Supporting Numerical Simulation of Roadway Surrounding Rock in Deep High Stress Based on Broken-Expand Deformation

2013 ◽  
Vol 353-356 ◽  
pp. 1310-1314
Author(s):  
Wei Jian Yu ◽  
Yan Si Qu ◽  
Dai Qiang Deng
Keyword(s):  
Numerical Simulation ◽  
Large Deformation ◽  
High Stress ◽  
Stable State ◽  
Surrounding Rock ◽  
Stability Factor ◽  
Simulation And Optimization ◽  
Medium Length ◽  
Secondary Support ◽  
Primary Support

According to large deformation and supporting problem ofroadway surrounding rock under deep high stress caused by broken-expanddeformation, supporting numerical simulation and optimization on a roadway werestudied. Two primary support scheme of medium length anchor with self-drillinganchor and short pre-stressed anchor withself-drilling anchor and three secondary support scheme of 5m, 6mand 7m length cable were proposedbased on roadway engineering characteristics; Calculationparameters of support structureparameters and surrounding rock were determined based on broken-expanddeformation mechanism, and scheme were calculated respectively; Deformation, plasticzone and stable state of surrounding rock under different support were analyzedbased on results individually, and optimal support scheme were opted. Theresults showed that roadway used 5.5~6.0manchor cable as secondary support whose stability factor can be achieved 1.28could meet productive requirement.

scholarly journals Research on the Deformation Mechanism and Directional Blasting Roof Cutting Control Measures of a Deep Buried High-Stress Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xiaojie Yang ◽  
Chenkang Liu ◽  
Honglei Sun ◽  
Songlin Yue ◽  
Yuguo Ji ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
High Stress ◽  
Stable State ◽  
Surrounding Rock ◽  
Pressure Relief ◽  
Working Face ◽  
Rock Structure ◽  
Stress Fluctuation ◽  
Roadway Deformation ◽  
Cutting Height

Affected by the mining activities of the working face, the surrounding rock of the roadway is easily deformed and destroyed. For deep buried roadways, the deformation and destruction of the surrounding rock is particularly prominent. Under the influence of in situ stress fluctuation, 3−1103 tailgate of the Hongqinghe coal mine was in a complex stress environment with a maximum stress exceeding 20 MPa. Affected by mining stress, the roadway behind the working face was seriously deformed. In order to alleviate the deformation of the roadway, directional blasting and cutting measures for the 3−1103 tailgate were adopted in this paper. The mechanism of crack propagation in single-row to three-hole directional blasting was revealed by numerical simulation. The blasted rock was divided into three regions according to the crack condition. The numerical analysis of the cutting heights of 0 m, 10 m, 12 m, and 14 m, respectively, showed the stress peaks of different cutting heights and the deformation law of the surrounding rock. The pressure relief effect was the best at 14 m cutting height. At this time, the peak stress was 39 MPa with the smallest roadway deformation. Based on numerical simulation and theoretical analysis results, engineering tests were carried out. Field monitoring showed that the deformation of the roadway was inversely proportional to the roof cutting height. The higher the cutting height is, the more preferential the roadway is to reach the stable state. It can be concluded that directional blasting can change the surrounding rock structure, control the deformation of the roadway, and play a role in pressure relief. It provides a new measure to control roadway deformation.

scholarly journals Stability Control of Deep Coal Roadway under the Pressure Relief Effect of Adjacent Roadway with Large Deformation: A Case Study

2021 ◽  
Vol 13 (8) ◽  
pp. 4412
Author(s):  
Houqiang Yang ◽  
Nong Zhang ◽  
Changliang Han ◽  
Changlun Sun ◽  
Guanghui Song ◽  
...  
Keyword(s):  
Large Deformation ◽  
Coal Mine ◽  
High Stress ◽  
Surrounding Rock ◽  
Western China ◽  
Engineering Practice ◽  
Pressure Relief ◽  
Coal Roadway ◽  
And Control ◽  
Relief Effect

