On the Nodes’ Anti-Crack and Load Bearing of SRHC Interior Joint with Different Axial Compression Ratios

2013 ◽  
Vol 351-352 ◽  
pp. 213-218
Author(s):  
Jun Peng ◽  
Dong Xiu Zhang ◽  
Jian Kang Zhang
Keyword(s):  
Energy Dissipation ◽  
Axial Compression ◽  
Compression Ratio ◽  
Stress Transfer ◽  
Ratio Test ◽  
Loading Test ◽  
Axial Compression Ratio ◽  
Foreign Countries ◽  
Load Carrying ◽  
Energy Dissipation Capacity

By testing the seismic performance of the beams and columns of three SRHC with different axial compression ratios, the paper reveals the influence pattern of the nodes’ stress transfer and distribution, cracks’ appearance and development, member deformation, destruction pattern and mechanism, energy dissipation capacity etc., in SRHC with different axial compression ratios. The test shows that the increase of axial compression ratio postpones the appearance of the diagonal cracks in the nodes area, and slows down moderately the speed of development of the diagonal cracks, and improves the nodes’ energy dissipation capacity and ductility etc. this article studies its crack resistance and bearing capacity only. The purpose of this test is, through the low cyclic loading test of the nodes in the beams and columns of three SRHC with different axial compression ratios, to investigate the axial compression ratio’ influence on the cracks’ appearance, development, destruction pattern and deformation characteristics in the nodes; to analyze of the factors influencing the load-carrying capability; to validate the calculation methods proposed by related studies, which is little studied by foreign countries. This paper, based on the analysis of axial compression ratio test, further validates and improves the theory and methods proposed in the literature.

scholarly journals Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Zhen-chao Teng ◽  
Tian-jia Zhao ◽  
Yu Liu
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Peak Load ◽  
Frame Structure ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity ◽  
Specially Shaped Column

In traditional building construction, the structural columns restrict the design of the buildings and the layout of furniture, so the use of specially shaped columns came into being. The finite element model of a reinforced concrete framework using specially shaped columns was established by using the ABAQUS software. The effects of concrete strength, reinforcement ratio, and axial compression ratio on the seismic performance of the building incorporating such columns were studied. The numerical analysis was performed for a ten-frame structure with specially shaped columns under low reversed cyclic loading. The load-displacement curve, peak load, ductility coefficient, energy dissipation capacity, and stiffness degradation curve of the specially shaped column frame were obtained using the ABAQUS finite element software. The following three results were obtained from the investigation: First, when the strength of concrete in the specially shaped column frame structure was increased, the peak load increased, while the ductility and energy dissipation capacity weakened, which accelerated the stiffness degradation of the structure. Second, when the reinforcement ratio was increased in the specially shaped column frame structure, the peak load increased and the ductility and energy dissipation capacity also increased, which increased the stiffness of the structure. Third, when the axial compression ratio was increased in the structure, the peak load increased, while ductility and energy dissipation capacity reduced, which accelerated the degradation of structural stiffness.

Experimental Study on Seismic Performance of Steel Reinforced Recycled Concrete Column

2014 ◽  
Vol 501-504 ◽  
pp. 1580-1586
Author(s):  
Jian Yang Xue ◽  
Jian Peng Lin ◽  
Hui Ma
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Recycled Concrete ◽  
Recycled Aggregate ◽  
Concrete Column ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

The pseudo-static tests were carried out on seven steel reinforced recycled concrete columns. The main parameters of specimens were recycled aggregate replacement ratio, axial compression ratio and volumetric stirrup ratio. The results indicate that the incorporation of recycled aggregate doesnt reduce the horizontal bearing capacity, ductility and the energy dissipation capacity of specimens and has little effect on seismic performance. The seismic performance of steel reinforced recycled concrete column decreases significantly in the high axial compression ratio. The ductility, horizontal bearing capacity and the energy dissipation capacity of the steel reinforced recycled concrete column increase with a rise in the volumetric stirrup ratio. This study provides a reference on the application of the steel reinforced recycled concrete column.

Study on Accumulated Ductility Coefficient of Concrete Filled Steel Tubular Columns Based on Experimental Results

2012 ◽  
Vol 166-169 ◽  
pp. 1152-1156
Author(s):  
Pei Zhen Xu ◽  
Xia Wu ◽  
Na Zhang ◽  
Hou Jian Zhang ◽  
Huan Sen Xing
Keyword(s):  
Energy Dissipation ◽  
Axial Compression ◽  
Compression Ratio ◽  
Slenderness Ratio ◽  
Steel Tube ◽  
Steel Ratio ◽  
Tubular Columns ◽  
Axial Compression Ratio ◽  
Loading System ◽  
Energy Dissipation Capacity

The hysteretic behaviors of concrete filled steel tube columns under low cyclic loads were analyzed for verification the accumulated energy dissipation performance. The accumulated ductility coefficient influencing factors, such as slenderness ratio, axial compression ratio and sectional steel ratio, were analyzed. It is indicated that these columns have a better energy dissipation capacity. The energy dissipation capacity decreases with the axial compression ratio increasing, but the influence of slenderness ratio and steel ratio to accumulated ductility coefficient is not clear, this is because the influence of difference loading system.

