Design and Implementation of the Medium and Long-Term Time Scale System Frequency Fluctuations Simulation Platform

2013 ◽  
Vol 392 ◽  
pp. 656-659
Author(s):  
Ting Yu ◽  
Zhao Yu Jin ◽  
Ying Yun Sun ◽  
Jing Huai Lin ◽  
Tian Jiao Pu
Keyword(s):  
Mathematical Model ◽  
Wind Power ◽  
Power Plants ◽  
Frequency Control ◽  
Thermal Power ◽  
Clean Energy ◽  
Simulation Software ◽  
Stable Operation ◽  
Simulation Platform ◽  
The Impact

Large-scale wind power integrates in the grid to provide clean energy; however, it has a negative impact on the stable operation of the grid. To analysis the effect of wind power on frequency control, we need the help of simulation software. But, there has no frequency control mathematical model of wind farm in simulation software available for the user to choose. So this paper designs and establishes a frequency simulation platform, which provides the frequency control mathematical model of wind farms, hydroelectric power plants and thermal power plants. It can not only evaluate the impact of wind power fluctuations on frequency control, but also can quantitatively analysis of the system reserve capacity, as well as AGC performance monitoring function.

scholarly journals Techno-economic analysis and modelling of the feasibility of wind energy in Kuwait

2022 ◽  
Vol 7 ◽  
pp. 9
Author(s):  
Seyed Amir Kaboli ◽  
Reyhaneh Nazmabadi
Keyword(s):  
Power Generation ◽  
Economic Analysis ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Plants ◽  
Clean Energy ◽  
Wind Power Generation ◽  
Generation Capacity ◽  
The Impact

There continues to be significant attention and investment in wind power generation, which can supply a high percentage of the global demand for renewable energy if harvested efficiently. The research study is based on techno-economic analysis of the feasibility of implementing wind power generation in Kuwait with a power generation capacity of 105 MW based on 50 wind turbines, which has a major requirement for clean energy. The study focused on three main areas of analysis and numerical modeling using the RETScreen software tool. The first area involved evaluating the performance and efficacy of generating wind power by collecting, analyzing, and modeling data on observed wind levels, wind turbine operation, and wind power generation. The second area comprised an environmental impact review to assess the environmental benefits of implementing wind power. The third area involved economic analysis of installing wind power in Kuwait. The analysis was undertaken to assess the energy recovery time for wind energy and determine the mitigation of global warming and pollution levels, the decrease of toxic emissions, and any cost savings from implementing clean energy systems in Kuwait. Additionally, sensitivity analysis was undertaken to determine the impact of certain variables in the modeling process. The results are used to estimate that the energy price would be $0.053 per kWh for a power generation capacity of 105 MWh based on an initial cost of $168 million and O&M of $5 million for 214,000 MWh of electricity exported to the grid. Moreover, the wind turbine farm will potentially avoid the emission of approximately 1.8 million tonnes of carbon dioxide per year, thereby saving approximately $9 million over 20 years spent installing carbon capture systems for conventional power plants. The wind farm containing a simple wind turbine is estimated to have a payback period of 9.1 years.

scholarly journals The impact of climatic extreme events on the feasibility of fully renewable power systems: a case study for Sweden

2018 ◽  
Author(s):  
Stefan Höltinger ◽  
Johann Baumgartner ◽  
Christian Mikovits ◽  
Johannes Schmidt ◽  
Berit Arheimer ◽  
...  
Keyword(s):  
Time Series ◽  
Power Systems ◽  
Wind Power ◽  
Extreme Events ◽  
Power Plants ◽  
Thermal Power ◽  
Physical Models ◽  
Cold Weather ◽  
Pv Generation ◽  
The Impact

