Study on the Ductility of T-Shaped Short-Limb Shear Walls (I)

2012 ◽  
Vol 238 ◽  
pp. 631-634
Author(s):  
Di Guo ◽  
Hua Feng ◽  
Zhi Peng Li ◽  
Jie Yu Liu
Keyword(s):  
Cyclic Load ◽  
Failure Modes ◽  
Shear Walls ◽  
Load Force ◽  
Horizontal Load ◽  
Plasticity Model ◽  
Finite Element Software ◽  
Short Limb ◽  
Ductility Characteristic ◽  
Proper Unit

In this paper, the author takes on the experiment of low cyclic load and analyzes the tenacity and ductility characteristic of the specimen, and simulates the elastic-plastic failure modes of T-shaped short-limb shear walls by using the finite element software ABAQUS and applying the damage plasticity model to select the proper unit type. Results indicate that the mechanical behavior of T-shaped short-limb shear walls under the condition of horizontal load force may be accurately simulated by the method proposed in this paper.

Experimental Study of Shear-Critical Reinforced-Concrete Shear Walls under Tension-Bending Shear-Combined Cyclic Load

2020 ◽  
Vol 146 (5) ◽  
pp. 04020047
Author(s):  
Xin Nie ◽  
Jia-Ji Wang ◽  
Mu-Xuan Tao ◽  
Jian-Sheng Fan ◽  
Y. L. Mo ◽  
...  
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Cyclic Load ◽  
Shear Walls

Self-monitoring Properties of Concrete Columns with Embedded Cement-based Strain Sensors

2011 ◽  
Vol 22 (2) ◽  
pp. 191-200 ◽  
Author(s):  
Huigang Xiao ◽  
Hui Li ◽  
Jinping Ou
Keyword(s):  
Cyclic Load ◽  
Failure Modes ◽  
Concrete Structures ◽  
Concrete Columns ◽  
Strain Sensors ◽  
Strain Sensing ◽  
Self Monitoring ◽  
Good Strain ◽  
Displacement Transducers ◽  
Monotonic Load

Cement-based strain sensors (CBCC sensor) were fabricated by taking the advantage of piezoresistivity of CB-filled CBCC. CBCC sensors were centrally embedded into concrete columns (made with C40 and C80 concretes, respectively) to monitor the strain of the columns under cyclic load and monotonic load by measuring the resistance of CBCC sensors. The comparison between the monitored results of CBCC sensors and that of traditional displacement transducers indicates that CBCC sensors have good strain-sensing abilities. Meanwhile, CBCC sensors exhibit different failure modes that break later than C40 concrete columns, but a little earlier than C80 concrete columns. Therefore, the strength-matching principle between embedded CBCC sensors and concrete columns is proposed in this article to guarantee the sensing capacity of CBCC sensors in various concrete structures. The analytical results agree well with the experimental phenomena.

scholarly journals Experimental Study on the Cyclic Performance of Reinforced Concrete Shear Walls Exposed to Fire

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Eunmi Ryu ◽  
Heesun Kim ◽  
Yeongsoo Shin
Keyword(s):  
Temperature Distribution ◽  
Aspect Ratio ◽  
Failure Mode ◽  
Failure Modes ◽  
Shear Walls ◽  
Lateral Loads ◽  
Cyclic Performance ◽  
Concrete Wall ◽  
Aspect Ratios ◽  
Heated Area

AbstractThe purpose of this study was to investigate the thermal and cyclic behaviors of fire-damaged walls designed with different failure modes, aspect ratios and heated areas. These cyclic behaviors include temperature distribution, maximum lateral load, stiffness, ductility, and energy dissipations, etc. Toward this goal, the concrete wall specimens were exposed to heat following an ISO 834 standard time–temperature curve and the cyclic loading was applied to the fire-damaged walls. The test results showed that exposure to fire significantly reduced the cyclic performance of the RC walls. Especially, it was observed that heated area, designed failure mode, and aspect ratio have influences on maximum lateral loads, stiffness, and ductility of the fire-damaged walls, while almost no effects of the heated area, designed failure mode, and aspect ratio on temperature distribution and energy dissipation were found.

Machine learning-based failure mode identification of RCSPSW

2021 ◽  
Author(s):  
Dongqi Jiang ◽  
Shanquan Liu ◽  
Tao Chen ◽  
Gang Bi
Keyword(s):  
Machine Learning ◽  
Failure Mode ◽  
Failure Modes ◽  
Shear Failure ◽  
Tall Buildings ◽  
Shear Walls ◽  
Superior Performance ◽  
Ann Model ◽  
Mode Recognition ◽  
Wide Range

<p>Reinforced concrete – steel plate composite shear walls (RCSPSW) have attracted great interests in the construction of tall buildings. From the perspective of life-cycle maintenance, the failure mode recognition is critical in determining the post-earthquake recovery strategies. This paper presents a comprehensive study on a wide range of existing experimental tests and develops a unique library of 17 parameters that affects RCSPSW’s failure modes. A total of 127 specimens are compiled and three types of failure modes are considered: flexure, shear and flexure-shear failure modes. Various machine learning (ML) techniques such as decision trees, random forests (RF), <i>K</i>-nearest neighbours and artificial neural network (ANN) are adopted to identify the failure mode of RCSPSW. RF and ANN algorithm show superior performance as compared to other ML approaches. In Particular, ANN model with one hidden layer and 10 neurons is sufficient for failure mode recognition of RCSPSW.</p>

scholarly journals Tests and Analyses of Slotted-In Steel-Plate Connections in Composite Timber Shear Wall Panels