Effect of Axial Compression Ratio on Seismic Behavior of GFRP Reinforced Concrete Columns

2020 ◽  
Vol 20 (06) ◽  
pp. 2040004
Author(s):  
Li Sun ◽  
Zeyu Yang ◽  
Qiao Jin ◽  
Weidong Yan
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Design ◽  
Compression Ratio ◽  
Seismic Behavior ◽  
Concrete Columns ◽  
Reinforced Concrete Columns ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

Traditional reinforced concrete columns have demonstrated poor seismic performance especially in corrosive environment as the reinforcement bars experience severe corrosion under such conditions. To overcome the problem of steel corrosion, glass fiber-reinforced polymer (GFRP) reinforced concrete columns have gained significant attention in recent years. However, the seismic performance of GFRP reinforced concrete column is not well understood yet. One of the main challenges associated with the use of GFRP bars is its brittle behavior. Therefore, it is necessary to investigate the mechanical properties and failure modes of GFRP reinforced concrete structures under seismic action. In this research, the seismic behavior of GFRP reinforced concrete columns and conventional columns under different axial compression ratios are analyzed by low-cycle repeated pseudo-static loading tests. As a result, the deformation and the seismic energy dissipation capacity of GFRP reinforced concrete columns are investigated and discussed. Furthermore, the failure mechanism of GFRP bar structure is studied to provide the basis for improving the seismic design method of GFRP reinforced concrete structure and modifying the code for seismic design. In addition, the influence of axial compression ratio on the seismic behavior of full GFRP reinforced concrete columns is investigated. The results of this experiment demonstrate that with the increase of axial compression ratio, the ultimate bearing capacity of GFRP reinforced concrete columns increases, while the deformation and the cumulative energy dissipation capacity decrease.

Research on the Joint of Concrete-Filled Steel Tubular Column and Steel Beam

2013 ◽  
Vol 351-352 ◽  
pp. 174-178
Author(s):  
Ying Zi Yin ◽  
Yan Zhang
Keyword(s):  
Energy Dissipation ◽  
Failure Mechanism ◽  
Compression Ratio ◽  
Seismic Behavior ◽  
Strength Degradation ◽  
Steel Beam ◽  
Failure Characteristics ◽  
Static Test ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

With the pseudo-static test of 4 concrete-filled square steel tubular column and steel beam joint with outer stiffened ring, this paper discusses the failure characteristics, failure mechanism and seismic behavior of joints under different axial compression ratio. The analysis of the testing results shows: when reached the ultimate strength, the strength degradation and stiffness degradation of joints are slowly and the ductility is also good, the energy dissipation capacity of joints is much better.

Optimization of Large-Tonnage Lead Rubber Bearing for Highway Bridge

2011 ◽  
Vol 71-78 ◽  
pp. 3832-3836
Author(s):  
Guo Hui Zhao ◽  
Jian Hui Zhao ◽  
Xin Zhang
Keyword(s):  
Energy Dissipation ◽  
Axial Compression ◽  
Compression Ratio ◽  
Great Influence ◽  
Time History ◽  
Soil Conditions ◽  
Axial Compression Ratio ◽  
Rubber Bearing ◽  
Lead Rubber Bearing ◽  
Isolated Bridge

A 10000kN lead rubber bearing is taken as an example to study the energy dissipation mode of isolated bridge and optimal lead rate of the bearing. Bilinear spring model considering the effect of real lead rate on the stiffness is used to simulate the bearing. Optimization of the lead rate in different site soil conditions and different axial compression ratio of pier is carried on by using nonlinear dynamic time history analysis. It is shown that the axial compression ratio of pier has great influence on the energy dissipation mode of isolated bridge and the optimal lead rate of the bearing. Site soil conditions have little effect on the energy dissipation mode of the isolation bridge and the optimal lead rate when the axial compression ratio of pier is fixed.

Research on the Seismic Behavior of Concrete-Filled Steel Tubular Column and Steel Beam Joint

2012 ◽  
Vol 204-208 ◽  
pp. 2528-2532
Author(s):  
Ying Zi Yin ◽  
Yan Zhang
Keyword(s):  
Energy Dissipation ◽  
Compression Ratio ◽  
Seismic Behavior ◽  
Steel Beam ◽  
Failure Characteristics ◽  
Static Test ◽  
Axial Compression Ratio ◽  
Earthquake Action ◽  
Energy Dissipation Capacity ◽  
Strength And Stiffness

Joints are the forces cross points of members, and the bearing modes are more complex than other members, especially under earthquake action, so the rationality of joints are directly related to the safe reliability of structure. By the pseudo-static test of 4 concrete-filled square steel tubular column and steel beam joint with outer stiffened ring, this paper discusses the failure characteristics, failure mechanism and seismic behavior of joints under different axial compression ratio. The analysis of the testing results shows: the energy dissipation capacity of joints is much better, the degradation of strength and stiffness are slowly when reached the ultimate strength, and the ductility is also good.

