Design and Analysis of Rectangular Microstrip Patch Array Antenna on 28 GHz Band for Future of 5G

2021 ◽  
pp. 25-43
Author(s):  
Ashraf Aboshosha ◽  
Mohamed B. El-Mashade ◽  
Ehab A. Hegazy
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Array Antenna ◽  
Spectrum Efficiency ◽  
Microstrip Patch ◽  
Fifth Generation ◽  
Data Rates ◽  
Input Multiple Output ◽  
Mobile Phone Applications ◽  
Mm Waves

The narrow beam widths generally associated with antennas at higher frequencies has led to the study of using advanced multiple-input multiple-output (MIMO) and adaptive beam-forming. These antenna technologies are overcoming some of the challenging propagation characteristics of mm waves and could increase the spectrum efficiency, provide higher data rates, and adequate reasonable coverage for mobile broadband services. With the potential for higher 10+GHz frequencies as well as mm waves deployment, most 5G candidates bands in 20 to 50 GHz. The frequency band of 5G is proposed and demonstrated above 24GHz such as 28GHz to 38GHz. In this chapter, the authors present a design of 28GHz for 4 Elements microstrip patch array antenna for future fifth generation (5G) mobile-phone applications. The designed antenna can be implemented using low cost FR-4 substrates, while maintaining good performance in terms of gain and efficiency. In addition, the simulated results show that the antenna has the S11 response less than -10 dB in the frequency range of 22 to 34 GHz.

Design and Analysis of Rectangular Microstrip Patch Array Antenna on 28 GHz Band for Future of 5G

2019 ◽  
pp. 71-89
Author(s):  
Ashraf Aboshosha ◽  
Mohamed B. El-Mashade ◽  
Ehab A. Hegazy
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Array Antenna ◽  
Spectrum Efficiency ◽  
Microstrip Patch ◽  
Fifth Generation ◽  
Data Rates ◽  
Input Multiple Output ◽  
Mobile Phone Applications ◽  
Mm Waves

The narrow beam widths generally associated with antennas at higher frequencies has led to the study of using advanced multiple-input multiple-output (MIMO) and adaptive beam-forming. These antenna technologies are overcoming some of the challenging propagation characteristics of mm waves and could increase the spectrum efficiency, provide higher data rates, and adequate reasonable coverage for mobile broadband services. With the potential for higher 10+GHz frequencies as well as mm waves deployment, most 5G candidates bands in 20 to 50 GHz. The frequency band of 5G is proposed and demonstrated above 24GHz such as 28GHz to 38GHz. In this chapter, the authors present a design of 28GHz for 4 Elements microstrip patch array antenna for future fifth generation (5G) mobile-phone applications. The designed antenna can be implemented using low cost FR-4 substrates, while maintaining good performance in terms of gain and efficiency. In addition, the simulated results show that the antenna has the S11 response less than -10 dB in the frequency range of 22 to 34 GHz.

scholarly journals Realizing a 140 GHz Gap Waveguide–Based Array Antenna by Low-Cost Injection Molding and Micromachining

2021 ◽  
Author(s):  
Sadia Farjana ◽  
Mohammadamir Ghaderi ◽  
Ashraf Uz Zaman ◽  
Sofia Rahiminejad ◽  
Thomas Eriksson ◽  
...  
Keyword(s):  
Injection Molding ◽  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Network Capacity ◽  
Array Antenna ◽  
Single Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Planar Array ◽  
Pdms Molding

AbstractThis paper presents a novel micromachining process to fabricate a 140 GHz planar antenna based on gap waveguide technology to be used in the next-generation backhauling links. The 140 GHz planar array antenna consists of three layers, all of which have been fabricated using polymer-based microfabrication and injection molding. The 140 GHz antenna has the potential to be used as an element in a bigger 3D array in a line-of-sight (LOS) multiple input multiple output (MIMO) configuration to boost the network capacity. In this work, we focus on the fabrication of a single antenna array element based on gap waveguide technology. Depending on the complexity of each antenna layer’s design, three different micromachining techniques, SU8 fabrication, polydimethylsiloxane (PDMS) molding, and injection molding of the polymer (OSTEMER), together with gold (Au) coating, have been utilized to fabricate a single 140 GHz planar array antenna. The input reflection coefficient was measured to be below − 11 dB over a 14% bandwidth from 132 to 152 GHz, and the antenna gain was measured to be 31 dBi at 140 GHz, both of which are in good agreement with the simulations.

scholarly journals An Efficient Signal Reconstruction Algorithm for Stepped Frequency MIMO-SAR in the Spotlight and Sliding Spotlight Modes

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Jiajia Zhang ◽  
Guangcai Sun ◽  
Mengdao Xing ◽  
Zheng Bao ◽  
Fang Zhou
Keyword(s):  
Efficient Algorithm ◽  
Low Cost ◽  
Signal Reconstruction ◽  
Multiple Input Multiple Output ◽  
Reconstruction Algorithm ◽  
Synthetic Aperture ◽  
Two Dimensional ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Stepped Frequency

Multiple-input multiple-output (MIMO) synthetic aperture radar (SAR) using stepped frequency (SF) waveforms enables a high two-dimensional (2D) resolution with wider imaging swath at relatively low cost. However, only the stripmap mode has been discussed for SF MIMO-SAR. This paper presents an efficient algorithm to reconstruct the signal of SF MIMO-SAR in the spotlight and sliding spotlight modes, which includes Doppler ambiguity resolving algorithm based on subaperture division and an improved frequency-domain bandwidth synthesis (FBS) method. Both simulated and constructed data are used to validate the effectiveness of the proposed algorithm.