High-efficiency maintenance and control of the deep coal roadway surrounding rock stability is a reliable guarantee for sustainable development of a coal mine. However, it is difficult to control the stability of a roadway that locates near a roadway with large deformation. With return air roadway 21201 (RAR 21201) in Hulusu coal mine as the research background, in situ investigation, theoretical analysis, numerical simulation, and engineering practice were carried out to study pressure relief effect on the surrounding rock after the severe deformation of the roadway. Besides, the feasibility of excavating a new roadway near this damaged one by means of pressure relief effect is also discussed. Results showed that after the strong mining roadway suffered huge loose deformation, the space inside shrank so violently that surrounding rock released high stress to a large extent, which formed certain pressure relief effect on the rock. Through excavating a new roadway near this deformed one, the new roadway could obtain a relative low stress environment with the help of the pressure relief effect, which is beneficial for maintenance and control of itself. Equal row spacing double-bearing ring support technology is proposed and carried out. Engineering practice indicates that the new excavated roadway escaped from possible separation fracture in the roof anchoring range, and the surrounding rock deformation of the new roadway is well controlled, which verifies the pressure relief effect mentioned. This paper provides a reference for scientific mining under the condition of deep buried and high stress mining in western China.

Numerical Simulation for Destroy Pattern of Surrounding Rock of Circle Tunnel with M-H Coupling Action

2011 ◽  
Vol 71-78 ◽  
pp. 3572-3576
Author(s):  
An Nan Jiang ◽  
Peng Li
Keyword(s):  
Numerical Simulation ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Rock Fracture ◽  
High Stress ◽  
Surrounding Rock ◽  
Zonal Disintegration ◽  
Affecting Factors ◽  
Tunnel Wall ◽  
Shear Belt

The uniform zonal disintegration of surrounding rock is the peculiar phenomena of deep and high stress field, researching the inner mechanism and affecting factors has important meaning for guaranteeing the safety of deep engineering. The paper adopted strain soft Mohr-Coulomb model and carried out numerical simulation of surrounding rock fracture and excavation. The simulation states that along with the unloading time accumulation, the shear belt produced from tunnel wall and developed to inner rock. The corresponding shear stress concentration zone also spread to inner rock and destroy zone increasing. The pore water pressure increasing will accelerate the shear belt developing and increase the destroy degree.

Study on the Supporting Technology of Complex Deep Coal Roadways

2012 ◽  
Vol 524-527 ◽  
pp. 743-746
Author(s):  
Zhi Yang Liu
Keyword(s):  
Large Deformation ◽  
Experimental Test ◽  
High Stress ◽  
Surrounding Rock ◽  
Abscission Layer ◽  
Ground Pressure ◽  
Pressure Water ◽  
Observation Results

Suffering from the effect of the high ground pressure, water spraying from roof surrounding rock or geological tactics such as faults or collapse columns, roadways used to have large deformation, even lead to caving accidents. Based on the supporting research of the above complex conditions, the supporting background of a typical roadway No.202 affected by high stress, water spraying and large faults is analyzed and the corresponding technology is put forward. In addition, the support experimental test is conducted on the roadway, and the observation results show that the convergence of both sides is controlled well, and abscission layer is little.

scholarly journals Research on Control Mechanism of Surrounding Rock of Deep Gob-Side Entry Retaining

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jianxiong Liu ◽  
Jingke Wu ◽  
Yun Dong ◽  
Yanyan Gao ◽  
Jihua Zhang ◽  
...  
Keyword(s):  
Large Deformation ◽  
High Stress ◽  
Original System ◽  
Field Investigation ◽  
Surrounding Rock ◽  
Eccentric Load ◽  
Deformation And Failure ◽  
Body Fracture ◽  
Stress States ◽  
Term Creep

To address the large deformation of the surrounding rock of deep gob-side entry retaining under high stress, lithological characteristics of the surrounding rock and failure model of support body and their evolutionary processes are analyzed through field investigation and theoretical analysis. Failure mechanisms of surrounding rock and the technology to control it are studied systematically. The results show that the causes of the large deformation of the surrounding rock are weak thick mudstones with softening property and water absorption behavior, as well as its fragmentation, dilatancy, and long-term creep during strong disturbance and highly centralized stress states. The cross-section shape of the roadway after deformation and failure of the surrounding rock is obviously asymmetric in both the horizontal and vertical directions. Since the original system supporting the surrounding rock is unable to completely bear the load, each part of the supporting system is destroyed one after the other. The failure sequences of the surrounding rock are as follows: (1) roadway roof fracture in the filling area, (2) filling body fracture under eccentric load, (3) rapid subsidence of the roadway roof, and (4) external crack drum and rib spalling at the solid coal side. Due to this failure sequence, the entire surrounding rock becomes unstable. A partitioned coupling support and a quaternity control technology to support the surrounding rock are proposed, in which the roof of the filling area plays a key role. The technology can improve the overall stability of gob-side entry retaining, prevent support structure instability caused by local failure of the surrounding rock, and ensure the safety and smoothness of roadways.

