Influences of Mining Depths of Coal Faces in Duanwang Coal Mine on the Gas Emission Law

2013 ◽  
Vol 295-298 ◽  
pp. 2874-2878
Author(s):  
Xin Xian Zhai ◽  
Yan Wei Zhai ◽  
Shi Wei Zhang

Duanwang Coal Mine in Shanxi province, China, is located at north of Qinshui coalfield which gently inclined and thick seams have been mined. Authorized production capacity of the coal mine is 1.8Mt/a. With the increase of mining depth, the mine gas emission quantity increased. The mine became high gassy one from low gassy mine. Using field measurement and theoretical analysis methods, the following conclusion can be drawn. Gas emission quantity of coal face is directly correlated with mining depth. With the increase of mining depth, both absolute and relative gas emission quantities at coal face increased. The gradient of gas emission quantity was 0.0438-0.1338m3/t/m, the average value was 0.1062m3/t/m. These results would provide a foundation for prediction of the gas emission quantity and selection of gas control measures.

2013 ◽  
Vol 634-638 ◽  
pp. 3537-3540
Author(s):  
Xin Xian Zhai ◽  
Xiao Ju Li ◽  
Yan Wei Zhai

Duanwang Coal Mine is located at north of Qinshui coalfield in Shanxi province, China, which gently inclined and thick seams have been mined. Authorized production capacity of the coal mine is 1.8Mt/a. With the increase of mining depth, the mine gas emission quantity increased. Karst collapse columns are very developed in the minefield, and the phenomenon of abnormal gas emission always occurred at the coal face and driving gateway around the collapse columns, then the mine became high gassy one from low gassy mine. Using field measurement and theoretical analysis methods, the following conclusion can be drawn. Karst collapse columns have significant influences on gas emission of the coal face and driving gateway. Here are large amount of free form gas into and around the collapse columns, the collapse columns were disclosure while driving gateway, a large amount of the free gas into collapse column would be instantly released, which caused abnormal gas emission at driving gateway, even leading to gas density exceeding limitation by Coal Mine Safety Regulation of China. However, during mining area of the collapse columns, gas emission quantity at coal face was relatively smaller.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yalong Li ◽  
Mohanad Ahmed Almalki ◽  
Cheng Li

Abstract For the comprehensive mechanised coal mining technology, the support design of the main withdrawal passage in the working face is an important link to achieve high yield and efficiency. Due to the impact of mining, the roof movement of the withdrawal passage is obvious, the displacement of the coal body will increase significantly, and it is easy to cause roof caving and serious lamination problems, and even lead to collapse accidents, which will affect the normal production of the mine. In this paper, the mining pressure development law of the main withdrawal passage support under the influence of dynamic pressure is designed, the most favourable roof failure form of the withdrawal passage is determined, and the action mechanism and applicable conditions of different mining pressure control measures are studied. The pressure appearance and stress distribution in the final mining stage of fully mechanised coal face are studied by numerical simulation. The deformation and failure characteristics and control measures of roof overburden in the last mining stage of fully mechanised coal face are analysed theoretically. Due to the fact that periodic pressure should be avoided as far as possible after the full-mechanised mining face is connected with the retracement passage, some auxiliary measures such as mining height control and forced roof blasting are put forward on this basis. The relative parameters of the main supporting forms are calculated. The main retracement of a fully mechanised working face in a coal mine channel is put forward to spread the surrounding rock grouting reinforcement, reinforcing roof, and help support and improve the bolt anchoring force, the main design retracement retracement channels in the channel near the return air along the trough for supporting reinforcing surrounding rock control optimisation measures, such as through the numerical simulation analysis, the optimisation measures for coal mine fully mechanised working face of surrounding rock is feasible. Numerical simulation results also show that the surrounding rock control of fully mechanised working face of coal mine design improvements, its main retreat channel under the roof subsidence, cribbing shrank significantly lower, and closer, to better control the deformation of surrounding rock, achieved significant effect, to ensure the safety of coal mine main retracement channel of fully mechanised working face support.


2012 ◽  
Vol 524-527 ◽  
pp. 662-667
Author(s):  
Xin Xian Zhai ◽  
Fu Lin Wang

According to the practical conditions of the island coal face in No.2 Coal Mine of Pingdingshan Coal Company Ltd., China, the strata behaviors and methane emission were monitored and their two relationships were analyzed. The results indicate that strata behavior at coal face affects its methane emission rates at coal wall and goaf,which the quantity of methane emission rate at coal face is largely increasing after main roof weighting. So through the monitor of periodic roof weighting time, larger methane emission rate at coal face can be predicted. Then the related methane control measures can be taken timely.


2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Liwen He ◽  
Yingcheng Dai ◽  
Sheng Xue ◽  
Chunshan Zheng ◽  
Baiqing Han ◽  
...  

