Effect of Mean Wind Speed Variations on Power Generation of Wind Farm

2012 ◽  
Vol 215-216 ◽  
pp. 1298-1307
Author(s):  
Chen Guo ◽  
Yan He

Through two methods, wind speed data sets sequence, the elements of which increased in Mean Wind Speed (MWS) orderly, are introduced first, and a numerical integration method depending on Weibull fitting result and power curve data to calculate Power Generation (PG) is proposed in this paper. Then, with measured data of 3 wind farms, PG with different heights are calculated and contrastive studies are made, employing the proposed data sets processing and PG calculating methods. Research results indicate that the PG calculating method has high reliability, and Equivalent Available Duration (EAD) increases about 50-60h when MWS increased by 0.1m/s. The results provide important basis for studies on the relationship of PG variation and measured data correction methods.

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.


2018 ◽  
Author(s):  
Joseph C. Y. Lee ◽  
M. Jason Fields ◽  
Julie K. Lundquist

Abstract. Because wind resources vary from year to year, the inter-monthly and inter-annual variability (IAV) of wind speed is a key component of the overall uncertainty in the wind resource assessment process thereby causing challenges to wind-farm operators and owners. We present a critical assessment of several common approaches for calculating variability by applying each of the methods to the same 37-year monthly wind-speed and energy-production time series to highlight the differences between these methods. We then assess the accuracy of the variability calculations by correlating the wind-speed variability estimates to the variabilities of actual wind-farm energy production. We recommend the Robust Coefficient of Variation (RCoV) for systematically estimating variability, and we underscore its advantages as well as the importance of using a statistically robust and resistant method. Using normalized spread metrics, including RCoV, high variability of monthly mean wind speeds at a location effectively denotes strong fluctuations of monthly total energy generations, and vice versa. Meanwhile, the wind-speed IAVs computed with annual-mean data fail to adequately represent energy-production IAVs of wind farms. Finally, we find that estimates of energy-generation variability require 10 ± 3 years of monthly mean wind-speed records to achieve 90 % statistical confidence. This paper also provides guidance on the spatial distribution of wind-speed RCoV.


Author(s):  
Meharkumar Barapati ◽  
Jiun-Jih Miau ◽  
Pei-Chi Chang

Taiwan developing offshore wind power to promote green energy and self-electricity production. In this study, a Light Detection and Ranging (Lidar) was set up at Chang-Hua development zone one on the sea and 10km away from the seashore. At Lidar location, WRF (3.33km & 2km grid lengths) model and WAsP were used to simulate the wind speed at various elevations. Three days mean wind speed of simulated results were compared with Lidar data. From the four wind data sets, developed five different comparisons to find an error% and R-Squared values. Comparison between WAsP and Floating Lidar was shown good consistency. Lukang meteorological station 10 years wind observations at 5m height were used for wind farm energy predictions. The yearly variation of energy predictions of traditional and TGC wind farm layouts are compared under purely neutral and stable condition. The one-year cycle average surface heat flux over the Taiwan Strait is negative (-72.5 (W/m2) and 157.13 STD), which represents stable condition. At stable condition TGC (92.39%) and 600(92.44%), wind farms were shown higher efficiency. The Fuhai met mast wind data was used to estimate roughness length and power law exponent. The average roughness lengths are very small and unstable atmosphere.


2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Weiyang Tong ◽  
Souma Chowdhury ◽  
Ali Mehmani ◽  
Achille Messac ◽  
Jie Zhang

In conventional wind farm design and optimization, analytical wake models are generally used to estimate the wake-induced power losses. Different wake models often yield significantly dissimilar estimates of wake velocity deficit and wake width. In this context, the wake behavior, as well as the subsequent wind farm power generation, can be expressed as functions of a series of key factors. A quantitative understanding of the relative impact of each of these key factors, particularly under the application of different wake models, is paramount to reliable quantification of wind farm power generation. Such an understanding is however not readily evident in the current state of the art in wind farm design. To fill this important gap, this paper develops a comprehensive sensitivity analysis (SA) of wind farm performance with respect to the key natural and design factors. Specifically, the sensitivities of the estimated wind farm power generation and maximum farm output potential are investigated with respect to the following key factors: (i) incoming wind speed, (ii) ambient turbulence, (iii) land area per MW installed, (iv) land aspect ratio, and (v) nameplate capacity. The extended Fourier amplitude sensitivity test (e-FAST), which helpfully provides a measure of both first-order and total-order sensitivity indices, is used for this purpose. The impact of using four different analytical wake models (i.e., Jensen, Frandsen, Larsen, and Ishihara models) on the wind farm SA is also explored. By applying this new SA framework, it was observed that, when the incoming wind speed is below the turbine rated speed, the impact of incoming wind speed on the wind farm power generation is dominant, irrespective of the choice of wake models. Interestingly, for array-like wind farms, the relative importance of each input parameter was found to vary significantly with the choice of wake models, i.e., appreciable differences in the sensitivity indices (of up to 70%) were observed across the different wake models. In contrast, for optimized wind farm layouts, the choice of wake models was observed to have marginal impact on the sensitivity indices.