scholarly journals Research on the Reasonable Strengthening Time and Stability of Excavation Unloading Surrounding Rock of High-Stress Rock Mass

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Wensong Xu ◽  
Wentao Xu ◽  
Yunhai Cheng
Keyword(s):  
Rock Mass ◽  
Plastic Zone ◽  
Failure Process ◽  
High Stress ◽  
Stable State ◽  
Surrounding Rock ◽  
Triaxial Tests ◽  
Uniaxial Compression Test ◽  
True Triaxial ◽  
True Triaxial Tests

This study is aimed at better understanding the deformation and failure mechanism of surrounding rock during excavation unloading of a high-stress rock mass and determining the reasonable reinforcement time for the surrounding rock. To fulfill this aim, true triaxial tests were carried out on different loading and unloading paths during the unilateral unloading of a high-stress rock mass. The variational condition for minimization of plastic complementary energy is obtained, the optimal reinforcement time is determined, and the range of the plastic zone in the surrounding rock reinforced by anchor mesh-cable-grouting is compared and analyzed. The results are as follows: (1) Based on the Mohr-Coulomb yield criterion and the deformation reinforcement theory of surrounding rock, the stable state with the minimum reinforcement force is obtained. (2) After the true triaxial tests on the unilateral unloading of the third principal stress were carried out under different confining pressures, loading continued to be performed. Compared with rock failure without confining pressure, in the conventional uniaxial compression test, the failure of samples is dominated by composite splitting-shear failure; the unilateral unloading stress-concentration failure is a progressive failure process of splitting into plates followed by cutting into blocks and then the ejection of blocks and pieces. (3) The relationship between the time steps of the surrounding rock stability and the excavation distance is obtained. The supporting time can be divided into four stages: presupport stage, bolt reinforcement stage, anchor cable reinforcement stage, and grouting reinforcement stage. (4) In the range of within 5 m behind the tunneling face, the plastic zone of the surrounding rock with support is reduced by 7 m as compared with that with no support. In the range of over 5 m behind the tunneling face, the plastic zone of the roadway floor with support is reduced by 2.6 m as compared with that without support, and the deformation is reduced by 90%. These results can serve as a reference for controlling the behavior of surrounding rock during excavation unloading of high-stress rock masses.

Calculation and Analysis of the TBM Construction Rational Buried Depth

2011 ◽  
Vol 90-93 ◽  
pp. 2803-2807
Author(s):  
Li Na Ma ◽  
Song Hong Yan ◽  
Rong Ling Zhang
Keyword(s):  
Numerical Simulation ◽  
Similar Case ◽  
Surrounding Rock ◽  
Actual Measurement ◽  
Result Analysis ◽  
Primary Support

The sixth Chongqing metro line is taked for example, numerical simulation is applied for finite analysis and calculation, the safety of the primary support and the second lining are calculated respectively in different level of surrounding rock, double hole case,different bedrock and overlying abandon ballastless thickness for 45 cases,and then based on the result analysis and calculate the rational buried deepth of the surrounding rock under the different level, And according to the actual measurement of deformation calculation value and deformation value of hole is used for comparison, reference and basis for the similar case is presented.

scholarly journals Numerical Simulation and Analysis of Tunnel Failure Mode by Stochastic Fracture Model

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Fukun Xiao ◽  
Lei Xu ◽  
Gang Liu ◽  
Zhiyuan Hou ◽  
Le Xing
Keyword(s):  
Numerical Simulation ◽  
Rock Burst ◽  
Monte Carlo Model ◽  
High Stress ◽  
Tectonic Stress ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Structural Plane ◽  
Dip Angle ◽  
The Stability