Effective gas control is of significance for safe efficient coal mining in Haizi Coal Mine and other mines with similar geological conditions. This study concentrates on gas control theories and techniques in multiple coal seams of Haizi Coal Mine (No. 7, No. 8, No. 9, and No. 10 coal seam from top to bottom). To minimize risk of high gas emission and outburst hazard, No. 10 seam was mined first as a protective seam prior to the mining of its overlying outburst-prone No. 7, No. 8, and No. 9 seam. Four gas drainage measures were determined for gas control, including cross-measure boreholes into overlying coal seams, surface goaf wells, roof boreholes, and roof gas drainage roadway. These gas control measures, if implemented through entire coal seam extraction, would be possibly uneconomic. An investigation was undertaken to analyze effects of those four measures on gas emission, methane concentration, and gas drainage quantity in No. 2 1024 mining panel of No. 10 seam. Results indicate that the highly expensive gas drainage measure of a roof roadway has poor drainage performance and could be effectively replaced by roof boreholes. When adopting the optimized combination of gas drainage measures, drainage efficiency of No. 7 seam, No. 8 seam, and No. 9 seam could reach 58.64% and decrease gas pressure to be below 0.74 MPa. Outcomes of this study could provide beneficial guidance not only for gas drainage design optimization in Haizi Coal Mine but also for other multiple-seam mines with similar mining and geological conditions, for increasing gas drainage efficiency and guaranteeing mining safety.


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Jiazhuo Li ◽  
Penghui Guo ◽  
Heng Cui ◽  
Xiqing Hao ◽  
Lihua Tian ◽  
...  

With the reduction and depletion of shallow energy, the mining depth of coal around the world is increasing year by year, and the mining depth of some coal mines in China has reached kilometers. The main roadway near the goaf with the deep high static stress is very easy to be damaged after being disturbed by the mine earthquake. Taking the main roadway in the no. 1 mining area of Gaojiapu coal mine in Binchang mining area, Shaanxi Province, China, as the engineering background, the high-energy mine earthquake monitored by the on-site microseism is equivalently simulated through the dynamic module of FLAC3D, and the spatial-temporal rotation characteristics of the principal stress of roadway surrounding rock under the disturbance of mine earthquake are studied and analyzed and put forward corresponding prevention and control measures. Research shows early stage of mine earthquake disturbance, roadway roof is first affected, and the principal stress of the roof has the trend of deflection to the side of the goaf. In the middle stage of mine earthquake disturbance, the main body of roof principal stress deflects to the side of goaf, and the deflection range is large. In the later stage of mine earthquake disturbance, the principal stress directions in the surrounding rock reverse rotation, and the reverse rotation angle of the principal stress direction in the roof is the largest. Finally, the asymmetric distribution characteristics of principal stress rotation are verified by using the asymmetric deformation phenomenon on both sides of roadway surrounding rock. Based on the rotation characteristics of principal stress under the dual influence of mine earthquake disturbance and goaf, optimize the layout scheme and blasting parameters of blasting pressure relief holes. The transmission direction of principal stress can be changed by blasting pressure relief method; meanwhile, the transmission of principal stress can be blocked; through the comparison of microseismic activity law before and after pressure relief, pressure relief effect is good. The research results can provide a certain reference basis for coal mine roadway pressure relief and reducing disaster conditions.


2015 ◽  
Vol 2 (1) ◽  
pp. 12-22 ◽  
Author(s):  
L. Pylypenko ◽  
K. Kalatur

Heterodera schachtii Schmidt, 1871 is one of the most economically important pests of sugar beet (Beta vulgaris L.) worldwide. It is also widespread in most sugar beet growing regions in Ukraine causing serious yield reduction and decreasing sugar content of sugar beet in infested fi elds. An advanced parasitic strategy of H. schachtii is employed to support nematode growth, reproduction and harmfulness. In intensive agriculture systems the nematode control measures heavily rely on nematicides and good agricultural practice (crop rota- tion in the fi rst place). But alternative strategies based on nematode resistant sugar beet cultivars and hybrids are required as none of nematicides approved for the open fi eld application are registered in Ukraine. Here we review the achievements and problems of breeding process for H. schachtii resistance and provide the results of national traditional breeding program. Since the beginning of 1980s fi ve sugar beet cultivars (Verchnyatskyi 103, Yaltuschkivska 30, Bilotcerkivska 45, BTs-40 and Yuvileynyi) and seventeen lines partly resistant or toler- ant to H. schachtii have been obtained throughout targeted crossing and progenies assessment in the infested fi elds. The further directions for better utilization of genetic sources for nematode resistance presented in na- tional gene bank collection are emphasized. There is a need for more accurate identifi cation of resistance genes, broader application of reliable molecular markers (suitable for marker-assisted selection of nematode resistant plants in the breeding process) and methods for genetic transformation of plants. Crop cash value and national production capacity should drive the cooperation in this fi eld. Knowledge as well as germplasm exchange are thereby welcomed that can benefi t breeding progress at national and international level.