2017 ◽  
Vol 2017 ◽  
pp. 1-20
Author(s):  
Ulf Arne Girhammar ◽  
Bo Källsner
Keyword(s):  
Bearing Capacity ◽  
Failure Modes ◽  
Design Method ◽  
Shear Walls ◽  
Test Results ◽  
Horizontal Shear ◽  
Load Bearing Capacity ◽  
Wood Panel ◽  
Load Bearing ◽  
Plate Connections

The authors present an experimental and analytical study of slotted-in connections for joining walls in the Masonite flexible building (MFB) system. These connections are used for splicing wall elements and for tying down uplifting forces and resisting horizontal shear forces in stabilizing walls. The connection plates are inserted in a perimeter slot in the PlyBoard™ panel (a composite laminated wood panel) and fixed mechanically with screw fasteners. The load-bearing capacity of the slotted-in connection is determined experimentally and derived analytically for different failure modes. The test results show ductile postpeak load-slip characteristics, indicating that a plastic design method can be applied to calculate the horizontal load-bearing capacity of this type of shear walls.

Multiaxial Viscoplasticity Modelling of Power Plant Steel

2016 ◽  
Vol 701 ◽  
pp. 230-234 ◽  
Author(s):  
Abdullah Aziz Saad ◽  
Wei Sun ◽  
Abdul Latif M. Tobi
Keyword(s):  
Power Plant ◽  
Parent Material ◽  
Plasticity Model ◽  
Cyclic Testing ◽  
Data Simulation ◽  
Finite Element Software ◽  
Mechanical Fatigue ◽  
Cyclic Operation ◽  
Cyclic Temperature ◽  
Simulation Results

The thermo-mechanical fatigue (TMF) of power plant components is caused by the cyclic operation of power plant. A time-dependent plasticity model can be used to simulate the component response under cyclic thermo-mechanical loading. This paper is concerned with the modelling of thermo-mechanical behaviour of power plant steel under various loading conditions. Fully-reversed, strain-controlled tests were conducted on a parent material of P91 steel at high temperatures in order to determine material constants. A unified, Chaboche viscoplasticity model, was used to model the TMF behaviour of the steel. The multiaxial form of the Chaboche constitutive equations have been implemented in the finite element software and validated by comparing to experimental data. Simulation results have been compared with the results of anisothermal cyclic testing in order to validate the performance of the model in cyclic temperature conditions. The model’s performance under multiaxial stress conditions was investigated by testing and simulating the notched bar specimen under load-controlled conditions.

Study on the Complete Equivalent Initial Imperfection of High Formwork Supporting Frame with Pulley-Clip Style

2011 ◽  
Vol 368-373 ◽  
pp. 3052-3056
Author(s):  
Wei Jun Yang ◽  
Yong Da Yang
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Initial Imperfection ◽  
Influential Factors ◽  
Horizontal Load ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Finite Element Software ◽  
Supporting Frame

New full hall scaffolds with pulley-clip style formwork support system is adopted in the concert hall of Changsha. This paper presents the concept of the complete equivalent initial imperfection according to the characteristics of too many influential factors on the high formwork supporting frame，then makes the complete equivalent initial imperfectione equivalent to assumed equivalent horizontal load in order to ensure the safety of the frame. At the same time, it gets a three-dimensional model by the general finite element software ANSYS 10.0. Based on the results of experiment and finite element analysis, it gets the recommended value of assumed equivalent horizontal load. The study on the high formwork supporting frame with pulley-clip style provides some reference for other similar projects.

Finite Element Analysis of X-Cor Sandwich's Compressive Strength

2011 ◽  
Vol 306-307 ◽  
pp. 733-737
Author(s):  
Xu Dan Dang ◽  
Xin Li Wang ◽  
Hong Song Zhang ◽  
Jun Xiao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Compressive Strength ◽  
Failure Modes ◽  
Failure Mechanisms ◽  
Element Model ◽  
Failure Criteria ◽  
Stiffness Degradation ◽  
Element Analysis ◽  
Finite Element Software

In this article the finite element software was used to analyse the values for compressive strength of X-cor sandwich. During the analysis, the failure criteria and materials stiffness degradation rules of failure mechanisms were proposed. The failure processes and failure modes were also clarified. In the finite element model we used the distributions of failure elements to simulate the failure processes. Meanwhile the failure mechanisms of X-cor sandwich were explained. The finite element analysis indicates that the resin regions of Z-pin tips fail firstly and the Z-pins fail secondly. The dominant failure mode is the Z-pin elastic buckling and the propagation paths of failure elements are dispersive. Through contrast the finite element values and test results are consistent well and the error range is -7.6%~9.5%. Therefore the failure criteria and stiffness degradation rules are reasonable and the model can be used to predict the compressive strength of X-cor sandwich.

Sign in / Sign up

Export Citation Format

Share Document