Preparation of Refractory Fiber Cardboard for Building Insulation

2013 ◽  
Vol 357-360 ◽  
pp. 1295-1299 ◽  
Author(s):  
Sha Wang ◽  
Chuan Shan Zhao ◽  
Dai Qi Wang ◽  
Wen Jia Han
Keyword(s):  
Thermal Conductivity ◽  
Raw Materials ◽  
Mass Ratio ◽  
Bonding Agents ◽  
Physical Strength ◽  
Refractory Fiber ◽  
Building Insulation ◽  
Alumino Silicate ◽  
Sepiolite Fiber ◽  
Pva Fiber

A kind of refractory fiber cardboard functioning as building insulation materials was developed. To improve the cardboard abilities to bear high temperature, sepiolite and alumino-silicate fibers were chosen as the raw materials for making refractory fiber carboard. In addition, inorganic adhesives and PVA fiber were used as bonding agents to enhance the physical strength of cardboard. The effect of bonding agents amount on tensile strength of the cardboard were investigated. When choosing inorganic adhesives and PVA fibers as the adhesives, the optimum condition is that amount of aluminum sol and PVA fibers is 30%and 3%-4% by weight, respectively; The best technical conditions for making the refractory fiber cardboard were determined. When the mass ratio of alumino-silicate fibers, sepiolite fiber, PVA fibers is 90: 6: 4, the physical strength of refractory fiber cardboard can be up to 1.556N·m/g. When the bulk density of the cardboard is 305.8kg/m3, the thermal conductivity of insulation cardboard at 200°C is very low, which is only 0.065W/m·K.

scholarly journals Thermal Characterization of Recycled Materials for Building Insulation

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3564
Author(s):  
Arnas Majumder ◽  
Laura Canale ◽  
Costantino Carlo Mastino ◽  
Antonio Pacitto ◽  
Andrea Frattolillo ◽  
...  
Keyword(s):  
Environmental Impact ◽  
Environmental Sustainability ◽  
Building Materials ◽  
Raw Materials ◽  
Natural Fibers ◽  
Thermal Characterization ◽  
Recycled Materials ◽  
Building Insulation ◽  
Operational Phase

The building sector is known to have a significant environmental impact, considering that it is the largest contributor to global greenhouse gas emissions of around 36% and is also responsible for about 40% of global energy consumption. Of this, about 50% takes place during the building operational phase, while around 10–20% is consumed in materials manufacturing, transport and building construction, maintenance, and demolition. Increasing the necessity of reducing the environmental impact of buildings has led to enhancing not only the thermal performances of building materials, but also the environmental sustainability of their production chains and waste prevention. As a consequence, novel thermo-insulating building materials or products have been developed by using both locally produced natural and waste/recycled materials that are able to provide good thermal performances while also having a lower environmental impact. In this context, the aim of this work is to provide a detailed analysis for the thermal characterization of recycled materials for building insulation. To this end, the thermal behavior of different materials representing industrial residual or wastes collected or recycled using Sardinian zero-km locally available raw materials was investigated, namely: (1) plasters with recycled materials; (2) plasters with natural fibers; and (3) building insulation materials with natural fibers. Results indicate that the investigated materials were able to improve not only the energy performances but also the environmental comfort in both new and in existing buildings. In particular, plasters and mortars with recycled materials and with natural fibers showed, respectively, values of thermal conductivity (at 20 °C) lower than 0.475 and 0.272 W/(m⋅K), while that of building materials with natural fibers was always lower than 0.162 W/(m⋅K) with lower values for compounds with recycled materials (0.107 W/(m⋅K)). Further developments are underway to analyze the mechanical properties of these materials.

scholarly journals Synthesis of Metal Organic Frameworks by Ball-Milling

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 15
Author(s):  
Cheng-An Tao ◽  
Jian-Fang Wang
Keyword(s):  
Ball Milling ◽  
Large Scale ◽  
Raw Materials ◽  
Metal Organic Frameworks ◽  
Research Topic ◽  
Mass Ratio ◽  
Time Consumption ◽  
Metal Organic ◽  
Short Time ◽  
Made In

Metal-organic frameworks (MOFs) have been used in adsorption, separation, catalysis, sensing, photo/electro/magnetics, and biomedical fields because of their unique periodic pore structure and excellent properties and have become a hot research topic in recent years. Ball milling is a method of small pollution, short time-consumption, and large-scale synthesis of MOFs. In recent years, many important advances have been made. In this paper, the influencing factors of MOFs synthesized by grinding were reviewed systematically from four aspects: auxiliary additives, metal sources, organic linkers, and reaction specific conditions (such as frequency, reaction time, and mass ratio of ball and raw materials). The prospect for the future development of the synthesis of MOFs by grinding was proposed.

