The Effect of Curing Time on Compressive Strength of Composite Cement Concrete

2012 ◽  
Vol 204-208 ◽  
pp. 4105-4109 ◽  
Author(s):  
Md. Alhaz Uddin ◽  
Mohammed Jameel ◽  
Habibur Rahman Sobuz ◽  
Noor Md. Sadiqul Hasan ◽  
Md. Shahinul Islam ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Cement Content ◽  
Pozzolanic Reaction ◽  
Strength Development ◽  
Ambient Conditions ◽  
Cement Concrete ◽  
Composite Cement ◽  
Compressive Strength Development ◽  
Curing Condition

The effect of curing condition of five different composition of Portland composite cement (PCC) and ordinary Portland cement (OPC) were investigated in this study. Compressive strength development of five different concrete types has been investigated in terms of cement content and curing duration. From the experimental observation, it is found that the early age strength of concrete made with PCC is lower than that of concrete made with OPC due to the presence of fly ash in PCC which is responsible for the pozzolanic reaction. The continued pozzolanic activity of fly ash contributes to increase strength gain at later ages at continued curing condition. It is also found that drying ambient conditions reduction of the strength potential of concrete made with PCC because the secondary (pozzolanic) reaction fails to contribute to the development of strength.

scholarly journals Compressive Strength Development of High-Volume Fly Ash Ultra-High-Performance Concrete under Heat Curing Condition with Time

2020 ◽  
Vol 10 (20) ◽  
pp. 7107
Author(s):  
Pham Sy Dong ◽  
Nguyen Van Tuan ◽  
Le Trung Thanh ◽  
Nguyen Cong Thang ◽  
Viet Hung Cu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Strength Development ◽  
Ultra High Performance Concrete ◽  
Heat Curing ◽  
Compressive Strength Development ◽  
Curing Condition

This research investigated the effect of fly ash content on the compressive strength development of ultra-high-performance concrete (UHPC) at different curing conditions, i.e., the standard curing condition and the heat curing. A total of 20 mixtures were prepared to cast specimens to measure the compressive strength at different ages from 3 days to 180 days. Additionally, 300 specimens were prepared to estimate the appropriate heat curing period at the early ages in terms of enhancing the 28-day compressive strength of UHPC with high content of fly ash (FA). From the regression analysis using test data, empirical equations were formulated to assess the compressive strength development of UHPC considering the FA content and maturity function. Test results revealed that the preference of the addition of FA for enhancing the compressive strength of UHPC requires the early heat curing procedure which can be recommended as at least 2 days under 90 °C. Moreover, the compressive strength of UHPC with FA under heat curing mostly reached its 28-day strength within 3 days. The proposed models based on the fib 2010 model can be a useful tool to reliably assess the compressive strength development of UHPC with high-volume fly ash (HVFA) (up to 70% fly ash content) under a heat curing condition that possesses a different performance from that of normal- and high-strength concrete. When 50% of the cement content was replaced by FA, the embodied CO2 emission for UHPC mixture reduced up to approximately 50%, which is comparable to the CO2 emission calculated from the conventional normal-strength concrete.

Model for compressive strength development of OPC concrete and fly ash concrete with time

2018 ◽  
Vol 70 (11) ◽  
pp. 541-557 ◽  
Author(s):  
Gollapalli S. Vijaya Bhaskara ◽  
Kanchi Balaji Rao ◽  
Madambikkattil B. Anoop
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Strength Development ◽  
Fly Ash Concrete ◽  
Compressive Strength Development

scholarly journals Influence of Mechanical and Mineralogical Activation of Biomass Fly Ash on the Compressive Strength Development of Cement Mortars

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6654
Author(s):  
Jakub Popławski ◽  
Małgorzata Lelusz
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Cement Mortar ◽  
Setting Time ◽  
Green Energy ◽  
Biomass Combustion ◽  
Strength Development ◽  
Compressive Strength Development ◽  
Biomass Fly Ash

Biomass combustion is a significant new source of green energy in the European Union. The adequate utilization of byproducts created during that process is a growing challenge for the energy industry. Biomass fly ash could be used in cement composite production after appropriate activation of that material. This study had been conducted to assess the usefulness of mechanical and physical activation methods (grinding and sieving), as well as activation through the addition of active silica in the form of silica fume, as potential methods with which to activate biomass fly ash. Setting time, compressive strength, water absorption and bulk density tests were performed on fresh and hardened mortar. While all activation methods influenced the compressive strength development of cement mortar with fly ash, sieving of the biomass fly ash enhanced the early compressive strength of cement mortar. The use of active silica in the form of silica fume ensured higher compressive strength results than those of control specimens throughout the entire measurement period.

scholarly journals Strength development of cement-treated sand using different cement types cured at different temperatures

2018 ◽  
Vol 195 ◽  
pp. 01006
Author(s):  
Lanh Si Ho ◽  
Kenichiro Nakarai ◽  
Kenta Eguchi ◽  
Takashi Sasaki ◽  
Minoru Morioka
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cement Content ◽  
Bound Water ◽  
Pozzolanic Reaction ◽  
Strength Development ◽  
Different Temperatures ◽  
Early Strength

This study aimed to investigate the strength development of cement-treated sand using different cement types: ordinary Portland cement (OPC), high early strength Portland cement (HPC), and moderate heat Portland cement (MPC) cured at different temperatures. The cementtreated sand specimens were prepared with 8% of cement content and cured under sealed conditions at 20οC and 40οC, and mortar specimens were also prepared for reference. The results showed that the compressive strength of cement-treated sand increased in order of MPC, OPC, and HPC under high curing temperatures. It was interesting that the compressive strength of the specimens using HPC was much larger than that of the specimen using OPC and MPC under 20οC due to the larger amount of chemically bound water. Additionally, it was revealed that under high curing temperatures, the pozzolanic reaction was accelerated in the cement-treated sand; this may be caused by the high proportions of sand in the mixtures.

Sign in / Sign up

Export Citation Format

Share Document