Improved Passive Solar Hot-Air Heating of Residential Design and Research

2012 ◽  
Vol 178-181 ◽  
pp. 88-91
Author(s):  
Bin Yang ◽  
Shu Guang Jiang

Climate characteristics of Shihezi area, present passive solar building planning and design of residential and architectural design requirements; Through the improvement of traditional passive solar heating system, and adopt collection hot wall completely cover housing south wall and other measures to improve thermal efficiency sets. To pilot project as an example, the use of SLR method calculated, the system, in Shihezi the coldest month is January, solar fraction can reach 31%.

Author(s):  
Joseph John Hobbs

This paper examines how the architectural, social, and cultural heritage of the United Arab Emirates and other Gulf countries may contribute to better development of this region’s lived environment. Modern urbanism has largely neglected heritage in architectural design and in social and private spaces, creating inauthentic places that foster a hunger for belongingness in the UAE’s built environment. The paper reviews recent urban developments in the UAE and the Gulf Region, and identifies elements of local heritage that can be incorporated into contemporary planning and design. It proposes that adapting vernacular architectural heritage to the modern built environment should not be the principal goal for heritage-informed design. Instead we may examine the social processes underlying the traditional lived environment, and aim for social sustainability based on the lifeways and preferences of local peoples, especially in kinship and Islamic values. Among the most promising precedents for modern social sustainability are social and spatial features at the scale of the neighborhood in traditional Islamic settlements. Interviews with local Emiratis will also recommend elements of traditional knowledge to modern settings. 


2014 ◽  
Vol 908 ◽  
pp. 355-358
Author(s):  
Jie Zhao

With the development of economy and the improvement of people's living level, improving living conditions and public buildings, architectural design requirements are also constantly improved. Modern architecture should consider not only beautiful and comfortable, but also take into account the design individuality, while taking into consideration the people-oriented design concept of environmental protection and energy saving. This also makes the environmental friendly and energy-saving building is the development direction of future architecture. This paper analyzes the modern architecture of the ecological and environmental protection, gives the method to realize the construction of energy-saving environmental protection design and the use of new materials, new equipment and new technology of the existing.


2017 ◽  
Vol 41 (5) ◽  
pp. 397-417 ◽  
Author(s):  
A Romanska-Zapala ◽  
M Bomberg ◽  
M Fedorczak-Cisak ◽  
M Furtak ◽  
D Yarbrough ◽  
...  

The quest for a sustainable built environment brought dramatic changes to architectural design because of the integrated design process. The integrated design process is the modern way to realize “performance architecture,” that is, design with a view to field performance. Integrated design process permits merging of concepts from passive-house designs, solar engineering, and an integration of the building enclosure with mechanical services. In part 1 of this series, the emergence of many new multi-functional materials was discussed. Yet, current innovation is guided by lessons from history. Thermal mass in heavy masonry buildings allowed periodic heating. The authors postulate integration of a hydronic heating system with the walls and the use of smart temperature control of the heating system to modify and optimize the thermal mass contribution. To use the mass of a building, one must accept transient temperature conditions where the indoor temperature varies but is confined by comfort requirements for both summer and winter conditions. On the other side, resiliency requirements dictate that in the absence of electricity the air temperature does not fall below about 12°C over a period of several hours. This requirement implies that summer cooling will likely be separated from the heating systems and that operation of a low-energy building is heavily dependent on the design of smart control systems. Analysis of control systems provided in this article for earth-to-air heat exchangers and cooling of houses with lightweight walls lead us to the requirements of separation between heating and ventilation and needs for different sources of fresh air. Finally, a new concept emerges.


Author(s):  
Agarwal A. ◽  
Seretse O.M ◽  
Letsatsi M.T ◽  
Maele L.T ◽  
Koketso D

Author(s):  
M. H. de Wit ◽  
J. L. M. Hensen ◽  
H. A. L. van Dijk ◽  
G. J. van den Brink ◽  
E. van Galen

2020 ◽  
Author(s):  
Melissa Cate Christ ◽  
Hendrik Tieben

With one of the highest population densities in the world, Hong Kong suffers from a lack of public open space. Despite this situation, open spaces provided by government authorities or private developers often do not meet residents’ needs or include residents in the planning and design process. To explore one way that this issue is being addressed, this chapter describes an ongoing placemaking project within Hong Kong’s interstitial network of laneways (里) and alleys (巷). The key historical, sociocultural, and physical features, opportunities, and constraints of these in-between spaces are discussed. This is followed by an in-depth exploration of the case study Magic Lanes, a pilot project that aims to provide more inclusive public open spaces through placemaking and community co-creation.


