se realizó por medio de un cuestionario estructurado. Resultados: Las enfermeras saben las medidas recomendadas en la higiene bucal. Los factores encontrados fueron la falta de personal (21,7%), la falta de tiempo (16,7%) y trabajar en la cinta (15%). Sin embargo todavía hay lagunas en relación con los productos y los materiales utilizados en la higiene bucal. Conclusión: Las brechas y los factores factores indicados en este estudio merecen consideración, como medio de evaluar la calidad de la atención ofrecida.Palabras clave: Biofilme; Higiene Bucal; Atención de Enfermería.

Sign in / Sign up

Export Citation Format

Share Document