scholarly journals The Influence of Different Parameter on the Seismic Behavior of SRUHSC Frame

2017 ◽  
Vol 2017 ◽  
pp. 1-14
Author(s):  
Yingchao Ma ◽  
Jinqing Jia
Keyword(s):  
Energy Dissipation ◽  
Failure Mode ◽  
Axial Compression ◽  
Failure Process ◽  
Hysteresis Curve ◽  
Loading Test ◽  
Skeleton Curve ◽  
Shear Span ◽  
Energy Dissipation Capacity ◽  
Seismic Behaviors

The seismic behaviors of steel reinforced ultrahigh strength concrete (SRUHSC) frames with different axial compression ratios and shear span ratios are experimentally studied through the reversed cyclic loading test of four specimens. The test results reveal that the seismic response of the frame is closely related to the failure process and failure mode of the columns. Based on the results, a systematic exploration is further conducted in terms of the characteristics of the skeleton curve, hysteresis curve, strength degradation, stiffness degradation, and energy dissipation capacity of the structure. The results indicate that as the axial compression ratio increases, and the shear span ratio decreases, the failure process of the entire structure and the weakening of the beam end are accelerated. Meanwhile, a change of the failure mode is also observed, accompanied by corresponding changes in the strength, stiffness, and energy dissipation capacity of the system.

scholarly journals Test on Hysteretic Behaviour of Prestressed Composite Joints with Concrete-Encased CFST Columns

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Kun Wang ◽  
Huihui Luo
Keyword(s):  
Energy Dissipation ◽  
Axial Compression ◽  
Compression Ratio ◽  
Failure Modes ◽  
Shear Failure ◽  
Hysteretic Behaviour ◽  
Axial Compression Ratio ◽  
Flexural Failure ◽  
Composite Joint ◽  
Cfst Columns

Four composite joint specimens consisted of concrete-encased steel beams and concrete-encased concrete-filled steel tube (CFST) columns were tested under lateral cyclic loading, in which three specimens were prestressed and the other was not. In the tests, crack distributions and failure modes of the joint specimens were acquired, and the energy dissipation, rigidity degeneration, ductility, and residential deformation were investigated. Meanwhile, the strain variation of longitudinal rebars and I-steel flanges at beam ends as well as steel tubes in panel zones were analysed. The experimental results showed that a type of mixed mode consisting of shear failure in the panel zone and flexural failure at beam ends was found for three prestressed joint specimens, whilst only flexural failure at beam ends was observed for the non-prestressed one, and all joint specimens showed good hysteretic behaviour. In addition, as can be seen from the skeleton curves, the lateral peak loads of prestressed joint specimens could be enhanced to some extent by increasing the prestressing level, and the axial compression ratio had little effect on lateral loads; meanwhile, the ductility and energy dissipation for prestressed joint specimens also could be reduced by increasing the prestressing level and axial compression ratio.

Seismic performance comparison between precast beam joints and cast-in-place beam joints

2016 ◽  
Vol 20 (9) ◽  
pp. 1299-1314 ◽  
Author(s):  
Hongtao Liu ◽  
Qiushi Yan ◽  
Xiuli Du
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Plastic Zone ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Precast Concrete ◽  
Concrete Structures ◽  
Reinforced Concrete Structures ◽  
Axial Compression Ratio

Precast reinforced concrete structures are widely used due to many constructional advantages such as faster construction speed, lower construction cost, being environmentally friendly, higher strength, and so on. To study the seismic performance of precast reinforced concrete structures, tests on beam-to-column joints of precast reinforced concrete structures were conducted under low reversed cyclic loading. In total, four joint specimens were produced in this study, including two precast joints and two cast-in-place joints. In addition to the comparison between different types of joints, the axial compression ratio of column was adopted as the main variable in this study. Analysis was carried out on the basis of the observed joint failure mode and relationships derived from the test data such as hysteresis curves, skeleton curves, stiffness degradation curves, energy dissipation capacities, and sleeve joint strain curves. Despite the closeness of energy dissipation capacity between the precast joints and the cast-in-place joints, they had different failure modes. Precast joints feature a relatively concentrated crack distribution in which the limited number of cracks was distributed throughout the plastic zone of the beam. Cast-in-place joints feature more evenly distributed cracks in the plastic zone, especially at the later stage of the loading. The steel slippage of the precast concrete joints was found influenced by the axial compression ratio. Through this study, it is concluded that seismic resistance capacity of precast concrete joint needs to be considered in design and construction and the grouting sleeve splice could be kept away from the hinge zones when precast concrete structures were used in regions of high seismicity. The results in this study can provide a theoretical basis for seismic design of precast reinforced concrete structures, which in turn can promote the application of precast reinforced concrete structures.

Sign in / Sign up

Export Citation Format

Share Document