PU composites based on different types of textile fibers

2021 ◽  
pp. 002199832110316
Author(s):  
Nuno Gama ◽  
B Godinho ◽  
Ana Barros-Timmons ◽  
Artur Ferreira
Keyword(s):  
Thermal Conductivity ◽  
Raw Materials ◽  
Natural Fibers ◽  
Tensile Modulus ◽  
High Water ◽  
Textile Fibers ◽  
Synthetic Fibers ◽  
Hydrophilic Nature ◽  
Different Types ◽  
Recycled Composites

In this study polyurethane (PU) residues were mixed with residues of textile fibers (cotton, wool and synthetic fibers up to 70 wt/wt) to produce 100% recycled composites. In addition, the effect of the type of fiber on the performance of the ensuing composites was evaluated. The presence of fibers showed similar effect on the density, reducing the density in the 5.5-9.0% range. In a similar manner, the addition of fillers decreased their thermal conductivity. The 70 wt/wt wool composite presented 38.1% lower thermal conductivity when compared to the neat matrix, a reduction that was similar for the other type of fibers. Moreover, the presence of fillers yields stiffer materials, especially in the case of the Wool based composites, which with 70 wt/wt of filler content increased the tensile modulus of the ensuing material 3.4 times. This was attributed to the aspect ratio and stiffness of this type of fiber. Finally, the high-water absorption and lower thermal stability observed, especially in the case of the natural fibers, was associated with the hydrophilic nature of fibers and porosity of composites. Overall, the results suggest that these textile-based composites are suitable for construction and automotive applications, with the advantage of being produced from 100% recycled raw-materials, without compromised performance.

scholarly journals Preparation and Thermal Conductivity of Epoxy Resin/Graphene-Fe3O4 Composites

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2013
Author(s):  
Zhong Wu ◽  
Jingyun Chen ◽  
Qifeng Li ◽  
Da-Hai Xia ◽  
Yida Deng ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Thermal Conductivity ◽  
Thermal Stability ◽  
Epoxy Resin ◽  
Thermomechanical Properties ◽  
Packaging Materials ◽  
Mass Ratio ◽  
Degree Of Orientation ◽  
Ep Matrix ◽  
Electrical Insulation Properties

By modifying the bonding of graphene (GR) and Fe3O4, a stable structure of GR-Fe3O4, namely magnetic GR, was obtained. Under the induction of a magnetic field, it can be orientated in an epoxy resin (EP) matrix, thus preparing EP/GR-Fe3O4 composites. The effects of the content of GR and the degree of orientation on the thermal conductivity of the composites were investigated, and the most suitable Fe3O4 load on GR was obtained. When the mass ratio of GR and Fe3O4 was 2:1, the thermal conductivity could be increased by 54.8% compared with that of pure EP. Meanwhile, EP/GR-Fe3O4 composites had a better thermal stability, dynamic thermomechanical properties, and excellent electrical insulation properties, which can meet the requirements of electronic packaging materials.

Refractory fiber from cheap raw materials

1978 ◽  
Vol 35 (10) ◽  
pp. 593-596
Author(s):  
Yu. P. Gorlov ◽  
A. A. Ustenko ◽  
M. G. Zvonarev ◽  
V. P. Kondrat'ev
Keyword(s):  
Raw Materials ◽  
Refractory Fiber

Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials

2021 ◽  
Vol 320 ◽  
pp. 181-185
Author(s):  
Elvija Namsone ◽  
Genadijs Sahmenko ◽  
Irina Shvetsova ◽  
Aleksandrs Korjakins
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Raw Materials ◽  
High Strength ◽  
Strength Properties ◽  
Waste Materials ◽  
Mechanical And Thermal Properties ◽  
Experimental Part ◽  
Technogenic Raw Materials ◽  
Caustic Magnesia

Because of low calcination temperature, magnesia binders are attributed as low-CO2 emission materials that can benefit the environment by reducing the energy consumption of building sector. Portland cement in different areas of construction can be replaced by magnesia binder which do not require autoclave treatment for hardening, it has low thermal conductivity and high strength properties. Magnesium-based materials are characterized by decorativeness and ecological compatibility.The experimental part of this research is based on the preparation of magnesia binders by adding raw materials and calcinated products and caustic magnesia. The aim of this study was to obtain low-CO2 emission and eco-friendly material using local dolomite waste materials, comparing physical, mechanical, thermal properties of magnesium binders.

scholarly journals Synthesis of Geopolymer from Inorganic Construction Waste

2013 ◽  
Vol 30 ◽  
pp. 45-51 ◽  
Author(s):  
Arbind Pathak ◽  
Vinay Kumar Jha
Keyword(s):  
Compressive Strength ◽  
Coal Fly Ash ◽  
Chemical Society ◽  
Raw Material ◽  
Curing Temperature ◽  
Alkali Concentration ◽  
Curing Time ◽  
Mass Ratio ◽  
Construction Waste ◽  
Alumino Silicate

