The Preparation of CaZrO3 Coating Ultra-Fine Nickel Powders via Chemical Deposition

2012 ◽  
Vol 268-270 ◽  
pp. 7-10
Author(s):  
Rui Xu ◽  
Jin Zheng ◽  
Cui Fan ◽  
Yuan Yuan Gao
Keyword(s):  
Chemical Deposition ◽  
Chemical Precipitation ◽  
Methanol Solution ◽  
Precipitation Method ◽  
Optimum Conditions ◽  
Water Solvent ◽  
Nickel Powders ◽  
Resistance To Oxidation ◽  
Ultrafine Nickel ◽  
Fine Nickel

Aiming at flexible oxidation in the MLCC production, the surface modification of the ultrafine nickel powders has been carried out to coat Ni powders with CaZrO3 by using chemical precipitation method. CaZrO3-coated composite ultrafine nickel powders have been synthesized in methanol-water solvent by both precipitation agents solution and zirconium-calcium solution dripped into the Ni-particle-dispersed methanol solution at the meantime. Composite nickel powders obtained under the optimum conditions were characterized, It was approved that those composite nickel powders still possessed good dispersion, the resistance to oxidation and shrinkage were improved greatly.

Tuning the mechanical and dielectric properties of zinc incorporated hydroxyapatite

2020 ◽  
Vol 16 ◽  
Author(s):  
Alliya Qamar ◽  
Rehana Zia ◽  
Madeeha Riaz
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Bone Growth ◽  
Healing Process ◽  
Secondary Phase ◽  
Chemical Precipitation ◽  
Hexagonal Structure ◽  
Precipitation Method ◽  
Low Frequencies ◽  
A Minor

Background: Hydroxyapatite is similar to bone mineral in chemical composition, has good biocompatibility with host tissue and bone. Objective: This work aims to tailor the mechanical and dielectric properties of hydroxyapatite with zinc sudstitution, to improve wearability of implant and accelerate the healing process. Method: Pure and zinc incorporated hydroxyapatite Ca10(PO4)6(OH)2 samples have been successfully prepared by means of the chemical precipitation method. Results: The results showed that hydroxyapatite(Hap) having hexagonal structure was the major phase identified in all the samples. It was found that secondary phase of β-tricalcium phosphate (β-TCP) formed due to addition of Zinc resulting in biphasic structure BCP (Hap + β-TCP). A minor phase of ZnO also formed for higher concentration of Zn (Zn ≥ 2mol%) doping. It was found that the Zn incorporation to Hap enhanced both mechanical and dielectric properties without altering the bioactive properties. The microhardness increased upto 0.87 GPa for Zn concentration equal to 1.5mol%, which is comparable to the human bone ~0.3 - 0.9 GPa. The dielectric properties evaluated in the study showed that 1.5 mol% Zn doped hydroxyapatite had highest dielectric constant. Higher values of dielectric constant at low frequencies signifies its importance in healing processes and bone growth due to polarization of the material under the influence of electric field. Conclusion: Sample Z1.5 having 1.5 mol% Zn doping showed the most optimized properties suitable for bone regeneration applications.

Structural and morphological characterization of CdS nanoparticles

2020 ◽  
Vol 10 ◽  
Author(s):  
Manish Dwivedi ◽  
Vijay Tripathi ◽  
Dhruv Kumar ◽  
Dwijendra K. Gupta
Keyword(s):  
Blue Shift ◽  
Chemical Precipitation ◽  
Morphological Characterization ◽  
Precipitation Method ◽  
Cds Nanoparticles ◽  
Cubic Phase ◽  
Simple Chemical ◽  
Xrd Patterns ◽  
Average Size ◽  
Physical Tools