Future energy systems with high shares of intermittent renewables will be stressed by climatic extreme events. We assess the frequency, duration, and magnitude of such extreme residual load events with a share of VRE generation of about 50% for the case of Sweden. For our analysis, we use 29 years of river runoff and of wind power and PV generation simulated from physical models. Hourly load is simulated from temperature data with a time series model. The resulting time series are combined with historic capacity and ramping restrictions of hydro and thermal power plants in an optimization model to minimize extreme residual load events. Results indicate that under high VRE shares climatic extreme events affect even highly flexible power systems as the Swedish one. Replacing current nuclear power capacities by wind power results on average in three extreme residual load events per year. These events are partly linked to the observation that wind speeds are likely below seasonal average in very cold weather conditions. Deploying PV generation capacities instead of wind increases the number of extreme residual load events by about 6 %, as most events occur during the winter month when solar generation is close to zero.

scholarly journals A Speed-Governing System Model with Over-Frequency Protection for Nuclear Power Generating Units

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 173 ◽  
Author(s):  
Li Wang ◽  
Wentao Sun ◽  
Jie Zhao ◽  
Dichen Liu
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Power Grid ◽  
Simulation Software ◽  
System Model ◽  
Total Power ◽  
Stable Operation ◽  
Thermal System ◽  
Governing System ◽  
The Impact

Overspeed is more likely to occur in the process of load rejection or large disturbances for nuclear steam turbines due to the large parameter range and low steam parameters, as well as the power of the low-pressure cylinder accounting for a high proportion of the total power. It is of great significance to study the overspeed characteristics of nuclear power plants (NPPs) to ensure the safe and stable operation of the unit and power grid. According to the characteristics of NPPs, the overspeed protection model and the super-acceleration protection model were established, which were added to the speed-governing system model. The response characteristics of the reactor, thermal system, steam turbine and speed-governing system in the process of load rejection or large disturbances of the power grid were analyzed and simulated. The results were compared using the simulation software personal computer transient analyzer (PCTRAN). The simulation results showed that quickly closing both the high and medium pressure regulating valves could effectively realize frequency control when load rejection or a large grid disturbance occurred. The over-acceleration protection cooperates with the super-acceleration protection to avoid the repeated opening/closing of the valves due to overspeed protection. This could effectively reduce the impact of large disturbances on the reactor, thermal system, and turbine.

Study on Transient Stability Simulation of District Grid Containing High Proportion of Wind Power

2014 ◽  
Vol 1070-1072 ◽  
pp. 275-278
Author(s):  
Li Lin ◽  
Shuang Zhao ◽  
Meng Ze Yu ◽  
Bo Jian Ding
Keyword(s):  
Wind Power ◽  
Power Plants ◽  
Large Scale ◽  
Wind Farm ◽  
Fault Location ◽  
Transient Stability ◽  
Thermal Power ◽  
Wind Farms ◽  
Operating Modes ◽  
The Impact

As wind is random, intermittent and instability, with continual installation of wind farms, the impact of large scale wind farm on power system has become an important issue for integration and operation of wind farm. Aiming at studying the transient stability of district grid containing high proportion of wind power, numerical simulations with BPA for an actual district grid of China Southern Power Grid are presented. In these simulations, the interaction between the large-scale wind farm and traditional thermal power plants (TPPs) is investigated taking the different operating modes and fault location into account. The critical clearing time (CCT) is adopted as the measurable indicator to assess the interaction.

scholarly journals The Prospects for Wind Energy Development in the Republic of Belarus

2019 ◽  
Vol 62 (2) ◽  
pp. 124-134 ◽  
Author(s):  
Y. S. Petrusha ◽  
N. A. Papkova
Keyword(s):  
Power Generation ◽  
Wind Energy ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Plants ◽  
Thermal Power ◽  
Utilization Factor ◽  
Wind Power Plants ◽  
Joint Application ◽  
The Impact