2014 ◽  
Vol 543-547 ◽  
pp. 647-652
Author(s):  
Ye Zhou Hu ◽  
Lin Zhang ◽  
Pai Liu ◽  
Xin Yuan Liu ◽  
Ming Zhou

Large scale wind power penetration has a significant impact on the reliability of the electric generation systems. A wind farm consists of a large number of wind turbine generators (WTGs). A major difficulty in modeling wind farms is that the WTG not have an independent capacity distribution due to the dependence of the individual turbine output on the same energy source, the wind. In this paper, a model of the wind farm output power considering multi-wake effects is established according to the probability distribution of the wind speed and the characteristic of the wind generator output power: based on the simple Jenson wake effect model, the wake effect with wind speed sheer model and the detail wake effect model with the detail shade areas of the upstream wind turbines are discussed respectively. Compared to the individual wake effect model, this model takes the wind farm as a whole and considers the multi-wakes effect on the same unit. As a result the loss of the velocity inside the wind farm is considered more exactly. Furthermore, considering the features of sequentially and self-correlation of wind speed, an auto-regressive and moving average (ARMA) model for wind speed is built up. Also the reliability model of wind farm is built when the output characteristics of wind power generation units, correlation of wind speeds among different wind farms, outage model of wind power generation units, wake effect of wind farm and air temperature are considered. Simulation results validate the effectiveness of the proposed models. These models can be used to research the reliability of power grid containing wind farms, wind farm capacity credit as well as the interconnection among wind farms


2018 ◽  
Vol 3 (2) ◽  
pp. 845-868 ◽  
Author(s):  
Joseph C. Y. Lee ◽  
M. Jason Fields ◽  
Julie K. Lundquist

Abstract. Because wind resources vary from year to year, the intermonthly and interannual variability (IAV) of wind speed is a key component of the overall uncertainty in the wind resource assessment process, thereby creating challenges for wind farm operators and owners. We present a critical assessment of several common approaches for calculating variability by applying each of the methods to the same 37-year monthly wind-speed and energy-production time series to highlight the differences between these methods. We then assess the accuracy of the variability calculations by correlating the wind-speed variability estimates to the variabilities of actual wind farm energy production. We recommend the robust coefficient of variation (RCoV) for systematically estimating variability, and we underscore its advantages as well as the importance of using a statistically robust and resistant method. Using normalized spread metrics, including RCoV, high variability of monthly mean wind speeds at a location effectively denotes strong fluctuations of monthly total energy generation, and vice versa. Meanwhile, the wind-speed IAVs computed with annual-mean data fail to adequately represent energy-production IAVs of wind farms. Finally, we find that estimates of energy-generation variability require 10±3 years of monthly mean wind-speed records to achieve a 90 % statistical confidence. This paper also provides guidance on the spatial distribution of wind-speed RCoV.


2019 ◽  
Vol 21 (2) ◽  
pp. 745-754
Author(s):  
Otávio Augusto de Oliveira Lima Barra ◽  
Fábio Perdigão Vasconcelos ◽  
Danilo Vieira dos Santos ◽  
Adely Pereira Silveira

