ANSYS Simply Supported Deep Beams Based on the Study of Mechanical Properties

2013 ◽  
Vol 351-352 ◽  
pp. 782-785
Author(s):  
Yong Bing Liu ◽  
Xiao Zhong Zhang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Mechanical Model ◽  
Work Performance ◽  
Deep Beam ◽  
Analysis Software ◽  
Deep Beams ◽  
Element Analysis ◽  
Simply Supported ◽  
Force Characteristics

Established the mechanical model of simply supported deep beam, calculation and analysis of simple supported deep beams by using finite element analysis software ANSYS, simulated the force characteristics and work performance of the deep beam. Provides the reference for the design and construction of deep beams.

Automated Finite Element Analysis on Tree Branches

2016 ◽  
Author(s):  
Devon Keane ◽  
Domenick Avanzi ◽  
Lance Evans ◽  
Zahra Shahbazi
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
User Interface ◽  
Elemental Analysis ◽  
Biological Systems ◽  
Complex Geometries ◽  
Analysis Software ◽  
Element Analysis

There are many instances where creating finite element analysis (FEA) requires extensive time and effort. Such instances include finite element analysis of tree branches with complex geometries and varying mechanical properties. In this paper, we discuss the development of Immediate-TREE, a program and its associated Guided User Interface (GUI) that provides researchers a fast and efficient finite elemental analysis of tree branches. This process was discussed in which finite element analysis were automated with the use of computer generated Python files. Immediate-TREE uses tree branch’s data (geometry, mechanical properties and etc.) provided through experiment and generates Python files, which were then run in finite element analysis software (Abaqus) to complete the analysis. Immediate-TREE is approximately 240 times faster than creating the model directly in the FEA software (Abaqus). The process used to develop Immediate-TREE can be applied to other finite element analysis of biological systems such as bone and tooth.

Research on PET Beer Bottle Structural Parameters and it’s Strength

2013 ◽  
Vol 641-642 ◽  
pp. 488-491
Author(s):  
Wei Yuan ◽  
Li Hua Xie ◽  
Gai Mei Zhang ◽  
Da Zhi Liao ◽  
Jian Dong Lu
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Boundary Conditions ◽  
Internal Pressure ◽  
Structural Parameters ◽  
Analysis Software ◽  
Element Analysis ◽  
Main Factors ◽  
Different Thickness

According to the formula of the resistance to internal pressure, the main factors of the strength of the beer bottles are analyzed. Using ANSYS finite element analysis software, PET beer bottles damaged boundary conditions are determined. PET beer bottle model is established, and have the stress analysis. The internal pressure and the bottle top pressure are applied on PET beer bottles. PET beer bottles strain is analyzed in two loads with different thickness and different bottle diameter. Thickness and bottle diameter influence of the mechanical properties of PET beer bottles are obtained. It provides a method and basis of the structure to optimize the design of PET beer bottles.

Analysis on Changes of Mechanical Properties of Lining of Tunnels in Huangtu Regions Taking Account of Loess Cavity by Using ADINA

2014 ◽  
Vol 580-583 ◽  
pp. 1358-1363
Author(s):  
He Ping Zhou ◽  
En Yong Wang ◽  
Yu Xia Hu ◽  
Zhi Qiang Liu ◽  
Jian Bo Cui
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Analysis ◽  
Analysis Software ◽  
Element Analysis

In this article, we focused on changes of mechanical properties in lining of tunnel caused by loess cavity. We established a corresponding model and carried out numerical analysis by using finite element analysis software ADINA, considered the effect of different locations, different size of the cavity and depth of the tunnel. The results showed that change of the mechanical properties has the largest effect on the lining at the arch foot nearby the loess cavity, and it grows with the growth of the cavity‘s size and depth of the tunnel.

Dynamic Characteristics of the Backhoe Excavator Bucket Based on Pro/E and ANSYS

2012 ◽  
Vol 619 ◽  
pp. 30-33 ◽  
Author(s):  
Chun Hua Wang ◽  
Yang Gao ◽  
Ying Ying Zhang ◽  
Cheng Long Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Working Conditions ◽  
Work Performance ◽  
Model Simulation ◽  
Analysis Software ◽  
Element Analysis ◽  
Excavator Bucket ◽  
Theoretical Construction ◽  
Material Nonlinear

In this paper, the actual working conditions in the excavator bucket load in the mining process and foreign load has random features of Pro/E and finite element analysis software ANSYS to establish the bucket entity model, based on rock mechanics, material nonlinear analysis theoretical Construction of the soil constitutive model simulation, and the bucket of the different movement of the force, respectively bucket two main conditions the stress and displacement contours and analysis of the ultimate stress values and bucket stress characteristics is to improve the bucket force and work performance, improve safety and efficiency of the bucket work to provide a basis.

Research on Mechanical Properties and Simulation of Straw-Biodegradable Tableware

2011 ◽  
Vol 101-102 ◽  
pp. 1096-1100
Author(s):  
Quan Rong Jing ◽  
Feng Xu ◽  
De Gao
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Optimal Solution ◽  
Reference Method ◽  
Specific Load ◽  
Analysis Software ◽  
Element Analysis ◽  
The Relationship

Through the test of mechanical properties of the straw-biodegradable tableware, the relationship between performance and processing technology was analyzed and the optimal solution was obtained. And using finite element analysis software, the internal stress distribution under the specific load was obtained based on mechanical properties, more valuable reference method about tableware design was provided through studying the changing intensity.