Aims: CdS nanoparticles are an attractive material having application in various field like as pigment in paints, biotag for bioimaging and many more optoelectronic as well as biological applications. Present study aims to synthesize and characterize the CdS nanoparticles to make it applicable in different areas Objectives: Preparation CdS nanoparticles by using simple and facile chemical methods and further physical and structural characterization using various physical tools Methods: In present work CdS nanoparticles has been synthesized by using rationally simple chemical precipitation method with some modi-fication on temperature and incubation time in existed methods. Characterizations were done by employing XRD, SEM, TEM, AFM tech-niques Results: Simple chemical method produces the CdS nanoparticles with the size about 100-200 nm in length and 5-10 nm in diameter. The SEM studies show that the CdS nanoparticles can agglomerate and form a continuous network like structure. The X-ray diffraction (XRD) measurements show the single-phase formation of CdS nanoparticles with the structure of cubic phase, and the broadening of XRD patterns indicates that the prepared samples are nanostructured. Our analysis on CdS nanoparticles by using transmission electron microscope and atomic force microscope (AFM) revealed that the nanoparticles form both spherical and nearly rod shaped with the average size applicable for biotagging. UV-Vis spectroscopic analysis reveals blue shift in the absorption peak probably caused by quantum confinement Conclusion: The observed CdS nanoparticles were appeared yellow in color. The XRD pattern of the CdS nanoparticles showed that the materials were of nanometric sized regime with a predominantly cubic phase along with the rod and round morphology. The study and char-acterization of CdS nanoparticles will bring us a new approach to understand biological problem by tagging nanoparticles with biomolecules and further suggests that the CdS nanoparticles formulate it more suitable biocompatible nanomaterial for biotagging and bioimaging

scholarly journals Impact of Iron on the Fe–Co–Ni Ternary Nanocomposites Structural and Magnetic Features Obtained via Chemical Precipitation Followed by Reduction Process for Various Magnetically Coupled Devices Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 341
Author(s):  
Tien Hiep Nguyen ◽  
Gopalu Karunakaran ◽  
Yu.V. Konyukhov ◽  
Nguyen Van Minh ◽  
D.Yu. Karpenkov ◽  
...  
Keyword(s):  
Particle Size ◽  
Magnetic Properties ◽  
Reduction Process ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Magnetic Characteristics ◽  
Reduction Temperature ◽  
Fe Content ◽  
Magnetic Features ◽  
Co Precipitation

This paper presents the synthesis of Fe–Co–Ni nanocomposites by chemical precipitation, followed by a reduction process. It was found that the influence of the chemical composition and reduction temperature greatly alters the phase formation, its structures, particle size distribution, and magnetic properties of Fe–Co–Ni nanocomposites. The initial hydroxides of Fe–Co–Ni combinations were prepared by the co-precipitation method from nitrate precursors and precipitated using alkali. The reduction process was carried out by hydrogen in the temperature range of 300–500 °C under isothermal conditions. The nanocomposites had metallic and intermetallic phases with different lattice parameter values due to the increase in Fe content. In this paper, we showed that the values of the magnetic parameters of nanocomposites can be controlled in the ranges of MS = 7.6–192.5 Am2/kg, Mr = 0.4–39.7 Am2/kg, Mr/Ms = 0.02–0.32, and HcM = 4.72–60.68 kA/m by regulating the composition and reduction temperature of the Fe–Co–Ni composites. Due to the reduction process, drastic variations in the magnetic features result from the intermetallic and metallic face formation. The variation in magnetic characteristics is guided by the reduction degree, particle size growth, and crystallinity enhancement. Moreover, the reduction of the surface spins fraction of the nanocomposites under their growth induced an increase in the saturation magnetization. This is the first report where the influence of Fe content on the Fe–Co–Ni ternary system phase content and magnetic properties was evaluated. The Fe–Co–Ni ternary nanocomposites obtained by co-precipitation, followed by the hydrogen reduction led to the formation of better magnetic materials for various magnetically coupled device applications.

scholarly journals Ionic Liquid-Assisted Synthesis of Ag3PO4 Spheres for Boosting Photodegradation Activity under Visible Light

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 788
Author(s):  
Beibei Zhang ◽  
Lu Zhang ◽  
Yulong Zhang ◽  
Chao Liu ◽  
Jiexiang Xia ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Visible Light ◽  
High Efficiency ◽  
Chemical Precipitation ◽  
Active Species ◽  
Precipitation Method ◽  
Dihydrogen Phosphate ◽  
Xrd Pattern ◽  
Simple Chemical ◽  
Visible Light Driven