O Brasil é um país com uma extensa linha de costa, são cerca de 7.367 km de extensão do seu litoral, com um potencial natural para a geração de energia eólica. O estado do Ceará é um dos maiores produtores de energia eólica para o país, obtendo notoriedade e a necessidade de manutenção dos seus parques eólicos, especialmente se instalados em zonas de costa, onde há uma grande dinâmica natural. O presente trabalho, busca o acompanhamento das dinâmicas morfológicas na praia de Volta do Rio, localizada em Acaraú/CE, que fica a cerca de 238 km de Fortaleza/CE. Os dados coletados em idas à campo, constataram que há um forte processo erosivo atuante na praia de Volta do Rio, o que alerta para a contenção do avanço marinho sob o parque eólico presente no local. A erosão é um fenômeno natural que trabalha na modelação de demasiadas formas terrestres. No litoral, isso não é diferente, por ser um ambiente altamente dinâmico onde há a interação entre continente, atmosfera e oceano, sendo possível encontrar diversos atuantes que podem intensificar os processos erosivos, sejam eles o vento, maré, ou por intervenções humanas, como construções e ocupações indevidas ao longo da linha de costa.Palavras Chave: Volta do Rio; Energia Eólica; Erosão. ABSTRACTBrazil is a country with an extensive coastline, about 7,367 km of coastline, with a natural potential for wind power generation. The state of Ceará is one of the largest producers of wind energy for the country, obtaining notoriety and required maintenance of its wind farms, especially if located in coastal areas, where there is a great natural dynamic. The present work seeks the movement of morphological dynamics in the beach of Volta do Rio, located in Acaraú/CE, which is about 238 km from Fortaleza/CE. The data collected in the field found that there is a strong erosive process on the Beach of Volta do Rio, which warns about the expansion of advanced marine on the wind farm present on site. Erosion is a natural phenomenon that works in the modeling of many hearth forms. On the coast, this is not different, considering a highly dynamic environment in which there is an interaction between continent, atmosphere and ocean, being possible to find many factors that can intensify the erosive processes, such as wind, tide, or human intervention, as constructions and improper occupations along the coast line.Key words: Volta do Rio; Wind Energy; Erosion. RESUMENBrasil es un país con una extensa costa, cerca de 7.367 km de costa, con un potencial natural para la generación de energía eólica. El estado del Ceará es uno de los mayores productores de energía eólica del país, ganando notoriedad y la necesidad de mantener sus parques eólicos, especialmente si está instalado en zonas costeras, donde existe una gran dinámica natural. La presente investigación tiene como objetivo monitorear la dinámica morfológica en la playa de Vuelta del Rio, ubicada en Acaraú / CE, que está a unos 238 km de Fortaleza / CE. Los datos recopilados en los viajes de campo, encontraron que hay un fuerte proceso erosivo en la playa de Vuelta del Rio, que advierte sobre la contención del avance marino bajo el parque eólico presente en el sitio. La erosión es un fenómeno natural que funciona en el modelado de muchas formas terrestres. En la costa, esto no es diferente, ya que es un entorno altamente dinámico donde existe la interacción entre el continente, la atmósfera y el océano, permitiendo encontrar varios actores que pueden intensificar los procesos erosivos, ya sea viento, marea o intervenciones humanas, como edificios y ocupaciones inadecuadas a lo largo de la costa.Palabras clave: Vuelta del Río; Energía Eólica; Erosión.


2020 ◽  
Vol 12 (6) ◽  
pp. 2467 ◽  
Author(s):  
Fei Zhao ◽  
Yihan Gao ◽  
Tengyuan Wang ◽  
Jinsha Yuan ◽  
Xiaoxia Gao

To study the wake development characteristics of wind farms in complex terrains, two different types of Light Detection and Ranging (LiDAR) were used to conduct the field measurements in a mountain wind farm in Hebei Province, China. Under two different incoming wake conditions, the influence of wind shear, terrain and incoming wind characteristics on the development trend of wake was analyzed. The results showed that the existence of wind shear effect causes asymmetric distribution of wind speed in the wake region. The relief of the terrain behind the turbine indicated a subsidence of the wake centerline, which had a linear relationship with the topography altitudes. The wake recovery rates were calculated, which comprehensively validated the conclusion that the wake recovery rate is determined by both the incoming wind turbulence intensity in the wake and the magnitude of the wind speed.


Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.


2019 ◽  
Vol 119 (3) ◽  
pp. 521-546 ◽  
Author(s):  
Lingcheng Kong ◽  
Ling Liang ◽  
Jianhong Xu ◽  
Weisi Zhang ◽  
Weijun Zhu

Purpose Although the wind power industry has been booming in China during the last decade, the development of wind turbine aftermarket service is still lagging behind, which seriously affects the operational efficiency of wind farms. If wind turbine manufacturers get involved in the aftermarket, the service pricing policy will impact the profits of both the manufacturer and the wind farm. Therefore, it is necessary to discuss an optimal service pricing strategy in the wind turbine aftermarket and design a method to improve electricity generation efficiency through service contract design. The paper aims to discuss these issues. Design/methodology/approach In order to decide the maintenance quantity and channel effort level, the authors design a normal Stackelberg game and an efficiency value-added revenue-sharing contract and discuss two kinds of revenue increment sharing models under situations, in which the supply chain’s leaders are the wind farm and the wind turbine manufacturer, respectively. Findings The results show that in either case, there exist optimal power generation revenue-sharing ratios that can maximize profit. At the same time, the authors outline an optimal service pricing policy, maintenance demand policy and channel service effort-level policy. The results summarize the influences of wind aftermarket services on wind farms’ and wind turbine manufacturers’ profit, which provides managerial insights into the process of manufacturing servitization. Practical implications The manufacturer’s channel effort level will influence the power generation increments very much, so the authors have developed a mechanism to stimulate the manufacturer improving the efficiency of aftermarket services. Originality/value Taking the power generation increment revenue as the profit increment function, the authors discuss the influence of service price on the profit increment of the wind farm and the wind turbine manufacturer and also consider the influence of service price on the wind farms maintenance quantity and wind turbine manufacturers channel effort level.


Sign in / Sign up

Export Citation Format

Share Document