Mechanical Properties Research of Planar K-Joint

2015 ◽  
Vol 1091 ◽  
pp. 83-87
Author(s):  
Xi Bing Hu ◽  
Fei Hua Yi ◽  
Da Long Zhang ◽  
Hui Mao
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Models ◽  
Analysis Software ◽  
Joint Region ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Rotational Deformation ◽  
Increasing Load

The finite element models of the planar K-joint are established based on the finite element analysis software ANSYS. The bracing members are under the action of axial force and moment. Different rotational deformation values of the joint with different geometric parameters are reached with calculation and analysis. Results show that the deformation value approximate linearly increased with the increasing load of the bracing member. It also shows that the influence of the bracing member diameter and wall thickness is larger on rotational deformation values and the rotational deformation of the part of the K-joint is greatly influenced by the deformation of joint region.

Finite Element Analysis of Electrical Explosion Spraying Technology

2012 ◽  
Vol 429 ◽  
pp. 72-77
Author(s):  
Yan Ni Wang ◽  
Xiao Lin Jiang ◽  
Ping Yang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
High Performance ◽  
Electrical Explosion ◽  
Substrate Material ◽  
Interface Temperature ◽  
Analysis Software ◽  
Element Analysis ◽  
Peak Voltage

In order to master the basic laws of preparation coating by electrical explosion spraying technology and obtain coating with higher mechanical properties, finite element analysis software is used to simulate temperature field in process of coated condensation. Some basic rules of process parameters are drawed. To obtain high-performance coatings, coating material whose sedimentary particle has a higher interface temperature is first considered according to the substrate material property parameters. In the process of prepare coating, voltage should be better to use peak Voltage of electric explosion spraying equipment. Self-inductance of circuit should be as low as possible.

Simulation Investigation the Effect of Heating-Lines on Tensile Mechanical Properties of Sheet Metal after Laser Scanning

2011 ◽  
Vol 314-316 ◽  
pp. 331-336 ◽  
Author(s):  
Wen Jiao Dan ◽  
Wei Gang Zhang
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Sheet Metal ◽  
Mechanical Model ◽  
Laser Scanning ◽  
Constitutive Relationship ◽  
Transformation Kinetic ◽  
Element Analysis ◽  
Relationship Of ◽  
Phase Transformation Kinetic

In this study, tensional mechanical properties of sheet metal with heating-lines after laser scanning are investigated based on the thermal-microstructure-mechanical model. The phase transformations, during laser scanning of sheet metal, are calculated by coupling the thermal history from finite element analysis with a phase transformation kinetic model. The flow stresses of material are obtained from the constitutive relationship of the phases based on the mixture strain hardening laws. The results show that the influence of the heating-lines number on tensional mechanical properties of material is obvious. The mechanical properties are related to the distribution of microstructure in heat affected zone after laser scanning.

A Numerical Analysis of Infilling-Wall Multi-Functional Vibration Reduction

2011 ◽  
Vol 291-294 ◽  
pp. 2055-2059
Author(s):  
Jun Wei Zheng ◽  
Ming Sheng He ◽  
Gui Ju Shi
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Experimental Study ◽  
Theoretical Basis ◽  
Vibration Reduction ◽  
Analysis Software ◽  
Infill Wall ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Theoretical Evidence

Based on the experimental study, this paper analyzes the stress given by series of Structured Infilling-walls reducing vibration multi-functionally in the help of the finite element analysis software, ANSYS. It is a comprehensive comparative analysis that different structures, thickness of walls, storeys, and spans are included. The conclusion is drawn that filling-wall can improve the mechanical properties of multi-functional vibration-reducing structure of infilling-wall, which provides theoretical evidence for infilling wall multi-functional vibration-reducing structure under different circumstances that the infill wall stand the proportion provides certain theoretical basis. The appropriate brittle anti-pressure pieces can be fixed according to the comparative finding which also contributes a lot to the achievement of the purpose of this project.

Structural Analysis and Design Optimization of PET Beer Bottles

2013 ◽  
Vol 312 ◽  
pp. 21-24 ◽  
Author(s):  
Wei Yuan ◽  
Li Hua Xie ◽  
Gai Mei Zhang ◽  
Da Zhi Liao ◽  
Jian Dong Lu
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Analysis ◽  
Internal Pressure ◽  
Analysis Software ◽  
Element Analysis ◽  
Analysis And Design ◽  
Main Factors ◽  
Different Thickness

According to the formula of the resistance to internal pressure, the main factors of the strength of the beer bottles are analyzed. Using ANSYS finite element analysis software, PET beer bottles damaged boundary conditions are determined. PET beer bottle model is established, and have the stress analysis. The internal pressure and the bottle top pressure are applied on PET beer bottles. PET beer bottles strain is analyzed in two loads with different thickness and different bottle diameter. Thickness and bottle diameter influence of the mechanical properties of PET beer bottles are obtained. It provides a method and basis of the structure to optimize the design of PET beer bottles.

Sign in / Sign up

Export Citation Format

Share Document