Parabolic-Apex Numerical Back-Analysis of Mechanics Parameters of Surrounding Rock

2012 ◽  
Vol 204-208 ◽  
pp. 196-201 ◽  
Author(s):  
Jian Cong Xu ◽  
Yi Wei Xu
Keyword(s):  
Young’S Modulus ◽  
Young's Modulus ◽  
Pressure Coefficient ◽  
Back Analysis ◽  
Surrounding Rock ◽  
In Situ Monitoring ◽  
Monitoring Data ◽  
3D Fem ◽  
Physical Mechanics

The parabolic-apex numerical back-analysis method (PNBM) was proposed to obtain such physical-mechanics parameters as Young's modulus and lateral pressure coefficient of surrounding rock by 3D FEM numerical analysis based on in-situ monitoring data. Taking Xiang-an Subsea Tunnel (located in Xiamen, Fujian Province, China) for example, adopting the PNBM using ABAQUS software, three dimensional elastic-plastic FEM-PNBM of tunnel surrounding rock was validated using in-situ monitoring data. The results show as follows: Using the PNBM, not only may high calculation precision be obtained, better meeting the demand of actual projects, but also more reasonable and reliable physical mechanics indices of surrounding rock such as Young's modulus and lateral confinement pressure coefficient, may be obtained. The applicability and the simplicity of this proposed method also support its usefulness.

scholarly journals Analytical Solution of a Circular Opening considering Nonuniform Pressure and Its Engineering Application

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Peng Wu ◽  
Yanlong Chen ◽  
Liang Chen ◽  
Xianbiao Mao ◽  
Wei Zhang
Keyword(s):  
Analytical Solution ◽  
Plastic Zone ◽  
Young’S Modulus ◽  
Lateral Pressure ◽  
Young's Modulus ◽  
Pressure Coefficient ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Circular Opening ◽  
Lateral Pressure Coefficient

Based on the Mohr–Coulomb criterion, a new analytical solution of a circular opening under nonuniform pressure was presented, which considered rock dilatancy effect and elastic-brittle-plastic failure characteristics. In the plastic zone, the attenuation of Young’s modulus was considered using a radius-dependent model (RDM), and solution of the radius and radial displacement of plastic zone was obtained. The results show that many factors have important impact on the response of the surrounding rock, including lateral pressure coefficient, dilation coefficient, buried depth, and Young’s modulus attenuation. Under nonuniform pressure condition, the distribution of plastic zone and deformation around the opening show obvious nonuniform characteristic: with the increasing of lateral pressure coefficient, the range of plastic zone and deformation decrease gradually at side, while they increase at roof and floor, and the location of the maximum value of support and surrounding rock response curve transfers from side to roof. Based on the analytical results and engineering practice, an optimization method of support design was proposed for the circular opening under nonuniform pressure.

scholarly journals Stability of a Rock Tunnel Passing through Talus-Like Formations: A Case Study in Southwestern China

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Shaoqiang Zhang ◽  
Wenqiang Li ◽  
Jiashan Tan ◽  
Bokuan Li ◽  
Xiaochang Li ◽  
...  
Keyword(s):  
Rock Mass ◽  
Rock Pressure ◽  
Monitoring Program ◽  
Surrounding Rock ◽  
In Situ Monitoring ◽  
Monitoring Data ◽  
Surrounding Rock Pressure ◽  
Set Up ◽  
Highway Project

Tayi tunnel is one of the component tunnels in the Jian-Ge-Yuan Highway Project located in Yunnan Province, southeast of China. It mainly passes through talus-like formations comprised of rock blocks of diverse sizes and weak interlayers with clayey soils with different fractions. Such a special composition leads to the loose and fractured structure of talus-like formations, which is highly sensitive to the excavation perturbation. Therefore, Tayi tunnel has become the controlled pot of the whole highway project as the construction speed has to be slowed down to reduce the deformation of surrounding talus-like rock mass. To better understand the tunnel-induced ground response and the interaction between the surrounding rock mass and tunnel lining, a comprehensive in situ monitoring program was set up. The in situ monitoring contents included the surrounding rock pressure on the primary lining, the primary lining deformation, and the stress of steel arches. Based on the monitoring data, the temporal and the long-term spatial characteristics of mechanical behavior of surrounding rock mass and lining structure due to the excavation process were analyzed and discussed. It is found that the excavation of lower benches released the surrounding rock pressure around upper benches, resulting in the decrease of the surrounding rock pressure on the primary lining and the stress of steel arches. In addition, the monitoring data revealed that the primary lining sustained bias pressure from the surrounding rock mass, which thereby caused unsymmetrical deformation of the primary lining, in accordance with the monitored displacement data. A dynamically adaptive support system was implemented to strengthen the bearing capacity of the lining system especially in the region of an extremely weak rock mass. After such treatment, the deformation of the primary lining has been well controlled and the construction speed has been considerably enhanced.