The use of wind turbines to create wind energy is one of the main alternatives to the traditional technologies of power generation. The exclusion of combustion products emissions at thermal power plants that operate on hydrocarbon fuel, as well as the exclusion of the fuel component of the cost of electricity generation makes the wind power technology very attractive. However, the rigor of the operation requirements of wind turbines as part of power systems, low density of the flow of primary energy source and the lack of control of it, low utilization of installed capacity, limited operating life, shutdowns in the conditions of squally gusts of wind and ice formation, large areas of alienated land, the impact of noise and infrasonic vibrations and the problems of utilization of large-size structural elements and foundations require a comprehensive analysis of conditions of wind turbines application. Despite the absence of desert areas and of restrictions on the construction of ultra-high structures the analysis of natural and climatic conditions of Belarus demonstrates favorable natural and landscape conditions for the development of wind power generation. The principal task is to choose the location of wind power plants with due regard to environmental requirements, temperature and humidity conditions, terrain and geological features of the location. The results of calculations of the wind flow conditions showed the preference for the joint application of the Weibull and Rayleigh functions that provide the confidence interval of the approximation of the wind speed function, while the terrain specific features make it possible to expect to obtain higher values of the established capacity utilization factor. The development of a distributed energy generation accompanied by Smart Grid technology wide use over electric networks (which would provide new opportunities for consumers and make it possible to eliminate the monopoly of powerful power plants and to reduce burden of basic costs of big power production) ought to be considered as obvious prospect of wind power plants application.

scholarly journals Comparative analysis of the impact of objects of traditional and alternative energy on the environment

2021 ◽  
pp. 58-63
Author(s):  
Yuliya S. Borisova ◽  
Nataliya S. Samarskaya
Keyword(s):  
Comparative Analysis ◽  
Power Plant ◽  
Wind Power ◽  
Alternative Energy ◽  
Power Plants ◽  
Negative Impact ◽  
Thermal Power ◽  
Energy Sources ◽  
Wind Power Plant ◽  
The Impact

Introduction. Active withdrawal of energy raw materials from the subsoil, as well as technogenic impact from energy sources based on traditional fuel, lead to irreversible environmental consequences. To minimize this impact, it is necessary to start from two main conditions: the search for alternative energy sources and the improvement of the existing ones. Problem Statement. The objective of this study is a comparative analysis of energy facilities in order to identify the plant that has the greatest negative impact on the environment. Theoretical part. The comparative analysis of various energy production systems reflects the ecological and economic components of each. For example, a thermal power plant (TPP), a nuclear power plant (NPP) and a wind power plant (WPP) are considered. The negative impact on the environment is mainly exerted on the atmospheric air, in connection with which the data on the amount of pollutants are considered. Also, a modified Leopold matrix was constructed for an expert assessment of the mentioned stations. Conclusions. The results of the analysis show that among the considered power plants, the wind power plant is the most environmentally friendly and favorable for the health of the population.

scholarly journals Techno-Economic Analysis and Modelling of the Feasibility of Wind Energy in Kuwait

2022 ◽  
Vol 4 (1) ◽  
pp. 14-34
Author(s):  
Ali M. H. A. Khajah ◽  
Simon P. Philbin
Keyword(s):  
Power Generation ◽  
Economic Analysis ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Plants ◽  
Clean Energy ◽  
Wind Power Generation ◽  
Environmental Benefits ◽  
The Impact

There continues to be significant attention and investment in wind power generation, which can supply a high percentage of the global demand for renewable energy if harvested efficiently. The research study is based on a techno-economic analysis of the feasibility of implementing wind power generation in Kuwait for 105 MW of electricity generation based on 50 wind turbines, which is a major requirement for clean energy. The study focused on three main areas of analysis and numerical modelling using the RETScreen software tool. The first area involved evaluating the performance and efficacy of generating wind power by collecting, analysing, and modelling data on observed wind levels, wind turbine operation, and wind power generation. The second area comprised an environmental impact report to assess the environmental benefits of implementing wind power. The third area involved economic analysis of installing wind power in Kuwait. The analysis was undertaken to determine the energy recovery time for wind energy and determine the mitigation of global warming and pollution levels, the decrease of toxic emissions, and any cost savings from implementing clean energy systems in Kuwait. Additionally, sensitivity analysis was undertaken to determine the impact of certain variables in the modelling process. The results were used to estimate that the energy price would be $0.053 per kWh for a power generation capacity of 105 MWh based on an initial cost of US $168 million and O&M of $5 million for 214,000 MWh of electricity exported to the grid. Moreover, the wind turbine farm will potentially avoid the emission of approximately 1.8 million t of carbon dioxide per year, thereby saving about $9 million over 20 years spent through installing carbon capture systems for conventional power plants. The wind farm is estimated to have a payback time of 9.1 years.