Recently, the demolition of old houses and the construction of new buildings in Kathmandu valley are in the peak which in turn generates a huge amount of construction waste. There are two major types of construction wastes which are burden for disposal namely cement-sand-waste (CSW) and the coal fly ash (CFA). These construction wastes are rich source of alumino-silicate and thus used as raw material for the synthesis of geopolymer in this study. Geopolymers have been synthesized from CSW and CFA using NaOH-KOH and Na2SiO3 as activators. Some parameters like alkali concentration, amount of Na2SiO3 and curing time have been varied in order to improve the quality of geopolymeric product. The geopolymerization process has been carried out using 3-8M KOH/NaOH solutions, Na2SiO3 to CFA and CSW mass ratio of 0.25-2.00 and curing time variation from 5-28 days. The curing temperature was fixed at 40ºC in all the cases. 6M NaOH and 7M KOH solutions were found appropriate alkali concentrations while the ratio of sodium silicate to CSW and CFA of 0.5 and 1.75 respectively were found suitable mass ratio for the process of geopolymer synthesis. The maximum compressive strength of only 7.3 MPa after 15 days curing time with CSW raw material was achieved while with CFA, the compressive strength was found to be 41.9 MPa with increasing the curing time up to 28 days.DOI: http://dx.doi.org/10.3126/jncs.v30i0.9334Journal of Nepal Chemical Society Vol. 30, 2012 Page:  45-51 Uploaded date: 12/16/2013    

Development and Research of Thermal Insulation Materials from Natural Fibres

2014 ◽  
Vol 604 ◽  
pp. 285-288 ◽  
Author(s):  
Saulius Vaitkus ◽  
Rūta Karpavičiūtė ◽  
Sigitas Vėjelis ◽  
Lina Lekūnaitė
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Preparation Method ◽  
Raw Materials ◽  
Natural Fibres ◽  
Current Work ◽  
Insulation Materials ◽  
Flax Fibres ◽  
Hemp Fibres

Natural fibres from flax and hemp are used as raw materials for efficient thermal insulation. In current work, tests were carried out using chopped and combed long flax fibres as well as chopped and combed long hemp fibres. Investigations have shown that thermal conductivity of natural fibres depends on their preparation method (combing, chopping) and materials density.

Performance Study of Fiber Reinforced New Lightweight Insulation Materials

2013 ◽  
Vol 662 ◽  
pp. 331-334
Author(s):  
Huan Qi Zhao ◽  
Guo Zhong Li
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Bending Strength ◽  
Raw Materials ◽  
The Self ◽  
Performance Study ◽  
Foaming Agent ◽  
Insulation Materials ◽  
Influencing Mechanism ◽  
Coefficient Of Thermal Conductivity

Cement-based lightweight insulation materials were made. Cement and fly ash are main raw materials. The self-developed composite excitation agent and foaming agent are used. The method of foaming is the physical foaming. The inflection of fiber dosage on the performance of lightweight insulation materials was researched. Its influencing mechanism was discussed. Experiments show that foaming lightweight insulation materials were made with 1.22MPa bending strength, 2.95MPa compressive strength and the 0.072W/mk coefficient of thermal conductivity when the fiber mixing content is 1.2%.

Reduction Design for Corrugated Box - Local Composite Strengthening Technology

2013 ◽  
Vol 655-657 ◽  
pp. 52-59
Author(s):  
Jian Hua Xu ◽  
Zhi Jian Xiao ◽  
Adan Zhuang
Keyword(s):  
Compressive Strength ◽  
Composite Materials ◽  
Raw Materials ◽  
Weight Bearing ◽  
Production Costs ◽  
Low Carbon ◽  
Physical Strength ◽  
Low Carbon Economy ◽  
Traditional Process ◽  
Carbon Economy

The reduction design is an important orientation for the design and development of corrugated box in the low-carbon economy era. Concentrating on 02 pattern corrugated box, and in accordance with the weight-bearing principle of cartons and intended strength requirements, this paper conducts the local strengthened composition on the corrugated box casing and enhances the physical properties of cartons in circulation, stacking, storage, and other aspects, which achieves the same physical strength as the traditional process but with less raw materials. The conclusions are drawn as follows on the basis of experimental and production cases: under the premise of selecting appropriate composite materials and processes, the use of the local composite strengthening technology in corrugated box casing can produce the carton with the same compressive strength while lowering more than 15% production costs than the conventional process. The study will provide some guidance to the reduction design of the corrugated box.

Sign in / Sign up

Export Citation Format

Share Document