In this work, a simple chemical precipitation method was employed to prepare spherical-like Ag3PO4 material (IL-Ag3PO4) with exposed {111} facet in the presence of reactive ionic liquid 1-butyl-3-methylimidazole dihydrogen phosphate ([Omim]H2PO4). The crystal structure, microstructure, optical properties, and visible-light photocatalytic performance of as-prepared materials were studied in detail. The addition of ionic liquids played a crucial role in forming spherical-like morphology of IL-Ag3PO4 sample. Compared with traditional Ag3PO4 material, the intensity ratio of {222}/{200} facets in XRD pattern of IL-Ag3PO4 was significantly enhanced, indicating the main {111} facets exposed on the surface of IL-Ag3PO4 sample. The presence of exposed {111} facet was advantageous for facilitating the charge carrier transfer and separation. The light-harvesting capacity of IL-Ag3PO4 was larger than that of Ag3PO4. The photocatalytic activity of samples was evaluated by degrading rhodamine B (RhB) and p-chlorophenol (4-CP) under visible light. The photodegradation efficiencies of IL-Ag3PO4 were 1.94 and 2.45 times higher than that of Ag3PO4 for RhB and 4-CP removal, respectively, attributing to a synergy from the exposed {111} facet and enhanced photoabsorption. Based on active species capturing experiments, holes (h+), and superoxide radical (•O2−) were the main active species for visible-light-driven RhB photodegradation. This study will provide a promising prospect for designing and synthesizing ionic liquid-assisted photocatalysts with a high efficiency.

Synthesis and Structural Characterization of Zinc and Magnesium Doped Hydroxyapatite

2012 ◽  
Vol 531-532 ◽  
pp. 250-253 ◽  
Author(s):  
Hong Quan Zhang ◽  
Ming Zhang ◽  
Lu Wei Fu ◽  
Yu Ning Cheng
Keyword(s):  
Hydrothermal Treatment ◽  
Structural Characterization ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Starting Solution ◽  
Wet Chemical ◽  
Zn Ions ◽  
Wet Chemical Precipitation ◽  
Surface Of Crystals

Zn or Mg ions doped hydroxyapatite (HA) particles were successfully developed by introducing various concentration of Zn or Mg in the starting solution using wet chemical precipitation method and followed a hydrothermal treatment. The products were identified as HA by XRD and FTIR, and the precipitated particles had a rod-like morphology. All the products for Mg and Zn ions concentration in the preparation solution less than 40 mol% were identified as HA. Substitution of Mg and Zn in HA crystal would impair the crystallization of HA and significantly reduce the length of a, c values of HA unit cell, which clearly demonstrated that Mg or Zn ions were structurally incorporated into the apatite crystals, they were not just absorbed on the surface of crystals.

Effect of Gd doping on structural, surface and optical properties of ZnS prepared by chemical precipitation method

Optik ◽  
2017 ◽  
Vol 136 ◽  
pp. 259-264 ◽  
Author(s):  
Manivannan N. ◽  
Chandar Shekar B. ◽  
Senthil Kumaran C.K. ◽  
Sathyamoorthy R.
Keyword(s):  
Optical Properties ◽  
Chemical Precipitation ◽  
Chemical Precipitation Method ◽  
Precipitation Method ◽  
Structural Surface

Synthesis and photocatalytic properties of magnetic separable and recyclable p-n heterojunction CoFe2O4/Bi12O17Cl2 photocatalyst

CrystEngComm ◽  
2021 ◽  
Author(s):  
Kexin Fang ◽  
Lei Shi ◽  
Lishuang Cui ◽  
Chunwei Shi ◽  
Weiwei Si
Keyword(s):  
Chemical Precipitation ◽  
Photocatalytic Properties ◽  
Chemical Precipitation Method ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Crystallinity

A series of CoFe2O4/Bi12O17Cl2 (CFO/Bi12O17Cl2) nanocomposites have been prepared by chemical precipitation method. The result of X-ray diffraction showed that CFO/Bi12O17Cl2 composites had high crystallinity. It was found that CoFe2O4...

Sign in / Sign up

Export Citation Format

Share Document