A Tapered Fork-Shaped Antenna With Small Ground Plane for UWB Applications

2021 ◽  
Vol 13 (1) ◽  
pp. 13-24
Author(s):  
Amro A. Nour ◽  
Ali Bostani ◽  
Girish Awadhwal
Keyword(s):  
Finite Element ◽  
Impedance Matching ◽  
Ground Plane ◽  
Wide Band ◽  
Federal Communications Commission ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Uwb Antenna ◽  
Bandwidth Enhancement ◽  
Uwb Applications

A tapered fork-shaped antenna having small ground for ultra-wide band (UWB) antenna is proposed in this paper. Finite element method has been successfully employed to simulate and optimize the feed line, ground, and tapered fork-shaped diameter to enhance the performance of the antenna in terms of bandwidth obviously for the ultra-wideband purposes. An acceptable impedance matching performance has been achieved, which is a band wider than the UWB band that is defined by the Federal Communications Commission (FCC). In this paper, the detailed design parameters including the key elements in bandwidth enhancement is presented. The results of the finite element simulations have been presented as well indicating the return loss and radiation pattern of the proposed antenna.

Design of a compact UWB antenna with a partial ground plane on epoxy woven glass material

2017 ◽  
Vol 24 (1) ◽  
pp. 73-79
Author(s):  
Md. Moinul Islam ◽  
Mohammad Tariqul Islam ◽  
Mohammad Rashed Iqbal Faruque ◽  
Rabah W. Aldhaheri ◽  
Md. Samsuzzaman
Keyword(s):  
Dielectric Material ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Uwb Antenna ◽  
Glass Material ◽  
Measurement Results ◽  
Good Term ◽  
Parametric Analyses ◽  
Uwb Applications

AbstractA compact ultra-wideband (UWB) antenna is presented in this paper with a partial ground plane on epoxy woven glass material. The study is discussed to comprehend the effects of various design parameters with explicit parametric analyses. The overall antenna dimension is 0.22×0.26×0.016 λ. A prototype is made on epoxide woven glass fabric dielectric material of 1.6 mm thickness. The measured results point out that the reported antenna belongs to a wide bandwidth comprehending from 3 GHz to more than 11 GHz with VSWR<2. It has a peak gain of 5.52 dBi, where 3.98 dBi is the average gain. Nearly omnidirectional radiation patterns are observed within the operating frequency bands. A good term exists between simulation and measurement results, which lead the reported antenna to be an appropriate candidate for UWB applications.

scholarly journals A compact disc loaded curved elliptical shaped ultra-wideband MIMO antenna

2018 ◽  
Vol 7 (2.7) ◽  
pp. 597
Author(s):  
EVV Satyanarayana ◽  
Vivek Kumar ◽  
D Mallikarjun Reddy ◽  
T Siva Paravathi ◽  
J Chandrasekhar Rao
Keyword(s):  
Common Ground ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Ultra Wideband ◽  
Portable Devices ◽  
Mimo Antenna ◽  
Uwb Applications

The ultra wide band (UWB) Multiple-Input- Multiple-Output (MIMO) antenna with coplanar waveguide (CPW) having size of 18 x 23 x 0.8mm3 is designed for ultra-wideband (UWB) applications. The designed MIMO antenna contains two symmetrical circular disc loaded curved elliptical monopoles on top of the substrate and common ground plane with Y slot and extended T-shaped stub on bottom of substrate. The T- shape stub is placed on the ground plane to have the better antenna impedance matching and to enhance the isolation between the two antenna ports. To further improve the isolation in between the ports 1 and 2, and also on the ground plane a Y-shaped slot is fixed. Good impedance matching (|S11| < -10dB) in the range from 2.8GHz to 12 GHz is provided by the proposed antenna, and an enhanced isolation of -27dB, low ECC of below 0.002, an acceptable gain of about 7 dBi and an efficiency of above 90%. The obtained result proves that the designed antenna is more appropriate for the portable devices.  

scholarly journals Compact Enhanced CPW-Fed Antenna for UWB Applications

2021 ◽  
Vol 10 (1) ◽  
pp. 15-20
Author(s):  
H. Abdi ◽  
J. Nourinia ◽  
C. Ghobadi
Keyword(s):  
Low Cost ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Compact Antenna ◽  
Low Profile ◽  
Rectangular Slit ◽  
Operating Bandwidth ◽  
Uwb Applications ◽  
Operational Range

This paper presents a compact antenna with co-planar waveguide (CPW) feed line for ultra-wideband (UWB) applications. The proposed antenna consists of a beveled radiating patch with wide rectangular slit at its upper side and a partial ground plane with insertion of symmetrically two-step beveled tapers at its center and sides, which provides a wide operating bandwidth. The antenna is integrated with narrow rectangular-shaped parasitic elements with different lengths placed adjacent to radiant patch to significantly enhance the impedance matching and bandwidth, especially at the upper frequencies. The measured results show an |S11| less than -10 dB bandwidth of 2.5-19.8 GHz with 155% fractional bandwidth. Simulation results are in good agreement with experimental measurements, which exhibits the validity of the proposed design approach. Moreover, the proposed CPW-fed antenna shows omnidirectional radiation patterns with stable gain within the operational range. The proposed compact antenna with low profile, light weight, large frequency bandwidth, ease of fabrication and low cost material is suitable for UWB applications.

scholarly journals Bandwidth Enhancement of a Bell-shaped UWB Antenna for Indoor Localization Systems