The dip angle, length, spacing, and fracture distance of rock fissure affect the morphology of roadway after collapse. The numerical simulation software CDEM is used to simulate the morphology of roadway collapse. The Monte Carlo model is used to simulate different types of crack models in two-dimensional plane and generate different crack models. The effects of crack angle, crack length, fracture distance, and spacing on the deformation of surrounding rock are analyzed. The influence of different rock burst on the failure strap-fall modes of fissure roadway and roadway in different sections is analyzed, and the stability law of roadway is studied. Under the condition of high stress, the roadway shape has little influence on the distribution of the principal stress difference of surrounding rock, but the equivalent excavation radius determines the distribution of the plastic zone of surrounding rock. The larger the ineffective reinforcement zone is, the larger the deformation around the roadway will be. The decrease of the angle between the structural plane and the vertical stress increases the failure range of the roadway under the gravity burst pressure. Under the horizontal tectonic stress type rock burst, when the structural plane inclination angle is 0°, the two-sided caving body fills the roadway and the roof caving range becomes smaller.

scholarly journals Stability Control Mechanism of High-Stress Roadway Surrounding Rock by Roof Fracturing and Rock Mass Filling

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Fuzhou Qi ◽  
Zhanguo Ma ◽  
Dangwei Yang ◽  
Ning Li ◽  
Bin Li ◽  
...  
Keyword(s):  
Rock Mass ◽  
Large Deformation ◽  
High Stress ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Vertical Stress ◽  
Mining District ◽  
Coal Bump ◽  
Novel Approach ◽  
Roadway Stability

Large deformation of roadway and coal bump failures have always been the focus in deep underground engineering. By considering the Lu’an mining district in China, the failure mode and stability improvement process of high-stress roadways were analysed with the field tests and numerical simulations. The field test results showed that a great amount of deformation and serious damage occurred in surrounding rocks during panel retreat due to the suspended roof. A novel approach employing roof fracturing and collapsed rock filling effect was adopted to maintain the roadway stability. A numerical model was established with the Universal Distinct Element Code (UDEC) to research the fracturing characteristics between the roadway and gob roofs and the stress change in the surrounding rock. The modelling results demonstrated that, without fracturing roof, the peak vertical stress of the coal pillar was 18.3 MPa and the peak vertical stress of the virgin coal rib was 15.6 MPa. The roadway was in a state of high stress. With fracturing roof, the peak vertical stress of coal pillar was 9.3 MPa and the peak vertical stress of virgin coal rib was 13.4 MPa. The fractured rock mass in the gob expanded in volume and provided supporting resistance to the overlying strata, which relieved stress concentrations in the coal pillar. Field measurement results indicated that the roadway large deformation was successfully resolved during excavation and panel retreat after implementing the novel approach, providing useful references for the application of this novel approach in similar coal mines.

The Surrounding Rock of Deep Borehole Pressure Relief and Let the Pressure Bolt Coupling Analysis

2013 ◽  
Vol 446-447 ◽  
pp. 1421-1424 ◽  
Author(s):  
Shu Guang Zhang ◽  
Long Chen ◽  
Hong Yu Jia
Keyword(s):  
Numerical Simulation ◽  
High Stress ◽  
High Strength ◽  
Surrounding Rock ◽  
Deformation Characteristics ◽  
Deep Borehole ◽  
Pressure Relief ◽  
High Strength Bolt ◽  
Supporting Effect ◽  
Coupling Support

Roadway borehole pressure relief and let the pressure anchor combined support technology were based on using the new pressure high strength bolt instead of ordinary bolt ,Combined with the borehole pressure relief principle, aim at releasing high stress of surrounding rock of roadway ,Complying with the deformation characteristics of supporting technology of the surrounding rock. In this paper, we used scaled numerical simulation technology —— ADINA to analyze the roadway borehole pressure relief and let the pressure anchor coupling support technology. To the tunnel, we used the method of numerical simulation of let the pressure bolt support independently, drilling pressure relief, and borehole pressure relief and let the pressure anchor coupling support three kinds of the comparison numerical simulation. The advantages of coupling supporting effect was elaborated, It was instructive for the deeply roadway engineering in the future.

Sign in / Sign up

Export Citation Format

Share Document