2020 ◽  
Vol 81 (6) ◽  
pp. 23-31
Author(s):  
M. I. Vasileva

The aim of the study was to investigate approaches to the formation of general educational skills. A survey examining the design and research process was carried out by 6th-grade Russian students over the course of an extracurricular project entitled «Names of Modern Professions». In the paper, the selection of the «Lexicology» section for such activities carried out by school pupils is substantiated and stages of work on the project are described. The applied methodology involves theoretical analysis of scientific literature, formative experimentation, analysis of products of educational activities, observation and description. It is concluded that the design of extracurricular research activities in the Russian language contributes to the formation of general educational competencies in conducting surveys and searching for information on the basis of subject skills.


2016 ◽  
Vol 52 ◽  
pp. 194-202
Author(s):  
S. L. Voitenko ◽  
L. V. Vishnevsky

The article shows the state of Ukrainian Whiteheaded cattle, which includes distribution of cattle, the number of animals belonging to respective bloodlines, evaluation of young animals with live weight in the process of growing and milk production of cows during the first lactation. It reflects the historic development of the breed when it was colonism whiteheaded cattle, which turned into the original breed, undergone a significant expansion in livestock and increase of productivity, decreased in the number, was as basis for creation of Ukrainian Black-and-White dairy breed and now bred only in one breeding farm. Visual estimation of animal exterior showed good development of cows and calves and their belonging to the dairy type. In the vast majority the cows of the herd have a black suit, a white head with " glasses" around the eyes, white belly, udder, lower legs and brush of the tail. The youngsters aren’t consolidated by the exterior, and among them there are animals which are not typical for Ukrainian Whiteheaded breed. The young animals have some lag in live weight behind the breed standard [12] to 7 months’ age with exceeding of this trait in certain periods quite significantly in the future. It was established that selection of heifers on live weight will be effective at the early age (1-5 months), given the coefficient of variation of live weight – 22,63-30,21% and will not have a significant influence in the future. Milk yields of first-calf heifers vary considerably depending on the origin. The milk yield of first-calf heifers in the herd was 4238,5 kg on average, the heifers belonging to Mart 171 and Ozon 417 bloodlines had the best milk performance – 4483,1 and 4254,9 kg accordingly. The most aligned milk yield during the first lactation was in the cows belonging to Ozon 417 bloodline, the limits of the trait are 4128,5-4327,4 kg with the average value by the line 4254,9 kg. In contrast, the first-calf heifers of Ryezvyi 33 bloodline with average milk yield 4048,9 kg had limits of the trait 2199,3-4736,1 kg. Even greater range in cows’ milk yield during the first lactation R= 4939 kg (limits 1687 – 6626 kg) is characterized for the herd in general, it shows, on the one hand, the possibility of qualitative improvement of cows’ productivity due to selection on the investigated trait and lack of selection in the herd on the other hand. It was established that daughters of bull Chardash belonging to Ryezvyi 33 bloodline produced 4736,1 kg of milk for 305 days of the first lactation with fat content 3,6%, whereas Zlak’s descendants of the same line were characterized by the lowest milk yield for the first completed lactation – 2199,3 kg with fat content 3,7% and the average value by the line – 4048,9 kg of milk, fat content 3,6%. Similar variability of first-calf heifers’ milk yields, depending on the origin, is typical for other bloodlines of Ukrainian Whiteheaded breed. To increase milk productivity of Ukrainian Whiteheaded cows is recommended to repeat successful combinations of parental forms, and to preserve the breed – to carry out an objective assessment of animals by a range of traits, given the efficiency of selection of heifers on live weight at early age.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3049
Author(s):  
Marek Borowski ◽  
Piotr Życzkowski ◽  
Klaudia Zwolińska ◽  
Rafał Łuczak ◽  
Zbigniew Kuczera

Increasing emissions from mining areas and a high global warming potential of methane have caused gas management to become a vital challenge. At the same time, it provides the opportunity to obtain economic benefits. In addition, the use of combined heat and power (CHP) in the case of coalbed methane combustion enables much more efficient use of this fuel. The article analyses the possibility of electricity production using gas engines fueled with methane captured from the Budryk coal mine in Poland. The basic issue concerning the energy production from coalbed methane is the continuity of supply, which is to ensure the required amount and concentration of the gas mixture for combustion. Hence, the reliability of supply for electricity production is of key importance. The analysis included the basic characterization of both the daily and annual methane capture by the mine’s methane drainage system, as well as the development of predictive models to determine electricity production based on hourly capture and time parameters. To forecast electricity production, predictive models that are based on five parameters have been adopted. Models were prepared based on three time variables, i.e., month, day, hour, and two values from the gas drainage system-capture and concentration of the methane. For this purpose, artificial neural networks with different properties were tested. The developed models have a high value of correlation coefficient. but showed deviations concerning the very low values persisting for a short time. The study shows that electricity production forecasting is possible, but it requires data on many variables that directly affect the production capacity of the system.


2011 ◽  
Vol 39 (3) ◽  
pp. 219-225 ◽  
Author(s):  
Guo Donggan ◽  
Bai Zhongke ◽  
Shangguan Tieliang ◽  
Shao Hongbo ◽  
Qiu Wen

Sign in / Sign up

Export Citation Format

Share Document