scholarly journals Performance analysis of IEEE 802.11ac based WLAN in wireless communication systems

2019 ◽  
Vol 9 (2) ◽  
pp. 1131 ◽  
Author(s):  
A. Z. Yonis
Keyword(s):  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Area Network ◽  
Data Rates ◽  
Input Multiple Output ◽  
Ieee 802.11Ac ◽  
5 Ghz

<p><span lang="EN-US">IEEE 802.11ac based wireless local area network (WLAN) is emerging WiFi standard at 5 GHz, it is new gigabit-per-second standard providing premium services. IEEE 802.11ac accomplishes its crude speed increment by pushing on three distinct measurements firstly is more channel holding, expanded from a maximum of 80 MHz up to 160 MHz modes. Secondly, the denser modulation, now using 256-QAM, it has the ability to increase the data rates up to 7 Gbps using an 8×8 multiple input multiple output (MIMO). Finally, it provides high resolution for both narrow and medium bandwidth channels. This work presents a study to improve the performance of IEEE 802.11ac based WLAN system.</span></p>

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

scholarly journals Total Local Dose in Hypothetical 5G Mobile Networks for Varied Topologies and User Scenarios

2020 ◽  
Vol 10 (17) ◽  
pp. 5971 ◽  
Author(s):  
Sven Kuehn ◽  
Serge Pfeifer ◽  
Niels Kuster
Keyword(s):  
Mobile Networks ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Monte Carlo Analysis ◽  
5G Networks ◽  
Fifth Generation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Network Topologies ◽  
5G Mobile Networks

In this study, the total electromagnetic dose, i.e., the combined dose from fixed antennas and mobile devices, was estimated for a number of hypothetical network topologies for implementation in Switzerland to support the deployment of fifth generation (5G) mobile communication systems while maintaining exposure guidelines for public safety. In this study, we consider frequency range 1 (FR1) and various user scenarios. The estimated dose in hypothetical 5G networks was extrapolated from measurements in one of the Swiss 4G networks and by means of Monte Carlo analysis. The results show that the peak dose is always dominated by an individual’s mobile phone and, in the case of non-users, by the bystanders’ mobile phones. The reduction in cell size and the separation of indoor and outdoor coverage can substantially reduce the total dose by >10 dB. The introduction of higher frequencies in 5G mobile networks, e.g., 3.6 GHz, reduces the specific absorption rate (SAR) in the entire brain by an average of −8 dB, while the SAR in the superficial tissues of the brain remains locally constant, i.e., within ±3 dB. Data from real networks with multiple-input multiple-output (MIMO) were not available; the effect of adaptive beam-forming antennas on the dose will need to be quantitatively revisited when 5G networks are fully established.

scholarly journals An Evaluation of Successive Pilot Decontamination in Massive MIMO

2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão
Keyword(s):  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Pilot Training ◽  
Pilot Contamination ◽  
Fundamental Issue ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.

scholarly journals Power Scaling for Spatial Modulation with Limited Feedback

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Yue Xiao ◽  
Qian Tang ◽  
Lisha Gong ◽  
Ping Yang ◽  
Zongfei Yang
Keyword(s):  
System Performance ◽  
Multiple Input Multiple Output ◽  
Main Idea ◽  
Limited Feedback ◽  
Low Complexity ◽  
Spatial Diversity ◽  
Spectrum Efficiency ◽  
Spatial Modulation ◽  
Power Scaling ◽  
Input Multiple Output

Spatial modulation (SM) is a recently developed multiple-input multiple-output (MIMO) technique which offers a new tradeoff between spatial diversity and spectrum efficiency, by introducing the indices of transmit antennas as a means of information modulation. Due to the special structure of SM-MIMO, in the receiver, maximum likelihood (ML) detector can be combined with low complexity. For further improving the system performance with limited feedback, in this paper, a novel power scaling spatial modulation (PS-SM) scheme is proposed. The main idea is based on the introduction of scaling factor (SF) for weighting the modulated symbols on each transmit antenna of SM, so as to enlarge the minimal Euclidean distance of modulated constellations and improve the system performance. Simulation results show that the proposed PS-SM outperforms the conventional adaptive spatial modulation (ASM) with the same feedback amount and similar computational complexity.

scholarly journals A Survey on Massive MIMO Systems in Presence of Channel and Hardware Impairments

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 164 ◽  
Author(s):  
Zahra Mokhtari ◽  
Maryam Sabbaghian ◽  
Rui Dinis
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo Systems ◽  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Aging Effects ◽  
Hardware Impairments ◽  
Single Carrier ◽  
Input Multiple Output

Massive multiple input multiple output (MIMO) technology is one of the promising technologies for fifth generation (5G) cellular communications. In this technology, each cell has a base station (BS) with a large number of antennas, allowing the simultaneous use of the same resources (e.g., frequency and/or time slots) by multiple users of a cell. Therefore, massive MIMO systems can bring very high spectral and power efficiencies. However, this technology faces some important issues that need to be addressed. One of these issues is the performance degradation due to hardware impairments, since low-cost RF chains need to be employed. Another issue is the channel estimation and channel aging effects, especially in fast mobility environments. In this paper we will perform a comprehensive study on these two issues considering two of the most promising candidate waveforms for massive MIMO systems: Orthogonal frequency division multiplexing (OFDM) and single-carrier frequency domain processing (SC-FDP). The studies and the results show that hardware impairments and inaccurate channel knowledge can degrade the performance of massive MIMO systems extensively. However, using suitable low complex estimation and compensation techniques and also selecting a suitable waveform can reduce these effects.

Sign in / Sign up

Export Citation Format

Share Document