2021 ◽  
Vol 11 (1) ◽  
pp. 6691-6695
Author(s):  
M. S. Karoui ◽  
N. Ghariani ◽  
M. Lahiani ◽  
H. Ghariani
Keyword(s):  
Indoor Localization ◽  
Low Cost ◽  
Ground Plane ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Simple Method ◽  
Bandwidth Enhancement ◽  
Measured Impedance ◽  
Localization Systems

In this paper, a simple method of enhancing the bandwidth of the Bell-shaped UWB Antenna for indoor localization systems is proposed. Therefore, a modified version of the bell-shaped Ultra-Wide Band (UWB) antenna for indoor localization systems is presented. The proposed antenna is printed on a low-cost FR-4 substrate of 21×27×1.6mm3 size. It is composed of a bell-shaped radiating patch and a multi-slotted ground plane. The measured results show that the proposed antenna has an impedance bandwidth of about 11.2GHz ranging from 3.16GHz to 14.36GHz at S11<−10dB. Compared to the original version, an enhancement of about 5.56GHz in the measured impedance bandwidth was observed.

scholarly journals A 3 – 18 GHz UWB Antenna with modified feed-line

2021 ◽  
Author(s):  
Srikanth Itapu
Keyword(s):  
Medical Imaging ◽  
Planar Waveguide ◽  
Ground Plane ◽  
Wide Band ◽  
Ultra Wide Band ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Feed Line ◽  
Iot Applications

Abstract A Co-Planar Waveguide fed circular ultra-wide band antenna with modified ground-plane and feedline is designed on a FR4 (ϵr=4.3) substrate of thickness 0.01λ0. The proposed antenna exhibits an overall impedance bandwidth ranging from 2.99 GHz to 18.0 GHz and beyond (with S11< -10 dB). Design parameters have been optimized to achieve the UWB bandwidth. The measured radiation patterns of this antenna are omnidirectional in H- plane and bidirectional in E-plane. An extended impedance bandwidth is achieved as a result of modified feed-line. The proposed antenna can be used for medical imaging and urban IoT applications.

scholarly journals A CPW-fed Irregular Shaped Hexagonal Patch Antenna with Elliptical Substrate for UWB Applications

2019 ◽  
Vol 9 (2) ◽  
pp. 373-376
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Total Efficiency ◽  
Uwb Antenna ◽  
Radiation Characteristics ◽  
Wide Range ◽  
Uwb Applications ◽  
Novel Design ◽  
Peak Gain

A novel design of Ultra-Wideband (UWB) antenna with irregularly shaped hexagonal patch built on the elliptical-shaped FR-4 laminate with εr = 4.3 and tanδ = 0.025 is presented. The feed mechanism utilized in the structure proposed is modified co-planar waveguide (CPW), the feeding microstrip is tapered near the connecting edge of the patch for better impedance matching. The proposed antenna is compared with the traditional rectangular substrate and found that the elliptical substrate enhances the radiation characteristics of the antenna and is capable of functioning effectively in the range of 3.1 GHz-11.7 GHz, accompanied by the total efficiency > 86% across the whole FCC allocated UWB operating band. The antenna can be used for wide range of UWB applications as it exhibits good omnidirectional characteristics with a realized peak gain of 4.178dB and an average realized gain of 3.063dB. The simulation work of the antenna is accomplished using CST Studio (v. 2014).

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

scholarly journals Mutual Coupling Reduction Using a Protruded Ground Branch Structure in a Compact UWB Owl-Shaped MIMO Antenna

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Mutual Coupling ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) multiple input-multiple output (MIMO) antenna with high isolation is designed for UWB applications. The proposed MIMO antenna consists of two identical monopole antenna elements. To enhance the impedance matching, three slots are formed on the ground plane. The arc structure as well as the semicircle with an open-end slot is employed on the radiating elements the fact which helps to extend the impedance bandwidth of the monopole antenna from 3.1 up to 10.6 GHz, which corresponds to the UWB band. A ground branch decoupling structure is introduced between the two elements to reduce the mutual coupling. Simulation and measurement results show a bandwidth range from 3.1 to 11.12 GHz with |S11_|<−15 dB, |S21_|<−20 dB, and ECC < 0.002.

A CPW-fed stepped slot UWB antenna for MIMO/diversity applications

2015 ◽  
Vol 9 (1) ◽  
pp. 151-162 ◽  
Author(s):  
Raj Kumar ◽  
Neha Pazare
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Slot Antennas ◽  
Capacity Loss ◽  
Field Radiation

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

scholarly journals Design of a Compact UWB Antenna with Triple Band-Notched Characteristics

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Qiang Wang ◽  
Yan Zhang
Keyword(s):  
Input Impedance ◽  
Impedance Matching ◽  
Ground Plane ◽  
Surface Current ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Notch Band ◽  
Parametric Studies ◽  
Triple Band

A new compact ultra-wideband (UWB) antenna with triband-notched characteristics is presented. The structure of the proposed antenna is simple and symmetric. A modified ground is introduced to obtain a wide impedance bandwidth of 2.9–13.4 GHz withS11<-10 dB. By inserting two arc-shaped slots in the radiation patch, two sharp bands of 3.3–3.7 GHz and 5.15–5.35 GHz are notched. The notch band of 7.25–7.75 GHz is achieved by etching a U-shaped slot in the ground plane. The notched bands can be controlled, respectively, while the characteristics of the proposed UWB antenna almost keep completely unchanged at the unnotched frequencies. Equivalent circuit models, surface current distributions, and input impedance are applied to analyze the principle of the proposed UWB antenna. Parametric studies are given. Simulated and measured results show that the proposed antenna has good impedance matching, stable radiation patterns, and constant gain.

Sign in / Sign up

Export Citation Format

Share Document