Mechanical Properties of Pyrolytic "SiOCN" Thin Coatings

1993 ◽  
Vol 308 ◽  
Author(s):  
Sandrine Bec ◽  
André Tonck ◽  
Jean-Luc Loubet
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Ceramic Coatings ◽  
Optical Observation ◽  
Thin Coatings ◽  
Polymer Precursors ◽  
Polymeric State

ABSTRACTPyrolysis of polymer precursors (polysilazane) is a technologically and economically interesting way to produce thin ceramic coatings. However, many cracks appear and decohesion occurs during pyrolysis when the ceramic coatings (SiOCN) are thicker than 0.5 micrometers. In order to understand these cracking phenomena, the coatings are mechanically characterized by nanoindentation at different stages of the pyrolysis heat treatment.During pyrolysis, the cracking temperature is detected by in-situ optical observation. The thickness of the coatings varies during pyrolysis from 3 micrometers at the polymeric state to 1 micrometer at the ceramic state. The coatings' properties, hardness and Young's modulus are evaluated after heat treatment, taking into account the substrate's influence. A large variation of these properties occurs at the cracking temperature. Both the hardness and the Young's modulus are multiplied by a factor of 10. By analysing these results, we show that cracking is correlated with the evolution of the coatings' mechanical properties during the transformation.

scholarly journals Young’s Modulus of Polycrystalline Titania Microspheres Determined by In Situ Nanoindentation and Finite Element Modeling

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Peida Hao ◽  
Yanping Liu ◽  
Yuanming Du ◽  
Yuefei Zhang
Keyword(s):  
Finite Element ◽  
Finite Element Simulation ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Deformation Mechanisms ◽  
Displacement Curve ◽  
Element Simulation ◽  
Nanoindentation Experiment ◽  
Force Displacement

In situ nanoindentation was employed to probe the mechanical properties of individual polycrystalline titania (TiO2) microspheres. The force-displacement curves captured by a hybrid scanning electron microscope/scanning probe microscope (SEM/SPM) system were analyzed based on Hertz’s theory of contact mechanics. However, the deformation mechanisms of the nano/microspheres in the nanoindentation tests are not very clear. Finite element simulation was employed to investigate the deformation of spheres at the nanoscale under the pressure of an AFM tip. Then a revised method for the calculation of Young’s modulus of the microspheres was presented based on the deformation mechanisms of the spheres and Hertz’s theory. Meanwhile, a new force-displacement curve was reproduced by finite element simulation with the new calculation, and it was compared with the curve obtained by the nanoindentation experiment. The results of the comparison show that utilization of this revised model produces more accurate results. The calculated results showed that Young’s modulus of a polycrystalline TiO2microsphere was approximately 30% larger than that of the bulk counterpart.

Judgement Method for Surrounding Rock Stability of Guanjiao Tunnel Based on Catastrophe Theory

2011 ◽  
Vol 90-93 ◽  
pp. 2307-2312 ◽  
Author(s):  
Wen Jiang Li ◽  
Su Min Zhang ◽  
Xian Min Han
Keyword(s):  
Plastic Strain ◽  
Catastrophe Theory ◽  
Soft Rock ◽  
Surrounding Rock ◽  
In Situ Monitoring ◽  
Engineering Practice ◽  
Stability Of Surrounding Rock ◽  
The Stability ◽  
Rock Tunnel

The stability judgement of surrounding rock is one of the key jobs in tunnel engineering. Taking the Erlongdong fault bundle section of Guanjiao Tunnel as the background, the stability of surrounding rock during construction of soft rock tunnel was discussed preliminarily. Based on plastic strain catastrophe theory, and combining numerical results and in-situ data, the limit displacements for stability of surrounding rock were analyzed and obtained corresponding to the in-situ monitoring technology. It shows that the limit displacements obtained corresponds to engineering practice primarily. The plastic strain catastrophe theory under unloading condition provides new thought for ground stability of deep soft rock tunnel and can be good guidance and valuable reference to construction decision making and deformation managing of similar tunnels.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

scholarly journals Stability Assessment of Landslides in Dahuaqiao Reservoir Area Based on Back Analysis of Slope Monitoring

2019 ◽  
Vol 2019 ◽  
pp. 1-15
Author(s):  
Yu-xiao Wang ◽  
Yu-jie Wang ◽  
Long Jiang ◽  
Ping Sun ◽  
Xingchao Lin ◽  
...  
Keyword(s):  
Back Analysis ◽  
In Situ Monitoring ◽  
Hydropower Project ◽  
Slope Failures ◽  
Reservoir Water ◽  
Reservoir Water Level ◽  
Reservoir Area ◽  
Reservoir Impoundment ◽  
Slope Instabilities

Dahuaqiao Hydropower Station is the sixth cascade hydropower project on the upper stream of the Lancang River, and a number of slope instabilities were found in the reservoir area before reservoir impoundment. The reservoir impoundment and fluctuation of the reservoir water level generally reactivate these potential slope failures or trigger new ones. Therefore, how to cope with the influence of these slope failures on dam safety has always been the focus of attention. However, it is unwise to stabilize all these potentially instable slopes by remedial measures. Based on a two-parameter and four-level back analysis method proposed in this paper, reasonable measures for landslide management are suggested on the basis of the in situ monitoring results and back analysis of geomaterial strength parameters.

Sign in / Sign up

Export Citation Format

Share Document