Author(s):  
Gary T. Moore

This chapter addresses the question of how research on environmental assessment, cognition, and action can be utilized in the professional arenas of public policy, urban planning, and architectural design. Initially a discussion on three papers (Chapters 12, 13, and 14), the chapter attempts to extrapolate policy and design implications for the built environment from current knowledge on life-span developmental issues as represented by these three chapters. Suggestions of other research questions, issues, and strategies that might better inform policy and design are then discussed. In conclusion, the chapter briefly explores six general issues about the interaction of environmental cognition and research utilization. The contributions to this volume by Giovanna Axia, Erminielda Mainardi Peron, and Maria Rosa Baroni, by Lynn Liben, and by Roger Hart and Michael Conn have dealt heavily with child development and very little with aging or life-span development. Little evidence is presented from the gerontological and geriatric literatures, and less from the life-span literature. Liben presents a clear conceptualization of lifespan developmental approaches to environmental cognition, but to date there have been few studies and thus no data specifically on life-span developmental changes in environmental cognition. My chapter, therefore, will be weighted most heavily on the earlier phases of human development though, where feasible, it will comment on implications for the environment of elderly adults and on the environmental context of life-span developmental changes. Despite their titles and intentions, the three chapters focus most heavily on environmental cognition and much less on assessment and action. For example, after discussing the wide variety of possible definitions of assessment, including appraisal, evaluation, preferences, and attachment. Axia et al. focus most heavily on the cognitive aspects of schemata, representation, and organization of knowledge. Similarly, Hart and Conn valiantly take on the challenge of reporting on children's decision making and environmental behavior, but their empirical examples are also limited to cognitive and metacognitive issues. My chapter will thus also focus on environmental knowing. There are many interesting points of a theoretical and conceptual nature to raise about environmental assessment, cognition, and action from these three chapters, but this task is left to the other commentary chapter by Christopher Spencer.


Logistics ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 30
Author(s):  
Elnaz Irannezhad

This paper presents the value proposition of blockchain for Port Community Systems (PCS) by dissecting the business processes in port logistics and unfolding functionalities of blockchain in lowering the transaction cost. This paper contributes to the research by a detailed technical assessment of the plethora of currently available blockchain platforms and consensus mechanisms, against the identified requirements in this specific use case. The results of this technical assessment highlight the central value proposition of blockchain for landlord ports, which is independency from a central authority as the controlling agent. Bridging between two research domains of Information Technology and Logistics, this paper proposes the preferred architectural design requirements of a blockchain-based PCS, including provisioning private sidechains, modular design with inter-chain interoperability, and encrypted off-chain data storage. Availability—the readiness for correct service, and reliability—the continuity of correct service, are heavily reliant on the right choice being made for blockchain design for such a complex use case. A preliminary comparative analysis among different decentralisation levels in this paper suggests that a permissioned public blockchain offers the best trade-off in performance measures for this use case. This technical review identifies six research agenda from a design perspective.


2012 ◽  
Vol 450-451 ◽  
pp. 995-998
Author(s):  
Zhe Tao Xiao ◽  
Wen Ye Gong ◽  
Li Jun Hao

Urban residential areas are the first communication space that children enter society. Recreational site are integral part of urban residential areas. In the specific planning and design, it is often to be ignored, or adult. This paper analyzes the design requirements of the children's recreational site and studies the site design elements. It hopes to provide a reference for the design of children's outdoor activities in urban residential areas.


Author(s):  
Brian S. Robinson ◽  
M. Keith Sharp

A 12′ by 24′ passive solar test building has been constructed on the campus of the University of Louisville. The building envelope is comprised of structural insulated panels (SIPs), 12″ thick, (R-value of 45 ft2F/Btu) for the floor and walls and 16″ (R-63) for the roof. The building is divided into two symmetrical rooms with a 12″ SIPs wall separating the rooms. All joints between panels are caulked to reduce infiltration. Each room contains one window (R-9) on the north side wall, and two windows (also R-9) facing south for ventilation and daylighting, but which will also provide some direct gain heating. The south wall of each room features an opening that will accommodate a passive solar heating system so that performance of two systems can be compared side-by-side. The overhang above the south openings is purposely left short to accommodate an awning to provide adjustable shading. The calculated loss coefficient (UA) for each room of the building is 6.07 W/K. Each room is also equipped with a data acquisition system consisting on an SCXI 1600 16 bit digitizer and an SCXI 1102B isolation amplifier with an SCXI 1303 thermocouple module. Pyranometers are placed on the south wall and the clerestory wall to measure insolation on the solar apertures. For initial tests, one room is equipped with an original heat pipe system previously tested in another building, while the other is equipped with a modified heat pipe system. Changes to the modified system include copper absorbers versus aluminum, an adiabatic section constructed of considerably less thermally-conductive DPM rubber than the copper used for the original design, and one of the five condenser sections of the heat pipes is exposed directly to the room air to provide early-morning heating. Experimental results will be compared to simulations with as-built building characteristics and actual weather data. Previous simulations with a load to collector ratio of 10 W/m2K, a defined room comfort temperature range between 65°F to 75°F, and TMY3 weather data for Louisville, KY, showed that the modified heat pipe wall design improves annual solar fraction by 16% relative to the original design.


Sign in / Sign up

Export Citation Format

Share Document