scholarly journals Impact of the Wind Turbine on the Parameters of the Electricity Supply to an Agricultural Farm

2021 ◽  
Vol 13 (13) ◽  
pp. 7279
Author(s):  
Zbigniew Skibko ◽  
Magdalena Tymińska ◽  
Wacław Romaniuk ◽  
Andrzej Borusiewicz
Keyword(s):  
Power Plant ◽  
Wind Turbine ◽  
Wind Power ◽  
Rural Areas ◽  
Power Plants ◽  
Reactive Power ◽  
Supply Voltage ◽  
Common Source ◽  
Voltage Fluctuations ◽  
The Impact

Wind power plants are an increasingly common source of electricity located in rural areas. As a result of the high variability of wind power, and thus the generated power, these sources should be classified as unstable sources. In this paper, the authors attempted to determine the impact of wind turbine operation on the parameters of electricity supplied to farms located near the source. As a result of the conducted field tests, variability courses of the basic parameters describing the supply voltage were obtained. The influence of power plant variability on the values of voltage, frequency, and voltage distortion factor was determined. To estimate the capacity of the transmission lines, the reactive power produced in the power plant and its effect on the value of the power factor were determined. The conducted research and analysis showed that the wind power plant significantly influences voltage fluctuations in its immediate vicinity (the maximum value registered was close to 2%, while the value required by law was 2.5%). Although all the recorded values are within limits specified by the current regulations (e.g., the THD value is four times lower than the required value), wind turbines may cause incorrect operation of loads connected nearby. This applies mainly to cases where consumers sensitive to voltage fluctuations are installed in the direct vicinity of the power plant.

scholarly journals Can Hydropower Still Be Considered a Clean Energy Source? Compelling Evidence from a Middle-Sized Hydropower Station in China

2019 ◽  
Vol 11 (16) ◽  
pp. 4261 ◽  
Author(s):  
Xuerong Li ◽  
Faliang Gui ◽  
Qingpeng Li
Keyword(s):  
Power Plants ◽  
Thermal Power ◽  
Construction Materials ◽  
Ghg Emissions ◽  
Energy Resource ◽  
Clean Energy ◽  
Hydropower Station ◽  
Intergovernmental Panel ◽  
Fossil Carbon ◽  
Global Economic Growth

The development of clean energy is of great importance in alleviating both the energy crisis and environmental pollution resulting from rapid global economic growth. Hydroelectric generation is considered climate benign, as it neither requires fossil carbon to produce energy nor emits large amounts of greenhouse gases (GHG), unlike conventional energy generation techniques such as coal and oil power plants. However, dams and their associated reservoirs are not entirely GHG-neutral and their classification as a clean source of energy requires further investigation. This study evaluated the environmental impact of the Xiajiang hydropower station based on life cycle assessment (LCA) according to the 2006 Intergovernmental Panel on Climate Change (IPCC) guidelines, focusing specifically on GHG emissions after the submersion of the reservoir. Results reveal that although hydropower is not as clean as we thought, it is still an absolute “low emissions” power type in China. The amount of GHG emissions produced by this station is 3.72 million tons with an emissions coefficient of 32.63 g CO2eq/kWh. This figure is lower than that of thermal power, thus implying that hydropower is still a clean energy resource in China. Our recommendations to further minimize the environmental impacts of this station are the optimization of relevant structural designs, the utilization of new and improved construction materials, and the extension of farmland lifting technology.

Sign in / Sign up

Export Citation Format

Share Document